Speakers

The HMX 8 S hi-performance powersport coaxial speakers is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component Powersport coaxial Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in. Frequency response

The HMX 8 S  LD hi-performance powersport coaxial speakers with RGB LEDs lighting option is optimized to perform in infinite baffle, with a solid bass and an outstanding output.  The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection.  The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component POWERSPORTS COAX RGB LED Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in.

The Hertz HD14H Kit is the ultimate solution for upgrading the audio system on your motorcycle. Designed with precision and ease of installation in mind, this kit is perfect for riders who want exceptional sound quality without the hassle. Please note, speakers are not included in this kit. The HD14H Kit includes: Saddlebag Lid: Crafted to seamlessly integrate with your motorcycle’s saddlebags, this lid is engineered to house Hertz 690 NEO.1 speaker. Its sleek and durable design ensures a perfect fit and enhances your bike's aesthetics while delivering a secure and acoustically optimized mounting location. Speaker Harness: This plug-and-play harness makes installation a breeze. It connects directly to your existing audio system, eliminating the need for complex wiring or modifications. Mounting Accessories: The kit comes with everything you need for a professional installation, including a cut-out template, 6x9 inch speaker mounts, speaker grilles, and all necessary mounting hardware.   Why Choose the HD14H Kit? Custom-fit for a clean, professional look Simplifies the upgrade process with easy installation Built to last with high-quality materials Designed to deliver superior sound performance Take your ride to the next level with the Hertz HD14H Kit and enjoy an unparalleled audio experience every time you hit the road. Component Includes HD14 LID KIT and Speaker Harness (Speakers not included)

Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use. Component SPL COAXIAL Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) PEI Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Frequency Response Hz 100 ÷ 20k Woofer Magnet size D x d x h mm (in.) 70 x 45 x 7 (2.76 x 1.77 x 0.28) Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12) Weight of one speaker kg (lb.) 0,94 (2.08) Woofer Magnet Special Neodymium N38 H Tweeter Magnet Special Neodymium N38 H Cone Water repellent pressed paper D mm 128 Re Ohm 3,3 Fs Hz 110 Le mH 0,061 Vas I 4,92 Mms g 10,14 Cms mm/N 0,21 BL T*m 5,83 Qts 0,64 Qes 0,68 Qms 9,7 Spl dB 96,5 A 167,2 mm 6.58 in. B 143,3 mm 5.64 in. C 69,5 mm 2.74 in. D 57,8 mm 2.28 in.

SX 690 H NEO coaxial for 2024 Harley is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.  Component SPL COAXIAL Size mm (in.) in. 6 x 9 Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 25 (1) Frequency Response Hz 65 ÷ 24k Woofer Magnet size D x d x h mm (in.) 110 x 45 x 20 (4.33 x 1.77 x 0.79) Tweeter Magnet size D x h mm (in.) 24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 1,69 (3.73) Woofer Magnet Special Neodymium N38 H Tweeter Magnet Special Neodymium N38 H Cone Water repellent pressed paper Dome Tetolon D mm 169 Xmax mm 5,5 Re Ohm 3 Fs Hz 65 Le mH 0,4 Vas I 11,29 Mms g 36,1 Cms mm/N 0,16 BL T*m 7,665 Qts 0,62 Qes 0,78 Qms 2,9 Spl dB 94 A 237,5 mm 9.35 in. B 225 mm 8.86 in. C 93 mm 3.66 in. D 85 mm 3.35 in. E 163 mm 6.42 in. F 154 mm 6.06 in.

SX 690 NEO.1 is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and a 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on a polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.   The provided MPG 690 grille is made of a high-resistance ABS plastic structure with a metallic finish and a protective metal mesh. Component SPL COAXIAL Size mm (in.) in. 6 x 9 Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 25 (1) Frequency Response Hz 65 ÷ 24k Woofer Magnet size D x d x h mm (in.) 110 x 45 x 20 (4.33 x 1.77 x 0.79) Tweeter Magnet size D x h mm (in.) 24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 1,69 (3.73) Woofer Magnet Special Neodymium N38 H Tweeter Magnet Special Neodymium N38 H Cone Water repellent pressed paper Dome Tetolon D mm 169 Xmax mm 5,5 Re Ohm 3 Fs Hz 65 Le mH 0,4 Vas I 11,29 Mms g 36,1 Cms mm/N 0,16 BL T*m 7,665 Qts 0,62 Qes 0,78 Qms 2,9 Spl dB 94 A 237,5 mm 9.35 in. B 225 mm 8.86 in. C 93 mm 3.66 in. D 85 mm 3.35 in. E 163 mm 6.42 in. F 154 mm 6.06 in.

