AP 6.5P woofer component has been designed to perform at its best in OEM placements, combining excellent power handling and efficiency featuring a very wide excursion to cope with the most important dynamic peaks without any compression. Its impressive magnetic assembly provides the energy needed for perfect control even during limit excursions. The CCAW (Copper Clad Aluminium Wire) voice coil (32 x 14 mm, 1.25 x 0.55 in) optimally manages the greater applied power. The basket was completely redesigned with the aid of simulations to lower the resistance of air flows, while maintaining compact sizes to facilitate the installation. Technical Specs Nominal diameter 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 330 W Power Handling - Continuous 110 W Sensitivity 92.5 dB Frequency Response 50 - 5k Hz Voice Coil Ø 32 mm Magnet size D x d x h 100 x 40 x 18 mm (3.94 x 1.57 x 0.71 in) Voice Coil Material CCAW Cone Material WATER-REPELLENT TREATED PAPER CONE Xmax 5.6 mm (0.22 in) Electric-acoustic Specs Re 3.1 Ohm Fs 60 Hz Le 0.29 mH Vas 11.4 l (0.403 ft) Mms 14.6 g (0.515 oz) Cms 0.47 mm/N BL 5.35 T•m Qts 0.55 Qes 0,6 Qms 7.6 General Weight 1.45 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 141 mm (5.55 in) Dimension C 75 mm (2.95 in) Dimension D 66.5 mm (2.62 in)

AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don't employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R & amp;D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs Nominal diameter 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 210 W Power Handling - Continuous 70 W Sensitivity 93.5 dB Frequency Response 60 ÷ 5k Hz Voice Coil Ø 32 mm Magnet size D x d x h 85 x 40 x 15 mm (3.35 x 1.57 x 0.59 in) Xmax 2.5 mm (0.1 in) Electric-acoustic Specs Re 3.1 Ohm Fs 80 Hz Le 0.23 mH Vas 7.6 l (0.268 ft) Mms 12 g (0.423 oz) Cms 0.31 mm/N BL 4.7 T•m Qts 0.7 Qes 0,8 Qms 4.7 General Weight 0.78 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 141 mm (5.55 in) Dimension C 60 mm (2.36 in) Dimension D 56 mm (2.2 in)

APK 690 - KIT 2Way AP 1+AP 690+XOVERAPK 690 systems are ideal for car models with doors equipped to house elliptical speakers, featuring 6×9 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 690. The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation. The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.Tweeter -• 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.• Acoustic lens designed to compensate for the in-car frequency response in the 10kHz - 13kHz bandwidth caused by critical OEM placements.Woofer -• 25 mm pure copper voice coil, for high power handling and outstanding low frequency control.• Water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.• Reduced mounting depth, providing ease of installation in OEM placements.• “Triple Wave” surround profile for maximum excursion linearity.• Compact basket, protected by abrasion-resistant and scratchproof coating, the motor affixed with damping epoxy adhesive.• High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. Attribute Details Brand Audison Condition NEW Type Component Fitment Size 6x9 Component Set with 1in Tweeter Power Handling (RMS / Continuous) 100W Power Handling (Peak) 300W RMS Wattage Per Speaker 250 Impedance 4 Ohms Frequency Response 40 – 20k Hz Sensitivity 95 dB/SPL Manufacturer SKU 69051090 UPC 8018823129695 ASIN B07V7FRS4P Bundle No Shipping Free 2-Day Shipping Weight 6.39 lbs

APK 570 systems is ideal for car models with doors equipped to house elliptical speakers featuring 5×7 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 570.The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier.The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients.The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact. Specs Comp 2 way System Size 5 x 7 in. Woofer 26 mm (1 in.) Tweeter 46,5 x 37,5 x 20,1 mm (1.83 x 1.47 x 0.8 in.) Crossover Power Handling 100 W Continuous Power 300 W Peak Power Impedance 4 Ω Frequency Response 55 – 20k Hz Sensitivity 93,5 dB/Spl

