FRONT RUNNER 10 Led Light Bar Vx250-Sp / 12V/ 24V...
$157.50
$175.00
Don’t let darkness throw shade on your adventures. Keep exploring after nightfall with the 10" LED Light Bar. The high-performance LEDs with OSRAM technology, throw 1500 lumens over 37m. It features an intelligent reflector design that diverts the light from the LEDs so that oncoming traffic is not directly exposed to the light; as well as an additional yellow cover, that won’t attract insects to your campsite.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislation of the countries must be observed.
Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
The mounting bracket includes side guards to protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris.
Fitment guide and installation hardware included.
Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
FRONT RUNNER 4"/100Mm Led Flood Light W/ Bracket - RRAC059
$157.50
$175.00
LED flood light for illumination around vehicle and campsite. Comes standard with Front Runner custom tiltable bracket for fitting to the front, side or rear of the Roof Rack.
LED flood light for illumination around vehicle and campsite.
Comes standard with Front Runner tiltable mounting bracket for fitting to the front, side or rear of the Roof Rack.
Powered by power cord from vehicle 12v accessory outlet (Hella Extension Cord - 3m/10').
Bracket has power inlet and outlet to power light and additional 12v accessories simultaneously.
Special regulations and legislation within each country should be taken into consideration before use.
Note: For compatibility with the Slimsport or Slimpro Van Rack the Slimsport Side Mount Accessory Bracket / Small, is required. *sold separatelyNote: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
7 Watt Square LED Light Specifications:Input Voltage: 9-32 Volts DCPower Consumption: 27 WattsAmperage Draw: 2.1 Amps @ 12 VLumen Output: Approx. 1700Beam Pattern: Flood PatternBeam Angle: 60 Degree FloodHousing Material: AluminumMounting Bracket: Steel powder coatedLens Material: Polycarbonate Dust Proof, Water Proof!
FRONT RUNNER Pro Bed Recovery Bracket - PBAC010
$154.80
$172.00
When stuck, you want quick access to your recovery boards. This is exactly what the Pro Bed Recovery Bracket offers, allowing you to conveniently attach your MAXTRAX, Tred Pro or Tred GT to the Pro Bed System.
This Pro Bed Recovery Bracket bolts on the top and bottom side of the Pro Bed System.
To attach your MAXTRAX, use the included Pro Bed Recovery Device Mounting Hardware or MAXTRAX Mounting Pin Set * Sold Separately.
The included Pro Bed Recovery Device Mounting Hardware can be used to mount your Tred Pro and Tred GT Recovery Boards.
Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit.
As a universal solution, the Pro Bed Universal Accessory Mount is available.
For a complete water solution, Front Runner offers the Pro Bed Water Kit / 20L.
Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack.
Features
Consists of:
1 x Pro Bed Universal Accessory Mount
1 x Pro Bed Recovery Device Mounting Hardware
Installation Hardware
Fitment Guide
Materials used:
Black powder coated steel
Product Dimensions:
490mm (19.3") L x 200mm (7.9") W x 30mm (1.9") H (Per Single Bracket)
Weight:
3.28kg (7.2lbs)
FRONT RUNNER Winch Plate - WPLA001
$152.10
$169.00
A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.
A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.This allows a winch to sit securely on the chosen vehicle.
Consists of:1 x Winch Plate
Product Dimensions:600mm (23.6") L x 190mm (7.5") W x 87mm (3.4") H
Weight:5.5kg (12.1lbs)
FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack 40In Light Bar...
$152.10
$169.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for .
Allows fitment of 40" Front Runner light bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black Powder Coated Steel
Product Dimensions:1150mm (45.3") L x 160mm (6.3") W x 121mm (4.8") H
Weight:2.36kg (5.2lbs)
FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack Wind Fairing -...
$152.10
$169.00
Smooth out your ride in Ford Ranger in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford Ranger .
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Ford Ranger Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1150mm (45.3") L x 161mm (6.3") W x 131mm (5.2") H
Weight:2.92kg (6.4lbs)
FRONT RUNNER Pro Bed Rack Side Molle Panel / 1400Mm...
$150.30
$167.00
Add this strong, steel Side Molle Panel to make your Pro Bed Rack even more versatile. This 1400mm/55.1" long, Molle Panel easily slides into the side extrusions to create that extra storage space we all need. A great place to put gear you might need in a hurry.
This Pro Bed Rack Side Molle Panel creates even more storage space to attach various accessories to the outside of the bed rack for easy access.
It fits onto the sides of the Pro Bed Rack by sliding into the side extrusions. No drilling is required.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
Features
Consists of:
4 x Molle Panel
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1400mm (55.12") L x 30mm (1.18") W x 496mm (19.53") H
Weight:
9.2kg (20.3lbs)
MSA PREMIUM CUTLERY PACK
$150.30
$167.00
20004 PREMIUM CUTLERY PACK
Part Number: 20004
Luxury and camping, does go together.
The MSA 4x4 Premium Cutlery Pack brings a touch of luxury to a camping trip or day out with family. All the cutlery items required to make a simple lunch or a three course dinner under the stars are contained within the durable, hard wearing 12oz premium canvas pack. Each item is manufactured from high quality, food grade materials and are MSA 4x4 branded for a distinctive look.
The MSA 4x4 Cutlery Pack contains, a cutlery set, made with 410 stainless steel and finished with a black PVD (Physical Vapor Deposition) coating. Along with a multi purpose set of sharp, high quality knives, made with black Teflon coated stainless steel and a durable polypropylene handle. Also included is an essential set of utensils, with a spatula and serving spoon made with PA6 nylon coated in food grade silicone and a pair of tongs made with 430 stainless steel coated in food grade silicone. And finally a sustainably sourced bamboo cutting board, coated with a food grade oil, creating a higher level of hygiene, surface protection and product longevity.
Perfectly compliments an MSA 4x4 Clip-on Table or Drop Slide with Table and the light weight compact design allows it to easily stow away within an MSA 4x4 Storage Drawer System.The MSA 4x4, 2 Year Manufacturer’s Warranty applies to all the components.
NOTE: Sharp objects contained inside, please handle with care. Hand wash only, damage from dish washing MAY NOT be covered by the MSA 4x4 2 Year Manufacture's Warranty. General maintenance of the Bamboo Cutting Board requires regular recoating of food grade oil.
