FRONT RUNNER Nissan Patrol Load Bar Kit / Gutter Mount...
$416.00
$520.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRNP009 - Nissan Patrol Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1455mm (57")
Height 170mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)
FRONT RUNNER Nissan Patrol Y60 Slimline Ii Roof Rack Kit...
$2,019.20
$2,524.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y60 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This rack kit is not suitable for under rack table fitment.
Features
KRNP010L - Nissan Patrol Y60 Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
4x LASS102 - No 2 Leg 130mm (Pair)
1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.76kg (92.06lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 40.72kg (90lbs)
FRONT RUNNER Nissan Patrol Y61 3 Door (1998-2010) Slimline Ii...
$1,683.20
$2,104.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the Nissan Patrol Y61. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRNP012T - Nissan Patrol Y61 3 Door (1998-2010) Slimline II R
Consisting of:
4x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG09 - SLII Tray - 1345mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 34.46kg (75.97lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1730mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 36kg (79lbs)
FRONT RUNNER Nissan Patrol Y61 Single Cab Slimline Ii Roof...
$894.40
$1,118.00
This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 Single Cab contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the Nissan Patrol Y61 Single Cab. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRNP013T - Nissan Patrol Y61 Single Cab Slimline II Roof Rack
Consisting of:
1x LASD102 - No 2 Leg Diagonal 130mm (Pair)1x LASS101 - No 1 Leg 120mm (Pair1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 18.59kg (40.98lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18"); Length: 1720mm (68"); Height: 160mm (6")
Shipping Weight:
Weight: 22kg (48lbs)
FRONT RUNNER Nissan Patrol Y61 Slimline Ii Roof Rack Kit...
$1,915.20
$2,394.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRNP004L - Nissan Patrol Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x No 1 Leg 120mm (Pair) - by Front Runner
1 x No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 39.2kg (86.2lbs)
FRONT RUNNER Nissan Patrol Y61 Slimline Ii Roof Rack Kit...
$1,982.40
$2,478.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRNPT06L - Nissan Patrol Y61 Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
2x LASS027 - Leg Spacer 6mm (Pair)4x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG11 - SLII Tray - 1345mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.17kg (86.35lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 40.03kg (88lbs)
FRONT RUNNER Nissan Patrol/Armada Y62 (2010-Current) Slimline Ii Roof Rack...
$2,023.20
$2,529.00
This 2166mm/85.3 long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Patrol/Armada Y62. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRNP011T - Nissan Patrol/Armada Y62 (2010-Current)SlimlineIIRoof Rack Kit - by Front Runner
Consisting of:
1 x FANP001 - Nissan Patrol/Armada Y62 (2010-Current) Foot Rails - by Front Runner
1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 39kg (86lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 240mm (9")
Shipping Weight:
Weight: 45.2kg (99.4lbs)
POLYAIR Standard Red Series Airbag Kit, Nissan Patrol - 92094
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Nissan - Patrol Y62 - 2013-on
POLYAIR Standard Red Series Airbag Kit, Nissan Patrol - 72806
$435.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Nissan - Patrol GQ + GU (Y60/Y61) 1988-on, LEAF SPRING
POLYAIR Standard Red Series Airbag Kit, Nissan Patrol - -...
$435.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Nissan - Patrol 1980 - 1989, MQ
POLYAIR 2" Lift Red Series Airbag Kit, Nissan Patrol -...
$405.00
POLYAIR LOAD ASSIST AIR SPRING To Suit
Nissan Patrol
GQ - GU LWB/Coil Spring Cab Chassis with 2'' Raised Suspension
Load assist air spring kits are the easy, affordable way to keep your vehicle level and your ride smooth regardless of load or road condition. A level, stable vehicle means better braking, steering, and headlight aim. Load assist air springs also reduce sway, “porpoising” and bottoming out while maximizing ride comfort.
The kit includes two durable, easy to install air springs that provide a load leveling capacity up to 450 Kg. Designed to work together or interdependently, these two air springs support your vehicle’s rear suspension. By using load assist air bags you can guarantee a safe, smooth and level ride every time.
Air Lift 1000 air springs fit inside your front or rear coil suspension or between leaf spring and chassis rail to provide suspension support when and where you need it.
The Polyair kit does not replace the original coil spring but works with it, original springs tend to sag from wear or from overloading.
Simply add air to the air springs when hauling a heavy load to ensure that your vehicle is level and stable. Then, deflate when you are driving with an empty load for better ride quality.
For all 4WD, Work vans, Twin Cabs and Cars, the springs are fully adjustable from 5 to 35 PSI via air line tubing.
The kit includes 2 air springs, quick-connecting user-friendly air fittings, brackets, air lines and all of the hardware you need. To install, just fit the air springs inside your vehicle’s coil springs when they are deflated and malleable. We engineer all of our kits to be installed easily and each kit comes with a fully illustrated, easy-to-follow instruction manual.
Air Lift 1000 air springs can be inflated to the same pressure simultaneously through a single air line tube. Or, they can be inflated to different air pressures through dual air line tubes.
All Air Lift adjustable air springs are made with rugged, durable components and feature high burst strength. Our air spring kits are backed by a one year 20,000 km replacement warranty providing you have installed them correctly and used the correct operating pressure.
AOBAB900 series
Air assist springs fit inside your front or rear coil suspension or between leaf spring and chassis rail to provide suspension support when and where you need it. Simply add air to the air springs when hauling a heavy load to ensure that your vehicle is level and stable. Then, deflate when you are riding empty for better ride quality.
AOBAB900 series
Some air kits are supplied with 2 new springs to replace the original ones.
AOBAB900 series
Show is the two supplied Schroeder valves for inflating and deflating you air assist bags.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
