FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack 40In...
$234.90
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Light Bar Wind Fairing for the Ford F-150 Super Crew (2015-2020) Slimsport Roof Rack Kit / Lightbar ready
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Works with or without a sunroof
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack Wind...
$234.90
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford F150 Super Crew (2015-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Works with or without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack 40In...
$234.90
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Lightbar wind fairing for the Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack Wind...
$234.90
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Works with or without a sunroof.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Wind Fairing For Rack / 1255Mm (W) -...
$234.00
$260.00
This Wind Fairing will reduce drag and wind noise while pushing airflow up and over your rack's cargo. It's easy to secure the Wind Fairing to your rack in just three simple steps.
Note: May interfere with sunroof operation on some vehicles.
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
1 x Protective Vinyl Strip
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1180mm (46.5") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.9kg (4.2lbs)
ALPINE S2-Series 6.5" Component Speakers - S2-S65C
$233.96
$259.95
It's time for high-res
We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wonderous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound.
Innovative materials
Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement.
A 1" separate silk dome tweeter serves up all the high-frequency detail you've been missing with factory sound. Because tweeters can be challenging to install, Alpine provides in-line crossover systems and a threaded removable housing to make sure you have what you need to make them sound their best.
Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations.
Product highlights:
2-way component speaker system
6-1/2" glass-fiber woofer cone with High-Amplitude Multi-Roll surround
1" silk dome tweeter with threaded removable housing
handles up to 80 watts RMS (240 watts peak power)
frequency range: 70-40,000 Hz
warranty: 1 year
MFR # S2-S65C
Item # 500S2S65C
What's in the box:
2 Woofers
2 Woofer mount adapter brackets
2 Tweeters (each has a 29" length of wire attached)
2 Flush mount housings (with tweeters installed)
2 Tweeter grilles (fixed)
Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
Eight M4x6.5mm Machine screws with split lock washers attached
Eight M4 Nuts
6 Flat washers
8 Speed clips
Warranty information
On-line product registration information
Important Notice sheet
Declaration of conformity
Template and specs on box
FRONT RUNNER Kayak Carrier / Foldable J Style - RRAC256
$233.10
$259.00
Designed to carry a variety of hull shapes as well as SUPs.
This is a J style Kayak foldable bracket.
The cushioned padded bars protect the hull.
Large contact surface area for extra stability when transporting your kayaks.
Includes 2 x Tie Down Straps with protective buckle bumpers.
Installation hardware supplied.
Features
Consists of:
2 x Foldable Kayak Carrier Brackets
2 x Tie Down Straps
Installation Hardware
Fitting Instructions
Open Dimensions
795mm (31.3") L x 426mm (16.8") W x 462mm (18.1") H
Closed Dimensions
472mm (18.6") L x 270mm (10.6") W x 102mm (4") H
Weight
5.17kg (11.4lbs)
FRONT RUNNER Wind Fairing For Rack / 1165Mm/1255Mm(W) - RRAC143
$233.10
$259.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: This Wind Fairing is not suitable for the Toyota Rav4 Adventure Models
Note: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.1kg (2.4lbs)
FRONT RUNNER 105A Battery Box- - BBRA001
$229.50
$255.00
This box allows you to mount an additional battery for your vehicle onto any flat surface, held safe and secure, away from damage.
Product Dimensions:392mm (15.4") L x 183mm (7.2") W x 252mm (9.9") H
Internal Dimensions:340mm (13.4") L x 180mm (7.1") W x 210mm (8.3") H
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Rear Window Molle...
$227.70
$253.00
This Jinmy 4 Gen Molle Panel creates much-needed storage space or storage configuration options.
Installation to vehicles without a curtain airbag (South Africa):
Mounts to the rear grab handle and the factory mounting points under the left or right rear window. No drilling is required.
Installation to vehicles with a curtain airbag (EU and AU):
Drilling is required above the rear window and secures to the factory mounting points under the left or right rear window.
Strap your additional supplies and adventure gear to the Molle Panel using the supplied straps, two (2) long and two (2) short adjustable webbing straps included.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
The Molle Panel is compatible with the Suzuki Jimny Internal Storage Shelf to maximize the load solutions.