Includes:
Premium Canvas Pack
Cutlery Set:- 6x Knives- 6x Forks- 6x Tablespoons- 6x Teaspoons
Cooking Knives Set- 1x Cleaver Knife- 1x Chef Knife- 1x Paring Knife
Utensil Set- 1x Spoon- 1x Spatula- 1x Tongs
Bamboo Cutting Board
Features:
Durable, hard wearing 12oz premium canvas pack
Light weight and compact
Convenient, zip secured pocket
Velcro flat to secure cutlery items
Elastic straps to hold cooking knives secure
Elastic straps to hold utensils secure
Pocket to hold cutting board secure
All items are MSA branded
2 Year Manufacture's Warranty on all items
FRONT RUNNER Wolf Pack Pro Cargo System Bracket - PBAC001
$149.40
$166.00
Mount or remove your Wolf Pack Pros in seconds from your Pro Bed System or Pro Bed Rack Kit with this specially-designed side-mounting system. These durable brackets will hold your storage bin securely in place through any terrain while giving you easy access to all your adventure gear when you need it.
This Cargo System Bracket secures the Wolf Pack Pro to the side of the Pro Bed System and Pro Bed Rack Kit.
The Wolf Pack Pro is side-mounted, allowing quick and easy access to all your adventure gear while keeping it safe from the elements.
Made of high-strength steel and sealed with the same durable, weather-resistant powder coating as the Front Runner Racks.
The top and bottom latches are lockable with a Rack Accessory Lock / Small, preventing unwanted access.
Features
Consists of:
2 x Mounting Brackets
2 x Latches
Hardware Kit
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
289mm (11.4") L x 486mm (19.1") (W) x 492mm (19.4") H
Weight:
3.66kg (8.07lbs)
FRONT RUNNER Bat Wing/Manta Wing Awning Brackets - RRAC074
$148.50
$165.00
Easily mount your Manta Wing or Bat Wing Awning to a Slimline II roof rack with these sturdy Front Runner brackets.
These corrosion resistant brackets secure a Manta Wing or Bat Wing Awning to the side profile of a Slimline II roof rack.
No drilling required. The brackets simply bolt onto the t-slots in the side profile of your Slimline II Roof Rack.
Pre-drilled mounting points designed specifically for Manta/Bat Wing Awnings allow installation in mere minutes.
Made from steel and black powder coated with the same durable, weather resistant coating as the Slimline II Roof Rack.
Consists of:2x Awning bracketsBolt kitMaterials used:Black powder-coated steelProduct dimensions:L 152mm (6") x W 85mm (3.3") x H 198mm (7.8")Weight:2.8kg (6.2lbs)
FRONT RUNNER Universal Awning Brackets - RRAC036
$148.50
$165.00
These brackets, sold in a set of three (3), are secured to your Awning which is then installed onto the side profile of your Front Runner Slimline II roof rack.
Pre-cut slotted holes allow easy attachment. No drilling required.
Each bracket fastens to the top T-slot system and to the bottom of the Slimline II roof rack side profile.
Made from steel to ensure durability, and black powder coated with the same weather resistant coating as the Slimline II roof rack.
NOTE: Suitable for the following awnings:
Foxwing 270 Awning
Darche Eclipse 180 and 270 Awnings
NOT SUITABLE FOR EASY OUT AWNINGS
Features
Consists of:
3x Awning brackets
Nuts and bolts kit
Materials used:
Black powder-coated steel
Weight:
2kg (4.4lbs)
FRONT RUNNER Subaru Xv Crosstrek 2Nd Gen (Gt) (2017-2023) Slimsport...
$146.70
$163.00
Smooth out the ride in your Subaru XV Crosstrek in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1140mm (44.9") L x 171mm (6.7") W x 129mm (5.1") H
Weight:2.89kg (6.4lbs)
FRONT RUNNER Subaru Xv Crosstrek 2Nd Gen (Gt) (2017-2023) Slimsport...
$146.70
$163.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for .
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1140mm (44.9") L x 163.5mm (6.4") W x 116mm (4.6") H
Weight:2.1kg (4.6lbs)
FRONT RUNNER Land Rover Defender Tdi/Td5 (1983-2006) Gullwing Box Shelf...
$143.10
$159.00
A shelf that fits into the Front Runner Gullwing Box for the Land Rover Defender TDI/TD5.Use these shelves to create different sections in the Gullwing Box for storing goods, crockery and supplies.Consists of:
1x Wooden shelf1x Mild steel frame1x Fastening KitMaterial used:
Shelf: Stained PlywoodFrame: Black powder-coated mild steelProduct dimensions:
L 209mm (8.2") x W 997mm (39.3") x h 36mm (1.4")Weight:3.8kg (8.4lbs)
FRONT RUNNER 4 Led Light Cube Mx85-Sp / 12V /...
$139.50
$155.00
Driving in the dark? The MX85-SP is a strong, reliable, LED high-beam headlight. The far field illumination makes it ideal to brighten any adventure.
Four (4) high-performance LED working light reaches a distance of 110m at a 13.5 degree angle with a color temperature of 6000 Kelvin producing daylight lighting conditions.
Dual lighting functions include the classic working light with up to 1250 lumen, and the other is a stylish X shape LED working.
Polycarbonate lens, durable to withstand off-road conditions.
Full LED high beam polarity protection automatically breaks the circuit in the event of over-voltage, which ensures a long lifespan.
Equipped with an integrated driver and thermal management system, eliminating the risk of overheating.
12V compatibility for diverse requirements and vehicles from off-road to recreational and agricultural.
Special regulations and legislation within each country should be taken into consideration before use.
Secures to your Roof Rack with 4" LED OSRAM Light Cube MX85-WD/MX85-SP Mounting Bracket.
Optional LED Light Bar Wire Harness AX 2LS or LED Light Bar Wire Harness AX 1LS are available and sold separately.
Note: These powerful working lights are permitted only for off-road applications and must not be used on public roads.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Light cube with bracket1 x Bolt Kit
Dimensions:Light cube:85mm (3.3") L x 57mm (2.2") W x 85mm (3.3") H
Light cube with supplied bracket:85mm (3.3") L x 57mm (2.2") W x 121.5mm (4.8") H
Weight:500g (17.6oz)
Special Notes:Product type: Off-roadSKU: LEDDL101-SP / 4052899526532Lumens: 125012V22/2W1.83/0.17 AmpsColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 years
FRONT RUNNER 4 Led Light Cube Mx85-Wd / 12V /...
