Front Runner
FRONT RUNNER Polaris Ford Ranger 1000 Crew Cab (2018-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSPR004T
$1,239.30
$1,377.00
This low-profile flat deck Slimsport rack has a load carrying area of 1559mm (61.4") L x 1238mm (48.7")W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Polaris Ranger UTV (2018-Current) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40 LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Features
KSPR004T - Polaris Ranger Crew Cab (2018-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSPR002 - Polaris Ranger Crew Cab (2018 - Current) Slimsport
1x RRAC242 - Polaris Ranger UTV(18-Curr)Ssport L-BarWindFairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1577mm(62.1") L x 1244mm(49") W x 184mm(7.2") H
Approximate Installed Weight: 24.1kg (53.13lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1696mm (67")
Height: 210mm (8")
Shipping Weight:
Weight: 27.18kg (60lbs)
Front Runner
FRONT RUNNER Polaris Ford Ranger Utv (2018-Current) Slimsport Roof Rack Kit - KSPR001T
$753.30
$837.00
This low-profile flat deck Slimsport rack has a load-carrying area of 749mm (29.5") x 1238mm (48.7").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Polaris Ranger UTV (2018-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KSPR001T - Polaris Ranger UTV (2018-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSPR001 - Polaris Ranger UTV (2018-Current) Slimsport Roof R
1x RRAC243 - Polaris Ranger Crew Cab(18-Curr)Ssport WindFairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
749mm (29.5") L x 1238mm (48.7") W x 157mm (6.2") H
Approximate Installed Weight: 15.84kg (34.92lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 250mm (10")
Length: 1560mm (61")
Height: 140mm (6")
Shipping Weight:
Weight: 15.6kg (34lbs)
Front Runner
FRONT RUNNER Polaris Ford Ranger Utv (2018-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSPR002T
$753.30
$837.00
This low-profile flat deck Slimsport rack has a load carrying area of 749mm (29.5") x 1238mm (48.7").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Polaris Ranger UTV (2018-Current) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Features
KSPR002T - Polaris Ranger UTV (2018-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSPR001 - Polaris Ranger UTV (2018-Current) Slimsport Roof R
1x RRAC242 - Polaris Ranger UTV(18-Curr)Ssport L-BarWindFairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
767mm(30.2") L x 1244mm(49") W x 158mm(6.2") H
Approximate Installed Weight: 13.5kg (29.76lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 250mm (10")
Length: 1560mm (61")
Height: 140mm (6")
Shipping Weight:
Weight: 15.4kg (34lbs)
Front Runner
FRONT RUNNER Porsche 911 (997 Model) Slimline Ii Roof Rack Kit - KRPN002T
$1,005.30
$1,117.00
The powerful Porsche 911 has little gear-carrying carrying capacity unless you fit Front Runner's modular Slimline II Roof Rack Kit. The Wind Deflector will help to minimize rack noise, while the tray is the perfect place to put extra cargo, your spare wheel or other gear.
This 954mm/37.6" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Porsche 911. It easily installs using the existing factory mounting points. No drilling required.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRPN002T - Porsche 911 (997 Model) Slimline II Roof Rack Kit
Consisting of:
1x FAPN001 - Porsche 911(997 Model) Mounting Bracket
1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 16.8kg (37.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 290mm (11")
Shipping Weight:
Weight: 23kg (51lbs)
Front Runner
FRONT RUNNER Porsche 924 Slimline Ii Roof Rack Kit - KRPN001T
$1,182.60
$1,314.00
This 954mm/37.6" long, full-size, Slimline II cargo carrying roof rack kit for the Porsche 924 contains the Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This Kit requires the vehicle to have protruding side gutters to be fitted. If unsure of fitment, please contact Front Runner Support.
Features
KRPN001T - Porsche 924 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x LASD102 - No 2 Leg Diagonal 130mm (Pair)2x RRAC034 - Inter-Slat Bracket1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 22.54kg (49.69lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 43.4kg (95lbs)
Front Runner
FRONT RUNNER Porsche Cayenne (2002-2010) Slimline Ii Roof Rack Kit - KRPC001T
$1,189.80
$1,322.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Porsche Cayenne contains Slimline II Tray, Wind Deflector and 4 Feet. Installs easily to factory/OEM tracks with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRPC001T - Porsche Cayenne (2002-2010) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
2 x RRAC907 - Stud Plate MB Sprinter Track
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 22.8kg (50.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
25.3kg (56.0lbs)
Front Runner
FRONT RUNNER Ram 1500 (2019-Current) Slimline Ii Roof Rack Kit - KRDR023T
$1,058.40
$1,176.00
Effortlessly increase your Ram 1500 Cab's gear-carrying capabilities with the 752mm/29.6" long Slimline II Roof Rack Kit. This off-road proven rack requires drilling to install. You now have the perfect platform to secure firewood, a Wolf Pack Pro, recovery tracks, or other equipment. Compatible with cab over campers.