Features
Consists of:
1 x Molle Panel
2 x Mounting Brackets
2 x Short Molle Panel Straps
2 x Long Molle Panel Straps
Installation Instructions
Fitting Instructions
Materials Used:
Black powder coated high strength steel
Product Dimensions:
Molle Panel Dimensions:
630mm (24.8") W x 3mm (0.1") D x 450mm (17.7") H
Product Dimensions w/Grab Handle Bracket:
556mm (21.9") H x 630mm (24.8") W x 65mm (") D
Product Dimensions w/Drill Mount Bracket:
458 (19.1") H x 630mm (24.8") W x 50mm (2") D
Weight:
3.7 kg (8.2lbs)
LIGHTFORCE Striker Professional Edition Led Driving Light (Single Light )...
$227.70
$253.00
With a stylish rectangular form factor for a cool look on any 4X4, SUV or ute, and great all-round performance, Striker LEDs are the latest Driving Lights from the leader in performance lighting.
Australian made Striker LEDs are designed to perform to our consistently high standards. Their IP68 and IP69k ingress protection rating means they can handle a creek crossing and a high-pressure washdown after an adventure. With reduced radio interference technology included, you can listen to the radio without static. And a range of modular filters lets you modify the lights to suit your driving conditions.
Made in Australia
15 x high-quality LumiLED LEDs providing consistent high performance
LED spot reflectors with the ability to use modular filters to produce a wide driving light beam pattern or flood diffusion filter for work light environment
IP68 and IP69K resistant to water and dust ingress
77mm slim footprint for multiple mounting options
Reverse polarity voltage protection and high current waterproof connectors
PCB designed with reduced electromagnetic interference
CE certified
Thermal overload protection protects the light from overheating
Hard-wearing UV stable powder-coat finish
High-pressure diecast aluminium housing and bezel providing strength and weight reduction
Impact-resistant polycarbonate filter for added protection
Genuine Gore® waterproof membrane with mechanical seal
3 year warranty
Specifications
Distance: 1 lux at: 533m
Distance: 0.25 lux at: 1066m
Effective Lumens: 3466 (Individual)
Raw Lumens: 5625 (Individual)
Colour Temperature: 5000K
CRI: 70
Current Draw: 4.4Amps @ 13.2V
Voltage Range: 10V - 36V DC
Wattage: 60W
Ingress Protection Rating: IP68, IP69K
Weight: 1Kg (Including Mounts)
What's Included
Single light contains one light,cover, and mounting hardware, no wiring harness (available separately).
1 x Striker Professional Edition LED Driving Lights (STRIKERLEDPK)
1 x Clear filters with Lightforce logo
1 x Reversible mounting hardware
1 x User instructions
Compatibility
Universal
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Rack 40 Light Bar...
$226.80
$252.00
Improve aerodynamics and enjoy a quieter ride on your loaded Toyota Sequoia with the specially-designed Slimsport Rack Wind Fairing. This innovative accessory reduces drag and minimizes wind noise by efficiently channeling air over your Slimsport Roof Rack. This particular model features a 40" cutout to allow the use of the Front Runner 40" Light Bar, so you can keep exploring even after the sun goes down.
Lightbar wind fairing for the Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Sequoia 40" light bar wind fairingFitment Guide Installation Hardware
Materials used:Black powder-coated high strength steel
Product Dimensions:1281mm (50.4") L x 169mm (6.7") W x 172mm (6.8") H
Weight:4kg (8.8lbs)
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Rack Wind Fairing -...
$226.80
$252.00
Enhance the aerodynamics of your Toyota Sequoia and experience a smoother, quieter ride when you’re hauling loads with the purpose-built Slimsport Rack Wind Fairing. This innovative accessory is designed to minimize drag and reduce wind noise by effectively directing airflow over your Slimsport Roof Rack (and the gear loaded on it).
A wind fairing for the Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Sequoia (2023-Current) Slimsport Rack Wind Fairing1 x Fitting InstructionsInstallation Hardware
Materials used:Black powder coated high strength steelStainless steel fasteners
Product Dimensions:1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:4.2kg (9.3lbs)
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing -...