$139.50
$155.00
Driving on difficult terrain? The MX85-WD, is a strong, reliable, LED high-beam headlight. The near field illumination makes it ideal to navigate off-road trails.
Dual lighting functions include LED working light and the LED working spotlight that provides stylish X shape light.
Light beam reaches a distance of 55m at a 43.5 degree angle and delivers a luminosity of 1250 lumens.
Polycarbonate lens, durable to withstand off-road conditions.
Features an over and under voltage protection up to 18 volts.
Equipped with an integrated driver and thermal management system, eliminating the risk of overheating.
Excellent compatibility for diverse requirements and vehicles from off-road to recreational and agricultural.
Special regulations and legislation within each country should be taken into consideration before use.
Secures to your Front Runner Roof Rack with 4" LED OSRAM Light Cube MX85-WD/MX85-SP Mounting Bracket.
Optional LED Light Bar Wire Harness AX 2LS or LED Light Bar Wire Harness AX 1LS are available and sold separately.
Note: These powerful working lights are permitted only for off-road applications and must not be used on public roads.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Light cube with bracket1 x Bolt Kit
Product Dimensions:Light cube:85mm (3.3") L x 57mm (2.2") W x 85mm (3.3") H
Light cube with supplied bracket:85mm (3.3") L x 57mm (2.2") W x 121.5mm (4.8") H
Weight:500g (17.6oz)
Special Notes:Product type: Off-roadSKU:LEDDL101-WDLumens: 125012V22/2W1.83/0.17 AmpsColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 years
LIGHTFORCE Universal Wiring Harness for Driving Lights – Plug &...
$137.70
$153.00
Lightforce BEAST 3-Mode Wiring Harness Kit
Complete your BEAST setup with true plug-and-play simplicity. This dedicated Lightforce wiring harness is specifically designed for BEAST 3-mode LED driving lights, allowing seamless integration and full control of Spot, Flood, and BEAST modes.
No complex wiring or guesswork required — simply connect and get your lights running quickly and reliably.
Key Benefits
Designed specifically for Lightforce BEAST 3-mode driving lights
True plug-and-play installation — no rewiring required
Supports both positive and negative switching automatically
Includes HB3 and H4 adaptors for easy headlight integration
Single 8-pin connector for clean and simple installation
Easy Installation
Single moulded 8-pin connector (8mm diameter) for quick firewall routing
Direct connection to BEAST 3-mode smart switch
No need to modify factory wiring
Pre-configured for hassle-free setup
Smart Switching Compatibility
The harness automatically handles both positive and negative switching electronically, ensuring compatibility across a wide range of vehicles. Output to the switch is always positive, eliminating the need for manual configuration.
What’s Included
1 x 12V BEAST Driving Light Universal Wiring Harness (with relay)
1 x BEAST 3-Mode Rocker Switch (universal dash mount & TY2 compatible)
1 x HB3 Headlight Patch Harness
1 x H4 Headlight Patch Harness
Additional terminals, cable ties, and mounting hardware
User instructions
Specifications
Voltage: 12V
Relay: 40 Amp
Switching: Automatic positive or negative switching (electronic control)
Why Choose This Harness
Purpose-built for BEAST driving lights
Simplifies installation with minimal effort
Ensures reliable and consistent performance
Ideal for both DIY and professional installations
FAQs
Is this compatible with all vehicles?Yes, it supports both positive and negative switching, making it compatible with most 12V vehicles.
Do I need to modify my wiring?No, this is a plug-and-play system designed for easy installation without modifying factory wiring.
Does it include everything needed for installation?Yes, the kit includes harness, switch, adaptors, and mounting accessories.
Is this required for BEAST lights?It is recommended to ensure full functionality of the 3-mode system.
Complete Your Setup
Pair your Lightforce BEAST driving lights with the correct wiring harness to ensure optimal performance, reliability, and ease of installation.
MSA ORGDDT Seat Organiser with Dropdown Table
$136.80
$152.00
FEATURES:
Durable, heavy-duty canvas
12 pockets of various sizes
Injection moulded fold-away drop down table
Buckles & adjustable straps for easy installation
Fits any standard seat
Front Velcro strip to hold items in place & prevent sagging
FRONT RUNNER Pro Bed Rack Side Molle Panel / 1200Mm...
$135.00
$150.00
Add this strong, steel Side Molle Panel to make your Pro Bed Rack even more versatile. This 1200mm/47.2" long, Molle Panel easily slides into the side extrusions to create that extra storage space we all need. A great place to put gear you might need in a hurry.
This Pro Bed Rack Side Molle Panel creates even more storage space to attach various accessories to the outside of the bed rack for easy access.
It fits onto the sides of the Pro Bed Rack by sliding into the side extrusions. No drilling is required.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
Features
Consists of:
4 x Molle Panel
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1200mm (47.2") L x 30mm (1.18") W x 496mm (19.53") H
Weight:
7.7kg (17lbs)
ALPINE Wireless Rotary Controller for Volume & Camera Select –...
$134.96
$149.95
Alpine RUE-BK01A Wireless Rotary Knob Controller
Take full control with a simple turn. The Alpine RUE-BK01A Wireless Rotary Knob is designed to deliver quick, precise control of volume and camera switching, enhancing your driving experience with convenience and safety.
Engineered specifically for Alpine’s next-generation Halo display head units, this wireless controller integrates seamlessly with your system while maintaining a clean, factory-style finish.
Key Benefits
Wireless control for volume adjustment and camera switching
Seamless integration with Alpine Halo display systems
Quick, tactile control without relying on touchscreen input
Clean, OEM-style installation directly onto the display
Improves driving safety and ease of use
Designed for Alpine Halo Systems
The RUE-BK01A is purpose-built to work with Alpine’s latest display audio units, mounting directly onto the screen for a sleek and integrated look.
Compatible with Alpine iLX-511A
Compatible with Alpine iLX-F509A
Enhanced Control and Convenience
Adjust volume easily with a simple rotary motion
Toggle between vehicle cameras with a press
Reduces distraction by minimising touchscreen interaction
Provides intuitive control while driving
Wireless Installation
No complex wiring required
Direct mounting onto compatible Alpine displays
Maintains a clean and minimal dashboard setup
Specifications
Model: RUE-BK01A
Connection: Wireless
Functions: Volume control and camera selection
Power: Coin/button battery
Important Information
This product contains a coin/button battery. Please refer to the user manual for safety instructions and handling guidelines.