APK 163 Tree way system features AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer.APK 163 system deserves special attention; the Audison designers developed a separate crossover dedicated to each speaker, simplifying OEM speaker replacement operation, negating the routing of additional cables through the door, which could void the car warranty. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection. Technical Data Comp 3 way System Size 165 mm (6.5″) Woofer100 mm (4″) Midbass26 mm (1″) Tweeter46,5 x 37,5 x 20,1 mm (1.83″ x 1.47″ x 0.8″) APCX TW Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX MD Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX WF Crossover Power Handling 125 W Continuous Power375 W Peak Power Impedance 4 Ω Frequency Response 50 – 20k Hz Sensitivity 93,5 dB/Spl Technical Specifications Specification Details Woofer Size 165 mm (6.5 in.) Midbass Size 100 mm (4 in.) Tweeter Size 26 mm (1 in.) Power Handling (Peak) 375 Watts Power Handling (Continuous) 125 Watts Impedance 4 Ohm Frequency Response 50 Hz – 20 kHz Crossover Type LP @ 600 Hz – 6 dB/OctHP @ 600 Hz / 3.5 kHz – 6/6 dB/OctHP @ 3.5 kHz – 6 dB/Oct Component Adjustment 0 to +2 dB Magnet Size Component Magnet Size (mm) D × H (in.) Woofer 85 × 40 × 15 3.35 × 1.57 × 0.59 Midrange 70 × 32 × 10 2.75 × 1.26 × 0.39 Tweeter 19 × 13 0.75 × 0.12 Weight (per speaker) Component Weight kg (lb) Woofer 0.78 kg (1.72 lb) Midbass 0.40 kg (0.88 lb) Tweeter 0.04 kg (0.09 lb) Voice Coil Diameter Component Ø mm (in.) Woofer 32 mm (1.26 in.) Midbass 25 mm (1 in.) Tweeter 20 mm (0.8 in.)

The two-way APBMW K4M kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin. Technical Specs LF Woofer Size 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 100 W Power Handling - Continuous 50 W Voice Coil Diameter 25 mm (0.98 in) Magnet Size 50 x 29 x 3 Crossover Type 89 Crossover Type Hi-Pass: 6 KHz @ 6dB/Oct. Crossover Level Adjustment -3; 0 Technical Specs HF Tweeter Size 29 mm (1.14 in) Voice Coil Diameter 25 mm (0.98 in) Electric-acoustic Specs LF Re 3.3 Ohm Fs 90 Hz Mms 6.4 g Cms 0.5 BL 4.8 Qms 8.9 Qts 0.48 Vas 1.8 l Le 0.32 mH Spl 88 dB Xmax 0.5 mm (0.02 in) Kit Tech Data Cone Diameter 80 mm General Weight Woofer 0.426 kg Weight Tweeter 0.06 kg

The two-way APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin. Technical Specs LF Woofer Size 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 100 W Power Handling - Continuous 50 W Frequency Response 90 ÷ 23k Voice Coil Diameter 25 mm (0.98 in) Magnet Size 50 x 29 x 3 Crossover Level Adjustment -3; 0 Technical Specs HF Tweeter Size 29 mm (1.14 in) Voice Coil Diameter 25 mm (0.98 in) Electric-acoustic Specs LF Re 3.3 Ohm Fs 90 Hz Mms 6.3 g Cms 0.5 BL 4.8 Qms 8.2 Qts 0.48 Vas 1.8 l Le 0.32 mH Spl 88 dB Xmax 0.5 mm (0.02 in) Kit Tech Data Crossover Low-Pass Hi-Pass: 6 KHz @ 6dB/Oct. Cone Diameter 80 mm General Weight Woofer 0.46 kg Weight Tweeter 0.06 kg