Two-way system Cento CK 165 features the new C 26 tweeter with a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil, delivering detailed and natural reproduction of medium-high frequencies. The R&D team optimized the C 26 dispersion characteristics to maximize performance at the listening point, ensuring a natural and progressive roll-off with excellent frequency linearity. Extensive research led to the selection of SPP-M (Semi Pressed Paper-Mica) for the C 165 woofer cone, preserving the natural sound of paper while enhancing rigidity through Mica powder. 165 mm (6.5 in.) | System | 285 W | 4 Ohm The result is an excellent balance between lightness and damping for powerful, controlled sound. The oversized ferrite magnet ensures superior control even at higher excursions. The ultra-compact CCX 2 crossover includes tweeter level control (0 / +3 dB) and uses selected components for a full and engaging sound. CG 165 grilles are included, made from high-resistance ABS with metal mesh, offering excellent protection and a refined in-car appearance. Technical Specs Component System Size mm (in.) 165 (6.5) Power Handling – Continuous W 95 Power Handling – Peak W 285 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Sensitivity dB SPL 93 Frequency Response Hz 55 – 22.5k Crossover Cut-off 2.5 kHz @ 12 dB/Oct Crossover Type 2-Way Passive Crossover Woofer Weight kg (lb) 0.96 (2.12) Tweeter Weight kg (lb) 0.03 (0.07) Crossover Weight kg (lb) 0.185 (0.41) Electro-Acoustic Specs D mm 131.5 Re Ohm 3.2 Fs Hz 60 Le mH 0.2 Vas l 13.24 Mms g 13.9 Cms mm/N 0.51 BL T·m 4.9 Qts 0.59 Qes 0.69 Qms 3.9 SPL dB 93   Accessories CPG 165 GRILE- Provided High resistance ABS metal finish grille and removable metallic mesh supplied   Technologies SPP-M (Semi Pressed Paper-Mica) cone enhanced with Mica powder for an excellent balance between lightness and damping.   Features C 26:  1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances. 2. Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range. 3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations. 4. Wide range of accessories, for easy integration in OEM placements. C 165:  1. 165 mm (6.5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper- Mica) enhanced with Mica powder for an excellent balance between lightness and damping. 2. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels. 3. 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high excursion and power handling. 4. Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations. 5. Provided elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh. CCX 2:  1. Tweeter level adjustment through a three-position switch (0, +3 dB) for an optimal tone balance that can be customized by the user. 2. Low-loss factor capacitors and low resistance inductances made with pure copper, for maximum sound transparency and clear high frequencies. 3. Compact design with metallic finish for an easy installation, with air vents for efficient heat dissipation.