Why Choose Alpine Accessories
Designed specifically for Alpine head units
Premium build quality and finish
Improves usability and driver convenience
FAQs
Is this compatible with all Alpine head units?No, it is specifically designed for iLX-511A and iLX-F509A models.
Does it require wiring?No, it connects wirelessly for simple installation.
What functions does it control?It controls volume and allows switching between vehicle cameras.
Where does it mount?It mounts directly onto compatible Alpine Halo displays.
Upgrade Your Control
Add precise, convenient control to your Alpine system with the RUE-BK01A wireless rotary knob.
ALPINE S2-Series 5.25" 2 Way Coaxial Speakers - S2-S50
$134.96
$149.95
It's time for high-res
We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wonderous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound.
Innovative materials
Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 3/4" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers.
Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations.
Product highlights:
5-1/4" 2-way speakers
polypropylene/glass fiber/mica woofer cone with specialized rubber surround
3/4" silk dome tweeter
handles up to 55 watts RMS (170 watts peak power)
frequency response: 80-40,000 Hz
grilles not included
warranty: 1 year
MFR # S2-S50
Item # 500S2S50
What's in the box:
Two 2-way speakers
Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
Eight 3/4" Screws
8 Flat washers
8 Speed clips
Warranty information
On-line product registration information
Important Notice sheet
Declaration of conformity
Template and specs on box
FRONT RUNNER 1575Mm Slat Add-On Kit - RRSAP1575
$134.10
$149.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II rack tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.This slat will work with any Front Runner Slimline II Rack that is 1575mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
RRSAP1575 - 1575mm Slat Add-On KitConsisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1575 - 1575mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2.13kg (4.7lbs)Shipping Dimensions:Width: 115mm (5")Length: 1585mm (62")Height: 70mm (3")Shipping Weight:Weight: 2.45kg (5lbs)
FRONT RUNNER Transit Bag / Extra Large - RRAC131
$134.10
$149.00
Free up interior space with this sturdy, flexible, lightweight and extra large roof top storage bag. Ideal for clothes, camping gear, Front Runner Wolf Pack and Cub Pack storage containers, and whatever else would normally be carried in your trunk or cabin.
Manufactured from a durable 600d fabric which is dust proof and water resistant.
Nylon stitching ensures no rotting or deterioration when exposed to the elements.
Overlapping fabric lip with velcro seal to protects heavy duty zipper from dust and debris.
1100g PVC base is built to withstand the toughest journeys on top of the roof.
6 Triple-stitched tags for looping through Stratchits (or similar straps) and securing the bag to a Front Runner roof rack or other cargo carriers.
2 rubber-molded carry handles make for easy transport to your camp or lodging and hassle-free handling when loading or removing from the roof top.
1200mm / 47.2" in length.
Designed to fit 3 Wolf Pack Pro, up to 4/5 Cub Pack, or up to 4/5 Flat Pack.
Folds compact.
Consists of:1 x Extra Large Transit BagMaterial used:600d CanvasProduct Dimensions:Open Dimensions:1200mm (47.2") L x 500mm (19.7") W x 300mm (11.8") HFolded Dimensions:520mm (20.5") L x 410mm (16.1") W x 50mm (2") HWeight:1.78kg (3.9lbs)
FRONT RUNNER 10 Led Light Bar Vx250-Fl / 12V/ 24V...
$130.50
$145.00
Keep your adventure going after the sun sets with this 10” LED Light Bar. The ECE compliant high performing LED creates a strong 3000 Kelvin flood beam pattern so your trail will always be well-lit.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aids in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislations of the countries must be observed.
Secures to your Front Runner Roof Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
Connect you 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to a Roof Rack Power Point*, powered by Hella Extension Cord - 3m/10'* power cord from your vehicles 12V accessory outlet.
*Note: The Roof Rack Power Point and Hella Extension Cord - 3m/10' are sold separately.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Lightbar1 x Yellow cover1 x Bracket set1 x Bolt Kit
Product Dimensions:Light Bar:275mm (10.8") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with supplied bracket:328mm (12.9") L x 67mm (2.6") D x 55mm (2.2") H
Weight:875g (27.3oz)
Special Notes:Product type: On-road and off-roadSKU: LEDWL 115-FLFRLED supplier: OSRAMLumens: 150012/24V30W2.5 AmpsColor temperature: 3000 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: R112
FRONT RUNNER Tent Mount Kit / 6 Piece / Tall...
$126.90
$141.00
These 57mm (2.24") roof top tent mounting brackets allow extra clearance along your Front Runner Roof Racks side rails to allow room for certain rack accessories (eg. Awnings).
Made from black powder-coated steel.
All necessary hardware to mount the brackets to the Front Runner Roof Rack is included.
Features
Consists of:
6 x Tent Mount Kit / Tall Brackets
Materials used:
2mm (0.078) Black powder coated steel
Product Dimensions:
245mm (9.6") L x 70mm (2.4") D x 57mm (2.2") H
Weight:
2.25kg (5lbs)
FRONT RUNNER Land Rover Defender (1983-2016) Rear Bumper Bracket For...
$125.10
$139.00
Front Runner Hi-Lift Jack Rear Bumper Mount for Land Rover Defender
Carry your Hi-Lift Jack securely without the need for a roof rack using the Front Runner Hi-Lift Jack Rear Bumper Mount. Specifically designed for the Land Rover Defender, this rugged mounting solution allows you to store your jack conveniently on the rear bumper for quick access when recovery situations arise.
Constructed from black powder-coated high-strength steel, this durable two-piece bracket is engineered to withstand harsh weather conditions, rough tracks, and demanding off-road use. The rear bumper mounting position provides easy access to your Hi-Lift Jack without the need to climb onto your vehicle, making recovery equipment more accessible when you need it most.
In addition to its practical functionality, this bumper mount adds a distinctive off-road appearance to your Defender, enhancing both style and capability.
Key Features
Designed specifically for Land Rover Defender vehicles.
Securely mounts a 1.2m Hi-Lift Jack to the rear bumper.
Heavy-duty two-piece mounting bracket design.
Manufactured from high-strength steel.
Black powder-coated finish for corrosion resistance.
Lockable design for added security.