The new HMS 12 marine sport grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The sport grille, featuring built-in LEDs, can be easily and painted the perfect color for your vessel.  The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion.  Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion! Size mm (in.) 300 (12) Power Handling - Continuous W 500 Power Handling - Peak W 1000 Impedance Ohm 2 Depth mm (in.) 191 (7.52) Voice Coil Type single No Filter Component 2Ω SPORT LED SUBWOOFER Voice Coil Ø 65.5 (2.6) Magnet size D x d x h mm (in.) 156 x 80 x 40 (6.14 x 3.15 x 1.57) Weight of one component kg (lb.) 7,6 (16.8) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors D mm 265 Xmax mm 19 Re Ohm 1.8 Fs Hz 30 Le mH 0.41 Vas I 95.4 Mms g 114 Cms mm/N 0.225 BL T*m 8 Qts 1 Qes 1.1 Qms 11.1 Spl dB 89.5 A 342.9 mm 13.5 in. B 279.4 mm 11 in. C 192.8 mm 7.59 in. D 140.6 mm 5.54 in. F 52.2 mm 2.06 in. Frequency response

The new HMS 12 marine classic charcoal grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The classi grille, features built-in LEDs. Can be easily and painted the perfect color for your vessel.  The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion.  Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion! Size mm (in.) 300 (12) Power Handling - Continuous W 500 Power Handling - Peak W 1000 Impedance Ohm 2 Depth mm (in.) 191 (7.52) Voice Coil Type single No Filter Component 2Ω INFINITE BAFFLE LED SUBWOOFER Voice Coil Ø 65.5 (2.6) Magnet size D x d x h mm (in.) 156 x 80 x 40 (6.14 x 3.15 x 1.57) Weight of one component kg (lb.) 7,6 (16.8) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors D mm 265 Xmax mm 19 Re Ohm 1.8 Fs Hz 30 Le mH 0.41 Vas I 95.4 Mms g 114 Cms mm/N 0.225 BL T*m 8 Qts 1 Qes 1.1 Qms 11.1 Spl dB 89.5 A 342.9 mm 13.5 in. B 279.4 mm 11 in. C 192.8 mm 7.59 in. D 140.6 mm 5.54 in. F 52.2 mm 2.06 in. Frequency response

Sport grille, featuring built-in LEDs, can be easily removed to be painted with the perfect color for your vessel. HMS subwoofers are designed to be installed without the need for a dedicated enclosure delivering powerful and precise bass in any vessel.  The motor and suspension design are optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low-distortion.  Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, maximizing the overall system performance, for unlimited sound pressure and emotion!  Size mm (in.) 250 (10) Power Handling - Continuous W 300 Power Handling - Peak W 600 Impedance Ohm 2 Depth mm (in.) 116 (4.56) No Filter Component 2Ω SPORT LED SUBWOOFER Voice Coil Ø 50 (2) Magnet size D x d x h mm (in.) 140 x 60 x 30 (5.51 x 2.36 x 1.18) Weight of one component kg (lb.) 5,1 (11.24) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors Xmech mm (in.) ±16,3 (0.64) D mm 210 Xmax mm 12,3 Re Ohm 2,1 Fs Hz 43 Le mH 0,46 Vas I 30,46 Mms g 75,6 Cms mm/N 0,18 BL T*m 8,3 Qts 0,60 Qes 0,63 Qms 12,3 Spl dB 88,5 A 280 mm 11 in. B 227 mm 8.93 in. C 164 mm 6.45 in. D 116 mm 4.56 in. F 48 mm 1.88 in.

The HMS 10 B-C 10” long-throw marine subwoofer is designed for infinite baffle applications. Its 2-ohm configuration maximizes amplifier power, relieving the main speakers from reproducing low frequencies while adding deep bass output and impact to enhance overall system performance. The HMS 10 B-C features an optimized high-excursion motor assembly with a 50 mm (2”) voice coil, driven by a large magnetic structure to maintain precise control even at very high SPL levels. Engineered and tested for real-world marine conditions—including UV exposure, salt fog, vibration, water spray, thermal shock, and dust—the HMS 10 B-C is built to withstand harsh environments. A progressive aramid fiber spider with silicone-insulated lead wires ensures long-term durability and consistent performance. Corrosion-resistant gold-plated brass terminals with a protective silicone cap safeguard the wire connection point for reliable operation over time. Size mm (in.) 250 (10) Power Handling - Continuous W 250 Power Handling - Peak W 500 Impedance Ohm 2 Depth mm (in.) 191 (7.52) Voice Coil Type single No Filter Component 2Ω SUBWOOFER Voice Coil Ø 50 (2) Magnet size D x d x h mm (in.) 140 x 60 x 30 (5.51 x 2.36 x 1.18) Weight of one component kg (lb.) 5,1 (11.24) Magnet Ferrite Cone Polypropylene with UV inhibitors Xmech mm (in.) ±16,3 (0.64) D mm 210 Xmax mm 12,3 Re Ohm 2,1 Fs Hz 43 Le mH 0.46 Vas I 30,46 Mms g 75.6 Cms mm/N 0.18 BL T*m 8.3 Qts 0,6 Qes 0,63 Qms 12,3 Spl dB 88,5 Physical Specs A 277 mm 10.91 in. B 230 mm 9.06 in. C 191 mm 7.52 in. D 145 mm 5.71 in. F 46 mm 1.81 in.