This 752mm/29.6" long, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram 1500 Quad Cab. Also suitable for crew cab with over cab camper and 2500 / 3500 single cabs. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Suitable for:Full Size Slimline II for Ram 1500 Regular CabCab Over Camper Slimline II for RAM 1500 Quad CabCab Over Camper Slimline II for RAM 1500 Crew Cab
Note:Both traditional and panoramic sunroofs may be operated in 'vent mode' Only traditional sunroof can fully open, Panoramic can not fully open as it opens to the outside.Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current).Models with panoramic sunroofs include: Ram 1500 (2019-Current).
Features
KRDR023T - Ram 1500 Quad Cab (2019-Current) Slimline II Roof Rack Kit
Consisting of:
1x FADR005 - Ram 1500 Quad Cab(2019-Curr)Camper Rail
1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 17.08kg (37.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 22kg (48lbs)
Front Runner
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Roof Rack Kit - KSDR002T
$1,068.30
$1,187.00
Get your Ram 1500 ready for serious gear-carrying duties with the Slimsport Roof Rack. The sleek, low-profile Slimsport Roof Rack is form-fit to complement the aesthetic of your RAM and is compatible with 55+ accessories so you can kit up for any adventure.
This low-profile flat deck Slimsport rack has a load carrying area of 1660mm (65.4") x 1380mm (54.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Drilling required for installation.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Features
KSDR002T - RAM 1500 Slimsport Roof Rack Kit
Consisting of:
1x KSDR001 - Dodge Ram 1500 Slimsport Tray
1x RRAC279 - RAM 1500 Slimsport Rack Wind Fairing
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1660mm (65.4") L x 1380mm (54.3") W x 152mm (6") H
Approximate Installed Weight: 30.55kg (67.35lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 34kg (75lbs)
Front Runner
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSDR003T
$1,068.30
$1,187.00
Turn your RAM 1500 into the ultimate gear carrier with this low-profile Slimsport Rack. Thanks to the many available accessories, you can easily customize the rack according to your camping, sports or overland needs. It comes with a light bar-ready wind fairing, for all those late-night expeditions.
This low-profile flat deck Slimsport rack has a load carrying area of 1665mm (65.6") x 1380mm (54.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included is the RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing with a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSDR003T - RAM 1500 Slimsport Roof Rack Kit / Lightbar ready
Consisting of:
1x KSDR001 - Dodge Ram 1500 Slimsport Tray
1x RRAC280 - RAM 1500 Slimsport Rack 40"Lightbr Wind Fairing
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1665mm (65.6") L x 1380mm (54.3") W x 140mm (5.5") H
Approximate Installed Weight: 30.11kg (66.38lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 33kg (73lbs)
Front Runner
FRONT RUNNER Ram 1500 Quad Cab (2019 - Current) Slimline Ii Roof Rack Kit / Low Profile - KRDR013T
$1,421.10
$1,579.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Quad Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRDR013T - Ram 1500 Quad Cab (2019 Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FADR004 - Ram 1500 Quad Cab(2019-Curr)Foot Rails/ Low
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.54kg (60.72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 26.4kg (58lbs)
Front Runner
FRONT RUNNER Ram 1500 Quad Cab (2019-Current) Slimline Ii Roof Rack Kit - KRDR012T
$1,480.50
$1,645.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Quad Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contains 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRDR012T - Ram 1500 Quad Cab (2019-Current) Slimline II Roof Rack Kit by Front Runner
Consisting of:
1x FADR002 - Ram 1500 Quad Cab (2019-Current) Foot Rails
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 54.83kg (120.88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Weight: 445mm (18")
Length: 1730mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 26.8kg (59lbs)
Front Runner
FRONT RUNNER Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline Ii Roof Rack Kit - KRDR010T
$1,615.50
$1,795.00
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Crew Cab 2009+. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 openings to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note:
Both traditional and panoramic sunroofs may be operated in 'vent mode' and fully retracted, provided that you do NOT mount a table underneath. If you do mount a table underneath, only traditional sunroofs may be fully opened because they retract underneath the roof. Traditional sunroofs may NOT be operated in 'vent mode' because the table will interfere.
Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current)
Models with panoramic sunroofs include: Ram 1500 (2019-Current)
Features
KRDR010T - Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit by Front Runner
Consisting of:
1x FADR001 - Ram 1500 Crew Cab (2009-Current) Foot Rails1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.68kg (65.43lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 31kg (68lbs)
Front Runner
FRONT RUNNER Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline Ii Roof Rack Kit / Low Profile - KRDR011T
$1,624.50
$1,805.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Crew Cab. Drilling into the vehicle's roof is required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note:
Traditional sunroofs may be fully opened because they retract underneath the roof. They may NOT be opened in vent mode, otherwise the Low Profile rack will interfere.
If you wish to open a traditional sunroof in vent mode you may install Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit, provided that you do NOT mount a table underneath.
Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current)
Panoramic sunroofs may NOT be opened in any mode because they retract over the roof.
If you wish to open a panoramic sunroof in any mode you may install Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit, provided that you do NOT mount a table underneath.
Models with panoramic sunroofs include: Ram 1500 (2019-Current)
Features
KRDR011T - Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit / Low Profile by Front Runner
Consisting of:
1x FADR003 - Ram 1500 Crew Cab(2009-Curr)Foot Rails/ Low
1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.7kg (65.48lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.4kg (62lbs)
Front Runner
FRONT RUNNER Rivian R1S (2022-Current) Slimline Ii Roof Rack Kit - KRRR013T
$2,360.70
$2,623.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:5.07 kg (11.2 lbs)
Front Runner
FRONT RUNNER Rivian R1T (2022-Current) Slimline Ii Roof Rack Kit - KRRR012T
$1,708.20
$1,898.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:5.05 kg (11.1 lbs)
Front Runner
FRONT RUNNER Roof Rack Power Point - RRAC165
$61.20
$68.00
This power point bolts underneath any slat in the front, on the side, or at the rear of your Roof Rack.
Powered by Hella Extension Cord - 3m/10' power cord from your vehicles 12V accessory outlet.
Made from steel and sealed with the same durable, weather rated powder coating as the Front Runner Roof Racks.
Power additional lights such as, 4" LED Light Cube MX85-WD / 12V / Wide Beam or 4" LED Light Cube MX85-SP / 12V / Spot Beam.
Comes with power inlet and outlet to power light and additional 12V accessories simultaneously.
*Note: The Hella Extension Cord - 3m/10' power cord and 4" LED Light Cube MX85-WD / 12V / Wide Beam or 4" LED Light Cube MX85-SP / 12V / Spot Beam are sold separately.
Features
Consists of:
1 x Cover
2 x Female Hella Plugs
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
72mm (2.8") L x 112mm (4.4") W x 50mm (2") H
Weight:
300g (10.6oz)
Front Runner
FRONT RUNNER Roof Rack Spotlight Bracket - RRAC022
$59.40
$66.00
Strong Multi-function brackets, perfect for mounting spotlights or antenna brackets.
Position them anywhere along the T-slots on the front, rear or side of your Slimline II roof rack.
The dual mounting points drastically reduce vibration, extending the life of your mounted electrical accessories.
Can also be mounted upside down, if needed.
Made from stainless steel and features same black powder coating as Front Runner roof racks.
Compatible with the original Slimline Roof Rack, but drilling in to the rack is required.
Sold in pairs.