Provides quick and easy access to your recovery jack.
Enhances the rugged appearance of your Defender.
Benefits
Eliminates the need for roof rack-mounted jack storage.
Keeps recovery equipment easily accessible.
Protects your jack during off-road travel.
Offers a secure and convenient mounting solution.
Adds a functional off-road aesthetic to your vehicle.
Compatibility
Suitable for Land Rover Defender models.
Designed to carry one 1.2m Hi-Lift Jack.
Compatible with user-supplied padlocks for added security.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Built for long-term durability and outdoor use.
Important Information
Hi-Lift Jack sold separately.
Padlock not included.
Professional installation is recommended if you are unfamiliar with vehicle accessory fitting.
FRONT RUNNER Toyota Hilux/Fortuner (2016-Current) Battery Bracket - BBTH004
$125.10
$139.00
Toyota Hilux & Fortuner (2016-Current) Dual Battery Bracket - BBTH004
Upgrade your touring and off-road setup with the Front Runner Dual Battery Bracket, designed specifically for Toyota Hilux Revo and Toyota Fortuner diesel models. This heavy-duty mounting bracket allows you to securely install an additional 70Ah auxiliary battery in the engine bay, providing reliable power for fridges, lighting, communication equipment, and other accessories.
Engineered for demanding off-road conditions, the bracket utilises existing factory mounting points along with one additional drilled mounting point to create a strong and secure installation. Designed specifically for right-hand drive vehicles, it offers a practical and vehicle-specific solution for dual battery system upgrades.
Key Features
Designed for Toyota Hilux Revo and Toyota Fortuner diesel models.
Supports installation of an additional 70Ah auxiliary battery.
Vehicle-specific design for a secure and precise fit.
Utilises existing factory mounting points for simplified installation.
Requires only one additional drilled mounting hole.
Ideal for dual battery touring and off-road applications.
Strong construction designed to withstand harsh off-road conditions.
Includes detailed fitting and installation instructions.
Benefits
Provides additional power capacity for accessories and camping equipment.
Helps protect your starting battery from accessory power drain.
Suitable for touring, overlanding, camping, and remote travel.
Securely mounts an auxiliary battery within the engine compartment.
Designed specifically for long-term durability in demanding environments.
Compatibility
TOYOTA HILUX REVO 2.4GD Diesel (2016-Current)
TOYOTA HILUX REVO 2.8GD Diesel (2016-Current)
TOYOTA FORTUNER 2.4GD Diesel (2016-Current)
TOYOTA FORTUNER 2.8GD Diesel (2016-Current)
Right-Hand Drive (RHD) vehicles only.
Installation
Fits to existing factory mounting locations.
Requires one additional drilled mounting hole.
Supplied with detailed fitting instructions.
Important Information
Suitable for Right-Hand Drive vehicles only.
Battery, wiring kit, isolator, and electrical components are sold separately.
Professional installation is recommended for dual battery system setups.
Please verify battery dimensions and vehicle compatibility before purchase.
FRONT RUNNER Hose Kit For Tap Extension Bracket - WTAN054
$122.40
$136.00
Front Runner Hose Kit for Tap Extension Bracket - WTAN054
Improve the accessibility of your water system with the Front Runner Hose Kit for Tap Extension Bracket. Designed to extend the reach of your Front Runner water tank tap, this kit provides a convenient solution for installations where the tank is mounted in hard-to-reach locations such as roof racks, canopies, or vehicle storage systems.
Featuring durable food-grade hoses and secure fittings, the kit creates a reliable connection between your water tank and tap extension bracket while maintaining safe, clean water delivery. The leak-resistant design ensures dependable performance, making everyday tasks such as filling bottles, washing hands, and cleaning equipment more convenient at camp or on the road.
Easy to install and built for outdoor use, this hose kit is an ideal addition for overlanders, campers, tourers, and adventure travellers looking to optimise their water setup.
Key Features
Designed for use with Front Runner Tap Extension Brackets.
Extends tap reach for improved accessibility and convenience.
Includes durable food-grade hoses for safe water delivery.
Supplied with secure fittings for reliable installation.
Leak-resistant design helps maintain consistent water flow.
Compatible with Front Runner Pro Water Tanks and tap systems.
Quick and easy installation.
No special tools required for fitting.
Benefits
Makes accessing water easier when tanks are mounted in difficult locations.
Provides a cleaner and more convenient water dispensing solution.
Supports safe drinking water applications with food-grade materials.
Reduces strain and inconvenience when using vehicle-mounted water tanks.
Ideal for camping, touring, overlanding, and outdoor recreation.
Compatibility
Compatible with Front Runner Tap Extension Brackets.
Suitable for Front Runner Pro Water Tanks.
Works with Front Runner tap systems and accessories.
What's Included
Food-grade hose assembly.
Required fittings and connectors.
Components for connecting the water tank to a tap extension bracket.
Important Information
Designed for Front Runner water tank systems.
Please verify compatibility with your existing setup before purchase.
Inspect hoses and fittings regularly to ensure optimal performance.
FRONT RUNNER Pro Fork Mount Bike Carrier / Power Edition...
$122.40
$136.00
Upright bike carrier, made from strong steel and aluminum.
Powder-coated in the same durable finish as the Front Runner rack and load bars for durability.
Front fork clamp features a quick release that fits all standard fork dropouts.
Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires.
Quickly secure and adjust the rear wheel with the robust ratcheting buckle and strap.
Note: Fitment to a rack requires a minimum rack length of 1156mm (6 slats).
Note: This solution is not compatible with Boost Hubs/Forks.
Features
Consists of:
1 x Fork Clamp
1 x Rear Wheel Holder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel & aluminum
Rubber ladder strap
Plastic ratchet buckle
Overall Product Dimensions:
300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H
Rear Holder:
230mm (9.1") L x 176mm (6.9") W x 81mm (3.2") H
Front Clamp:
70mm (2.8") L x 152mm (6") W x 114mm (4.5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER 1475Mm Slat Add-On Kit - RRSAM1475
$119.70
$133.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1475mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1475 - 1475mm Slat
Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2kg (4.41lbs)Shipping Dimensions:Width: 110mm (4")Length: 1480mm (58")Height: 70mm (3")Shipping Weight:Weight: 2.36kg (5lbs)
FRONT RUNNER Tent Mount Kit / 6 Piece - TBMK027
$118.80
$132.00
A roof top tent negates the major hassle of pitching (and breaking down) a tent and also keeps you off the cold ground. Our Roof Top Tent weighs only 43kg and sleeps two comfortably. Use these mounting brackets to attach it to your Front Runner roof rack. These shorter brackets match the Roof Rack's low profile for a clean aesthetic.
