TJM XGS adjustable panhard rod to suit the rear of Nissan Patrol GU (excludes Series 3) raised vehicles. When raising some coil spring 4WD vehicles, the fixed length of the original front or rear panhard rod can cause the axle to shift. This creates an undesirable affect, allowing the axle to move forward and backwards, or from side to side. TJM XGS adjustable panhard rods are designed to eliminate this problem. Once installed, you can set the rod to the most appropriate position to accommodate the suspension style and lift height on your vehicle.    Package Weight: 6.00 kg   Compatible Vehicles  NISSAN PATROL GQ Coil 01/88-10/97 SWB/LWB Wagon  NISSAN PATROL GQ Coil 04/92-03/99 Cab Chassis  NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon  NISSAN PATROL GU S1-S3 Coil 04/99-09/07 C/Chassis  NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis

TJM XGS adjustable drag link for steering arm adjustment correction.   Package Weight: 5.50 kg   Compatible Vehicles  NISSAN PATROL GQ Coil 01/88-10/97 SWB/LWB Wagon  NISSAN PATROL GQ Coil 04/92-03/99 Cab Chassis

TJM XGS adjustable drag link for steering arm adjustment correction.   Package Weight: 5.00 kg   Compatible Vehicles  NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon  NISSAN PATROL GU S1-S3 Leaf 04/99-09/07 C/Chassis  NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon  NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis

Winch mounting bracket kit for fitment of winches to TJM Explorer & Frontier bull bars on Nissan Patrol Y62 vehicles without forward facing Radar. FEATURES: Suits: Nissan Patrol Y62 TI-L models without OE forward facing radar when fitting MODSB17N13X bullbar Package Weight: 1.00 kg   Compatible Vehicles  NISSAN PATROL Y62 S1-S4 02/13-10/19

Sturdy steel bolt-on winch mount kit to suit TJM bull bars that is designed to spread the winch load evenly across the chassis. Suits up to 9500lb/4300kg rated winches. Compatible Vehicles  NISSAN PATROL GQ Coil 01/88-10/97 SWB/LWB Wagon  NISSAN PATROL GQ Coil 04/92-03/99 Cab Chassis  NISSAN PATROL GQ Leaf 04/92-03/99 Cab Chassis

Plug and play wiring loom to suit the ancillary lights fitted to a TJM bullbar.   Suits: Nissan Patrol Y62 S1-S4 02/13-10/19 Package Weight: 0.43 kg   Compatible Vehicles  NISSAN PATROL Y62 S1-S4 02/13-10/19  NISSAN PATROL Y62 S5 11/19-12/21 TI Wagon  NISSAN PATROL Y62 S5 11/19-On TI-L Wagon  NISSAN PATROL Y62 S5 12/21-On TI Wagon

Genuine TJM Side Bars are designed to give your Patrol total protection in the un-likely event of side impact whilst off roading. Designed to fit with TJM bull bars and integrate with TJM Side Steps as an option, you are sure to experience un-rivalled protection. Using TJM's solid steel side bar clamping system combined with a TJM Bull Bar you have completed your full off road protection kit to tackle any off road track and more. Our Side Bars are engineered to prevent air bag deployment for low level collisions, thanks to an integrated crumple zone for piece of mind and safety.  FEATURES: Material: Black powdercoat steel Size: 50mm tube ADR: ADR Airbag Compliant Tech: Only fits with modular side steps (735SBSSA13W)   Compatible Vehicles  NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon  NISSAN PATROL GU S1-S3 Coil 04/99-09/07 C/Chassis  NISSAN PATROL GU S1-S3 Leaf 04/99-09/07 C/Chassis  NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon  NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis  NISSAN PATROL GU S4-On Leaf 10/07-12/16 C/Chassis  

TJM's modular range of side protection steps offer easy access and lower side protection for your Nissan. When combined with side bars your Patrol will have excellent wheel arch, flare, sill and panel protection. Designed to work in conjunction with the frontal protection systems of a bull bar and prevents air bag deployment for softer collisions. Our modular design gives you the option to install side steps first, then add side bars later.   FEATURES: Material: Black powdercoat Steel with alloy checker plate step tread Size: Chassis mounted 50mm tube ADR: Side Airbag Compliant Suits: Wagon and Coil Cab models Tech: Optional side bars available (780SBKIT13W) Package Weight: 44.60 kg   Compatible Vehicles  NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon  NISSAN PATROL GU S1-S3 Coil 04/99-09/07 C/Chassis  NISSAN PATROL GU S1-S3 Leaf 04/99-09/07 C/Chassis  NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon  NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis  NISSAN PATROL GU S4-On Leaf 10/07-12/16 C/Chassis