The Audison VOCE II AVK 6 P II system is meticulously engineered to deliver dynamic and powerful audio performance. Integrating the AV 1.1 II Hi-Res Tweeter and the robust AV 6.5 P II Mid-Bass Component, this setup offers exceptional power handling up to 150W RMS, thanks to the 40 mm CCAW voice coil. The included AVCX 2P TW passive crossover is crafted from high-quality components, providing extensive tone controls and bi-amplification support for precise sound customization. Installation is facilitated by OEM-style and Faston connectors, making it adaptable to any vehicle setup. Features: AV 1.1 II Hi-Res Audio Certified, Extending Up to 40 kHz: Delivers detailed high-frequency reproduction with improved off-axis response, ensuring exceptional performance even when the tweeter is not directly aligned with the listener, ideal for in-car installations. Tetolon Soft Dome: Optimized through advanced material characterization, laser vibrometer scanning, and simulations, providing a smooth, extended response with warm, natural sound reproduction. 1.1” (28 mm) CCAW Voice Coil: Lightweight and stable, eliminating transient compression and ensuring low distortion for clean, natural sound, even at high SPL levels. Powerful Neodymium Magnet: Designed for superior dynamic response and minimal distortion across the frequency range, enhancing clarity and precision. OEM-style and Faston connectors: Ensures maximum versatility for quick and easy installation in any vehicle, with no additional adapters needed. AIF (Any Install Faceplate) Technology: Offers total installation flexibility and significantly reduces setup time, with two faceplates and three mounting accessories included—perfect for any configuration. Includes two provided adhesive Audison logos, allowing for personalized placement to enhance branding and aesthetics. FEM-Optimized Faceplates: Enhance sound dispersion for a balanced and immersive audio experience from any listening angle. Mesh and Spoke Grilles Included: Both grille options ensure perfect in-car integration, combining aesthetics with performance. eID Technology: Provides traceability from production to owner, guaranteeing authenticity and product security. AV 6.5 P II (40 mm) CCAW Voice Coil (Copper-Clad Aluminum Wire): Maximizes excursion capability and heat dissipation, allowing the driver to handle 150W RMS power, delivering powerful bass without dynamic compression, even at high listening volumes. Low Inductance Design: Optimizes upper midrange (2-3 kHz) reproduction, improving the clarity of vocals and instruments, thanks to an aluminum shorting ring built-in in the motor. Oversized Magnetic Assembly: Provides exceptional thermal stability, ensuring optimal dynamic reserve in any listening condition. FEM-optimized Magnetic Circuit Geometry: Maximizes efficiency by concentrating the magnetic field on the coil for more precise, dynamic sound. Semi-pressed Pulp Cone with Cotton Fibers: Combines rigidity and lightness for wide frequency response and clean reproduction, even in midrange frequencies. Die-Cast Aluminum Basket with Magnet Cover: Enhances heat dissipation and reduces turbulent airflows, ensuring maximum rigidity and high performance, even during prolonged use. High Excursion Butyl Rubber Surround and Optimized Spider: Uses advanced simulations to ensure greater linearity and cone control, reducing distortion during intense excursions. Installation Flexibility: Equipped with OEM-style and Faston connectors, offering maximum installation versatility. Includes two adhesive Audison logo badges, which are provided, allowing for personalized placement to enhance branding and aesthetics. Optional Black or Silver Mesh Metal Grille: Provides robust protection without compromising acoustic performance, adding a touch of elegance to the installation for perfect cabin integration. eID Technology: Ensures product traceability from production to the final owner, guaranteeing authenticity and security. AVCX 2P TW  Bi-Amplification Support: The ability to connect separate amplifiers or channels for the woofer and tweeter, selectable via a high-current switch designed to handle substantial power loads, ensuring optimal performance and flexibility. Mid-Contour Two-Position Control: Provides fine adjustment of the mid-bass frequency response, allowing users to optimize sound output based on the woofer’s placement within the vehicle and individual listening preferences. Hi-Contour Two-Position Control: Enables precise selection of the tweeter’s high-pass crossover point, tailored to its position and angle relative to the listener, ensuring seamless integration and enhanced high-frequency performance. Customizable System Configuration: The combination of Mid-Contour and Hi-Contour controls creates a bespoke two-way system, perfectly balancing the woofer and tweeter, such as pairing the AV 6.5 P II with the AV 1.1 II. Three-Position Tweeter Level Switch: Adjusts the tweeter’s output in 2 dB increments, allowing users to fine-tune sound balance and achieve the desired tonal precision for their listening environment. Hi-Boost Control: Selectable via a dedicated switch, this feature enhances high-frequency linearity above 10kHz, compensating for off-axis tweeter positioning and maintaining a smooth and natural soundstage. High-Quality Capacitors: Equipped with bi-metalized 160V polyester film capacitors featuring ultra-low Dissipation Factor (DF), ensuring exceptional sound transparency and pristine mid/high-frequency reproduction. Air-Wound Inductors: Constructed with pure copper wire up to 1mm ( 0.04 in) in diameter, these inductors provide a high saturation threshold and minimize energy loss, delivering consistent performance in the woofer section during dynamic and high-current demands. Aluminum-housed Resistors: Designed for exceptional thermal stability and acoustic performance, these resistors minimize parasitic inductance, reducing high-frequency losses and ensuring reliable operation even under demanding conditions. Specs Technical Specs LFWoofer Size    165 mm (6.5 in)Impedance    4 OhmPower Handling - Peak    300 WPower Handling - Continuous    150 WFrequency Response    45 - 7500 Hz(-6dB)Voice Coil Diameter    40 mm (1.57 in)Magnet Material    HIGH DENSITY FLUX FERRITEMagnet Size    100 X 45 X 18Cone Material    SEMI-PRESSED PAPERCrossover Type    Two Way Passive Crossover (Woofer Full/6dB Oct., Tweeter - 12dB/Oct.)Crossover Level Adjustment    High Frequency Contour, Mid Frequency Contour, Bi-Amping, Hi Boost, Tweeter Level Technical Specs HFTweeter Size    28 mm (1.1 in)Frequency Response    1000 - 40000 HzComply with HiRes Audio JAS, testing condition IEC 60268-5Power Handling - Peak    180 WHi-Pass filtered @ 1,8 kHz - 12dB Oct.Voice Coil Diameter    28 mm (1.57 in)Dome Material    TETOLON FIBER Electric-acoustic Specs LFRe    2.9 OhmFs    66 HzMms    15.3 gCms    0.28BL    5.5Qms    9Qes    0.61Qts    0.57Vas    9.09 lLe    0.3 mHSpl    91 dBXmax    4.95 mm (0.19 in) Kit Tech DataCrossover Low-Pass    AVCX 2P TW: Woofer, Full/6dB Oct.Crossover Hi-Pass    AVCX 2P TW: Tweeter, 12dB/Oct.Crossover Cut Off    3 kHz (HFC:ON2, MFC:ON, HiBoost:OFF, TW:0dB)Cone Diameter    128.3 mm, 5.05"GeneralWeight Woofer    1.6 kg, 3.53 lbsWeight Tweeter    0.1 kg, .22 lbsWeight Crossover    0.42 kg, .93 lbs