Mount most roof top tents to the Roof Rack with these shorter brackets (30mm H) to match the rack’s low profile.
Black powder-coated steel.
Pre-cut mounting holes.
Mounting pieces (eg. bolts and nuts) included.
Consists of:6 x Tent Mount Kit Brackets
Materials used:2mm (0.078") Black powder coated steelProduct Dimensions:245mm (9.6") L x 60mm (2.4") D x 30mm (1.2") HWeight:2.1kg (4.6lbs)
FRONT RUNNER 10" Led Light Bar - LIGH900
$117.00
$130.00
Brighten up the road ahead and extend your adventures into the later hours with the 10” LED Light Bar. The light bar is constructed for durability and designed for versatility, both mounted onto Front Runner roof racks and for other off-vehicle uses.
Six high-performance LEDs provide better visibility with 2520 raw lumen and 6000 kelvin color.
Provides 120 degree flood beam pattern for close but wide range illumination immediately surrounding the vehicle.
This auxiliary light is equipped with a robust polycarbonate lens set in a die cast aluminum housing.
The 12V/24V LED Light Bar is versatile in application and is not limited to automotive use only.
Special regulations and legislation within each country should be taken into consideration before use.
Expected LED life of 30,000 hours.
Secures to your Front Runner roof rack with the LED 10inch Light Bar Bracket.
Consists of:1 x 10" Light Bar1 x Bracket Set
Materials used:Diecast aluminum housingPolycarbonate lensZinc alloy brackets
Product Dimensions:Light Bar:270mm (10.6") L x 58mm (2.3") W x 56mm (2.2") H
Light Bar with supplied bracket:270mm (10.6") L x 58mm (2.3") W x 70mm (2.8") H
Weight:17.4 kg (38.4lbs)
Special Notes:6pcs*5w high intensity CREE LEDSPower Consumption: 30WOperating Voltage: 10-30 DCWaterproof rate: IP 67Raw Lumen: 2520lmEffective lumen: 1740lmCurrent draw:12V/2.40A；24V/1.12ALife span:30000HColor Temperature: 6000K
ALPINE S2-Series 4" 2-Way Speakers - S2-S40
$116.96
$129.95
It's time for high-res
We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound.
Innovative materials
Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 3/4" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
4" 2-way speakers
polypropylene/glass fiber/mica woofer cone with specialized rubber surround
3/4" silk dome tweeter
handles up to 45 watts RMS (140 watts peak power)
frequency response: 97-40,000 Hz
sensitivity: 86 dB
grilles not included
warranty: 1 year
MFR # S2-S40
Item # 500S2S40
What's in the box:
Two 2-way speakers
Two 4x6 Adapter brackets
Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
Eight 3/4" Screws
Ten 5/16" Screws
Ten 1/4" Screws
10 Speed clips
10 Spacers
2 Adhesive backed gaskets
Warranty information
On-line product registration information
Important Notice sheet
Declaration of conformity
Template and specs on box
FRONT RUNNER Wolf Pack Pro / Twin Set - SBOX058
$116.10
$129.00
Our new stackable storage boxes are made from impact-resistant plastic, and now feature new extra-secure latching, providing extra durability so your gear will stay safe even when your rig gets dirty. If you have extra cargo, ordering this twin set adds even more value to your storage.
These plastic, workable sized storage boxes are easy to arrange in a cargo bed and vertical-sided to avoid wasted space. They stack securely for convenient storage in your vehicle thanks to the lids fitting neatly into the base of the box above it.
A set of 2 Wolf Pack Pro storage boxes.
Made from black, impact-resistant plastic.
Features new extra-secure latches sealing the Wolf Pack Pro.
Integrated grips for easy carrying.
Versatile. Use in the cargo bed, truck/boot, or on your roof rack.
Suitable for exterior storage.
Wolf Pack Pros form the heart of many Front Runner storage systems. The Front Runner Transit Bags hold 2-3 Wolf Pack Pros depending on Transit Bag size and Wolf Pack configuration. Front Runner Wolf Pack Drawer Systems provide a comprehensive and practical vehicle storage solutions.
For a padded storage solution, line the Wolf Pack Pro with a Flat Pack or Storage Box Foam Dividers to protect camera gear, kitchenware and other fragile items.
Use in conjunction with Wolf Pack Pro Rack Mounting Brackets or Stratchits as well as Black Tie Down Rings / Eye Nuts for a safe and secure roof rack storage solutions.
Wolf Pack Pro are not stackable with Wolf Pack.
PLEASE NOTE:Due to varying internal air pressure, the lid of the Wolf Pack Pro may occasionally prove difficult to open due to its sealing ability. To open, apply moderate pressure to the lid with one hand directly next to the latch, checking the latch is properly closed before unlatching.
To view a demonstration, please view video in the videos tab above.
Consists of:2 x Wolf Pack Pro
Materials used:Polypropylene black plastic
Product Dimensions: (Per Unit)External Dimensions:510mm (20.1") L x 400mm (15.7") W x 230mm (9.1") H
Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H
Weight: (Per Unit)3.65kg (8.1lbs)
FRONT RUNNER 1425Mm Slat Add-On Kit - RRSAJ1425
$116.10
$129.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1425mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1425 - 1425mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.93kg (4.25lbs)Shipping Dimensions:Width: 110mm (4")Length: 1430mm (56")Height: 70mm (3")Shipping Weight:Weight: 2.26kg (5lbs)
FRONT RUNNER Transit Bag / Large - RRAC130
$116.10
$129.00
Free up interior space with this sturdy, flexible, lightweight and large roof top storage bag. Ideal for clothes, camping gear, Front Runner Wolf Pack and Cub Pack storage containers, and whatever else would normally be carried in your trunk or cabin.
Manufactured from a durable 600d fabric which is 100% UV protected, dust proof and water resistant.
Nylon stitching ensures no rotting or deterioration when exposed to the elements.
Overlapping fabric lip with velcro seal to protects heavy duty zipper from dust and debris.
1100g PVC base is built to withstand the toughest journeys on top of the roof.
