The Subaru XV Crosstrek 2nd Gen (2018-2023) Slimsport Roof Rack Kit is the key to your most fun adventures yet. It comes light bar ready, so you can keep the journey going into the after-hours. This durable, low-profile rack lets you immediately haul out to the Great Outdoors with a wide variety of compatible Front Runner accessories.   Fits to existing factory holes with factory rails removed. This low-profile flat deck Slimsport rack has a load carrying area of 1474mm (58") x 1146mm (45.11"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included in the Subaru XV Crosstrek (2017-2023) Slimsport is a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables are not compatible with Slimsport rack kits All Front Runner Racks are backed by a Limited Lifetime Warranty* KSSX002T - Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit / Lightbar readyConsisting of:1x KSSX001 - Subaru XV Crosstrek (2017-2023)Ssport RR K1x RRAC211 - Subaru XV Cros Slimspot Rack 40" LBar Wind FairingMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.15kg (75.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 230mm (9")Shipping Weight:Weight: 35kg (77lbs)

Transform your Subaru Outback GEN 6 into an extraordinary gear carrier with the low-profile and Lightbar-ready Slimsport Roof Rack. This durable, user-friendly rack can be adapted to carry sports, adventure or any other gear. Don’t be afraid of using your Subaru in the dark as this rack already has a cutout for a 40” lightbar.    This low-profile flat deck Slimsport rack has a load carrying area of 1999mm (78.7") x 1151mm (45.3"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.\ Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included is the Subaru Outback GEN 6 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing has a cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Sunroof fully operational in slide open and closed mode. Note: Sunroof not operational in vent / tilt mode. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Transform your Subaru Outback GEN 6 into an extraordinary gear carrier with the low-profile and lightweight Slimsport Roof Rack. This durable, user-friendly rack can be adapted to carry camping, sports, work, or any other gear. The multi-functional Slimsport Roof Rack will effortlessly do the job in the city and when off-road.   This low-profile flat deck Slimsport rack has a load-carrying area of 1999mm (78.7") x 1151mm (45.3"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket. Easily add on the Slimsport Side Mount Accessory Bracket / Small (sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim makes the rack ultra-quiet. Need a lightbar? The optional (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). The fitment guide and all mounting hardware are included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Sunroof fully operational in slide open and closed mode. Note: Sunroof not operational in vent / tilt mode. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Get ready for endless adventures when you fit the low-profile Slimsport Roof Rack to your Subaru Crosstrek. You can easily fit any Front Runner top mount accessories to the high-strength aluminium slats. Your Subaru is now ready for any gear needed for your adventures.   Fits to existing factory holes with factory rails removed. This low-profile flat deck Slimsport rack has a load carrying area of 1633mm (64.3") x 1146mm (45.11"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included is the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSSC003T - Subaru Crosstrek(2023-Curr)Ssport RRack LightReady Consisting of:1x KSSC001 - Subaru Crosstrek (2023-Current) Slimsport Tray1x RRAC211 - Subaru XV Cros Slimspot Rack 40" LBar Wind Fairing Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:1633mm (64.3") L x 1146mm (45.12") W x 137mm (5.4") H Approximate Installed Weight: 25.22kg (55.6lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions:Width: 225mm (9")Length: 1700mm (67")Height: 235mm (9") Shipping Weight:Weight: 28kg (62lbs)

Get ready for awesome gear-carrying adventures when you fit this low-profile Slimsport Roof Rack to your Subaru Crosstrek. This tough rack has a large load-carrying area, and thanks to its high-strength aluminum slats, you can fit all Front Runner top mount accessories onto it.   Fits to existing factory holes with factory rails removed. This low-profile flat deck Slimsport rack has a load carrying area of 1640mm (64.6") x 1146mm (45.11"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Drilling required. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.