$226.80
$252.00
Reduce the drag and wind noise over the roof rack of your Toyota Rav4 with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Rav4 Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 172mm (6.8") W x 203mm (8") H
Weight:3.25kg (7.2lbs)
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack 40 Light Bar...
$226.80
$252.00
The Slimsport Rack Wind Fairing is specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Light Bar Wind Fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
Durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Consists of:1 x Toyota Rav4 Slimsport Rack 40" Light Bar Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 178mm (7") W x 161mm (6.3") H
Weight:4.94kg (10.9lbs)
FRONT RUNNER Toyota Tundra Crew Cab (2022-Current) Slimsport Rack Wind...
$225.90
$251.00
A wind fairing for the Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab Slimsport Rack Wind Fairing
1 x Fitment Guide
1 x Installation Hardware
Materials used:
Black powder coated steel
Product Dimensions:
1460mm (57.5") L x 250mm (9.8") W x 50mm (2") H
Weight:
4.7kg (10.3lbs)
FRONT RUNNER Toyota Tundra (2022-Current) Slimsport Rack 40In Light Bar...
$225.90
$251.00
Lightbar wind fairing for Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab (2022-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:
4.2kg (9.3lbs)
ALPINE S2-Series 8" Dual Voice Coil Subwoofer - S2-W8D4
$224.96
$249.95
ALPINE S2-SERIES 8" DUAL VOICE COIL SUBWOOFER-S2-W8D4
Enhance your sound system’s performance with the remarkable S-Series S2-W8D4 8″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 8-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W8D4 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W8D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W8D4 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W8D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W8D4 8″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W8D4 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 300W RMS / 900W Peak
Nominal Impedance: 4Ω
Frequency Response: 23Hz – 215Hz
Sensitivity (1W/1M): 82.7dB
Voice Coil: 35.56mm
X-Max (1-Way): 13mm
Magnet Weight: 0.963kg
ALPINE S2-Series 8" Dual Voice Coil Subwoofer - S2-W8D2
$224.96
$249.95
ALPINE S2-SERIES 8" DUAL VOICE COIL SUBWOOFER-S2-W8D2
Enhance your sound system’s performance with the remarkable S-Series S2-W8D2 8″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 8-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W8D2 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W8D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W8D2 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W8D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W8D2 8″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W8D2 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 300W RMS / 900W Peak
Nominal Impedance: 2Ω
Frequency Response: 23Hz – 215Hz
Sensitivity (1W/1M): 82.6dB
Voice Coil: 35.56mm
X-Max (1-Way): 13mm
Magnet Weight: 0.963kg
FRONT RUNNER Wolf Pack Pro Storage Boxes – Quad Set...
$224.10
$249.00
Front Runner Wolf Pack Pro Storage Box – Quad Set (4 Pack)
Maximise your storage with durable, stackable organisation. The Front Runner Wolf Pack Pro Quad Set includes four heavy-duty storage boxes designed to keep your gear secure, organised, and protected in any environment.
Built from impact-resistant plastic and featuring upgraded secure latches, these storage boxes are ideal for 4WD touring, camping, trade use, and everyday storage.
Key Benefits
Set of 4 stackable storage boxes for maximum value
Impact-resistant construction for long-lasting durability
Secure latching system keeps contents protected
Space-efficient design with vertical sides to reduce wasted space
Stackable lids for stable and secure storage
Suitable for vehicle, garage, and outdoor use
Product Overview
The Wolf Pack Pro is designed for efficient storage and transport of gear across a wide range of applications. Whether mounted in a cargo area, stored on a roof rack, or used in a workshop, these boxes provide reliable organisation without compromising space.
The improved latch system ensures a tight seal, helping protect your equipment from dust, dirt, and harsh conditions.