Features
Consists of:
2 x Adjustable Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated corrosion resistant steel
Product Dimensions:
80mm (3.2") L x 61mm (2.4") W x 66mm (2.6") H (Single Bracket)
Weight:
210g (7.4oz) (Pair)
Front Runner
FRONT RUNNER Suzuki Jimny (2018-Current) Slimline Ii 3/4 Roof Rack Kit - KRSJ006T
$1,305.90
$1,451.00
This 1156mm/45.5" long, 3/4 size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 2018+ contains the Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Note: This Suzuki Jimny Kit requires the use of the supplied 20mm Lip Wind Deflector.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ006T - Suzuki Jimny (2018-Current) Slimline II 3/4 Roof Rack Kit
Consisting of:
2x LASS102 - No 2 Leg 130mm (Pair)
1x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.77kg (52.4lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 25.69kg (57lbs)
Front Runner
FRONT RUNNER Toyota Hilux Revo Dc (2016-Current) Slimline Ii Roof Rack Kit - KRTH011T
$1,451.70
$1,613.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Double Cab. Drilling into the vehicles roof is required to insert mounting hardware, a template is provided for hole placement.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTH011T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATH002 - Toyota Hilux Revo DC (2016-Current) Foot Rails - by Front Runner
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 25kg (56lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 620mm (24")
Length 1640mm (65")
Height 160mm (6")
Shipping Weight:
Weight 29.4kg (64.7lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 60 Slimline Ii Roof Rack Kit / Tall - KRTL041T
$2,295.00
$2,550.00
This 2166mm/85.3" long, full-size, Slimline II cargo carrying roof rack kit for the 60 Series Toyota Land Cruiser contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL041T - Toyota Land Cruiser 60 Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
1x LASD105 - No 5 Leg Diagonal 190mm (Pair)
1x LASS027 - Leg Spacer 6mm (Pair)
3x LASS104 - No 4 Leg 170mm (Pair)
1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.84kg (92.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 405mm (16")
Shipping Weight:
Weight: 39.46kg (87lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 78 Slimline Ii 3/4 Roof Rack Kit / Tall - KRTL040T
$2,199.60
$2,444.00
This 1964mm/77.3 long, 3/4 size, Slimline II cargo carrying roof rack kit for the 78 series Toyota Land Cruiser contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL040T - Toyota Land Cruiser 78 Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner
Consisting of:
4x LASS107 - No 7 Leg 225mm (Pair)
1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 40.99kg (90.37lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 40.48kg (89lbs)
Front Runner
FRONT RUNNER Toyota Prado 150 (2010-Current) Slimsport Roof Rack Kit - KSTP003T
$1,430.10
$1,589.00
Gear up your Toyota Rav4 (2019-Current) for any adventure with the Slimsport Roof Rack Kit. The Slimsport was designed for activity-focused drivers that do not require an expedition-grade build. It has a low-profile and is compatible with over 55 Front Runner accessories.
This low-profile flat deck Slimsport rack has a load-carrying area of 1676mm (66") x 1175mm (46.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Rav4 (2019-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Additional drilling is required for the RAV4 LE models.Note: The panoramic glass roof is not operational when this Rack Kit is installed. For panoramic glass roof the Toyota Rav4 (2019-Current) Slimline II Roof Rack Kit is suited, or Toyota Rav4 Adventure / TRD-Offroad (2019-Current) Slimline II Roof Rack Kit for adventure model.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1 x Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit1 x RRAC238 - Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing1 x RRAC971 - Protection stripInstallation HardwareFitting Instructions
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Dimensions: 1676mm (66") L x 1175mm (46.3") W x 135mm (5.3") H
Approximate Installed Weight: 34.74kg (76.59lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1705mm (67")Height: 220mm (9")
Shipping Weight:Weight: 35kg (77lbs)
Front Runner
FRONT RUNNER Toyota Prado 95 Slimline Ii Roof Rack Kit - KRTP015L
$1,950.30
$2,167.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for your Toyota Prado 95 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP015L - Toyota Prado 95 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASP104 - No 4 Plus Leg 180mm (Pair) - by Front Runner
1 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.9kg (79.0lbs)
Front Runner
FRONT RUNNER Toyota Quantum Slimline Ii Roof Rack Kit - KRTQ003L
$2,739.60
$3,044.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Toyota Quantum/HiAce contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTQ003L - Toyota Quantum (2004-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 43kg (95lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 50.1kg (110.2lbs)
Front Runner
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSTR002T
$1,299.60
$1,444.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1676mm (66") x 1175mm (46.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Rav4 (2019-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please Note: Additional drilling is required for the RAV4 LE models.
Features
KSTR002T - Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner
Consisting of:
1x KSTR001 - Toyota Rav4 (2019-Current) Slimsport Roof Rack
1x RRAC220 - Toyota Rav4 Slimsport Rack 40" Light Bar Wind Fairing
1x RRAC971 - Protection Strip
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1676mm (66") L x 1175mm (46.3") W x 135mm (5.3") H
Approximate Installed Weight: 33.94kg (74.82lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1705mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 34kg (75lbs)
Front Runner
FRONT RUNNER Toyota Tacoma (2005-2023) Slimsport Roof Rack Kit - KSTT003T
$1,053.00
$1,170.00
This low profile flat deck Slimsport rack has a load-carrying area of 1420mm (55.9") x 1197mm (47.1").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing RRAC192 (sold separately) has a 40" cutout to allow use of LIGH199 (sold separately).