Get set for customized weekend getaways and sporty adventures with the Mazda BT50 Slimsport Roof Rack Kit. Attach your rack accessories using the T-slots found in the slats. The included wind fairing on this sleek rack ensures rack noise is minimal.     This low profile flat deck Slimsport rack has a load-carrying area of 1413mm (55.6") L x 1141mm (44.9"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Fitment guide and all mounting hardware included. Note: Drilling maybe required for some models. All Front Runner Racks are backed by a Limited Lifetime Warranty*

This lightbar-ready Slimsport Roof Rack Kit offers a sleek storage solution for the Lexus GX 550. It’s perfect for nighttime adventures, thanks to the 40’ cutout for a light bar. The T-slots on the rack’s strong slats can easily accommodate sports and camping gear accessories.    This low-profile flat deck Slimsport rack has a load carrying area of 2210mm (87") L x 1200mm (47.2") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet. Included in the Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing allows the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSLE003T - Lexus GX 550 (2024-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC341 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 40kg (88lbs)

The Slimsport Roof Rack Kit offers a sleek storage solution for the Lexus GX 550. Safely carry all your sports and camping gear, so you can get kitted for any adventure. Includes noise-reducing, aerodynamic wind fairing.   This low-profile flat deck Slimsport rack has a load-carrying area of 2210mm (87") L x 1200mm (47.2") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSLE002T - Lexus GX 550 (2024-Current) Slimsport Roof Rack KitConsisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC340 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 40kg (88lbs)

Use all of the valuable cargo carrying space you can with the Volkswagen T5/T6 (SWB or LWB) w/SCA Pop Top Slimline II Roof Rack Kit. Mount 55+ accessories on what was once wasted roof space so you can adventure longer and explore more. This 1358mm/ 53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T5/T6 (2003-Current) w/SCA Pop Top Roof contains Slimline II Tray, Wind Deflector and 6 mounting Feet. This system installs easily with off-road tough feet that grip onto the existing factory/OEM SCA Pop Top rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Please adhere to the load rating of your SCA Pop Top Roof.   KRVK008T - Volkswagen T5/T6 (2003-Current) w/SCA Pop Top Roof Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner3 x RRAC907 - Stud Plate MB Sprinter Track1 x RRSTG07 - Slimline II Tray - 1345mm(W) X 1358mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 24.8kg (54.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Height: 150mm (5.9")Length: 1730mm (68.1")Width: 440mm (17.3")   Shipping Weight: Weight 25.4Kg (56lbs)

This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Volkswagen T5 Transporter. It easily installs using the existing factory mounting points. No drilling required. This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Volkswagen T5 Transporter. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRVK005T - Volkswagen T5 Transporter SWB (2003-2015) Slimline II 1/2 Roof Rack Kit - by Front RunnerConsisting of:1x FAVT001 - Volkswagen T5 Caravelle/Transporter Foot Rails1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.75kg (76.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 620mm (24")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 32.55kg (72lbs)

Prepare your Volkswagen ID Buzz SWB for any adventure with the Slimline II Roof Rack. This highly versatile roof rack is designed to fit perfectly on your Buzz and boasts a unique modular design that allows you to customize it with a wide range of accessories to suit your travel and adventure-sports lifestyle. This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your Volkswagen ID Buzz SWB. It easily installs using the existing factory mounting points. No drilling is required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRVI001T - Volkswagen ID Buzz SWB Slimline II Roof Rack KitConsisting of:1x FAVI001 - Volkswagen ID Buzz Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.96kg (68.26lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")Shipping Weight:Weight: 37kg (81lbs)

This 1964mm/77.3" long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy Maxi. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a limited lifetime warranty.*   KRVC016T - Volkswagen Caddy Maxi LWB (2022-Current) Slimline II RoofConsisting of:1x FAVC004 - Volkswagen Caddy (2020 - Current) LWB Foot Rail1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 265mm (10")Shipping Weight:Weight: 40kg (88lbs)

