Front Runner
FRONT RUNNER Toyota Tacoma 3Rd Gen (2015-2023) Cab Over Camper Slimline Ii Roof Rack Kit - KRTT011T
$782.10
$869.00
Get your Toyota Tacoma ready for cargo-carrying duties and adventures with this modular and lightweight roof rack. The kit consists of Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the tray to your Tacoma. The rack is compatible with over 55 accessories tailored to various sports, camping and overland gear.
This 550mm/21.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tacoma. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
KRTT011T - Toyota Tacoma 3rd Gen (2015-2023) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FATT011 - Toyota Tacoma 3rd Gen (2015-2023) Contour Rails
1x RRSTD03 - SLII Tray - 1255mm(W)X550mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 12.47kg (27.49lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 18kg (40lbs)
Front Runner
FRONT RUNNER Volkswagen Amarok (2010-2022) Slimline Ii Roof Rack Kit - KRVA003T
$1,426.50
$1,585.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Amarok. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FAVA001 - Volkswagen Amarok Foot Rails - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
Front Runner
FRONT RUNNER Volkswagen T2 Transporter/Kombi Slimline Ii Roof Rack Kit / Tall - KRVK009T
$2,849.40
$3,166.00
This 2772mm/109.1" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T2 Kombi contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS110 - No 10 Leg 280mm (Pair)1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 50.76kg (111.9lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Weight: 450mm (18")Length: 1720mm (68")Height: 290mm (11")Shipping Weight:Weight: 50.8kg (112lbs)
Front Runner
FRONT RUNNER Volkswagen T3 Transporter/Kombi Slimline Ii Roof Rack Kit / Tall - KRVKT01L
$2,763.00
$3,070.00
This 2772mm/109.1" long full-size Slimline II cargo carrying roof rack kit for your Volkswagen T3 Transporter/Kombi contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 42kg (92lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 48.8kg (107.3lbs)
Front Runner
FRONT RUNNER Volkswagen T4 Transporter (1990-2003) Slimline Ii Roof Rack Kit - KRVT011T
$2,698.20
$2,998.00
This 2772mm/109.1" long full-size Slimline II cargo carrying roof rack kit for the Volkswagen T4 Transporter (1990-2003) contains Slimline II Tray, Wind Deflector, 2 Tracks and 8 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
For further information on installation, please see the fitment instructions in the INSTALL tab.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x FASS024 - Foot Set / 50mm-60mm - by Front Runner2 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRAC905 - Volkswagen T4 Transporter RR Installation Kit1 x RRSTD14 - Slimline II Tray - 1255mm(W) X 2772mm(L) - by Front Runner2 x TRAC002 - Universal Track / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 40kg (88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 455mm (18")Length 1610mm (63")Height 285mm (11")
Shipping Weight:
Weight 46.6kg (102.5lbs)
Front Runner
FRONT RUNNER Volkswagen T5 Transporter Lwb (2003-2015) Slimline Ii 1/2 Roof Rack Kit - KRVK007T
$1,750.50
$1,945.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your 2003-2015 Volkswagen T5. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT002 - Volkswagen T5 Caravelle/Transporter LWB FR1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 36.33kg (80.09lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 36.21kg (80lbs)
Front Runner
FRONT RUNNER Volkswagen T5 Transporter Lwb (2003-2015) Slimline Ii Roof Rack Kit - KRVK006T
$2,717.10
$3,019.00
This 2772mm/109.1" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2003-2015 Volkswagen T5 LWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT002 - Volkswagen T5 Caravelle/Transporter LWB FR1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 52.47kg (115.68lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 620mm (24")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 52.02kg (114lbs)
Front Runner
FRONT RUNNER Volkswagen T5/T6 Transporter Swb W/Oem Tracks (2003-Current) Slimline Ii Roof Rack Kit - KRVT014T
$2,332.80
$2,592.00
This 2570mm/101.2" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T5/T6 SWB Transporter contains a Slimline II Tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x FASS028 - Foot Set / 85mm-95mm1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.69kg (87.5lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1720mm (68")Height: 180mm (7")Shipping Weight:Weight: 37.6kg (83lbs)
Front Runner
FRONT RUNNER Volkswagen T6/T6.1 Caravelle Transporter Swb (2015-Current) Slimline Ii 1/2 Roof Rack Kit - KRVT016T
$1,543.50
$1,715.00
Not every adventure requires a full-size rack. Free up space in your Volkswagen T6/T6.1 Caravelle Transporter SWB with this half-sized Slimline II Roof Rack Kit. The Slimline II’s lightweight, modular construction allows you to customize your setup with over 55 accessories. The kit features a Slimline II Tray, Wind Deflector, and 2 Foot Rails and installs directly onto your Caravelle’s existing factory mounting points.