Custom-fit (CF) Speaker System: 2.75" (70 mm) Mid-Tweeter Engineered to deliver amazing sound from factory locations, CF speakers are designed with shallow polymer frames and breakaway mounting tabs for maximum compatibility in today's most popular vehicles, including those from Chevrolet, GMC, Cadillac, Dodge, Jeep, RAM, Toyota and many more.  CF drivers benefit from our proprietary FEA modeling and expertise in loudspeaker design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic low-distortion sound. At the core of the CF-275mt mid-tweeter is a proprietary, 2.75" (70 mm) composite frame and a DMA-optimized motor system. An ultralight, fiber-reinforced pulp cone with a custom "S" roll surround delivers excellent efficiency and extended high-frequency response. A flat, progressive-roll spider ensures linear compliance, while the neodymium motor packs astonishing energy from an ultracompact and lightweight package. Each speaker's glass-filled, high-temperature polymer frame is outfitted with insert-molded terminals and a low-profile perforated metal grille to easily fit behind factory trim while providing excellent UV protection in exposed dashboard locations. For passive applications as midtreble speakers, in-line, second order high-pass filters are included to enhance smoothness and improve power handling. CF-275mt speakers can also be used actively, as true midrange or mid-tweeter drivers to create outstanding two-way or three-way systems. For active applications, we recommend a high-quality digital signal processor (DSP), such as the JL Audio TwK® DSP or a VXi amplifier with built-in DSP, and the recommended bandwidths below. Design Bandwidth:With 24 dB/octave filters: 400 Hz-20 kHzWith 12 dB/octave filters: 500 Hz-20 kHz Enjoy factory-fit and next-level sound from OEM locations with CF speakers! Speakers are sold as a pair and include built-in grilles. General Specifications Continuous Power Handling (RMS) 30 W Recommended Amplifier Power (RMS) 10 - 40 W / Ch. System Efficiency 82.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 450 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter* (A) 2.85 in / 72 mm Grille Tray Outer Diameter (B) N/A Motor Outer Diameter (C) 1.29 in / 33 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion (E) 0.26 / 6.5 mm Mounting Hole Diameter (F) 2.48 in / 63 mm Mounting Depth (G) 1.39 in / 35 mm *Does not take into account mounting tabs

Custom-fit (CF) Speaker System: 3.5" (90 mm) Mid-Tweeter Engineered to deliver amazing sound from factory locations, CF speakers are designed with shallow polymer frames and breakaway mounting tabs for maximum compatibility in today's most popular vehicles, including those from Chevrolet, GMC, Cadillac, Dodge, Jeep, RAM, Toyota and many more.  CF drivers benefit from our proprietary FEA modeling and expertise in loudspeaker design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic low-distortion sound. At the core of the CF-350mt mid-tweeter is a proprietary 3.5" (90 mm) composite frame and a DMA-optimized motor system. An ultralight, fiber-reinforced pulp cone with a custom "S" roll surround delivers excellent efficiency and extended high-frequency response. A flat, progressive-roll spider ensures linear compliance, while the neodymium motor packs astonishing energy from an ultracompact and lightweight package. Each speaker's glass-filled, high-temperature polymer frame is outfitted with insert-molded terminals and a low-profile perforated metal grille to easily fit behind factory trim, while providing excellent UV protection in exposed dashboard locations. For passive applications as midtreble speakers, in-line second order high-pass filters are included to enhance smoothness and improve power handling. CF-350mt speakers can also be used actively as true midrange or mid-tweeter drivers to create outstanding two-way or three-way systems. For active applications, we recommend a high-quality digital signal processor (DSP), such as the JL Audio TwK® DSP or a VXi amplifier with built-in DSP, and the recommended bandwidths below. Design Bandwidth:With 24 dB/octave filters: 400 Hz-20 kHzWith 12 dB/octave filters: 500 Hz-20 kHz  Enjoy factory-fit and next-level sound from OEM locations with CF speakers! Speakers are sold as a pair and include built-in grilles. General Specifications Continuous Power Handling (RMS) 35 W Recommended Amplifier Power (RMS) 10 - 50 W / Ch. System Efficiency 86.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 450 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter* (A) 3.46 in / 88 mm Grille Tray Outer Diameter (B) N/A Motor Outer Diameter (C) 1.29 in / 33 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion (E) 0.26 / 7 mm Mounting Hole Diameter (F) 3.12 in / 80 mm Mounting Depth (G) 1.59 in / 40 mm *Does not take into account mounting tabs