Built for Practical Use
Integrated handles for easy carrying and handling
Stackable design for compact storage in vehicles or storage areas
Ideal for camping gear, tools, recovery equipment, and more
Suitable for exterior use including roof rack setups
System Compatibility
Compatible with Front Runner Transit Bags (holds 2–3 units depending on size)
Works with Front Runner drawer systems for organised vehicle storage
Can be used with rack mounting brackets, Stratchits, and tie-down systems
Compatible with foam dividers or flat packs for fragile items
Important Notes
Wolf Pack Pro boxes are not stackable with standard Wolf Pack models
Due to the sealed design, lids may require slight pressure to open
What’s Included
4 x Front Runner Wolf Pack Pro Storage Boxes
Specifications (Per Unit)
Material: Black polypropylene plastic
External Dimensions: 51 cm (L) x 40 cm (W) x 23 cm (H)
Internal Dimensions: 44.5 cm (L) x 33.5 cm (W) x 20.3 cm (H)
Weight: 3.65 kg per box
Why Choose Wolf Pack Pro
Durable storage solution built for tough conditions
Flexible use across vehicles, workshops, and outdoor setups
Trusted system used in premium 4WD storage solutions
Efficient design to maximise usable storage space
FAQs
Are these waterproof?They feature a secure seal to help protect against dust and dirt, but are not fully waterproof.
Can these be used on a roof rack?Yes, they are suitable for roof rack storage when properly secured.
Can I stack them?Yes, they are designed to stack securely using the lid and base design.
Are they compatible with standard Wolf Pack boxes?No, Wolf Pack Pro boxes are not stackable with standard Wolf Pack models.
Upgrade Your Storage Setup
Organise your gear with a durable, stackable storage solution built for real-world use. The Wolf Pack Pro Quad Set delivers reliability, flexibility, and value for any setup.
FRONT RUNNER Toyota Hilux Vigo Double Cab (2005-Current) Rear Seat...
$224.10
$249.00
Keep your passports, cash, valuable travel documents, and mobile devices out of sight and locked tight in this under the seat all steel vehicle safe.
All vehicle based adventures require you to carry valuables. Don’t leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft.
The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor, yet is still easily accessible.
Manufactured with black powder coated 2mm thick steel.
Designed and built in South Africa - a country where crime deterrence is an art form.Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Consists of:1 x Safe1 x Cam Lock incl. 2 keysInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:260mm (1.02") L x 500mm (19.7") W x 70mm (2.8") H (incl. lock)Opening Dimensions:156mm (6.1") L x 334mm (13.2") WWeight:2.44kg (5.4lbs)
MSA 4X4 Right Power Panel (Passenger Side) - EPP-LEFT
$223.20
$248.00
MSA 4x4 Left Power Panel (Passenger Side)- EPP-LEFT
These pre-wired, 3-Way Power Panels are designed to replace the Wing Face Plates and attach them to the Wing Kit Brackets on the sides of an MSA 4X4 Storage Drawer System. Creating a perfectly flush finish and include:
3 x labelled, illuminated Rocker switches (Water Pump, Compressor and Aux Light) and 2 spare switch covers (1 x Fridge and 1 x Inverter)
2 Port 4.2A (combined) USB charging outlets
2 x cigarette lighter sockets
Illuminated auxiliary battery voltage display
Angled sockets to suit being installed on the front of a set of drawers, so that accessory plugs in use, do not hit the vehicle tailgate or wagon doors
Pre-wired for faster installation
Unique injection-moulded backing plate which protects the back of the switches and wiring from loose items stored under the Storage Drawer Wings
FRONT RUNNER Suzuki Jimny (2018-Current) Ladder - LASJ004
$222.30
$247.00
Everybody wants to get the much-liked shot of someone standing on the roof or rack when in a fantastic setting, but how do you get up there? With Front Runner's 4-step ladder, of course. It has rubber grips on both the top and bottom steps and has been powder-coated black for an attractive finish. Accessing your camping or adventure gear on your rack has never been easier.
This ladder bolts to the rear swing door and existing points of a Suzuki Jimny (2018-Current).
Suitable for the 3 door and 5 door models.
The ladder has 4 steps.
Rubbers grips on the top and bottom steps.
Length from bottom step to top step is 950mm / 37.4".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Suzuki Jimny Ladder
Installation Hardware
Fitment Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
490mm (19.3") L x 135mm (5.3") W x 950mm (37.4") H
Weight:
3.15kg (6.9lbs)
Load Rating:
110kg (242.5lbs)
FRONT RUNNER Quick Release 270˚ Awning Bracket - RRAC323
$220.50
$245.00
If you need to quickly fit or remove the 270˚ Awning from your Front Runner rack, these Quick Release 270˚ Awning Brackets are the best way. Once installed on a rack, you need nothing else to fit or remove the awning. Just release or secure the latches, and you can fit or remove the awning in seconds
A set of Quick Release brackets to secure your 270˚ Awning.
Two (2) base brackets are bolted to the side profile of your Slimline II rack, while the self-aligning bushes are secured to the awning base.
Once these brackets are installed on a Front Runner Rack, no additional tools are needed to remove or refit the awning.
Simply release the 2 latches and lift the awning off in seconds.
No more wrenching in tight spaces during the “off-season” or time-consuming weekday removals of the awning.
The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted, Leaving vast rack space available.
No awning modification required.
Supplied with all required mounting hardware.
Fitting instructions are included.
Weight limit: 30kg (66 lbs).
Note: Always ensure your 270˚ awning is secured down via guy ropes in case of any gusts of wind.
Consists of:2 x Latch Plates2 x Base BracketsHardware KitFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:137mm (5.3") L x 140mm (5.5") W x 188mm (7.4") H (per Bracket)
Weight:1Kg (2.2lbs)
Load Rating: 30Kg (66lbs)
MSA 4X4 Battery Box Slimline - 40019
$220.50
$245.00
MSA 4x4 Battery Box Slimline- 40019
The MSA 4X4 Battery Box is a safe, secure and versatile solution for adding an auxiliary power supply to a vehicle.
The neat and compact design makes a perfect addition to an MSA 4X4 Storage Drawer System. It can be positioned out of sight under side wing kits yet still easily accessible or fitted universally inside a trade canopy. Available in two sizes, Large to fit standard N70, AGM or Lithium batteries and Slimline for smaller Lithium batteries.
The mounting Plate is designed to attach to the drawers with Backing Plates for adjustable positioning of the Battery Box, gaining support from the drawer and alleviating the need to drill through the floor of the tray.
An insulated Lid prevents any issues that could arise from exposed Battery terminals. Both ends of the Battery Box have Protective foam insert panels, with entry and exit points for wiring to the battery.
Adjustable Plastic dipped Securing Saddles bolt down from the top to hold the battery in place. A secure mounting plate is supplied and can be installed at either end. Perfect for mounting a Compressor, BC/DC charger or Fuse box.
FEATURES:
2mm powder-coated steel construction
Height Adjustable mounting Plate
Protective foam insert panels,
2x Battery Securing Saddles offering a solid and secure fit
Insulated Rubber Lid
Compressor, BC/DC charger, or fuse box Mounting plate
INCLUDES:
MSA 4X4’s Lifetime Guarantee
FRONT RUNNER Narrow Wind Faring For Rack / 1165Mm/1255Mm(W) -...
$219.60
$244.00
To reduce roof rack wind noise and aid the efficient air movement over your rack.. The quick-to-fit Narrow Wind Fairing for Rack will do just that and fits the 1165mm and 1255mm wide trays.
A wind fairing for the narrow 1165mm and 1255mm trays.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. A protective vinyl strip is included to protect vehicle paint.
Brackets and installation hardware included.
Features
Consists of:
1 x Low Profile Wind Fairing
1 x Protection Strip
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
87mm (3.4") L x 950mm (37.4") W x 200mm (7.9") H
Weight:
1.53kg (3.4lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack 40In...
$217.80
$242.00
Improve the performance of the Slimsport Rack on your Ram 1500 with this useful Light Bar Ready Wind Fairing. It accommodates a Slim 40" LED Light Bar while massively reducing wind noise and fuel consumption allowing easy airflow over the rack and accessories. It's a great way to quieten your ride.
Lightbar wind fairing for RAM 1500 Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1370mm (53.9") L x 200mm (7.9") W x 177mm (7") H
Weight:
4kg (8.8lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack Wind...
$217.80
$242.00
Enhance the performance of the Slimsport Roof Rack on your Ram 1500 with this smart Rack Wind Fairing. It will massively reduce wind noise and fuel consumption while allowing easy airflow over your rack and accessories-a great way to quieten your ride.