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T6/T6.1. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT003 - Volkswagen T6/T6.1 Caravelle/Transporter FootRails1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.03kg (72.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 250mm (10")Shipping Weight:Weight: 33kg (73lbs)
Front Runner
FRONT RUNNER Volkswagen T6/T6.1 Caravelle Transporter Swb (2015-Current) Slimline Ii Roof Rack Kit - KRVT017T
$2,524.50
$2,805.00
Free up space in your Volkswagen T6/T6.1 Caravelle Transporter SWB with this Slimline II Roof Rack Kit. The Slimline II’s lightweight, modular construction allows you to customize your setup with over 55 accessories so that you can gear up for any adventure. This particular cargo roof rack kit contains the full-size Slimline II Tray, Wind Deflector and 2 Foot Rails.
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T6/T6.1 Transporter. It easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT003 - Volkswagen T6/T6.1 Caravelle/Transporter FootRails1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 49.2kg (108.47lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 49kg (108lbs)
Front Runner
FRONT RUNNER Volkswagen T6/T6.1 Caravelle/Transporter Lwb (2015-Current) Slimline Ii 1/2 Roof Rack Kit - KRVT018T
$1,763.10
$1,959.00
Not every adventure requires a full-size rack. Free up space in your Volkswagen T6/T6.1 Caravelle/Transporter LWB (2015-Current) with this half-sized Slimline II Roof Rack Kit. The Slimline II’s modular construction allows to gear up for any adventure with a variety of accessories, such as under-rack mounted tables. This kit features a Slimline II Tray, Wind Deflector, and 2 Foot Rails and installs directly onto your Caravelle or Transporter’s factory mounting points.
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T6/T6.1. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT004 - Volkswagen T6/T6.1 Caravelle/Transporter LWB FR1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.4kg (82.45lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 38kg (84lbs)
Front Runner
FRONT RUNNER Toyota Hilux (2015-Current) Slimsport Roof Rack Kit - KSTH005T
$988.20
$1,098.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1386mm (54.6") x 1147mm (45.2").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182) for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Hilux H48 DC (2015-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack (RRAC213) is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KSTH002 - Toyota Hilux (2015-Curr) SlimSport Roof Rack Kit1x RRAC244 - Toyota Hilux H48(2015-Curr)SsportRack Wind Fairing1x RRAC971 - Protection Strip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions: 1386mm (54.6") L x 1147mm (45.2") W x 116mm (4.6") H
Approximate Installed Weight: 24.352537kg (53.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 160mm (06")
Shipping Weight:Weight: 25kg (55lbs)
Front Runner
FRONT RUNNER Toyota Hilux (2015-Current) Slimsport Roof Rack Kit Lightbar Ready - KSTH004T
$988.20
$1,098.00
This low-profile flat deck Slimsport rack has a load carrying area of 1386mm (54.6") x 1147mm (45.2").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included in the Toyota Hilux DC Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTH004T - Toyota Hilux (2015-Current) Slimsport Roof Rack Kit Lightbar ready - by Front Runner
Consisting of:
1x KSTH002 - Toyota Hilux (2022-Curr) SlimSport Roof Rack Kit
1x RRAC245 - Toyota Hilux Slimsport Rack 40" L Bar Wind Fairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.352537kg (53.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 160mm (06")
Shipping Weight:
Weight: 25kg (55lbs)
Front Runner
FRONT RUNNER Toyota Hilux N50/N60/N70 4Th Gen (1984-1988) Slimline Ii Roof Rack Kit - KRTH001L
$1,350.00
$1,500.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Hilux (1984-1988) contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTH001L - Toyota Hilux N50/N60/N70 4th Gen (1984-1988) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x LASS102 - No 2 Leg 130mm (Pair)
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 25.51kg (56.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 25.93kg (57lbs)
Front Runner
FRONT RUNNER Toyota Hilux Revo Dc (2016-2021) Slimline Ii Roof Rack Kit / Low Profile - KRTH012T
$1,430.10
$1,589.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo 2016+. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTH012T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATH003 - Toyota Hilux Revo DC(2016-Current) Foot Rails/Low1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.28kg (62.35lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 28.57kg (63lbs)
Front Runner
FRONT RUNNER Toyota Hilux Revo Extended Cab (2016-Current) Slimline Ii Roof Rack Kit / Low Profile - KRTH022T
$1,069.20
$1,188.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTH022T - Toyota Hilux Revo Extended Cab (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATH006 - Toyota Hilux Revo ExCab(2016-Curr) Foot Rails/Low1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.78kg (45.81lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 275mm (11")
Shipping Weight:
Weight: 23kg (51lbs)
Front Runner
FRONT RUNNER Volkswagen Multivan (T7) Swb (2022-Current) Slimline Ii Roof Rack Kit - KRVT021T
$2,423.70
$2,693.00
This 2368mm/93.22" long, full-size Slimline II cargo-carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T7 Caravelle/Transporter SWB. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVT021T - Volkswagen T7 Caravelle Transporter SWB (2022-Current) Slimline II Roof Rack Kit
Consisting of:
1x FAVT006 - Volkswagen T7 Caravelle/Transporter SWB (22-Curr) Foot Rails
1x RRSTG12 - SLII Tray - 1345mm(W)X2368mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.51kg (91.51lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 46kg (101lbs)
Front Runner
FRONT RUNNER Toyota Hilux Revo Dc (2016-Current) Track And Feet Slimline Ii Roof Rack Kit - KRTH020T
$1,416.60
$1,574.00
This kit consists of two (4) x Tent Brackets
Works with both Front Runner Roof Racks and Front Runner Load Bars and fits a wide variety of hard shell tents including various ranges from James Baroud and Autohome.
These brackets let you mount your James Baroud or Autohome tents with the proper lateral support, even if your rack is narrower or wider than your tent base.
When fitting a James Baroud or Autohome tent to a rack that is smaller (narrower, shorter or both) than your tent base footprint, the included spacer raises the mounting height of the tent so it rests on the edge of the racks side profiles for full support.
When mounted to a rack that is larger (longer and wider) than your tent base footprint, the brackets position your tent flush on the rack for full support and use of the included spacer isnt required.
Supplied with all installation hardware and fitting instructions.
Features
Consists of:
4 x Tent Brackets
4 x James Baroud Channel Plates
4 x Auto Home Channel Plates
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions: (Per Bracket)
140mm (5.5") L x 23.5mm (0.9") W x 81mm (3.2") H
Weight: (Per Pair of Brackets)
1.6kg (3.5lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Fits Suzuki Jimny 2018-On - KRSJ003T
$1,421.10
$1,579.00
This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 2018+ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Note: This Suzuki Jimny Kit requires the use of the supplied 20mm Lip Wind Deflector.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ003T - Suzuki Jimny (2018-Current) Slimline II Roof Rack
Consisting of:
3x LASS102 - No 2 Leg 130mm (Pair)
1x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.98kg (68.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 31.5kg (69lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota 4Runner 4Th Gen - KRTF051T
$1,741.50
$1,935.00
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (4th Gen). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF051T - Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF003 - Toyota 4runner (2002-2008) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 30kg (65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 34.4kg (75.7lbs)
Front Runner
FRONT RUNNER Slimsport Roof Rack Kit Fits Toyota 4Runner 5Th Gen 2010-On - KSTF003T
$1,445.40
$1,606.00
This low profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") L x 1181mm (46.5").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota 4Runner (2009-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTF003T - Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit
1 x RRAC234 - TOYOTA4RUNNER SLIMSPORT RACK WIND FAIRING
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (81.57lbs)
Assembled Rack Kit Dimensions:
2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Condor - KRTC001L
$1,766.70
$1,963.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Condor contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTC001L - Toyota Condor Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.9kg (72.4lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Vw T3 Transporter/Kombi - KRVK001L
$2,741.40
$3,046.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for your Volkswagen T3 Transporter/Kombi contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVK001L - Volkswagen T3 Transporter/Kombi Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 44kg (96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 50.7kg (111.5lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Vw T5 Transporter Swb 2003-2015 - KRVK004T
$2,524.50
$2,805.00
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T5 Transporter SWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVK004T - Volkswagen T5 Transporter SWB (2003-2015) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAVT001 - Volkswagen T5 Caravelle/Transporter Foot Rails
1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 50.92kg (112.26lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 620mm (24")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 48.38kg (106lbs)
Front Runner
FRONT RUNNER Suzuki Fronx (2023-Current) Slimline Ii Roof Rack Kit - KRSF006T
$1,389.60
$1,544.00
Get your Suzuki Fronx geared-up for all types of adventures with the proven tough Slimline II Roof Rack Kit. This modular rack has 55+ available accessories, so transporting cargo, bicycles, kayaks, camping, or overland gear will be a breeze. Front Runner's popular Under Rack Table can be fitted to this rack so you can picnic wherever you stop.
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Suzuki Fronx. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSF006T - Suzuki Fronx (2023 - Current) Slimline II Roof Rack
Consisting of:
1x FASF001 - Suzuki Fronx (2023 - Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.14kg (51.01lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 595mm (23")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 29kg (64lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Hilux Revo Extra Cab 2016-On - KRTH019T
$1,107.00
$1,230.00
This 954mm/37.6" long, full-size, Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector, two (2) Tracks, and four (4) Feet to mount the Slimline II Tray to your 2016-Current Toyota Hilux Revo Extra Cab.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty.*
Note: Drilling is required for installation.
Features
KRTH019T - Toyota Hilux Revo Extra Cab (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FASS012 - Foot Set / 40mm - 50mm
1x FASS015 - Foot Set Angled / 75mm
1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
1x TRTH007 - Toyota Revo Extra Cab (2016-Current) Tracks
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.25kg (44.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 22kg (48lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Quantum Low Roof 2004-On - KRTQ005L
$2,727.00
$3,030.00
This 2272mm/89.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Quantum/HiAce Low Roof contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTQ005L - Toyota Quantum Low Roof (2004-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 43kg (94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 620mm (24")
Length 1635mm (64")
Height 160mm (6")
Shipping Weight:
Weight 49.7kg (109.3lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser Dc Ute Slimline Ii Roof Rack Kit - KRTL022L
$1,588.50
$1,765.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL022L - Toyota Land Cruiser 79 DC Pick-Up Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.5lbs)
Front Runner
FRONT RUNNER Slimsport Roof Rack Kit Fits Vw Volkswagen Amarok 2023-On - KSVA001T
$974.70
$1,083.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1468mm (57.8") x 1233mm (48.5").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSVA001T - Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSFR005 - Ford Ranger T6 Double Cab (22-Cur)Ssport RR K
1x RRAC251 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt WF
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Tray Dimensions:
1468mm (57.8") L x 1233mm (48.5") W x 139mm (5.5") H
Approximate Installed Weight: 20.74kg (45.72lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 210mm (8")
Shipping Weight:
Weight: 27.86kg (61lbs)
Front Runner
FRONT RUNNER Kia Sorento (2016-2020) Slimline Ii Roof Rack Kit - KRKS002T
$1,953.00
$2,170.00
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Kia Sorento 2016+. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRKS002T - Kia Sorento (2016-2020) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAKS002 - Kia Sorento (2016-Current) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32kg (71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 37.3kg (82.0lbs)
Front Runner
FRONT RUNNER Lada Niva 4X4 Slimline Ii Roof Rack Kit - KRLN001T
$1,534.50
$1,705.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for your Lada Niva 4x4 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLN001T - Lada Niva 4x4 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.43kg (62.68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 26.96kg (59lbs)
Front Runner
FRONT RUNNER Land Rover All-New Discovery 5 (2017-Current) Expedition Slimline Ii Roof Rack Kit - KRLD032T
$1,678.50
$1,865.00
This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment.
This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FALD007 - Land Rover All-New Discovery Foot Rails - by Front Runner1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 27kg (60lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")Length 1615mm (64")Height 250mm (10")
Shipping Weight:
Weight 31.9kg (70.1lbs)
Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Slimline Ii 1/2 Roof Rack Kit / Tall - KRLDT01L
$1,669.50
$1,855.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT01L - Land Rover Defender (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
3x LASS108 - No 8 Leg 250mm (Pair)
1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.48kg (69.4lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 31.48kg (69lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110 (1983-2016) Slimline Ii 3/4 Roof Rack Kit - KRLD035T
$2,379.60
$2,644.00
This 2166mm/85.3" long, 3/4 size, Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD035T - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit - by Front Runner
Consisting of:
4x LASS107 - No 7 Leg 225mm (Pair)
1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 42.74kg (94.23lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 43.4kg (95lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110 (1983-2016) Slimline Ii 3/4 Roof Rack Kit / Tall - KRLD030L
$2,379.60
$2,644.00
This 2166mm/85.3" 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD030L - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner
Consisting of:
4x LASS108 - No 8 Leg 250mm (Pair)1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 34.1kg (75.18lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 40.48kg (89lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110 (1983-2016) Slimline Ii Roof Rack Kit - KRLD003L
$2,739.60
$3,044.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD003L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 42kg (92lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 48.8kg (107.3lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110 (1983-2016) Slimline Ii Roof Rack Kit / Tall - KRLDT03L
$2,775.60
$3,084.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT03L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 42kg (93lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 49.0kg (107.8lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110 L663 (2020-Current) Slimline Ii Roof Rack Contour Kit - KRLD042T
$1,713.60
$1,904.00
This 1762mm/69.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 110 L663. Easily installs using the existing factory rails. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables.
An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD042T - Land Rover Defender 110 L663 (2020-Current) Slimline II Roof Rack Contour Kit
Consisting of:
1x FALD012 - Land Rover Defender L663 (2020-Cur) Contour Rail
1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.41kg (71.45lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1720mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 32kg (70lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110/130 (1983-2016) Slimline Ii 1/2 Roof Rack Kit - KRLD005L
$1,754.10
$1,949.00
This 1560mm/61.4" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110/130 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD005L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.8kg (78.8lbs)
Front Runner
FRONT RUNNER Land Rover Defender 110/130 (1983-2016) Slimline Ii 1/2 Roof Rack Kit / Tall - KRLDT05L
$1,781.10
$1,979.00
This 1560mm/61.4" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110/130 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT05L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
3 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 29kg (64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight: 33.8kg (74.3lbs)
Front Runner
FRONT RUNNER Land Rover Defender 130 Slimline Ii Roof Rack Kit - KRLD043T
$2,556.00
$2,840.00
Get your extremely capable Land Rover Defender 130 ready for heavy gear-carrying duties with the modular Slimline II Roof Rack Kit. With over 55 accessories available for this tough rack, you can confidently tackle any adventure with the right gear.
This 2368mm/93.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Defender 130. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The OEM Tracks need to be removed when fitting this Rack Kit. Vehicles with the panoramic sunroof, only the rear, large table can be fitted. If you fit the front table you will not be able to open the sunroof.
Features
KRLD043T - Land Rover Defender 130 Slimline II Roof Rack Kit
Consisting of:
1x FALD013 - Land Rover Defender 130 (2022-Curr) Foot Rails
1x RRSTD12 - SLII Tray - 1255mm(W)X2368mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.87kg (92.31lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 45kg (99lbs)
Front Runner
FRONT RUNNER Land Rover Defender 90 (1983-2016) Slimline Ii Roof Rack Kit - KRLD007L
$2,199.60
$2,444.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD007L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.8kg (87.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1615mm (64"); Height: 140mm (6")
Shipping Weight:
Weight: 38.28kg (84lbs)
Front Runner
FRONT RUNNER Land Rover Defender 90 (1983-2016) Slimline Ii Roof Rack Kit / Tall - KRLDT07L
$2,235.60
$2,484.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT07L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.0kg (90.2lbs)
Front Runner
FRONT RUNNER Land Rover Defender 90 (2020-Current) Slimline Ii Roof Rack Contour Kit - KRLD040T
$1,376.10
$1,529.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 90. Easily installs using the existing factory rails. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables.
An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit only allows your sunroof to operate in tilt/vent mode if an under rack table is fitted. Vehicles that are equipped with fabric roofs are not able to be opened if an under rack table is fitted.
Features
KRLD040T - Land Rover Defender 90 (2020-Current) Slimline II
Consisting of:
1x FALD011 - Land Rover Defender 90 (2020-Curr) Foot Rails/Mini
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57.33lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 23kg (51lbs)
Front Runner
FRONT RUNNER Land Rover Discovery 1And2 Slimline Ii Roof Rack Kit / Tall - KRLDT12L
$2,444.40
$2,716.00
This 1964mm/77.3" long, full size Slimline II cargo carrying roof rack kit for the Land Rover Discovery series 1 & 2 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLDT12L - Land Rover Discovery 1/2 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS110 - No 10 Leg 280mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (73lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.4kg (84.5lbs)
Front Runner
FRONT RUNNER Land Rover Discovery 2 Slimline Ii 1/2 Roof Rack Kit - KRLD010L
$1,705.50
$1,895.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Discovery 2 contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLDT10L - Land Rover Discovery 2 Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
2 x LASS110 - No 10 Leg 280mm (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 25kg (55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 29.3kg (64.4lbs)
Front Runner
FRONT RUNNER Land Rover Discovery 2 Slimline Ii 1/2 Roof Rack Kit / Tall - KRLDT10L
$1,716.30
$1,907.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Discovery 2 contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLDT10L - Land Rover Discovery 2 Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
2 x LASS110 - No 10 Leg 280mm (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 25kg (55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 29.3kg (64.4lbs)
Front Runner
FRONT RUNNER Land Rover Discovery 2 Slimline Ii Roof Rack Kit - KRLD012L
$2,430.00
$2,700.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Discovery 2 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD012L - Land Rover Discovery 2 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS109 - No 9 Leg 265mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.3kg (84.2lbs)
Front Runner
FRONT RUNNER Land Rover Discovery Lr3/Lr4 Slimline Ii 3/4 Roof Rack Kit - KRLD029T
$1,552.50
$1,725.00
This 1560mm/61.4" 3/4 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Discovery LR3/LR4. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
If your vehicle has a DAB antenna, the table can be inserted from either the right hand side or the left hand side of the roof rack to steer clear of the DAB antenna. If your vehicle does not have a DAB antenna, you may also orientate the table to mount from the rear of the roof rack.
**Please note. This Rack kit is not compatible with the Land Rover factory OEM Ladder. Consider purchasing the Front Runner Ladder for Land Rover Disco 3,4 / LR3, LR4 instead. (Part #LALD004).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD029T - Land Rover Discovery LR3/LR4 Slimline II 3/4 Roof Rack Kit - by Front Runner
Consisting of:
1 x FALD004 - Land Rover Discovery LR3 & LR4 1/2 Rack Foot Rails - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.7kg (72.0lbs)
Front Runner
FRONT RUNNER Land Rover Discovery Lr3/Lr4 Slimline Ii Roof Rack Kit - KRLD028T
$2,083.50
$2,315.00
This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Discovery LR3/LR4. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
If your vehicle has a DAB antenna, the tables can be inserted from either the right hand side or the left hand side of the roof rack to steer clear of the DAB antenna. If your vehicle does not have a DAB antenna, you may also orientate one table to mount from the rear of the roof rack.
**Please note. This Rack kit is not compatible with the Land Rover factory OEM Ladder. Consider purchasing the Front Runner Ladder for Land Rover Disco 3,4 / LR3, LR4 instead. (Part #LALD004).
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD028T - Land Rover Discovery LR3/LR4 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FALD003 - Land Rover Discovery LR3 + LR4 Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.97kg (88.12lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 41.63kg (92lbs)
Optima
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA
$379.00
$600.00
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA (Free Postage)
The Yellow Top battery is the result of four decades of technological innovation and engineering. Like Optima's Red Top and Blue Top batteries, the battery features Optima's "Six Pack." The AGM design features spiral cells filled with highly absorbent, fine fiberglass mats.