Fitment guide and all mounting hardware included.
Note: No drilling required
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTT003T - Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit
1 x RRAC231 - TOYOTA TACOMA SLIMSPORT RACK WIND FAIRING
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1420mm (55.9") L x 1197mm (47.1") W x 142mm (5.5") H
Approximate Installed Weight: 26.57kg (58.58lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 26.57kg (58lbs)
Front Runner
FRONT RUNNER Toyota Tacoma (2005-2023) Slimsport Roof Rack Kit / Lightbar Ready - KSTT002T
$1,053.00
$1,170.00
Fits to existing factory holes with factory rails removed.
Low-profile flat deck Slimsport rack has a load carrying area of 1420mm (55.9") x 1197mm (47.1").
Sleek side rails have integrated mounting feet with additional brace brackets for added strength.
High-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Included in the Toyota Tacoma (2005-Current) Slimsport is a 40" cutout to allow the use of the Front Runner 40 LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTT002T - Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner
Consisting of:
1x KSTT001 - Toyota Tacoma (2005-Curr) SlimSport Roof Rack Kit
1x RRAC192 - Toyota Tacoma Slimsport Rack 40" LBar Wind Fairing
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1420mm (55.9") L x 1197mm (47.1") W x 142mm (5.5") H
Approximate Installed Weight: 30.15kg (66.47lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 210mm (8")
Shipping Weight:
Weight: 31kg (68lbs)
Front Runner
FRONT RUNNER Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit - KSTT004T
$1,240.20
$1,378.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1420mm (55.9) x 1197mm (47.1).
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Tundra (2022-current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
Features
KSTT004T - Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSTT002 - Toyota Tundra Crew Cab(2022-Curr)Ssport Rack Tray
1x RRAC263 - Toyota Tundra Crew Cab (2022-Current) Slimsport Ra
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1420mm (55.9") L x 1197mm (47.1") W x 143mm (5.6") H
Approximate Installed Weight: 31.3kg (69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 320mm (13")
Length: 1700mm (67")
Height: 210mm (8")
Shipping Weight:
Weight: 32kg (70lbs)
Front Runner
FRONT RUNNER Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSTT005T
$1,240.20
$1,378.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1420mm (55.9) x 1197mm (47.1).
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included in the Toyota Tundra (2022-current) Slimsport Rack 40" Light Bar Wind Fairing allows the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
Features
KSTT005T - Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSTT002 - Toyota Tundra Crew Cab(2022-Curr)Ssport Rack Tray
1x RRAC264 - Toyota Tundra Crew Cab (2022-Current) Slimsport Ra
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1420mm (55.9") L x 1197mm (47.1") W x 143mm (5.6") H
Approximate Installed Weight: 30.55kg (67.35lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 320mm (13")
Length: 1700mm (67")
Height: 255mm (10")
Shipping Weight:
Weight: 32.5kg (72lbs)
Front Runner
FRONT RUNNER Toyota Tundra Crew Max (2022-Current) Slimline Ii Roof Rack Kit - KRTT007T
$1,732.50
$1,925.00
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Tundra Crew Max. Drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTT007T - Toyota Tundra CrewMax (2022-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FATT008 - Toyota Tundra CrewMax (2022-Current) Foot Rail
1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 33.63kg (74.14lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 35kg (77lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 79 Dc Ute Slimline Ii 3/4 Roof Rack Kit - KRTL023L
$1,191.60
$1,324.00
This 954mm/37.6" long 3/4 size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
This 954mm/37.6" long 3/4 size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTJ05 - Slimline II Tray - 1425mm(W) X 964mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 20kg (45lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 23.8kg (52.4lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 79 Dc Ute Slimline Ii Roof Rack Kit - KRTL030L
$1,700.10
$1,889.00
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruisers DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruisers DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
3 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 32.4kg (71.2lbs)
Front Runner
FRONT RUNNER Volkswagen Caddy (2022-Current) Slimline Ii Roof Rack Kit - KRVC015T
$1,586.70
$1,763.00
Transform your Volkswagen Caddy into the most versatile cargo carrier imaginable when you fit Front Runner's reliable Slimline II Roof Rack Kit. It's the perfect solution for the tradesman who needs to load up his work gear during the week and his sports or camping gear on the weekend.
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy SWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVC015T - Volkswagen Caddy (22 - Curr) SWB Slimline II Roo
Consisting of:
1x FAVC001 - Volkswagen Caddy (2022-Current) Footrails
1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.82kg (61.33lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 33kg (73lbs)
Front Runner
FRONT RUNNER Volkswagen Caddy Lwb (2015-2020) Slimline Ii Roof Rack Kit - KRVC013T
$1,862.10
$2,069.00
Get your Volkswagen Caddy set up for work or play gear-carrying duties by easily installing the modular and tough Slimline II Roof Rack kit. This rack has more than 55 accessories to gear up for your next Caddy adventure.
This 1964mm/77.32" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy LWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVC013T - Volkswagen Caddy (2015 - 2020) LWB Slimline II Roof Rack
Consisting of:
1x FAVC002 - Volkswagen Caddy (2015-2020) LWB Foot Rail
1x RRSTA10 - SLII Tray - 1165mm(W)X1964mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.71kg (72.11lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER Volkswagen Caddy Swb (2015-2020) Slimline Ii Roof Rack Kit - KRVC014T
$1,499.40
$1,666.00
Transform your Volkswagen Caddy's gear-carrying capabilities with the proven Slimline II Roof Rack Kit. This rack has over 55 available accessories, so it can easily fulfil your every work or play need. Great for carrying a kayak or long work gear that won't fit in the back.
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 4 Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy SWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVC014T - Volkswagen Caddy SWB (2015-2020) Slimline II Roof Rack Kit
Consisting of:
1x FAVC003 - Volkswagen Caddy SWB (2015-2020) Footrails
1x RRSTA08 - SLII Tray - 1165mm(W)X1560mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 26.11kg (57.56lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 36kg (79lbs)
Front Runner
FRONT RUNNER Volkswagen T6/T6.1 Caravelle Transporter Lwb (2015-Current) Slimline Ii Roof Rack Kit - KRVT019T
$2,729.70
$3,033.00
This 2772mm/109.1" long, full size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your 2015-Current Volkswagen T6/T6.1. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVT019T - Volkswagen T6/T6.1 Caravelle Transporter LWB 2015-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAVT004 - Volkswagen T6/T6.1 Caravelle/Transporter LWB FR
1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 53.54kg (118.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 54kg (119lbs)
Front Runner
FRONT RUNNER Volkswagen Touareg (2002-2010) Slimline Ii Roof Rack Kit - KRVT005T
$1,407.60
$1,564.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Volkswagen Touareg contains Slimline II Tray, Wind Deflector and 6 Feet. It installs easily to factory mounting points with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVT005T - Volkswagen Touareg (2002-2010) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)
Front Runner
FRONT RUNNER Suzuki Jimny (2018-Current) Slimline Ii Roof Rack / Tall - KRSJ005T
$1,430.10
$1,589.00
This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the 2018+ Suzuki Jimny contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ005T - Suzuki Jimny (2018-Current) Slimline II Roof Rack / Tall
Consisting of:
3x LASS103 - No 3 Leg 155mm (Pair)
1x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.51kg (67.26lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 180mm (7")
Shipping Weight:
Weight: 30kg (66lbs)
Front Runner
FRONT RUNNER Suzuki Jimny 5 Door (2023-Current) Slimline Ii Roof Rack - KRSJ007T
$1,799.10
$1,999.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 5 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ007T -Suzuki Jimny 5 Door (2018-Current) Slimline II Roof Rack
Consisting of:
4x LASS102 - No 2 Leg 130mm (Pair)
2x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.37kg (84.59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 170mm (7")
Shipping Weight:
Weight: 39kg (86lbs)
Front Runner
FRONT RUNNER Suzuki Jimny 5 Door (2023-Current) Slimline Ii Roof Rack Kit / Tall - KRSJ008T
$1,804.50
$2,005.00
Massively increase the extra gear-carrying capacity for your 5-door Suzuki Jimny with this full-length Slimline II Roof Rack Kit. This tall version of the kit makes it effortless to have under rack accessories such as the popular Under Rack Table. There are over 55 camping, overland and sports gear accessories for this strong rack, so no Jimny adventure is off the table.
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 5 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ008T - Suzuki Jimny 5 Door (2023-Current) Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS027 - Leg Spacer 6mm (Pair)
4x LASS103 - No 3 Leg 155mm (Pair)
2x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.14kg (84.08lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1720mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 39kg (86lbs)
Front Runner
FRONT RUNNER Toyota Fj Cruiser Slimline Ii 1/2 Roof Rack Kit - KRTF021T
$1,435.50
$1,595.00
This 1156mm/45.5" long 1/2 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota FJ Cruiser. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF021T - Toyota FJ Cruiser Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF004 - Toyota FJ Cruiser Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.4kg (71.2lbs)
Front Runner
FRONT RUNNER Toyota Fortuner (2016-Current) Slimline Ii Roof Rack Kit - KRTF010T
$1,939.50
$2,155.00
This 1964mm/77.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2016+ Toyota Fortuner. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF010T - Toyota Fortuner (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF005 - Toyota Fortuner (2016-Current) Foot Rails - by Front Runner
1 x RRSTA10 - Slimline II Tray - 1165mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (73lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 630mm (25")
Length 1640mm (65")
Height 160mm (6")
Shipping Weight:
Weight 38.8kg (85.3lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 200/Lexus Lx570 Slimline Ii Roof Rack Kit - KRTL028T
$2,137.50
$2,375.00
This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 200 or Lexus LX570. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: For fitment to the Lexus LX570, the flush roof rails are required to be removed and the headliner will need to be lowered.
Features
KRTL028T - Toyota Land Cruiser 200/Lexus LX570 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FATL001 - Toyota Land Cruiser 200 Foot Rails
1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 42.64kg (94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 43.14kg (95lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 300 Slimline Ii Roof Rack Kit - KRTL045T
$2,159.10
$2,399.00
This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 300. It easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL045T - Toyota Land Cruiser 300 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FATL004 - Toyota Land Cruiser 300 (2021-Current) Foot Rails1x RRSTG11 - SLII Tray - 1345mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 42.57kg (93.85lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 255mm (10")
Shipping Weight:
Weight: 45kg (99lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 300 Slimline Ii Roof Rack Kit / Low Profile - KRTL046T
$2,252.70
$2,503.00
This 2166mm/83.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 300.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTL046T - Toyota Land Cruiser 300 SLII Roof Rack Kit/LowProfile - by Front Runner
Consisting of:
1x FATL005 - Toyota Land Cruiser 300 (2021-Curr)Low Foot Rails
1x RRSTG11 - SLII Tray - 1345mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 42.4kg (93.48lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 255mm (10")
Shipping Weight:
Weight: 44kg (97lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser 76 Slimline Ii 3/4 Roof Rack Kit - KRTL014L
$2,190.60
$2,434.00
This 2166mm/85.3" long 3/4 size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser 76 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL014L - Toyota Land Cruiser 76 Slimline II 3/4 Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 34kg (76lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight: 40.0kg (87.9lbs)
Front Runner
FRONT RUNNER Toyota Prado 120 Slimline Ii 1/2 Roof Rack Kit - KRTP014T
$1,547.10
$1,719.00
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Prado 120. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP014T - Toyota Prado 120 Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATP002 - Toyota Prado 120 Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 27kg (59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 31.0kg (68.2lbs)
Front Runner
FRONT RUNNER Toyota Prado 120 Slimline Ii Roof Rack Kit - KRTP012T
$2,069.10
$2,299.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Prado 120. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP012T - Toyota Prado 120 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATP002 - Toyota Prado 120 Foot Rails - by Front Runner
1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.9kg (85.5lbs)
Front Runner
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit - KSTS002T
$1,833.30
$2,037.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2637mm (103.8") L x 1383mm (54.5") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Sequoia (2023-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KSTS002T - Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC285 - Toyota Sequoia (2023 - Current) Slimsport Rack Win
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2637mm (103.8) L x 1383mm (54.4) W x 170mm (6.7) H
Approximate Installed Weight: 45.78kg (100.93lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 46kg (101lbs)
Front Runner
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSTS003T
$1,833.30
$2,037.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2666mm (105") x 1383mm (54.4").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Sequoia (2023-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTS003T - Toyota Sequoia(2023-Cur) Slimsport Roof Rack Kit Lightbar Ready
Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC286 - Toyota Sequoia(23-cur)Slimsport rack 40" lightbar wind faring
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2666mm (105) L x 1383mm (54.4) W x 196mm (7.7) H
Approximate Installed Weight: 45.45kg (100.2lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 270mm (11")
Length: 1700mm (67")
Height: 325mm (13")
Shipping Weight:
Weight: 47kg (103lbs)
Optima
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA
$379.00
$600.00
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA (Free Postage)
The Yellow Top battery is the result of four decades of technological innovation and engineering. Like Optima's Red Top and Blue Top batteries, the battery features Optima's "Six Pack." The AGM design features spiral cells filled with highly absorbent, fine fiberglass mats.
Handles Heavy Loads
The Yellow Top battery delivers vital power when there are high electrical loads. Sometimes, demand exceeds alternator capacity. It's an excellent choice for vehicles loaded with accessories. For example, the Yellow Top delivers the power needed to meet the demands of an aftermarket audio system with extra amplifiers. When there's a substantial draw of electrical current, the Optima Yellow Top delivers the superior performance you need. Heavy loads often deplete traditional flooded lead-acid batteries to the point that they never recover.
You can also count on the Yellow Top battery to meet regular starting and operational needs.
Excellent No-alternator Solution
The deep-cycle battery is the perfect choice when there is no alternator. For example, competitive racers love the Yellow Top. They use it in ultra-lightweight hill-climb cars, drag cars and motorkhana specials. Also, the Yellow Top is up to 15 times more resistant to vibration than traditional flooded designs. This is a big plus in typical racing conditions. Extreme enthusiasts trust the Yellow Top when a power failure is not an option.
This deep-cycle design offers other important advantages. Count on the Yellow Top to perform across the wide range of Australia's weather extremes. Enjoy the superior performance you require during winters in Melbourne and summers in Sydney.
The Yellow Top battery delivers up to three times the battery life of certain competitors. The maintenance-free design is good for more than 300 discharge and recharge cycles. Better yet, the AGM design is virtually spill-proof. It is possible to mount the Yellow Top in almost any position.
Invest in the Yellow Top, a high-performing AGM battery from Optima, an industry leader in advanced battery technology. Its best-in-class material purity outperforms competing lead alloy models.
The Yellow Top deep-cycle battery delivers reliable power every day and everywhere.
Features
Voltage: 12v
Terminal: SAE
Assembly: LHP
CCA 750
AH 55
L 254 x W 173 x H 199 mm
Deep-cycle and cranking power
Up to 3X longer life
15 times more vibration-resistant
Virtually spillproof
Mountable in virtually any position
Maintenance-free
Faster recharging
Optimal starting power
300+ discharge/recharge cycles
8012-254
TJM
TJM Awning To Suit Allora Rtt - 620ALYRTTAWN (Pick up Only)
$295.91
The TJM Awning is a perfect match for the Allora Aluminium Rooftop Tent, designed to bring added comfort and protection on your outdoor adventures. Constructed from durable 420D Oxford Polyester Fabric, this awning boasts a water column rating of 3000mm, ensuring reliable water resistance even in unpredictable weather. Quick and easy to set up, it offers ample shade, making it ideal for relaxing, or staying dry during unexpected showers. Enhance your rooftop tent experience with the TJM Awning—built tough for the great outdoors.
Specifications
Compatible:
TJM Allora Aluminium Roof Top Tent
Shade Coverage:
Provides up to 7.5m2 of shade
Material:
420D polyester Oxford fabric with 3000mm PU waterproof rating, UPF 50+
Parts Included:
Awning, aluminium telescopic tent poles, ground pegs, guy ropes, and storage bags
Package Weight:
6.50 kg
TJM
TJM Wireless 8 Gang Switch Panel Controller - 032TJM8WSPC
$284.90
Take control of your off-road setup with the ultimate 8-gang wireless switch controller from TJM. Designed for explorers who demand precision and power, this controller lets you command your 4x4’s accessories from up to 60m away. With customizable backlighting, 3 switch modes, and a140 interchangeable legends, you’ll have total control over your adventure. Quick to recharge, ruggedly built, and powerful enough for any job - this isn’t just a controller, it’s your key to freedom. Take The Lead.
Voltage: 12V/24V DCPower Capacity: 720W @ 12V DC, 1920W @ 24V DCMaximum Current: 60 amp (Combined Total)Standby Power: <3mAPower Source: 3.7V Dc Lithium 1000 mAhFrequency: 433MhzCharge Time: 2-3 hrsCertification: CE, EMC, RoHSDimensions: 127 x 69 x 14mm (Controller), 192 x 135 x 36mm (Control Box)Weight: 160grams (Controller), 570grams (Control Box)Package Weight: 2.18 kg
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
TJM
TJM Compressor Bundle - TJMCOMPRESSORBUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