Hertz HMS 10 B-C The HMS 10 B long throw 10” marine subwoofer, also available in the black option HMS 10 B-C, is engineered for infinite baffle application. It relieves the main speakers from the hard work of reproducing the lowest frequency range, adding bass output and punch to maximize the overall system performance. The FEM optimized high-excursion mobile equipment of HMS 10 B with a 50 mm (2”) voice coil is driven by a massive magnetic group, to obtain a perfect control also at very high-level SPL. Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust) HMS 10 B is nature-proof. The progressive design aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The gold-plated corrosion resistant brass connection terminals with silicone cap protect the lead wire junction point. Product Details: 10" Single 4 ohm Hertz Marine (HMS) Series Subwoofer Power Handling: Peak: 500 watts RMS: 250 watts IP65 waterjet tested certification UV-resistant and salt-fog tested Polypropylene cone with UV inhibitors Co-molded Santoprene Rubber surround Progressive-design aramid fiber spider Silicone-insulated lead wires construction FEM optimized high-excursion mobile equipment Marine-grade polymer injected basket Gold-plated corrosion-resistant brass terminals with silicone cap 2" Copper voice coil 13.5 mm Xmax Single Stacked Ferrite magnet motor structure Resonance Frequency (Fs): 41 Hz Sensitivity: 88 dB Engineered for infinite baffle application Recommended sealed box volume: 1.77 cubic feet Top-mount depth: 5.71" Cutout diameter: 9.06" Includes protective subwoofer grille 1-year Manufacturer's Warranty

The HMS 10 B  long throw 10” marine subwoofer, also available in the black option HMS 10 B-C, is engineered for infinite baffle application. It relieves the main speakers from the hard work of reproducing the lowest frequency range, adding bass output and punch to maximize the overall system performance. The FEM optimized high-excursion mobile equipment of HMS 10 B with a 50 mm (2”) voice coil is driven by a massive magnetic group, to obtain a perfect control also at very high level SPL. Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust ) HMS 10 B4-LD-W is nature-proof. The progressive design aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The gold-plated corrosion resistant brass connection terminals with silicone cap protect the leadwire junction point. Size mm (in.) 250 (10) Power Handling - Continuous W 300 Power Handling - Peak W 600 Impedance Ohm 4 Depth mm (in.) 116 (4.56) Voice Coil Type single No Filter Component SUBWOOFER Voice Coil Ø 50 (2) Magnet size D x d x h mm (in.) 140 x 60 x 30 (5.51 x 2.36 x 1.18) Weight of one component kg (lb.) 5,1 (11.24) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors Xmech mm (in.) ±19 (0.75) D mm 210 Xmax mm 13.5 Re Ohm 4.5 Fs Hz 41 Le mH 0.9 Vas I 37 Mms g 69 Cms mm/N 0.22 BL T*m 10.2 Qts 0.71 Qes 0.76 Qms 11 Spl dB 88 A 280 mm 11 in. B 227 mm 8.93 in. C 165 mm 6.5 in. D 116 mm 4.56 in. F 48 mm 1.88 in. Frequency response