Handles Heavy Loads
The Yellow Top battery delivers vital power when there are high electrical loads. Sometimes, demand exceeds alternator capacity. It's an excellent choice for vehicles loaded with accessories. For example, the Yellow Top delivers the power needed to meet the demands of an aftermarket audio system with extra amplifiers. When there's a substantial draw of electrical current, the Optima Yellow Top delivers the superior performance you need. Heavy loads often deplete traditional flooded lead-acid batteries to the point that they never recover.
You can also count on the Yellow Top battery to meet regular starting and operational needs.
Excellent No-alternator Solution
The deep-cycle battery is the perfect choice when there is no alternator. For example, competitive racers love the Yellow Top. They use it in ultra-lightweight hill-climb cars, drag cars and motorkhana specials. Also, the Yellow Top is up to 15 times more resistant to vibration than traditional flooded designs. This is a big plus in typical racing conditions. Extreme enthusiasts trust the Yellow Top when a power failure is not an option.
This deep-cycle design offers other important advantages. Count on the Yellow Top to perform across the wide range of Australia's weather extremes. Enjoy the superior performance you require during winters in Melbourne and summers in Sydney.
The Yellow Top battery delivers up to three times the battery life of certain competitors. The maintenance-free design is good for more than 300 discharge and recharge cycles. Better yet, the AGM design is virtually spill-proof. It is possible to mount the Yellow Top in almost any position.
Invest in the Yellow Top, a high-performing AGM battery from Optima, an industry leader in advanced battery technology. Its best-in-class material purity outperforms competing lead alloy models.
The Yellow Top deep-cycle battery delivers reliable power every day and everywhere.
Features
Voltage: 12v
Terminal: SAE
Assembly: LHP
CCA 750
AH 55
L 254 x W 173 x H 199 mm
Deep-cycle and cranking power
Up to 3X longer life
15 times more vibration-resistant
Virtually spillproof
Mountable in virtually any position
Maintenance-free
Faster recharging
Optimal starting power
300+ discharge/recharge cycles
8012-254
TJM
TJM Awning To Suit Allora Rtt - 620ALYRTTAWN (Pick up Only)
$295.91
The TJM Awning is a perfect match for the Allora Aluminium Rooftop Tent, designed to bring added comfort and protection on your outdoor adventures. Constructed from durable 420D Oxford Polyester Fabric, this awning boasts a water column rating of 3000mm, ensuring reliable water resistance even in unpredictable weather. Quick and easy to set up, it offers ample shade, making it ideal for relaxing, or staying dry during unexpected showers. Enhance your rooftop tent experience with the TJM Awning—built tough for the great outdoors.
Specifications
Compatible:
TJM Allora Aluminium Roof Top Tent
Shade Coverage:
Provides up to 7.5m2 of shade
Material:
420D polyester Oxford fabric with 3000mm PU waterproof rating, UPF 50+
Parts Included:
Awning, aluminium telescopic tent poles, ground pegs, guy ropes, and storage bags
Package Weight:
6.50 kg
TJM
TJM Wireless 8 Gang Switch Panel Controller - 032TJM8WSPC
$284.90
Take control of your off-road setup with the ultimate 8-gang wireless switch controller from TJM. Designed for explorers who demand precision and power, this controller lets you command your 4x4’s accessories from up to 60m away. With customizable backlighting, 3 switch modes, and a140 interchangeable legends, you’ll have total control over your adventure. Quick to recharge, ruggedly built, and powerful enough for any job - this isn’t just a controller, it’s your key to freedom. Take The Lead.
Voltage: 12V/24V DCPower Capacity: 720W @ 12V DC, 1920W @ 24V DCMaximum Current: 60 amp (Combined Total)Standby Power: <3mAPower Source: 3.7V Dc Lithium 1000 mAhFrequency: 433MhzCharge Time: 2-3 hrsCertification: CE, EMC, RoHSDimensions: 127 x 69 x 14mm (Controller), 192 x 135 x 36mm (Control Box)Weight: 160grams (Controller), 570grams (Control Box)Package Weight: 2.18 kg
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
TJM
TJM Compressor Bundle - TJMCOMPRESSORBUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
