FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing -...
$226.80
$252.00
Reduce the drag and wind noise over the roof rack of your Toyota Rav4 with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Rav4 Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 172mm (6.8") W x 203mm (8") H
Weight:3.25kg (7.2lbs)
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack 40 Light Bar...
$226.80
$252.00
The Slimsport Rack Wind Fairing is specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Light Bar Wind Fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
Durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Consists of:1 x Toyota Rav4 Slimsport Rack 40" Light Bar Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 178mm (7") W x 161mm (6.3") H
Weight:4.94kg (10.9lbs)
FRONT RUNNER Toyota Tundra Crew Cab (2022-Current) Slimsport Rack Wind...
$225.90
$251.00
A wind fairing for the Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab Slimsport Rack Wind Fairing
1 x Fitment Guide
1 x Installation Hardware
Materials used:
Black powder coated steel
Product Dimensions:
1460mm (57.5") L x 250mm (9.8") W x 50mm (2") H
Weight:
4.7kg (10.3lbs)
FRONT RUNNER Toyota Tundra (2022-Current) Slimsport Rack 40In Light Bar...
$225.90
$251.00
Lightbar wind fairing for Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab (2022-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:
4.2kg (9.3lbs)
ALPINE S2-Series 8" Dual Voice Coil Subwoofer - S2-W8D4
$224.96
$249.95
ALPINE S2-SERIES 8" DUAL VOICE COIL SUBWOOFER-S2-W8D4
Enhance your sound system’s performance with the remarkable S-Series S2-W8D4 8″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 8-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W8D4 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W8D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W8D4 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W8D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W8D4 8″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W8D4 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 300W RMS / 900W Peak
Nominal Impedance: 4Ω
Frequency Response: 23Hz – 215Hz
Sensitivity (1W/1M): 82.7dB
Voice Coil: 35.56mm
X-Max (1-Way): 13mm
Magnet Weight: 0.963kg
ALPINE S2-Series 8" Dual Voice Coil Subwoofer - S2-W8D2
$224.96
$249.95
ALPINE S2-SERIES 8" DUAL VOICE COIL SUBWOOFER-S2-W8D2
Enhance your sound system’s performance with the remarkable S-Series S2-W8D2 8″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 8-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W8D2 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W8D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W8D2 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W8D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W8D2 8″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W8D2 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 300W RMS / 900W Peak
Nominal Impedance: 2Ω
Frequency Response: 23Hz – 215Hz
Sensitivity (1W/1M): 82.6dB
Voice Coil: 35.56mm
X-Max (1-Way): 13mm
Magnet Weight: 0.963kg
FRONT RUNNER Wolf Pack Pro Storage Boxes – Quad Set...
$224.10
$249.00
Front Runner Wolf Pack Pro Storage Box – Quad Set (4 Pack)
Maximise your storage with durable, stackable organisation. The Front Runner Wolf Pack Pro Quad Set includes four heavy-duty storage boxes designed to keep your gear secure, organised, and protected in any environment.
Built from impact-resistant plastic and featuring upgraded secure latches, these storage boxes are ideal for 4WD touring, camping, trade use, and everyday storage.
Key Benefits
Set of 4 stackable storage boxes for maximum value
Impact-resistant construction for long-lasting durability
Secure latching system keeps contents protected
Space-efficient design with vertical sides to reduce wasted space
Stackable lids for stable and secure storage
Suitable for vehicle, garage, and outdoor use
Product Overview
The Wolf Pack Pro is designed for efficient storage and transport of gear across a wide range of applications. Whether mounted in a cargo area, stored on a roof rack, or used in a workshop, these boxes provide reliable organisation without compromising space.
The improved latch system ensures a tight seal, helping protect your equipment from dust, dirt, and harsh conditions.
Built for Practical Use
Integrated handles for easy carrying and handling
Stackable design for compact storage in vehicles or storage areas
Ideal for camping gear, tools, recovery equipment, and more
Suitable for exterior use including roof rack setups
System Compatibility
Compatible with Front Runner Transit Bags (holds 2–3 units depending on size)
Works with Front Runner drawer systems for organised vehicle storage
Can be used with rack mounting brackets, Stratchits, and tie-down systems
Compatible with foam dividers or flat packs for fragile items
Important Notes
Wolf Pack Pro boxes are not stackable with standard Wolf Pack models
Due to the sealed design, lids may require slight pressure to open
What’s Included
4 x Front Runner Wolf Pack Pro Storage Boxes
Specifications (Per Unit)
Material: Black polypropylene plastic
External Dimensions: 51 cm (L) x 40 cm (W) x 23 cm (H)
Internal Dimensions: 44.5 cm (L) x 33.5 cm (W) x 20.3 cm (H)
Weight: 3.65 kg per box
Why Choose Wolf Pack Pro
Durable storage solution built for tough conditions
Flexible use across vehicles, workshops, and outdoor setups
Trusted system used in premium 4WD storage solutions
Efficient design to maximise usable storage space
FAQs
Are these waterproof?They feature a secure seal to help protect against dust and dirt, but are not fully waterproof.
Can these be used on a roof rack?Yes, they are suitable for roof rack storage when properly secured.
Can I stack them?Yes, they are designed to stack securely using the lid and base design.
Are they compatible with standard Wolf Pack boxes?No, Wolf Pack Pro boxes are not stackable with standard Wolf Pack models.
Upgrade Your Storage Setup
Organise your gear with a durable, stackable storage solution built for real-world use. The Wolf Pack Pro Quad Set delivers reliability, flexibility, and value for any setup.
FRONT RUNNER Toyota Hilux Vigo Double Cab (2005-Current) Rear Seat...
$224.10
$249.00
Keep your passports, cash, valuable travel documents, and mobile devices out of sight and locked tight in this under the seat all steel vehicle safe.
All vehicle based adventures require you to carry valuables. Don’t leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft.
The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor, yet is still easily accessible.
Manufactured with black powder coated 2mm thick steel.
Designed and built in South Africa - a country where crime deterrence is an art form.Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Consists of:1 x Safe1 x Cam Lock incl. 2 keysInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:260mm (1.02") L x 500mm (19.7") W x 70mm (2.8") H (incl. lock)Opening Dimensions:156mm (6.1") L x 334mm (13.2") WWeight:2.44kg (5.4lbs)
MSA 4X4 Right Power Panel (Passenger Side) - EPP-LEFT
$223.20
$248.00
MSA 4x4 Left Power Panel (Passenger Side)- EPP-LEFT
These pre-wired, 3-Way Power Panels are designed to replace the Wing Face Plates and attach them to the Wing Kit Brackets on the sides of an MSA 4X4 Storage Drawer System. Creating a perfectly flush finish and include:
3 x labelled, illuminated Rocker switches (Water Pump, Compressor and Aux Light) and 2 spare switch covers (1 x Fridge and 1 x Inverter)
2 Port 4.2A (combined) USB charging outlets
2 x cigarette lighter sockets
Illuminated auxiliary battery voltage display
Angled sockets to suit being installed on the front of a set of drawers, so that accessory plugs in use, do not hit the vehicle tailgate or wagon doors
Pre-wired for faster installation
Unique injection-moulded backing plate which protects the back of the switches and wiring from loose items stored under the Storage Drawer Wings
FRONT RUNNER Suzuki Jimny (2018-Current) Ladder - LASJ004
$222.30
$247.00
Everybody wants to get the much-liked shot of someone standing on the roof or rack when in a fantastic setting, but how do you get up there? With Front Runner's 4-step ladder, of course. It has rubber grips on both the top and bottom steps and has been powder-coated black for an attractive finish. Accessing your camping or adventure gear on your rack has never been easier.
This ladder bolts to the rear swing door and existing points of a Suzuki Jimny (2018-Current).
Suitable for the 3 door and 5 door models.
The ladder has 4 steps.
Rubbers grips on the top and bottom steps.
Length from bottom step to top step is 950mm / 37.4".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Suzuki Jimny Ladder
Installation Hardware
Fitment Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
490mm (19.3") L x 135mm (5.3") W x 950mm (37.4") H
Weight:
3.15kg (6.9lbs)
Load Rating:
110kg (242.5lbs)
FRONT RUNNER Quick Release 270˚ Awning Bracket - RRAC323
$220.50
$245.00
If you need to quickly fit or remove the 270˚ Awning from your Front Runner rack, these Quick Release 270˚ Awning Brackets are the best way. Once installed on a rack, you need nothing else to fit or remove the awning. Just release or secure the latches, and you can fit or remove the awning in seconds
A set of Quick Release brackets to secure your 270˚ Awning.
Two (2) base brackets are bolted to the side profile of your Slimline II rack, while the self-aligning bushes are secured to the awning base.
Once these brackets are installed on a Front Runner Rack, no additional tools are needed to remove or refit the awning.
Simply release the 2 latches and lift the awning off in seconds.
No more wrenching in tight spaces during the “off-season” or time-consuming weekday removals of the awning.
The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted, Leaving vast rack space available.
No awning modification required.
Supplied with all required mounting hardware.
Fitting instructions are included.
Weight limit: 30kg (66 lbs).
Note: Always ensure your 270˚ awning is secured down via guy ropes in case of any gusts of wind.