Product Details: 10" Single 2 ohm Hertz Marine (HMS) Series Subwoofer Power Handling: Peak: 500 watts RMS: 250 watts IP65 waterjet tested certification UV-resistant and salt-fog tested Polypropylene cone with UV inhibitors Co-molded Santoprene Rubber surround Progressive-design aramid fiber spider Silicone-insulated lead wires construction FEM optimized high-excursion mobile equipment Marine-grade polymer injected basket Gold-plated corrosion-resistant brass terminals with silicone cap 2" Aluminum voice coil 12.3 mm Xmax Single Stacked Ferrite magnet motor structure Resonance Frequency (Fs): 43 Hz Sensitivity: 88.5 dB Engineered for infinite baffle application Recommended sealed box volume: 1.77 cubic feet Top-mount depth: 5.71" Cutout diameter: 9.06" Includes protective subwoofer grille 1-year Manufacturer's Warranty

Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting. The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released. This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps. 1. Hertz Pure Marine Certified Product stamp featuring the IP65 protection grade, ASTM-D4329 standards for UV resistance and ASTM-B117 for salt fog operability. 2. Equipped with dedicated 8” coaxial speaker featuring a long-throw 32 mm (1.26”) voice coil woofer with polypropylene cone injected with UV inhibitors and 1.4” Neodymium magnet tweeter. 3. RGB led lighting creates sophisticated atmosphere, adding tons of class to your vessel. Front RGB lighting is included built-in the front grille, while rear RGB lighting is an add-on with the specifically developed HTX RGB LOGO.1 accessory (available both in black and white color). 4. Q-OS² (Quick Orientation & Release for Sound & Safety) technology. - Durability thanks to the solid 316 Stainless Steel construction; - Tower can be quickly oriented within 18 steps (20° each) along horizontal axis for best sound projection and diffusion over the listening area; - Quick Mechanical/Electrical release for security/anti-theft and cleaning; - Multi-pole high current connection self-contained into the clamp structure; - Clamp structure includes rubber inserts for vibrations damping and fits both round roll-bar [38 mm, 76 mm (1-1/2” to 3”)] and square roll-bar or roof mounting by detaching clamp basement upper part. Optional fitting accessories available for major OEM brands. 5. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.

Order a Quantity of 2 for a Pair, this is sold as 1 Speaker per Package   HTX 8 M-CL-W Marine Tower Coaxial Speaker (white) Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting. The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released. This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps. Features SALT FOG TESTED To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.  WATER JET TESTED The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment. UV RESISTANT According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea. Specifications Power Handling - Peak W 200 Power Handling - Continuous W 100 Impedance Ω 4 Frequency response Hz 45 ÷ 25k Sensitivity dB SPL 91 Woofer size mm (in.) 200 (8) Tweeter size mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet High density flux ferrite Tweeter magnet Neodymium Woofer cone Polypropylene with UV inhibitors Tweeter dome PEI

HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC,  features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.4) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 Physical Specs A 225 mm 8.86 in B 180 mm 7.09 in C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in

Hertz HMX 8 TC 8-inch Hi-End Marine Coaxial Speakers in Black (Pair) HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Key Features IP 65 Certification Water Jet TestedThe protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment. UV ResistantAccording to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea. Salt Fog TestedTo satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent. Features Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust). 1.4” Neodymium magnet tweeter featuring a PEI material dome combined with faceplate and acoustic lens optimized for best off-axis dispersion and highest SPL. Sound-transparent tone-on-tone stainless steel tweeter mesh grille providing efficient high-frequency transfer, attractive look and a rock-solid protection. Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle application featuring polypropylene cone injected with UV inhibitors and co-molded Santoprene surround. Aramid fiber spider with silicone-insulated lead wires ensuring durability and constant performance over time. FEM optimized high-excursion mobile equipment driven by a massive magnetic group encapsulated into a marine-grade polymer injected basket. Sealed built-in crossover with resettable solid-state tweeter protection circuit. Gold-plated corrosion resistant terminals.

HMX 8 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 128.6 mm 5.06 in D 91 mm 3.58 in. F 37.6 mm 1.48 in.

HMX 8  S-LD-G marine coaxial speaker features a sports paintable grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 128.6 mm 5.06 in D 91 mm 3.58 in. F 37.6 mm 1.48 in.