6 Triple-stitched tags for looping through Stratchits (or similar straps) and securing the bag to a Front Runner roof rack or other cargo carriers.
2 rubber-molded carry handles make for easy transport to your camp or lodging and hassle-free handling when loading or removing from the roof top.
1050mm / 41.3 in width.
Designed to fit 2 Wolf Pack, up to 3 Cub Pack, or up to 2 Flat Pack.
Folds compact.
Consists of:1 x Large Transit BagMaterial used:600d CanvasProduct Dimensions:Open Dimensions:1050mm (41.3") L x 440mm (17.3") W x 300mm (11.8") HFolded Dimensions:470mm (18.5") L x 330mm (13") W x 50mm (2") HWeight:1.46kg (3.4lbs)
FRONT RUNNER Expander Camping Chair - CHAI007
$115.20
$128.00
The Expander Camping Chair is praised for its high-quality materials, excellent design, and compact size, making it a durable and comfortable option for camping. Customers appreciate its easy folding and fast shipping, along with its classy appearance and minimal space requirements.
FRONT RUNNER Pro Thru Axle Bike Carrier / Power Edition...
$115.20
$128.00
Designed to mount bikes with 100/110mm x 12mm, 100/110mm x 15mm, and 110/110mm x 20mm thru-axles (Boost)
Compatible with pinch style forks such as Fox40, Manitou Dorado and Marzocchi 380
Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires.
Rear wheel holder features a ratchet buckle and strap that allows fast adjustment
Works with Front Runner Racks and Load Bars
Made from steel and aluminum and powder-coated for durability and longevity
Note: Installation requires a minimum rack length of 1156mm (six slats).
Features
Consists of:
1 x Front Fork Mount
1 x Rear Wheel Mount
1 x Pair of inserts for 12mm 100/110 Thru Axle
1 x Pair of Inserts for 15mm 100/110 Thru Axle
1 x Pair of inserts for 20mm 100/110 Thru Axle
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Black powder coated aluminum
Product Dimensions:
300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H
Weight:
1.5kg (3.3lbs)
FRONT RUNNER Axe Bracket - RRAC023
$112.50
$125.00
The lockable stainless steel cage keeps your axe head safe and out of the way when mounted to the side of the Front Runner Slimline II Roof Rack. Super simple installation – just slide the bolts and brackets into the side rail of the Slimline II Roof Rack Tray and tighten.
FRONT RUNNER Hi-Lift Jack Base Plate - JADA004
$112.50
$125.00
Front Runner Hi-Lift Jack Base Plate - JADA004
Improve the safety and stability of your vehicle recoveries with the Front Runner Hi-Lift Jack Base Plate. Designed to provide a solid foundation for your Hi-Lift jack, this essential recovery accessory helps prevent the jack from sinking into soft ground such as sand, mud, gravel, and other unstable surfaces.
Constructed from durable high-density polyethylene (HDPE), the base plate offers exceptional strength while remaining lightweight and easy to carry. Its textured surface enhances grip between the jack and the plate, helping to maintain stability and reduce movement during lifting operations.
Compact and easy to store in your vehicle, the Hi-Lift Jack Base Plate is an essential addition to any recovery kit, providing increased confidence and safety when tackling challenging off-road terrain.
Key Features
Provides a stable foundation for Hi-Lift jacks on soft or uneven terrain.
Helps prevent the jack from sinking into sand, mud, gravel, and loose surfaces.
Manufactured from durable high-density polyethylene (HDPE).
Textured surface improves grip and stability during lifting.
Lightweight design for easy transport and handling.
Compact size allows convenient storage in your vehicle.
Resistant to cracking, warping, and harsh outdoor conditions.
Ideal for off-road recovery and remote area travel.
Benefits
Improves safety when using a Hi-Lift jack on unstable ground.
Distributes weight over a larger surface area to reduce sinking.
Enhances lifting stability and confidence during vehicle recovery.
Provides reliable performance in a variety of off-road environments.
Easy to carry and store without taking up significant space.
Construction
Material: High-density polyethylene (HDPE).
Strong, lightweight, and weather-resistant.
Designed to withstand demanding off-road conditions.
Ideal Applications
4WD and off-road vehicle recovery.
Sand, mud, gravel, and uneven terrain.
Touring, overlanding, camping, and remote area travel.
Important Information
Designed for use with Hi-Lift jacks.
Always follow the jack manufacturer's safety guidelines during use.
Inspect the base plate regularly for damage before use.
FRONT RUNNER Land Rover Defender (1983-2016) Head Light Protectors -...
$112.50
$125.00
Keep your vehicle's headlights protected from damage with these tough, plastic coated, headlight protectors.
Made out of high strength steel.
Polyethylene plastic coated for protection against the elements.
Mounts to existing mounting points on your Land Rover Defender and uses the original nuts and bolts.
Designed specifically for your Land Rover Defender.
FRONT RUNNER Tap Extension Bracket - RRAC170
$112.50
$125.00
Installs to the side profile of your Slimline II Roof Rack.
Swings out 90 degrees from the side of the rack, allowing your water tap to clear the side of your vehicle.
The spring pin locks the extension bracket in a closed or opened position.
Features a shower head holder.
Used best with Hose Kit For Tap Extension Bracket.
Features
Consists of:
1 x Tap Extension Bracket
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
315mm (12.4") L x 187mm (7.4") W x 73mm (2.9") H
Weight:
1.3kg (2.9lbs)
FRONT RUNNER 1345Mm Slat Add-On Kit - RRSAG1345
$110.70
$123.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1345 - 1345mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.82kg (4.01lbs)Shipping Dimensions:Width: 110mm (4")Length: 1350mm (53")Height: 70mm (3")Shipping Weight:Weight: 2.17kg (5lbs)
FRONT RUNNER Potjie Pot/Dutch Oven Carrier - RRAC062
$110.70
$123.00
Create deliciously hearty meals out in the wilderness, fit for the avid explorer and overlanding veterans alike.
The Front Runner Potjie Pot/Dutch Oven Carrier is a safe and durable means of transporting your potjie pot/dutch oven where ever your travels may take you.
The potjie pot/dutch oven is placed centrally into the bracket with the three legs fitting into the holes in the three protrusions extending from the centre of the bracket. The supplied ratchet strap threads through the lid of the pot and fixes to pre-drilled points on the bracket.