Consists of:2 x Latch Plates2 x Base BracketsHardware KitFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:137mm (5.3") L x 140mm (5.5") W x 188mm (7.4") H (per Bracket)
Weight:1Kg (2.2lbs)
Load Rating: 30Kg (66lbs)
MSA 4X4 Battery Box Slimline - 40019
$220.50
$245.00
MSA 4x4 Battery Box Slimline- 40019
The MSA 4X4 Battery Box is a safe, secure and versatile solution for adding an auxiliary power supply to a vehicle.
The neat and compact design makes a perfect addition to an MSA 4X4 Storage Drawer System. It can be positioned out of sight under side wing kits yet still easily accessible or fitted universally inside a trade canopy. Available in two sizes, Large to fit standard N70, AGM or Lithium batteries and Slimline for smaller Lithium batteries.
The mounting Plate is designed to attach to the drawers with Backing Plates for adjustable positioning of the Battery Box, gaining support from the drawer and alleviating the need to drill through the floor of the tray.
An insulated Lid prevents any issues that could arise from exposed Battery terminals. Both ends of the Battery Box have Protective foam insert panels, with entry and exit points for wiring to the battery.
Adjustable Plastic dipped Securing Saddles bolt down from the top to hold the battery in place. A secure mounting plate is supplied and can be installed at either end. Perfect for mounting a Compressor, BC/DC charger or Fuse box.
FEATURES:
2mm powder-coated steel construction
Height Adjustable mounting Plate
Protective foam insert panels,
2x Battery Securing Saddles offering a solid and secure fit
Insulated Rubber Lid
Compressor, BC/DC charger, or fuse box Mounting plate
INCLUDES:
MSA 4X4’s Lifetime Guarantee
FRONT RUNNER Narrow Wind Faring For Rack / 1165Mm/1255Mm(W) -...
$219.60
$244.00
To reduce roof rack wind noise and aid the efficient air movement over your rack.. The quick-to-fit Narrow Wind Fairing for Rack will do just that and fits the 1165mm and 1255mm wide trays.
A wind fairing for the narrow 1165mm and 1255mm trays.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. A protective vinyl strip is included to protect vehicle paint.
Brackets and installation hardware included.
Features
Consists of:
1 x Low Profile Wind Fairing
1 x Protection Strip
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
87mm (3.4") L x 950mm (37.4") W x 200mm (7.9") H
Weight:
1.53kg (3.4lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack 40In...
$217.80
$242.00
Improve the performance of the Slimsport Rack on your Ram 1500 with this useful Light Bar Ready Wind Fairing. It accommodates a Slim 40" LED Light Bar while massively reducing wind noise and fuel consumption allowing easy airflow over the rack and accessories. It's a great way to quieten your ride.
Lightbar wind fairing for RAM 1500 Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1370mm (53.9") L x 200mm (7.9") W x 177mm (7") H
Weight:
4kg (8.8lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack Wind...
$217.80
$242.00
Enhance the performance of the Slimsport Roof Rack on your Ram 1500 with this smart Rack Wind Fairing. It will massively reduce wind noise and fuel consumption while allowing easy airflow over your rack and accessories-a great way to quieten your ride.
A wind fairing for the RAM 1500 Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack Wind Fairing
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1371mm (54") L x 222mm (8.7") W x x 210mm (8.3") H
Weight:
4.4kg (9.7lbs)
POLYAIR Bellows Air Bag Cradle Kit. - ABC102
$217.80
$242.00
This airbag cradle kit is specifically designed to allow your 75-79 series to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveller.
Do you need maximum wheel travel with no down travel restrictions? then this is the Airbag kit for you
Compatibility
HOLDEN
ISUZU
MAZDA
TOYOTA
POLYAIR Bellows Air Bag Cradle Kit W/ Reinforcement Plate -...
$242.00
This airbag cradle kit is specifically designed to allow your 75-79 series to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveller.
Do you need maximum wheel travel with no down travel restrictions? then this is the Airbag kit for you
CompatibilityTOYOTA
POLYAIR Bellows Air Bag Cradle Kit. - ABC100
$242.00
This Airbag Cradle kit is specifically designed to fit the 88206-2 & 88206-2R kits for the RG Colorado & Isuzu Dmax "No Drill" Bellow kits. The Airbag Cradle is specifically designed to allow your leaf sprung vehicle to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveler.
Compatibility
FORD AUSTRALIA
MAZDA
NISSAN
TOYOTA
FRONT RUNNER Wind Fairing For Low Profile Rack / 1345Mm/1425Mm(W)...
$215.10
$239.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1262mm (49.7") L x 2mm (0.1") W x 127mm (5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER Recovery Device And Gear Holding Side Brackets -...
$215.10
$239.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:4.88 kg (10.8 lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
