FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack Wind Fairing -...
$152.10
$169.00
Smooth out your ride in Ford Ranger in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford Ranger .
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Ford Ranger Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1150mm (45.3") L x 161mm (6.3") W x 131mm (5.2") H
Weight:2.92kg (6.4lbs)
FRONT RUNNER Ford Ranger 5' (2012-2022) Slimline Ii Load Bed...
$1,669.50
$1,855.00
Haul more with this full-size, tough-as-nails Ford Ranger rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford Ranger truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Bakkie Load Bed Tracks / 1000mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.4kg (64.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18.0")Length: 1725mm (68.0")Height: 290mm (11.0")
Shipping Weight:30.4kg (67.0lbs)
FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Slimline Ii...
$1,680.30
$1,867.00
Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range.
This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.53kg (65.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger Retrax Xr 6In (2019-2022) Slimline Ii...
$1,977.30
$2,197.00
Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range.
This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.4kg (64.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 34kg (75lbs)
FRONT RUNNER Ford Ranger Single Cab Swb Pickup Truck (1993-1998)...
$2,093.40
$2,326.00
Double up the cargo-hauling space on your Ford Ranger Single Cab SWB Pickup Truck with this robust load bed rack. This rack was designed especially for single cab pickup trucks and creates a full-size Slimline II rack that sits above your Ranger’s load bed. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to haul all manner of loads and customize your setup with over 55 accessories to suit your lifestyle, travel and adventure-sports needs.
This kit creates a full-size rack that sits above your Ford Ranger Single Cab SWB Pickup Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1762mm), 2 Tracks, and 6 Pickup Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)1x TRAC010 - Universal Track Non Drilled / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33kg (72.75lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1830mm (72")Height: 280mm (11")Shipping Weight:Weight: 36kg (79lbs)
FRONT RUNNER Ford Ranger T6 4Th Gen Extended Cab (2012-2022)...
$1,115.10
$1,239.00
Gear up your Ford Ranger T6 4th Gen Extended Cab for any adventure with the Slimline II Roof Rack. This versatile, off-road tough roof rack is compatible with a wide range of accessories which allows you to customize it to suit your lifestyle, adventure sport, and travels. This particular roof rack kit features Low Profile Foot Rails to help minimize drag when carrying loads, which could make it more fuel-efficient.
This 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFR009 - Ford Ranger T6 4Gen ExCab(2012-Curr)Foot Rails/Low1x RRSTD05 - SLII Tray - 1255mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 20.69kg (45.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 165mm (6")Shipping Weight:Weight: 21kg (46lbs)
FRONT RUNNER Ford Ranger (2012-2019) Lockable Under Seat Storage Compartment...
$373.50
$415.00
Keep your passports, cash, travel documents and mobile devices out of sight and locked tightly in this all-steel safe, located neatly under the rear seats of the Ford Ranger T6 double-cab. Don’t worry about theft while on vacation ever again.
A lockable and hidden safe storage space is a must when travelling with cash, passports, travel documents or mobile devices.
Mounts out of sight under the rear seat, yet is easily accessible.
The set includes both left- and right-hand safes for the voids underneath the rear seats.
Manufactured from black powder coated 14-gauge thick steel.
A must-have when camping in remote locations without visible security.
Fitting instructions and hardware included.
Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Note: This storage compartment is not suitable for the US Spec Ford Ranger.
Consists of:1 x Left Hand Safe1 x Right Hand Safe2 x Cam Locks Incl. 2 keys per lockInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:Left Hand Safe:485mm (19.1") L x 265mm (10.4") W x 5mm (0.2") HRight Hand Safe:490mm (19.3") L x 376mm (14.8") W x 5mm (0.2") HWeight:5.5kg (12.1lbs)
FRONT RUNNER Ford Ranger (2012-Current) Egr Rolltrac Load Bed Load...
$546.30
$607.00
Clear your bed space and still haul your adventure gear and toys over your Ford Ranger load bed when fitted with an EGR RollTrac roll cover.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK017 - Roof Load Bar Pair 1475mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.08kg (17.81lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1590mm (63")Height: 160mm (6")Shipping Weight:Weight: 8.4kg (18lbs)
FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Double Load...