Coaxial Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 1.0-inch (25 mm) Aluminum Dome Tweeter C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 91.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 39 Hz - 22 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter* (A) 6.38 x 9.33 in / 162 x 237 mm Grille Tray Outer Diameter (B) N/A Motor Outer Diameter (C) 3.54 in / 90 mm Frontal Coaxial Tweeter Protrusion** (D) 0.41 in / 10 mm Frontal Grille Protrusion (E) N/A Mounting Hole Diameter (F) N/A Mounting Depth (G) 2.75 in / 70 mm *Does not take into account mounting tabs**Frontal coaxial tweeter protrusion measured from mounting surface

Two-way Component System: 6.5" (165 mm) Woofer, 1" (25 mm) Silk Dome Tweeter   Born from shared technologies used in our flagship C7 speakers, the C6-650 component system combines the smoothness and transparency of a premium silk dome tweeter with a top-flight component woofer to create a loudspeaker system with exceptional refinement and dynamic capability. Benefiting from vast woofer design experience and advanced modeling systems of JL Audio, the 6.5" (165 mm) C6 component woofers feature purpose-engineered, cast alloy frames outfitted with our Elevated Frame Cooling technology. A DMA-optimized, forged and machined motor system generates outstanding midbass impact with ultra-low distortion. The 1" (25 mm) C6 component tweeters feature edge-driven pure silk dome diaphragms for smooth high-frequency performance with remarkable off-axis response and damping. Neodymium motors and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.  Premium passive crossover networks are included with each C6-650 component system. Featuring four levels of tweeter adjustment, these outboard filter networks are equipped with premium polyester film and electrolytic capacitors as well as low-loss air-core inductors — all accessible beneath a protective, polycarbonate cover. Each C6 passive crossover also includes an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure. C6 Woofer Features:• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels• Cast alloy frame with our Elevated Frame Cooling feature• Includes fine mesh grilles C6 Tweeter Features:• Edge-driven pure silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping• Neodymium motor delivers high magnetic flux from a compact motor design• Ferrofluid cooling and damping improves reliability and response smoothness• Includes surface- and flush-mount fixtures Woofer grilles are included, each consisting of a black grille tray and a fine steel mesh grille with an electroformed JL Audio badge logo. Speakers are sold as a pair. General SpecificationsContinuous Power Handling (RMS)    100 WRecommended Amplifier Power (RMS)    25 - 150 W / Ch.System Efficiency    87.37 dB @ 1 W / 1 mSystem Nominal Impedance    4 ΩSystem Frequency Response    53 Hz – 21 KHz ± 3 dB   Woofer Physical Specifications Frame Outer Diameter* (A) 6.50 in / 165 mm Grille Tray Outer Diameter** (B) 6.76 in / 172 mm Motor Outer Diameter (C) 3.54 in / 90 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion*** (E) 1 in / 25 mm Mounting Hole Diameter (F) 5.46 in / 139 mm Mounting Depth (G) 2.60 in / 66 mm *Does not take into account mounting tabs**Does not take into account logo badge***Frontal grille protrusion measured from mounting surface Tweeter Physical Specifications Flush Mount Fixture Diameter (A1) 2.13 in / 54 mm Surface Mount Fixture Diameter (A2) 2.11 in / 54 mm Flush Mount Mounting Hole Diameter (B) 1.85 in / 47 mm Flush Mount Mounting Depth (C) 1.85 in / 47 mm Flush Mount Protrusion (D1) 0.30 in / 8 mm Surface Mount Protrusion (D2) 1.04 in / 26 mm Crossover Physical Specifications Width (W) 3.36 in / 85 mm Height (H) 1.44 in / 37 mm Depth (D) 4.72 in / 120 mm