This 1560mm/64.1" long full-size Slimline II cargo carrying roof rack kit for the Volkswagen Caddy contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling may be required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.   KRVC011T - Volkswagen Caddy (2022-Current) Slimline II Roof Rack Kit - by Front RunnerConsisting of:3x FASS025 - Foot Set / 70mm - 80mm1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)1x TRMP004 - Mitsubishi Pajero Sport Tracks / 1900mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.03kg (66.2lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1965mm (77")Height: 275mm (11")Shipping Weight:Weight: 31kg (68lbs)

This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen California T6.1 contains a Slimline II Tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Due to the weight of the roof rack after fitting, the function of the pop-up roof can only be used to a limited extent.   KRVC010T - Volkswagen California T6.1 Slimline II Roof Rack Kit - by Front RunnerConsisting of:4x FASS024 - Foot Set / 50mm - 60mm1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 32.46kg (71.56lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1715mm (68")Height: 155mm (6")Shipping Weight:Weight: 31.4kg (69lbs)

Add even more versatility to your Volkswagen Crafter/MAN TGE w/o OEM Tracks (2017-Current) and explore more with this Slimline II Roof Rack Kit. Haul your adventure gear and toys to those secret camping spots and still have interior room for more cargo and passengers. This 2772mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the VW Crafter/MAN TGE contains the Slimline II Tray, Wind Deflector, 2 Tracks and 8 Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.   KRVC009T - VW Crafter/MAN TGE w/oOEM Tracks(17-Current) Slimline II Roof Rack KitConsisting of:3x FASS024 - Foot Set / 50mm - 60mm1x FASS028 - Foot Set / 85mm-95mm1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)1x TRMS001 - Mercedes-Benz Sprinter (2006-Curr) Tracks/3082-4098mmL1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 52.39kg (115.5lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1800mm (71")Height: 270mm (11")Shipping Weight:Weight: 52.6kg (116lbs)

Add even more versatility to your Volkswagen Crafter/MAN TGE w/OEM Tracks (2017-Current) and explore more with this Slimline II Roof Rack Kit. Haul your adventure gear and toys to those secret camping spots and still have interior room for more cargo and passengers. This 2772mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the VW Crafter/MAN TGE contains a Slimline II tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRVC008T - Volkswagen Crafter/MAN TGE w/OEM Tracks (2017-Current) Slimline II Roof Rack Kit - by Front RunnerConsisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC907 - Stud Plate MB Sprinter Track1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44.48kg (98.06lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1715mm (68")Height: 230mm (9")Shipping Weight:Weight: 45.6kg (100lbs)

This 2772mm/ 109" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen Crafter w/OEM Tracks contains Slimline II Tray, Wind Deflector and 8 mounting Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.  All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRVC004T - Volkswagen Crafter Slimline II Roof Rack Kit/Tall Consisting of: 4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner  Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 39kg (85lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 45.0kg (99.0lbs)

This 2772mm/ 109" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen Crafter w/o OEM Tracks contains Slimline II Tray, Wind Deflector, 2 Tracks and 8 mounting Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRVC003T - Volkswagen Crafter w/o OEM Tracks Slimline II Roof Rack Kit - by Front Runner Consisting of: 4 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner1 x TRMS001 - Mercedes-Benz Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 45kg (100lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 52.7kg (116.0lbs)

This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a limited lifetime warranty* For further information on installation, please see the Fitment Guide in the Install tab. Drilling is required. Note: Under-rack accessories and some side-mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. For further information on installation, please see the fitment instructions in the INSTALL tab. KRVA008T - Volkswagen Amarok (2023-Current) Slimline II Roof Rack Kit/Low ProfileConsisting of:1x FAFR012 - Ford Rngr T6.2(22-Cur)VW Amark (23-Cur)Low Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.39kg (53.77lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 300mm (12")Shipping Weight:Weight: 30.27kg (67lbs)

This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). Drilling is required. All Front Runner Racks are backed by a limited lifetime warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.