The genuine TJM Outback bull bar range offers exceptional frontal protection for your Nissan. Our engineers have spent countless hours perfecting the design of these bars to ensure our customers are equipped with one of the finest products in the market. Full wrap cato straps and 50mm outer pipework provides added strength, damage deflection and headlight protection. This TJM Outback bull bar is 4x4 equipped with a steel winch-mount, LED combination lights, and reinforced T-slot recovery jack points. Option up to add TJM LED Fog Lights for those foggy mornings. It's ready to work for you with dual aerial mounts and mounting points for installing driving lights. Combining classic styling with premium features, TJM's Outback bull bar range offers uncompromised frontal protection for your 4x4. Take the lead with TJM.   FEATURES: Material: Black Powdercoat Steel Size: 50mm Outer Tube ADR: Airbag Compliant. Does not void vehicle manufacturers warranty Suits: All models Winch: Integrated mount rated to 12000lb/5440kg Recovery: Strengthened Hi Lift Jacking Points Fog: Optional Fog Lights 425TJMLEDFG. If harness required for Fog operation (033WHSPOTFOGSAA) Indicators: Indicator Park Lights Lights: Suits all TJM Seeker and TJM Ultima driving lights up to 230mm Aerial: Dual Aerial Tabs Package Weight: 71.00 kg   Compatible Vehicles  NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon  NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis  NISSAN PATROL GU S4-On Leaf 10/07-12/16 C/Chassis

Optional top channel Hoop for your TJM Frontier bumper channel. Sleek polished 76mm alloy hoop to protect your vehicles driving lights and grille complete with a pair of stylised bumperettes proving an aesthetic finish.   76mm Polished Alloy Supplied Bumperettes Package Weight: 4.50 kg   Compatible Vehicles  NISSAN PATROL Y62 S1-S4 02/13-10/19

Mounting bracket kit to relocate the original equipment forward facing radar kit to TJM bull bar. This kit is for vehicles fitted with 2 front parking sensors and ICC Factory Radar. This kit plugs the centre parking sensor holes and fastens the ICC radar & allows fitment of headlight washers.  FEATURES: Suits: Nissan Patrol Y62 TI-L models with OE forward facing radar when fitting 070SB13N13X bullbar   Compatible Vehicles  NISSAN PATROL Y62 S1-S4 02/13-10/19

If you're looking for a minimalist yet tough bull bar with legendary TJM protection, our genuine Frontier bull bar is a great choice for your Patrol. You have the option of adding stylish bumperettes and or a sleek polished alloy 76mm centre tube to protect your vehicle's drive lights and grille. This TJM Frontier bull bar is 4x4 equipped with a steel winch-mount, LED fog lights, LED combination lights, and reinforced T-slot recovery jack points. It's ready to work for you with mounting points for installing large driving lights and optional aerials. A tough central frame is integral to our strength, and mounts to your vehicle's chassis for ultra-strong frontal protection. For a smart looking bull bar, this space saver may just be your final frontier.  FEATURES: Options: 76mm Polished Alloy Centre Tube and Energy Absorbing Bumperettes Material: Black Powdercoat Steel ADR: Airbag Compliant. Does not void vehicle manufacturers warranty Tech: Suits Anti Collision Radar, OE Park Sensors (except Series 4 models) Winch: Integrated mount rated to 9500lb/4300kg Recovery: Strengthened Hi Lift Jacking Points Fog: LED Fog Lights Indicators: LED Indicator Park Lights Lights: Recessed Light Mount (Width 75mm x 60mm) in top channel, suits single bolt lights only or LED Light Bar please check Light base fits bar recess Package Weight: 71.00 kg   Compatible Vehicles  NISSAN PATROL Y62 S1-S4 02/13-10/19

TJM's genuine T15 bull bar blends style and features at a great price for your Nissan. The TJM Tradesman bull bar is 4x4 equipped with indicator lights, and has provision for winch mounting with an optional winch mount. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. A stylish 63.5mm centre tube and 50mm outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.    FEATURES: Material: Black Powdercoat Steel Size: 63.5mm Centre Tube 50mm Outer Tube ADR: Airbag Compliant. Does not void vehicle manufacturers warranty Winch: Optional winch mount frame rated to 9500lb/4300kg (957MTB1312R) Indicators: Indicator Lights only Lights: Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light ranges Aerial: Dual Aerial Tabs Package Weight: 52.00 kg   Compatible Vehicles  NISSAN PATROL GQ Coil 01/88-10/97 SWB/LWB Wagon  NISSAN PATROL GQ Coil 04/92-03/99 Cab Chassis  NISSAN PATROL GQ Leaf 04/92-03/99 Cab Chassis

TJM's genuine T15 bull bar blends style and features at a great price for your Nissan. The TJM Tradesman bull bar is 4x4 equipped with indicator lights. Add an optional winch mount to mount your winch. It's ready to work for you with mounting points for installing large driving lights. A stylish 63.5mm centre tube and 50mm outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.   FEATURES: Material: Black Powdercoat Steel Size: 63.5mm Centre Tube 50mm Outer Tube ADR: Airbag Compliant. Does not void vehicle manufacturers warranty Winch: Optional winch mount frame rated to 9500lb/4300kg (957MTT1513J) Indicators: Recessed combination indicator park lights Lights: Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light ranges Aerial: Single Aerial Tab NB: Does not suit Series 3 10/2001-10-2004 Package Weight: 58.00 kg   Compatible Vehicles  NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon  NISSAN PATROL GU S1-S3 Coil 04/99-09/07 C/Chassis  NISSAN PATROL GU S1-S3 Leaf 04/99-09/07 C/Chassis

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRNP009 - Nissan Patrol Load Bar Kit / Gutter Mount - by Front Runner Consisting of: 2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner 1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 7kg (16lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 120mm (5") Length 1455mm (57") Height 170mm (7") Shipping Weight: Weight 8.2kg (18.1lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y60 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This rack kit is not suitable for under rack table fitment. Features KRNP010L - Nissan Patrol Y60 Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 4x LASS102 - No 2 Leg 130mm (Pair) 1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L) 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 41.76kg (92.06lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 40.72kg (90lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y60 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNPT10L - Nissan Patrol Y60 Slimline II Roof Rack Kit Tall Consisting of: 4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner 1 x RRSTJ11 - Slimline II Tray - 1425mm(W) X 2166mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 35kg (77lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 41.0kg (90.1lbs)

This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the Nissan Patrol Y61. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP012T - Nissan Patrol Y61 3 Door (1998-2010) Slimline II R Consisting of: 4x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG09 - SLII Tray - 1345mm(W)X1762mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 34.46kg (75.97lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18"); Length: 1730mm (68"); Height: 270mm (11")   Shipping Weight: Weight: 36kg (79lbs)

This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 Single Cab contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the Nissan Patrol Y61 Single Cab. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP013T - Nissan Patrol Y61 Single Cab Slimline II Roof Rack Consisting of: 1x LASD102 - No 2 Leg Diagonal 130mm (Pair)1x LASS101 - No 1 Leg 120mm (Pair1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 18.59kg (40.98lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18"); Length: 1720mm (68"); Height: 160mm (6")   Shipping Weight: Weight: 22kg (48lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP004L - Nissan Patrol Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x No 1 Leg 120mm (Pair) - by Front Runner 1 x No 2 Leg 130mm (Pair) - by Front Runner 1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 34kg (74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 39.2kg (86.2lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNPT06L - Nissan Patrol Y61 Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 2x LASS027 - Leg Spacer 6mm (Pair)4x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG11 - SLII Tray - 1345mm(W)X2166mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 39.17kg (86.35lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 40.03kg (88lbs)

This 2166mm/85.3 long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Patrol/Armada Y62. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP011T - Nissan Patrol/Armada Y62 (2010-Current)SlimlineIIRoof Rack Kit - by Front Runner Consisting of: 1 x FANP001 - Nissan Patrol/Armada Y62 (2010-Current) Foot Rails - by Front Runner 1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 39kg (86lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1615mm (64") Height 240mm (9") Shipping Weight: Weight: 45.2kg (99.4lbs)

The Polyair Bellows Ultimate load assist kits are specifically designed to suit big American SUV’s and 4WD’s. With an internal bump stop to help absorb shock, even with zero air pressure, it provides a 3 stage ride comfort. When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim - Clearance issues All this can be mitigated by installing a set of Polyair Bellows Ultimate. The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Internal bump stop - Built with a superior 2-ply fabric reinforced rubber - Ultra high strength & corrosion proof Zytel ® Nylon end caps - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings. - Kits designed for standard height and raised applications - Bespoke design for each vehicle 2 year, unlimited km warranty. To Suit: Nissan Patrol

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Nissan - Patrol Y62 - 2013-on

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles. When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - suspension bottoming out - rough ride - excessive sway & body roll - unpredictable braking characteristics - poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-35psi - Tough moulded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Nissan - Patrol GQ + GU (Y60/Y61) 1988-on, LEAF SPRING

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles. When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - suspension bottoming out - rough ride - excessive sway & body roll - unpredictable braking characteristics - poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-35psi - Tough moulded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Nissan - Patrol 1980 - 1989, MQ

POLYAIR LOAD ASSIST AIR SPRING To Suit Nissan Patrol GQ - GU LWB/Coil Spring Cab Chassis with 2'' Raised Suspension Load assist air spring kits are the easy, affordable way to keep your vehicle level and your ride smooth regardless of load or road condition. A level, stable vehicle means better braking, steering, and headlight aim. Load assist air springs also reduce sway, “porpoising” and bottoming out while maximizing ride comfort. The kit includes two durable, easy to install air springs that provide a load leveling capacity up to 450 Kg. Designed to work together or interdependently, these two air springs support your vehicle’s rear suspension. By using load assist air bags you can guarantee a safe, smooth and level ride every time. Air Lift 1000 air springs fit inside your front or rear coil suspension or between leaf spring and chassis rail to provide suspension support when and where you need it. The Polyair kit does not replace the original coil spring but works with it, original springs tend to sag from wear or from overloading. Simply add air to the air springs when hauling a heavy load to ensure that your vehicle is level and stable. Then, deflate when you are driving with an empty load for better ride quality. For all 4WD, Work vans, Twin Cabs and Cars, the springs are fully adjustable from 5 to 35 PSI via air line tubing. The kit includes 2 air springs, quick-connecting user-friendly air fittings, brackets, air lines and all of the hardware you need. To install, just fit the air springs inside your vehicle’s coil springs when they are deflated and malleable. We engineer all of our kits to be installed easily and each kit comes with a fully illustrated, easy-to-follow instruction manual. Air Lift 1000 air springs can be inflated to the same pressure simultaneously through a single air line tube. Or, they can be inflated to different air pressures through dual air line tubes. All Air Lift adjustable air springs are made with rugged, durable components and feature high burst strength. Our air spring kits are backed by a one year 20,000 km replacement warranty providing you have installed them correctly and used the correct operating pressure. AOBAB900 series Air assist springs fit inside your front or rear coil suspension or between leaf spring and chassis rail to provide suspension support when and where you need it. Simply add air to the air springs when hauling a heavy load to ensure that your vehicle is level and stable. Then, deflate when you are riding empty for better ride quality. AOBAB900 series Some air kits are supplied with 2 new springs to replace the original ones. AOBAB900 series Show is the two supplied Schroeder valves for inflating and deflating you air assist bags.

The Polyair Bellows Ultimate load assist kits are specifically designed to suit big American SUV’s and 4WD’s. With an internal bump stop to help absorb shock, even with zero air pressure, it provides a 3 stage ride comfort. When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim - Clearance issues All this can be mitigated by installing a set of Polyair Bellows Ultimate. The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Internal bump stop - Built with a superior 2-ply fabric reinforced rubber - Ultra high strength & corrosion proof Zytel ® Nylon end caps - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings. - Kits designed for standard height and raised applications - Bespoke design for each vehicle 2 year, unlimited km warranty. To Suit: Nissan Patrol

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles. When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - suspension bottoming out - rough ride - excessive sway & body roll - unpredictable braking characteristics - poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-35psi - Tough moulded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Nissan - Patrol Y62 - 2013-on

The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles. When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim - Clearance issues All this can be mitigated by installing a set of Polyair Bellows. The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Built with a superior 2-ply fabric reinforced rubber - Ultra high strength & corrosion proof Zytel ® Nylon end caps - Most popular kits do not require drilling into the chassis - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings. - Kits designed for standard height and raised applications - Bespoke design for each vehicle 2 year, unlimited km warranty. Position: Rear Nissan - Patrol GQ + GU (Y60/Y61) 1988 - 02/1999 - on, LEAF SPRING