2-Way Component System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter The C1-650se component system is engineered to deliver remarkable fidelity and outstanding value in a format that easily fits in factory locations. Outfitted with pure, silk dome tweeters, the C1-650se component system stands above others in its category with silky smooth, high-frequency clarity and definition. The 1-inch tweeter’s edge-driven design delivers excellent off-axis response and treble extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. Outboard, 3rd order, high-pass in-line filters, with Advanced Tweeter Protection Circuitry, are also included to guard against high-distortion damage and improve power handling. For maximum installation versatility, surface and flush tweeter mounts are also included.  C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low-distortion sound. At the core of the C1-650 woofer is a proprietary, stamped, steel 6.5-inch (165 mm) frame and DMA-optimized motor system. A mineral-filled, injection-molded, polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to each spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. To maximize fit, multi-application adaptor rings are included for the woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well.  When it comes to value, C1-650se is a real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 50 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 21 KHz ± 3 dB Woofer Physical Specifications Frame Outer Diameter* (A) 6.25 in / 159 mm Grille Tray Outer Diameter (B) 6.84 in / 174 mm Motor Outer Diameter (C) 3.15 in / 80 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion** (E) N/A Mounting Hole Diameter (F) 5.02 in / 128 mm Mounting Depth (G) 2.07 in / 53 mm *Does not take into account mounting tabs**Frontal grille protrusion measured from mounting surface Tweeter Physical Specifications Flush Mount Fixture Diameter (A1) 1.97 in / 50 mm Surface Mount Fixture Diameter (A2) 2.01 in / 51 mm Flush Mount Mounting Hole Diameter (B) 1.75 in / 45 mm Flush Mount Mounting Depth (C) 0.40 in / 10 mm Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm Surface Mount Tweeter Frontal Protrusion (D2) 0.87 in / 22 mm

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB

C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer adaptor rings are included allowing the C1-690tx to be installed in bottom-mount applications. C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690tx are a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the backplate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with dual true, edge-driven, aluminium dome tweeters, the C1-690tx stands apart from others in its category with superior high-frequency clarity and separation. The design of each tweeter delivers inherently excellent off-axis response and high-frequency extension. Both high-frequency drivers also benefit from the damping of a silk surround suspensions and Ferrofluid in the voice coil gaps, along with the superior strength of neodymium magnetics. A true, mixed order filter network is employed to further enhance smoothness and improve power handling. GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 60 W Peak Music Power: 225 W Recommended Amplifier Power (RMS): 10 – 100 W / Ch. System Efficiency: 90.5 dB @ 1 W / 1 m System Nominal Impedance: 4 Ω System Frequency Response: 36 Hz – 24 kHz ± 3 dB Frame Outer Diameter* (A): 6.38 x 9.33 in / 162 x 237 mm Grille Tray Outer Diameter (B): N/A Motor Outer Diameter (C): 3.94 in / 100 mm Frontal Coaxial Tweeter Protrusion** (D): 0.72 in / 18 mm Frontal Grille Protrusion (E): N/A Mounting Hole Diameter (F): N/A Mounting Depth (G): 3.09 in / 79 mm *Does not take into account mounting tabs **Frontal coaxial tweeter protrusion measured from the mounting surface

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-400x system features 4-inch (100 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. Breakaway mounting tabs on the woofer frame allow the C2-400x to be installed in four-hole or two-hole configurations. Injection-moulded adaptor plates are also included to allow mounting of the C2-400x speakers into a 4 x 6 (100 x 150 mm) speaker location. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Speaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 35 W Peak Music Power 105 W Recommended Amplifier Power (RMS) 10 - 50 W / Ch. System Efficiency 84.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 71 Hz - 22 KHz ± 3 dB

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-525x system features 5.25-inch (130 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Speaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 89.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 63 Hz - 22 KHz ± 3 dB

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. Many people mistakenly believe that an oval speaker cannot perform as well as around one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems. The C2-570x system features 5 x 7 / 6 x 8-inch (125 x 180 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Grilles are not available for this speaker system. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-600x system features 6-inch (150 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The 6-inch (150 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair.

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-650x system features 6.5-inch (165 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 91 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB