4WD Parts Deals and Special Offers

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2166mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3") L x 1255mm (49.4") W x 63mm (2.5") H Weight:5.38 kg (12.8 lbs)

Upgrade your pickup truck’s carrying capacity and easily transport adventure sports gear such as bikes, kayaks, and fishing rods with this Canopy Load Bar Kit. These bars are custom-designed to be mounted on a canopy via a set of supplied mounted feet without compromising the canopy. Easily kit out your rig with a variety of compatible Front Runner accessories thanks to the sliding nut t-slots which allow for quick fitting and removal. Comes with all hardware and components needed to fit load bars on your Canopy, including four (4) mounting feet, two (2) 1575mm load bars, an installation kit and fitting instructions. These load bars are mounted to your canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA014 - Canopy Load Bar Kit / 1575mm (W) - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.98kg (13.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1670mm (66")Height: 145mm (6")Shipping Weight:Weight: 6kg (13lbs)

Direction-Plus™ ProVent® oil separator kit PV645DPK suits Isuzu D-Max, MU-X and Mazda Bt-50 4JJ3-TCX (2020-2022) models. The ProVent® oil separator kit PV645DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. HOW IT WORKS Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance.

ALPINE S2-SERIES 10" HALO SUBWOOFER ENCLOSURE-S2-SB10V A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. S-Series subwoofers are designed and engineered for extreme bass performance exceeding their nearest rivals and modest price point. Furthermore, S-Series Halo Subwoofer enclosures are perfectly matched to S-Series amplifiers and S-Series speakers for an overall cohesive system theme and optimised sound performance. Optimal Sound Performance The S2-SB10V delivers seriously powerful low-frequency bass and with their highly efficient design produces best-in-class bass output. The USA designed enclosure features an optimised vent and rounded internal port edges that maximises output performance of the subwoofer. The result is a higher total sound output for deep, powerful and accurate bass coupled with S-Series renowned reliability and endurance. Built to Perform Without compromise the S2-SB10V is built from high-quality construction materials to achieve a custom look, without the custom work. Made from 3/4-inch medium density fibreboard (MDF) with internal edge bracing, the S2-SB10V is sturdy and rugged, yet stylish with a premium black carpet covering and brushed aluminium finish on the metallic front baffle. Tuned for S-Series The S2-SB10V includes a preloaded S-Series S2-W10D2 10-inch subwoofer that’s tuned to 36Hz for optimised performance with Alpine S-Series sound system speakers and amplifiers. Dual 4Ω voice coils are wired in parallel for a 2Ω load that’s compatible with the S-Series S2-A60M Mono Power Amplifier. Gold-plated binding post terminals allow for speaker wire, ring terminal, or quick disconnect banana plug connections. Stand Out From the Crowd The Alpine Halo platform modernises the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and silver accent of the Alpine Halo Display, the S2-SB10V shares the same design cues, with a curved silver trim and a metallic front baffle. The S2-SB10V offers not only premium sound performance, but also elevates the interior of the vehicle for a subwoofer you can be proud to show off. KTX-H10 Linking Kit  ProLink™ is unique to Alpine and allows you to link two S2-SB10V enclosures together using an optional KTX-H10  Linking Kit (sold separately) to create a dual subwoofer-enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer immediately if more bass is desired, or gives you the capability to upgrade your bass later-on. Features Includes Preloaded S2-W10D2 10” S-Series Subwoofer Ground-breaking Alpine Halo Design ProLink™ Ported Enclosure Design USA Designed for Optimal Bass and Sound Quality Performance CARB compliant 3/4-inch MDF construction Premium Black Carpet Silver Alpine Embossed Side Logo Badge Brushed Aluminium Finished Metallic Front Baffle KTX-H10 Linking Kit Ready KTE-10G.2 Mesh Grille Ready   Specifications Peak Power Handling: 1800W RMS Power Handling: 600W High-Excursion Overhung Voice Coil Configuration 65mm Voice Coil 5-Layer DVC Winding on Aluminium Former Stacked High-Grade Strontium Ferrite Magnets High-Strength Steel Frame Progressive Spider with Reinforced Layer Tinsel Leads Perimeter Venting with Airflow Management System Optimised Dual Flare Pole Vent Concealed Mount Gasket Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap) High-Amplitude Multi-Roll (HAMR) Surround Dimensions: 16” W x 12.6825” H x 14.5” D Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with S2-A60M) 12 Gauge OFC Speaker Box Wire Binding Post Terminal Cup Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation) Nominal Impedance: 4Ω+4Ω Dual Voice Coil 2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit) Frequency Response: 28Hz-200Hz Vented Enclosure Tuning Frequency: 36Hz Sensitivity 84dB Unique ProLink™ Design  When you’re looking to make a noticeable impact in your sound system, you add a subwoofer that will bring out the low-end bas of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or you can build your bass with Alpine’s new ProLink™ technology.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 6×9” 2-Way Coaxial Speaker The R2-S69 is the 6×9” 2-Way Coax model of the new 2022 R-Series speaker line-up. It features a 16 x 24cm door woofer as well as an integrated tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2166mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent. Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design. Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack. The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3") L x 1165mm (45.9") W x 63mm (2.5") H Weight:5.69 kg (12.5 lbs)

All vehicle based adventures require you to carry valuables. Dont leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft. The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor on both the driver side and the passenger side, yet is still easily accessible. Manufactured with black powder coated 14 gauge, thick steel. Designed and built in South Africa - a country where crime deterrence is an art form.

PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION   Direction-Plus ProVent Ultimate Catch Can kit PV671DPK is designed and engineered in Australia to suit: Ford Next Gen Everest (BF2S 3.0L 6cyl) 2022-On Ford Next Gen Ranger (BF2S 3.0L 6cyl) 2022-On VW Next Gen Amarok NF – (DXWA 3.0L 6cyl) 2023-On The ProVent Ultimate Catch Can kit PV671DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. PROTECTS AGAINST COSTLY REPAIRS AND POOR PERFORMANCE The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. DOESN’T VOID YOUR WARRANTY! If you are wondering about your vehicle’s warranty, you don’t need to worry about it, because this kit doesn’t void any vehicle’s warranties. You can read an article from AAAA about Genuine Parts and Vehicle Warranty HERE. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money *Only in installations where the oil is returned to the sump

The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction-Plus™ ProVent® oil separator kit PV602DPK suits Holden Colorado / Colorado 7 models. The ProVent® oil separator kit PV602DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. HOW IT WORKS Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Front Runner Fridge Slide 80L–90L The Front Runner Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide convenient access to portable fridges, camping equipment, storage boxes, and touring gear. Ideal for 4WDs, canopies, caravans, ute trays, and drawer systems, this low-profile slide maximises accessibility while minimising the space required within your vehicle. Featuring high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, making it easy to access your fridge and equipment without climbing into the vehicle. The rattle-free design and secure swivel latch locking mechanism help keep your cargo stable and secure during travel. Constructed from durable black powder-coated steel and supplied with mounting hardware for wood and metal surfaces, this fridge slide is built to withstand demanding touring, camping, overlanding, and worksite conditions. Features Suitable for 80L–90L portable fridges Heavy-duty 100kg load capacity High-strength bearing drawer slide system Nearly 100% tray extension for easy access Low-profile design maximises storage space Rattle-free operation during travel Secure swivel latch locking system Mounts to most flat surfaces Compatible with Front Runner drawer systems Pre-drilled mounting holes for easy installation Includes mounting hardware for wood and metal surfaces Durable black powder-coated steel construction Specifications Overall / Closed Dimensions: 920mm x 580mm x 65mm Open Dimensions: 1830mm x 580mm x 65mm Internal Dimensions: 880mm x 508mm x 25mm Weight: 16.7kg Maximum Load Capacity: 100kg Material: 1.8mm Black Powder-Coated Steel What's Included 1 x Front Runner Fridge Slide 1 x L-Bracket Latch Bolt Kit Frequently Asked Questions What fridge sizes are suitable for this Front Runner Fridge Slide? This slide is designed to suit many popular portable fridges in the 80L–90L range. Always compare your fridge dimensions with the tray measurements before purchasing. Can this fridge slide be mounted in a canopy, caravan, or ute tray? Yes. The slide can be mounted to most suitable flat surfaces, including canopies, caravans, ute trays, drawer systems, and touring vehicle storage setups. Does the slide lock securely during travel? Yes. The integrated swivel latch locking system and rattle-free design help keep your fridge and equipment secure while travelling on-road and off-road. Note: Fridges and storage containers shown are sold separately.

MSA 4X4’s Tourer Packs are the perfect way to increase storage possibilities during travel while freeing up space inside your vehicle. TP2.1 XLarge Dimensions (cm) 210L x 120W x 30H FEATURES: Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel. 100% breathable and waterproof. YKK Chunky zip with double lockable metal sliders on 3 sides. 50mm Velcro-style dust seal covers the zip 100% Attached 50mm seat belt harness system. Extra 50mm Velcro-style tie-downs Integrated anti-flap design on all harness straps. Heavy-duty 2mm laminated PVC & canvas base for extra protection. Removable rain, dust & scrub resistant cover for extra protection. Supplied with a separate storage bag. Guaranteed not to deteriorate even in extreme weather conditions

The Pedal Torq by Torqit is the original throttle controller, now available for the Landcruiser 70 & 200 Series. This compact unit can be fixed to the driver's dash, providing easy access to adjust settings and improve the vehicle's throttle response. With the Landcruiser 70 & 200 Series Throttle Control, you can experience better performance and more control over your vehicle. Specifications Increased throttle response: The vehicle is faster off the mark, featuring torq it has had a full power upgrade. This makes it ideal for towing and heavy vehicles with excess weight as it removes all sluggish behaviour. Standard vehicles will also drive smoother with instant response. You do not have to pay for fitting, which can be completed in 60 seconds. Package Weight: 0.50 kg

The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker. Installation The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug. Key Features * 5-year warranty * Vehicle-specific software * Dash mount control * 18 settings for driver specific tuning * Utilises all factory plugs, no cutting or rewiring required

The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker. Installation The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug. Key Features * 5-year warranty * Vehicle-specific software * Dash mount control * 18 settings for driver specific tuning * Utilises all factory plugs, no cutting or rewiring required

The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker. Installation The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug. Key Features * 5-year warranty * Vehicle-specific software * Dash mount control * 18 settings for driver specific tuning * Utilises all factory plugs, no cutting or rewiring required