A wind fairing for the RAM 1500 Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack Wind Fairing
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1371mm (54") L x 222mm (8.7") W x x 210mm (8.3") H
Weight:
4.4kg (9.7lbs)
POLYAIR Bellows Air Bag Cradle Kit. - ABC102
$217.80
$242.00
This airbag cradle kit is specifically designed to allow your 75-79 series to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveller.
Do you need maximum wheel travel with no down travel restrictions? then this is the Airbag kit for you
Compatibility
HOLDEN
ISUZU
MAZDA
TOYOTA
POLYAIR Bellows Air Bag Cradle Kit W/ Reinforcement Plate -...
$242.00
This airbag cradle kit is specifically designed to allow your 75-79 series to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveller.
Do you need maximum wheel travel with no down travel restrictions? then this is the Airbag kit for you
CompatibilityTOYOTA
POLYAIR Bellows Air Bag Cradle Kit. - ABC100
$242.00
This Airbag Cradle kit is specifically designed to fit the 88206-2 & 88206-2R kits for the RG Colorado & Isuzu Dmax "No Drill" Bellow kits. The Airbag Cradle is specifically designed to allow your leaf sprung vehicle to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveler.
Compatibility
FORD AUSTRALIA
MAZDA
NISSAN
TOYOTA
FRONT RUNNER Wind Fairing For Low Profile Rack / 1345Mm/1425Mm(W)...
$215.10
$239.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1262mm (49.7") L x 2mm (0.1") W x 127mm (5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER Recovery Device And Gear Holding Side Brackets -...
$215.10
$239.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:4.88 kg (10.8 lbs)
FRONT RUNNER Land Rover Defender Puma (2007-2016) Gullwing Box Shelf-...
$215.10
$239.00
Shelf made from plywood and powder-coated mild steel.Up to 6 of these shelves can be used in a gullwing box.Shelf has slots cut in to allow for various fixing straps or elastic straps to be used to secure plates or other items.
Consists of:1x Mild steel & wood Shelf1x Installation KitMaterial used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steelProduct dimensions:264mm (10.4") L x 856mm (33.7") W x 36mm (1.4") HWeight:3.8kg (8.4lbs)
FRONT RUNNER Land Rover Defender 90/110 (1983-2016) Fender Protector /...
$215.10
$239.00
A 1.6mm thick aluminium tread plate that fits on top of the fender of your vehicle for added protection.
Made from black powder coated aluminium.
Protects the fender against dents and scratching.
Suitable for all Defender models.
BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front RunnerMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2.2kg (4.85lbs)Shipping Dimensions:Width: 380mm (15")Length: 1130mm (44")Height: 35mm (1")Shipping Weight:Weight: 2.2kg (5lbs)
FRONT RUNNER Under Rack Table Bracket - TBRA039
$214.20
$238.00
Transport your Front Runner Table underneath your roof rack with this noise-free, easy-access solution. These off-road tough brackets can be mounted either parallel or perpendicular to the roof rack's slats giving you the option to access the table from either the side or rear of the vehicle.
These brackets have been designed to work in conjunction with the Under Rack Table and Under Rack Table Latch to make transporting a sturdy table as simple and effortless as possible.
Under Rack Table:
A no-noise and secure storage solution designed specifically for the Under Rack Table.
The brackets are easily installed and can be mounted either parallel or perpendicular to the roof rack's slats giving you the option to access the table from either the side or rear of the vehicle.
Made from steel and black powder-coated in the same durable and corrosion-resistant coating as Front Runner racks.
Under Rack Table Latch:
Keeps the Under Rack Table securely stored in the Under Rack Table Brackets.
Secured to the top of the Slimline II rack using the T-slot and clamps over the lip of the table to keep it in place.
A rubber insert prevents rattling and damage to the table.
Spring-loaded for ease of use.
Lockable for added security.
Made of steel that is black powder coated in the same durable and corrosion-resistant coating as the Front Runner racks.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.Not all Foot Rails accommodate side mount Tables. If unsure? Please contact the Front Runner Help Center.