The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles. When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim - Clearance issues All this can be mitigated by installing a set of Polyair Bellows. The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Built with a superior 2-ply fabric reinforced rubber - Ultra high strength & corrosion proof Zytel ® Nylon end caps - Most popular kits do not require drilling into the chassis - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings. - Kits designed for standard height and raised applications - Bespoke design for each vehicle 2 year, unlimited km warranty. Position: Rear Nissan - Patrol GQ + GU (Y60/Y61) 1988 - 01/1999, LEAF SPRING

Genuine TJM auxiliary battery trays are built tough to withstand corrosion, heat and under-bonnet space limitations. Precision engineering ensures comfortable battery accommodation and secure under-bonnet mounting in the most appropriate location. Starting with 2mm thick sheet steel construction and fabricated with strategic folds and MIG welds gives TJM battery trays superior structural strength. A smooth black powdercoat finish offers long-lasting corrosion resistance. When only the best will do, insist on a TJM battery tray. Specifications FEATURES: Material: Constructed from 2mm thick steel with black powdercoat finish Design: Press folded and welded in strategic areas for maximum strength to stand the toughest conditions Suits: 305mm long battery Tech: Left middle engine bay fitment Models: 3.0TDI Turbo Diesel Intercooled for 4.2 Ltr Intercooled fitment see you local TJM Store Package Weight: 3.30 kg Compatible Vehicles NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis NISSAN PATROL GU S4-On Leaf 10/07-12/16 C/Chassis

TJM Airtec snorkels are well sealed and with the air intake well above water level, to enable water crossings and all round improved air flow for your engine. This snorkel kit suits Nissan Patrol GQ RD 2.8 L TD wagon vehicles. A must-have upgrade for any 4WD enthusiast, our snorkels allow deep water crossings and hassle-free air induction when immersed in dust. In addition to 4WD benefits, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compare to air at bonnet level. Our snorkels are designed and engineered in Australia for uncompromised performance. Specifications Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture Size: Australian made and Engineered to supply correct volume of air to engine Suits: 2.8TD Diesel models Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine Package Weight: 4.00 kg Compatible Vehicles NISSAN PATROL GQ Coil 01/88-10/97 SWB/LWB Wagon

Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. This snorkel kit suits Nissan Patrol GU Series 1 to 4 2.8L, 4.2L and 4.2L Turbo Diesel vehicles. A must-have upgrade for any 4WD enthusiast, our snorkels allow deep water crossings and hassle-free air induction when immersed in dust. In addition to 4WD benefits, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compare to air at bonnet level. Our snorkels are designed and engineered in Australia for uncompromised performance. Specifications Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture Size: Australian made and Engineered to supply correct volume of air to engine Suits: 2.8TD, 4.2D, 4.2TD Diesel models Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine Package Weight: 4.00 kg Compatible Vehicles NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon NISSAN PATROL GU S1-S3 Coil 04/99-09/07 C/Chassis NISSAN PATROL GU S1-S3 Leaf 04/99-09/07 C/Chassis NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon

TJM Airtec snorkels are well sealed and with the air intake well above water level, to enable water crossings and all round improved air flow for your engine. This snorkel kit suits Nissan Patrol GU 08/2001+ ZD30 3.0 L vehicles. Fitting a TJM Airtec snorkel means air supply is drawn from roof level providing cooler and cleaner air to the engine. This will help extend the life of the air cleaner element and reduce the wear of vital components. snorkels also assist with deep water crossings and provide hassle free air induction in dusty conditions. Specifications Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture Size: Australian made and Engineered to supply correct volume of air to engine Suits: 3.0L Diesel ZD30 models Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine Package Weight: 3.90 kg Compatible Vehicles NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon NISSAN PATROL GU S4-On Coil 10/07-12/16 C/Chassis NISSAN PATROL GU S4-On Leaf 10/07-12/16 C/Chassis

Give your vehicle a breath of fresh air with a TJM Airtec snorkel. This snorkel kit suits Nissan Patrol GU 4.5 and 4.8 L petrol vehicles. A clever in-take design separates rain and moisture from the air stream before it enters the engine. Did we mention that our snorkels look great too? Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. TJM snorkels are built tough for challenging Australian conditions. Read Less Pricing Specifications Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture Size: Australian made and Engineered to supply correct volume of air to engine Suits: 4.5L and 4.8L Petrol models Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine Package Weight: 4.00 kg Compatible Vehicles NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon NISSAN PATROL GU S4-On Coil 10/04-12/16 Wagon