$537.30
$597.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Ford Ranger when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1500mm (59")Height: 155mm (6")Shipping Weight:Weight: 8kg (18lbs)
FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Triple Load...
$811.80
$902.00
Double up the loading space on your Ford Ranger with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Ranger .
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1560mm (61")Height: 230mm (9")Shipping Weight:Weight: 12kg (26lbs)
FRONT RUNNER Ford Ranger Retrax Xr 6In (2019-2022) Triple Load...
$811.80
$902.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK020 - Roof Load Bar Set 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8kg (17.64lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1560mm (61")
Height: 230mm (9")
Shipping Weight:
Weight: 12kg (26lbs)
FRONT RUNNER Ford Ranger T6 Winch Plate - WPFR001
$526.50
$585.00
A heavy duty winch plate that allows you to securely fasten a winch to your Ford Ranger T6's chassis, behind the original bumper. This easy to install plate supports most popular winch brands and sizes.
Specifically designed for the Ford Ranger T6.
Supports all popular winch sizes (8 000lbs (3.6t) - 10 000lbs (4.5t)).
Bolts directly to vehicle chassis with supplied hardware.
Fitted behind the original factory bumper, the winch plate and winch is hidden.
Allows access to the winch free spool lever.
Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
*Please Note: This Winch Plate does not work with Ford Ranger T6 models with Tech Pak Adaptive Cruise Control and Wildtrak models.
Consists of:1 x Winch PlateHardware KitFitting InstructionsMaterials used:Black powder coated 8mm mild steelProduct Dimensions:210mm (8.3") L x 971mm (38.2") W x 195mm (7.7") HWeight:17.6Kg (38.8lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak Double Cab W/Oem Roll...
$1,467.00
$1,630.00
This kit creates a full-size rack that sits above your Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 DOES NOT have a standard OEM Roll Top, Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR024T - Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit
Consisting of:
3x FASS016 - Flat Feet (pair) / 65mm
3x RRAC962 - Track Mount Stud Plate
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.94kg (52.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Length = 1720mm
Width = 1445mm
Height = 250mm
Shipping Weight:
Weight = 29kg
FRONT RUNNER Ford Ranger T6/Wildtrak 3Rd Gen (2012-2019) Slimline Ii...
$1,489.50
$1,655.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFR007T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR003 - Ford Ranger T6/Wildtrak (2012-2019) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger Wildtrak (2014-2022) Roll Top Slimline Ii...
$1,598.40
$1,776.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT032T - Ford Ranger Wildtrak (2014-Curr) Roll Top Slimline II Load Bed Rack Kit / Tall - by Front Runner
Consisting of:
3x LASS033 - Pick Up Roll Top Leg Mount / Tall (Pair)
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.56kg (62.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.8kg (63lbs)
FRONT RUNNER Polaris Ford Ranger Slimline Ii Load Bed Rack...
$1,422.90
$1,581.00
This kit creates a full-size rack that sits above your Polaris Ranger load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 752mm) and 4 Pickup Truck Bed Universal Legs that fit into the Load Bed Mount.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRPR002T - Polaris Ranger Slimline II Load Bed Rack Kit
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LASS043 - Polaris Ranger Load Bed Mount
1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.9kg (54.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 31kg (68lbs)
FRONT RUNNER Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab...
$2,139.30
$2,377.00
This 2166mm/85.3 full-size Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and a set of Foot Rails to mount the Slimline II Tray to the 5th Gen Toyota 4Runner. Easily install using the eight existing factory mounting points. Drilling and no drilling mounting options are included to secure the front Foot Rails.
All Front Runner Rack Kits contain installation instructions and all the necessary components to mount the Slimline II Tray to your vehicle.
The vehicle-specific Foot Rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF054T - Toyota 4Runner (5th Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FATF006 - Toyota 4runner (2009-Current) Full Rack Foot Rails1x RRAC961 - Toyota 4Runner (5th Gen) No Drill Installation Kit1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.379kg (91.22lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 41.84kg (92lbs)
FRONT RUNNER Slimline Ii Load Bed Rack Kit Fits Ford...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Ford Ranger's (1998-2012) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRFR001T - Ford Ranger Bakkie (1998-2012) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.77kg (61.22lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 29.54kg (65lbs)
FRONT RUNNER Slimline Ii Load Bed Rack Kit Fits Ford...