Made of corrosion resistant steel and black powder-coated with an industry preferred, outdoor rated coating.
Features
Consists of:
Potjie bracket for No 2 & No 3 pot
Ratchet strap
Mounting hardware
Materials used:
Black powder-coated steel
Product Dimensions:
276mm (10.9") L x 229mm (9") W x 133mm (5.2") H
Weight:
2kg (4.4lbs)
FRONT RUNNER Single Jerry Can Holder - JCHO013
$108.90
$121.00
Front Runner Single Jerry Can Holder
Keep your fuel secure and easily accessible with the Front Runner Single Jerry Can Holder. Designed for 20L NATO/Wedco-style military jerry cans, this heavy-duty mounting solution provides a safe and reliable way to transport fuel during touring, overlanding, and off-road adventures.
The adjustable stainless steel latch features an integrated safety catch that firmly secures your jerry can, preventing movement and rattling even on rough terrain. The retention strap covers the jerry can cap for additional security and can be used with a cable lock or RRAC134 lock to help protect your fuel from theft while travelling.
Manufactured from black powder-coated high-strength steel, this holder is built to withstand years of harsh outdoor use. It is specifically designed to bolt directly onto Front Runner Roof Racks using the flat slotted rack slats, ensuring a strong and secure installation.
Key Features
Designed to securely hold one 20L NATO/Wedco-style military jerry can.
Adjustable stainless steel latch with integrated safety catch.
Retention strap covers the jerry can cap for added security.
Compatible with cable locks and RRAC134 lock.
Mounts directly to Front Runner Roof Racks.
Designed to fit the flat slotted slats of Front Runner rack systems.
Constructed from black powder-coated high-strength steel.
Built to withstand demanding off-road conditions.
Benefits
Provides secure transport of fuel during off-road travel.
Minimises movement, vibration, and rattling.
Helps deter fuel theft when paired with a compatible lock.
Offers a durable, long-lasting storage solution for adventure vehicles.
Compatibility
Suitable for 20L NATO/Wedco-style military jerry cans.
Compatible with Front Runner Roof Racks.
Works with cable locks and RRAC134 lock.
Not suitable for Scepter-style fuel containers.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Corrosion-resistant for long-term outdoor use.
Important Information
Jerry can and lock sold separately.
Designed specifically for NATO/Wedco-style jerry cans.
Always ensure fuel containers are securely fastened before travel.
ALPINE Prisma 12" Linking Plate - KTX-LK12
$107.96
$119.95
When it comes to bass, two is always better than one. Alpine's KTX-LK12 linking kit allows you to connect two Alpine S2-SB12 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures as well as all the hardware you'll need. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.
What's in the box:
Front link
Rear link plate
21" 3-Pin connection cable
Four M5x25mm screws
Four M5x12mm screws
4mm Allen key
Installation instructions
Other info:
MFR # KTX-LK12
Item # 500KTXLK12
FRONT RUNNER Extended Hi-Lift Jack Adaptor - 350Mm - JADA003
$107.10
$119.00
Front Runner Extended Hi-Lift Jack Adaptor 350mm
The Front Runner Extended Hi-Lift Jack Adaptor (350mm) is designed to provide a safer and more effective lifting solution for vehicles equipped with raised suspensions, aftermarket bumpers, recovery points, and roof rack-mounted accessories. By extending the reach of your Hi-Lift jack, this adaptor allows lifting from suitable mounting points without risking damage to your vehicle's bodywork or accessories.
Manufactured from precision-engineered heavy-duty steel, the adaptor is built to handle demanding recovery situations and challenging off-road conditions. Its corrosion-resistant finish provides long-term durability, ensuring reliable performance wherever your adventures take you.
Ideal for vehicle recovery, maintenance, tyre changes, and off-road adjustments, the Front Runner Extended Hi-Lift Jack Adaptor delivers the extra reach and stability required when lifting higher-clearance vehicles.
Key Features
350mm extended reach for lifted and high-clearance vehicles.
Designed for use with standard Hi-Lift jacks.
Provides safe lifting from suitable recovery and mounting points.
Heavy-duty steel construction for superior strength.
Precision-engineered for secure and reliable operation.
Corrosion-resistant finish for long-lasting durability.
Compatible with Front Runner recovery gear and accessories.
Ideal for off-road recovery, maintenance, and vehicle servicing.
Benefits
Improves lifting accessibility on modified vehicles.
Helps prevent damage to body panels and vehicle accessories.
Provides increased safety and stability during lifting operations.
Enhances the versatility of your Hi-Lift jack.
Built to perform in demanding off-road environments.
Construction
Material: Heavy-duty precision-engineered steel.
Finish: Corrosion-resistant protective coating.
Designed for rugged off-road and recovery applications.
Compatibility
Compatible with standard Hi-Lift jacks.
Suitable for lifted vehicles and vehicles with increased ground clearance.
Designed for use with Front Runner recovery equipment and accessories.
Ideal Applications
Off-road vehicle recovery.
Suspension and tyre maintenance.
Touring and overlanding vehicles.
Vehicles fitted with aftermarket bumpers and recovery points.
Important Information
Always follow Hi-Lift jack manufacturer safety guidelines.
Ensure the adaptor is correctly installed before use.
Inspect equipment before each recovery or lifting operation.
FRONT RUNNER Rack Adaptor Plates For Thule Slotted Load Bars...
$107.10
$119.00
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
Steel.
Black powder coated.
Mounts onto individual slats via the T-slot system.
T-slot bolts included.
Pre-cut fitment holes.
Features
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") high strength steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 290mm (11.42") x W 74mm (2.91") x H 27mm (1.06")
Weight:
2kg (4.4lbs)
MSA URL Ultimate Tool Roll
$107.10
$119.00
Dimensions: 120(L) x 42(H) When opened
FEATURES:
120cm L x 42cm H when open
Heavy-duty double-layered 12oz canvas
Separate top flap and elastics to keep your tools in place
18 pockets of various sizes
2 x 50mm Velcro seal seat belt wraps
Heavy duty moulded rubber carry handle for added convenience
Allows for safe and easy storage anywhere
MSA ORGS Seat Organiser
$107.10
$119.00
FEATURES:
Durable, heavy duty canvas
12 pockets of various sizes
Buckles & adjustable straps for easy installation
Fits any standard seat
Front Velcro strip to hold items in place & prevent sagging
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