TJM Airtec snorkels are precision-engineered to supply the correct volume of air to your engine. This snorkel kit is designed for Nissan Patrol Y62 Ser 5 11/2019+ petrol vehicles. Did we mention that our snorkels look great too? Unlike other manufacturers, TJM individually design and engineer our snorkels to complement the shape of your vehicle. TJM snorkels are built tough for challenging Australian conditions. Specifications Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture Size: Australian made and Engineered to supply correct volume of air to engine Suits: V8 Petrol models Package Weight: 3.95 kg Compatible Vehicles NISSAN PATROL Y62 S1-S4 02/13-10/19 NISSAN PATROL Y62 S5 11/19-12/21 TI Wagon NISSAN PATROL Y62 S5 11/19-On TI-L Wagon NISSAN PATROL Y62 S5 12/21-On TI Wagon

Sturdy steel bolt-on winch mount kit to suit TJM T15 Alloy bull bar that is designed to spread the winch load evenly across the chassis. Suits up to 9500lb/4300kg rated winches. (Not 4.8L Petrol model Patrol) Read Less Compatible Vehicles NISSAN PATROL GU S1-S3 Coil 12/97-09/04 Wagon NISSAN PATROL GU S1-S3 Coil 04/99-09/07 C/Chassis NISSAN PATROL GU S1-S3 Leaf 04/99-09/07 C/Chassis

MODULEMAP FOR Y62 NISSAN PATROL 5.6L SERIES 1 – 5: 2013 TO CURRENT Access the full potential of your Y62 Nissan Patrol with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway. Boost power and torque for an overall increase in performance Choose between three tunes instead of one permanent tune Return your vehicle to stock performance at any time Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest Keep your Patrol safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance. Cruise mode: ideal for everyday driving and towing heavy loads Sport mode: gives you maximum power and torque Standard Mode: a copy of the ECU, which returns your Y62 to stock performance

Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4x4 Storage Drawer System? MSA 4X4's Storage Drawer Systems are designed with a patented slide technology offering a smoother opening under heavy loads. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4's Storage Drawer Systems are constructed with aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented "Stay-Open Block" allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4's Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. Features: 100% Drawer extension for complete access Patented "Stay-Open Block" Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels Includes: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4's Lifetime Guarantee Parts Included: Left Drawer Module (1045 x 530 x 275) Left Wing & Fit Kit Single Width Trim Associate Parts: Drawer Divider Single Drawer Side Carpet Piece Drawer Stacking Kit Left Power Panel Left Explorer Pre-Cut Panel