Consists of:2 x Table Slide Bracket1 x Table LatchInstallation HardwareFitment Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:Single Side Bracket Dimensions:980mm (38.6") L x 63mm (2.5") W x 44mm (1.8") H
Latch Dimensions:50mm (2") L x 50mm (2") W x 115mm (4.5") HWeight:4kg (8.8lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2166Mm...
$213.30
$237.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 11 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 11 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2046mm (80.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.6kg (7.9lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Universal Drop Down Tailgate Table - TBRA054
$211.50
$235.00
Elevate your snack or drink stops when adventuring in your vehicle with this Universal Drop Down Tailgate Table. Incredibly, it can be fitted onto any flat surface, providing a handy, on-the-go workspace. Perfect for putting the kettle, cups, glasses, or snacks on.
This Universal Drop Down Table will fit on any flat surface equal to, or larger than: 640mm/25.2" W x 330mm/13" H.
It is a universal drop down table features a large working surface of 615mm/24.2" W x 257mm/10.1" L, perfect for small cooking appliances, kettle/coffee station.
Stores neatly at 64mm/2.5" when closed.
The Universal Drop Down Table lowers to open at 90 degrees from the mounted base.
The table latch features a hole to securely lock the drawer in place, Rack Accessory Lock / Small can be used. *Sold Separately
Maximum load: 20Kg (44.1lbs).
Drilling is required for installation.
Installation hardware and fitment guide included.
Consists of:1 x Table Assembly1 x Catch Assembly2 x Arm Assembly2 x Mounting Bracket (1 Left Hand side & 1 Right Hand side)Installation HardwareFitting Instructions
Product Dimensions:Closed Dimensions:64mm (2.5") L x 636mm (25.03") W x 320mm (12.60") H
Fully Opened Dimensions:264mm (10.4") L x 636mm (25.03") W x 320mm (12.60") H
Weight:3.2kg (7.05lbs)
Load Rating:20kg (44.1lbs)
LIGHTFORCE Viper 10" Double Row Light Bar - LFLB10D
$209.70
$233.00
The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts
FRONT RUNNER Rack Ladder Side Mount Bracket - RRAC269
$208.80
$232.00
A bracket set that attaches to the side profile of your Slimline II or Slimpro Van Roof Rack.
Adjustable to suit all vehicle types and load beds.
Mounts your Rack Ladder to these brackets to access the roof of your vehicle.
These brackets can be left on your rack without being obtrusive.
Made from high-grade steel and powder coated with the same durable all-weather epoxy powder coating as the Front Runner racks.
Features
Consists of:
1 x Pair of Ladder Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
182mm (7.2") L x 87mm (3.4") W x 397mm (15.6") H
Weight:
3kg(6.6lbs)
MSA Delux Coffee Kit Cream - 45043
$207.00
$230.00
SUITS: All MSA 4X4 Storage Drawers
Fits snuggly into a MSA 4X4 Storage Drawer System
FEATURES: CONTENTS
1 x 600ml Thermo Coffee Plunger
2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation
2 x 500ml Storage Canisters for coffee, sugar or creamer
1 x 30ml Coffee Measuring Spoon
2 x MSA 4X4 Branded Teaspoons
Mirco Fibre Cleaning Cloth
STORAGE BAG
Spill and water-resistant high quality Hypalon exterior and PVC interior
Carrying handle
Zip with double MSA 4X4 branded zip pulls
INCLUDES:
2 Year Manufacturer’s Warranty on all items
Care and safety document
(Coffee beans NOT included)
MSA Delux Coffee Kit Black - 45042
$207.00
$230.00
SUITS: All MSA 4X4 Storage Drawers
Fits snuggly into a MSA 4X4 Storage Drawer System
FEATURES: CONTENTS
1 x 600ml Thermo Coffee Plunger
2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation
2 x 500ml Storage Canisters for coffee, sugar or creamer
1 x 30ml Coffee Measuring Spoon
2 x MSA 4X4 Branded Teaspoons
Mirco Fibre Cleaning Cloth
STORAGE BAG
Spill and water-resistant high quality Hypalon exterior and PVC interior
Carrying handle
Zip with double MSA 4X4 branded zip pulls
INCLUDES:
2 Year Manufacturer’s Warranty on all items
Care and safety document
(Coffee beans NOT included)
FRONT RUNNER Rotopax Side And Top Mount Kit - RRAC112
$206.10
$229.00
Free up rack space and mount fuel and water to the side or top of a Slimline II Rack.