One of the lightest drawer systems ever made, the ADR Crash Test Certified MSA 4X4 Explorer Aluminium Storage Drawer System boasts more storage space than most other systems with the same outside dimensions! Patented “Pro-Glide” technology smoothly handles up to 250kg per pair of drawers providing smooth opening under heavy loads as well as 100% drawer extension and access. The entire drawer comes out further than the frame! No hard to reach items in our drawers and no unpacking of contents to reach items at the back! Designed from the ground up to establish the way a quality 4WD system should be, the MSA 4X4 Explorer Aluminium Storage Drawer System delivers many more features than any other 4WD Drawer system in the market today!We've re-set the benchmark in quality 4WD Drawer Systems from a safety, functionality and quality perspective. Features include: 100% aluminium construction with anodised aluminium components means that our drawers are super strong, lightweight and have a lifetime corrosion resistance. This also means that our drawers are lighter than many generic steel drawers in the market – a very important feature as the GVM (Gross Vehicle Mass is the maximum weight that a vehicle can carry including its own weight) is crucial to the safe and efficient operation of a vehicle. The patented “stay-open block” in our Explorer Aluminium Storage Drawer System allows the drawer to remain in an open position, even on a 30-degree slope! This is another important safety feature which prevents a fully loaded, open drawer from unexpectedly slamming shut whilst still in use. This “stay-open block” also doubles as two electrical contacts, that when the drawer is open, create an electrical circuit without any moving wires to power the included LED strip light. The patented internal LED strip light delivers increased practicality, complete with manual override switch conveniently located in the drawer face. The patented “Pro-Glide” system of our MSA 4X4 Explorer Aluminium Storage Drawer System utilises the side of the drawers and the frame as the actual slide unit, which means that no usable storage space inside the drawers are lost to traditional side slide runners. The over extension using custom sealed bearings, removes the need for additional slide components, maximising storage space. More internal drawer space is achieved with equivalent external frame dimensions of other drawers. Flush finish internal drawer sides provide greater storage practicality without any internal folds to hinder how larger items are placed inside the drawers or removed from the drawers. Flush fitting removable wing kits in our Explorer Aluminium Storage Drawer Systems are designed to clip or bolt in, allowing access to storage areas beside the drawers! This is great for customers who want to store items such as their second battery or compressor in that available space. If a customer has a Fridge Drop Slide or other item hard mounted onto the wing kit, access under the drawer wings are also possible due to the unique removable front facing wing panels. Floor extensions are included as standard with Dual Cab Ute wing kits which are the wing pieces behind the drawers to create a full flat surface at the back of the tray, preventing items from falling behind the drawers. Our Explorer Aluminium Storage Drawer System's injection moulded design-registered lock system with purpose built injection-moulded frame & aluminium components help deliver a 100% safe and secure lock system that cannot be levered open from underneath (unlike other drawers), providing safe storage. An anodised knurled aluminium handle has been designed for comfort & practicality. A dust & water resistant designed seal around the front panel resists ingress, making our drawers the perfect storage solution for road trips through the red dust centre of Australia. Stainless steel fasteners are also used throughout where possible for a rust free and problem free life! Explorer Aluminium Storage Drawer Systems are available in 3 different lengths to suit popular wagons and dual cab utes. The 930 drawer system is 945mm long (overall complete drawer length including handle lock) and suits vehicles such as the Ford Everest, Toyota Fortuner, 150 Series Prado, 120 Series Prado and 76 Series Wagons. The 1030 drawer system is 1045mm long (overall complete drawer length including handle lock) and suits vehicles such as the 200 Series & 100 Series Land Cruisers. The 1350 drawer system is 1365mm long (overall complete drawer length including handle lock) and suits most dual cab utes! We recommend that any tub liners are removed before installing our drawer system as the tub liners do not follow the contours of the tub precisely enough and won’t result in an ideal fit. Whilst every detail has been taken into account and engineered specifically to deliver the best and most reliable 4WD Storage Drawer System available in the market, MSA 4X4’s Lifetime Guarantee ensures that all Explorer Aluminium Storage Drawer System customers have the peace of mind that if anything were to go wrong, that they’d be looked after. 1030 Complete Double Drawer System to suit Nissan Patrol GU ST Y61 (Series 4-10) 10/04-2016 Complete Kit includes: Left & Right 1030 Drawer Modules Left & Right Wing & Fit Kits Double Drawer Join Kit Double Trim

NISSAN PATROL Y62 - TOWING MIRRORS (BLACK HEATED ELECTRIC INDICATORS) 2013-CURRENT Year: 2013-CURRENT Model: NISSAN PATROL / Black / Heated / Electric / Indicators FEATURES: Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving Slightly curved glass for even more vision, but not too curved that its distracting Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension Designed for towing caravans, camper trailers, trailers, boats and horse floats Available to suit a growing range of tray backs and towing vehicles Included: 1 x Left hand side mirror 1 x Right hand side mirror 1 x Installation instructions Prices include GST, exclude freight. SPECIFICATIONS: Weight: 14 kg Freight Dimensions: 54 × 53 × 31 cm

NISSAN PATROL Y62 - TOWING MIRRORS (CHROME HEATED ELECTRIC INDICATORS) 2013-CURRENT Year: 2013-CURRENT Model: NISSAN PATROL Y62 / Chrome / Heated / Electric / Indicators FEATURES: Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving Slightly curved glass for even more vision, but not too curved that its distracting Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension Designed for towing caravans, camper trailers, trailers, boats and horse floats Available to suit a growing range of tray backs and towing vehicles Included: 1 x Left hand side mirror 1 x Right hand side mirror 1 x Installation instructions Prices include GST, exclude freight. SPECIFICATIONS: Weight: 14 kg Freight Dimensions: 54 × 53 × 31 cm

Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: Front

Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: 2nd Row

Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: 2nd Row

Weight: 6 kg Freight Dimensions: 36 × 26 × 38 cm Position: Complete

Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: 2nd Row

Weight: 6 kg Freight Dimensions: 36 × 26 × 38 cm Position: Complete

Weight: 6 kg Freight Dimensions: 36 × 26 × 38 cm Position: Complete