The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack.
The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable.
Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.
Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs).
Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack.
Installation hardware and fitting instructions included.
PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.
Features
Consists of:
1 x RotoPax Mounting Plate (RRAC105)
1 x Pair of RotoPax Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
97mm (3.8") L x 480mm (18.9") W x 243mm (9.6") H
Weight:
2.88kg (6.4lbs)
FRONT RUNNER Vertical Jerry Can Holder - JCHO019
$205.20
$228.00
Front Runner Vertical Jerry Can Holder - JCHO019
Secure your fuel supply with confidence using the Front Runner Vertical Jerry Can Holder. Designed to safely hold a 20L NATO/Wedco-style military jerry can, this heavy-duty holder features a durable stainless steel latch system with an integrated safety catch to keep your fuel container firmly in place, even during demanding off-road adventures.
Constructed from black powder-coated stainless steel for maximum durability and corrosion resistance, this holder is built to withstand harsh environments and years of rugged use. The locking strap design covers the jerry can cap, allowing you to add a padlock for added security and peace of mind when travelling or leaving your vehicle unattended.
Key Features
Designed for 20L NATO/Wedco-style military jerry cans.
Heavy-duty stainless steel latch with integrated safety catch.
Keeps jerry cans securely mounted during off-road travel.
Lockable design helps protect fuel from theft.
Black powder-coated stainless steel construction for superior durability.
Corrosion-resistant finish for long-lasting performance.
Vertical mounting configuration saves valuable storage space.
Ideal for touring, overlanding, camping, and work vehicles.
Benefits
Provides secure transport of fuel in challenging conditions.
Reduces movement and vibration of mounted jerry cans.
Offers additional security with optional padlock compatibility.
Built to withstand years of off-road use and exposure to the elements.
Compatibility
Suitable for 20L NATO/Wedco-style military jerry cans.
Compatible with padlocks for added security.
Not suitable for Scepter-style fuel containers.
Not suitable for roof rack fitment.
Important Information
Jerry can and padlock sold separately.
The retaining strap covers the jerry can cap for enhanced security.
Designed for vertical mounting applications only.
Warranty
Manufactured to Front Runner's high-quality standards, providing dependable performance for long-term touring and off-road use.
FRONT RUNNER Wind Fairing For Low Profile Rack / 1165Mm/1255Mm(W)...
$202.50
$225.00
Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing for Low Profile rack kits. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Consists of:1 x Wind Fairing4 x Brackets1 x Rubber BladeInstallation HardwareFitting instructions
Materials used:Black powder coated aluminumEPDM Rubber
Product Dimensions:1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H
Weight:1.5kg (3.3lbs)
FRONT RUNNER Land Rover Discovery Lr4 Battery Bracket- - BBLD004
$202.50
$225.00
This battery bracket allows you to fit an additional battery to your vehicle by mounting as an additional bracket under your vehicle's hood.
Includes all fitment parts.
Made out of black powder coated high strength steel.
Fits Right Hand Drive vehicles.
NOTE: Not suitable for models fitted with an Auxiliary heater.
FRONT RUNNER Roof Top Tent Cover / Black - TENT063
$199.80
$222.00
Store Pick-Up Only: This product is available for collection from our store only and is not available for shipping. Contact us on 1300 856 888 for more information or to confirm availability before placing your order.Product Description
A durable replacement tent cover for the Front Runner Roof Top Tent.
Made from 1000D PVC.
Features
Material used:
1000D PVC
Product Dimensions:
1320mm (52.0") L x 1220mm (48") W x 330mm (13") H
Weight:
3.08kg (6.8lbs)
Color:
Black
FRONT RUNNER Roof Top Tent Cover / Tan - TENT035
$199.80
$222.00
A durable tent cover made from 1000D PVC protects your tent when not in use.
Features
Material used:
1000D PVC
Product Dimensions:
1255mm (49.4") L x 1355mm (53.3") W x 310mm (12.2") H
Weight:
3.08kg (8.4lbs)
Color:
Tan
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