$1,525.50
$1,695.00
This kit creates a full size rack that sits above your Ford Ranger Super Cab 2-Door 1998-2012 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRFR002T - Ford Ranger Super Cab 2-Door Pickup (1998-2012) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.1lbs)
DIRECTION-PLUS Fuel Manager Pre-Filter+Catch Can Kit Everest Ford Ranger Bi-Turbo...
$681.30
$757.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
Direction Plus™ Fuel Manager Pre-Filter + Provent Ultimate Catch Can Dual Kit – FMPV664DPK is designed and engineered in Australia to suit:
Ford Everest YNWS (2.0L 4cyl) 2018-2022
Ford Ranger YNWS (2.0L 4cyl) 2019-2022
HOW DOES IT WORK?
FUEL MANAGER PRE-FILTER
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Post-Filter + Provent Dual Kit Ford Ranger...
$666.90
$741.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV661DPK is designed and engineered in Australia to suit:
Ford Ranger P4AT (2.2L 4cyl) 2011-2020
Ford Ranger P5AT (3.2L 5cyl) 2011-2022
Ford Everest P5AT (3.2L 5cyl) 2015-2022
Mazda BT-50 P4AT (2.2L 4cyl) 2011-2018
Mazda BT-50 P5AT (3.2L 5cyl) 2011-2021
HOW DOES IT WORK?
FUEL MANAGER POST-FILTER
Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!!
THE SOLUTION
To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system
BENEFITS OF A FUEL MANAGER POST-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
*Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Preline-Plus Pre-Filter Kit Next-Gen Ford Ranger / Everest &...
$480.60
$534.00
Direction-Plus™ PreLine-Plus PL671DPK is an innovative pre-filter system for diesel fuel which is designed and engineered in Australia to suit: Ford Next Gen Everest & Ranger models.
UPDATE: Version 2 bracket released November 2023 now compatible for Touring & Premium Pack options with Auxilliary 6 switch pack (overhead switches)
This kit fits:
Ford Next-Gen Ranger & Everest (BF2S 3.0L 6cyl) 2022- On
Compatible with Dual Battery Systems
Ford Next-Gen Ranger & Everest (YN2S 2.0L 4cyl) 2022- On
Compatible with Dual Battery Systems
VW Amarok Core & Life NF – (DXWA 3.0L 6cyl) 2023- On
Excludes Aventura, Panamericana & Style due to different battery tray
VW Amarok Core & Life NF – (DXK 2.0L 4cyl) 2023-On
Excludes Aventura, Panamericana & Style due to different battery tray
PROTECT YOUR ENGINE
PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation.
WATER SEPARATION EFFICIENCY
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced.
WATER ALERT SYSTEM
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT:
Remote multi-stage water alert system (visual and audible)
100% water separation efficiency (based on 150μm droplet size)
98% particle separation (based on 30 micron particles)
Reliable protection from corrosion and abrasion
No need to visually check for water – included alarm
Simple spin on style filter
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Post-Filter Kit Ford Ranger / Everest Bi-Turbo...
$413.10
$459.00
Direction Plus™ Fuel Manager Post-Filter Kit (PF664DPK) is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022
Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022
Ford Ranger Raptor YN2S (2.0L 4cyl) 2018 – 2022
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Post-Filter Kit Everest / Ford Ranger /...
$387.90
$431.00
Direction Plus™ Fuel Manager Post-Filter Kit PF621DPK is designed and engineered in Australia to suit Ford Everest / Ranger and Mazda BT-50 models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest P5AT (3.2L 5cyl) 2015 – 2022
Ford Ranger P5AT (3.2L 5cyl) 2015 – 2022
Ford Ranger P4AT (2.2L 4cyl) 2011 – 2022
Mazda BT-50 P5AT (3.2L 5cyl) 2011 – 2021
Mazda BT-50 P4AT (2.2L 4cyl) 2011 – 2018
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Ryco Pre-Filter Kit Ford Ranger / Everest / Bt-50...
$387.00
$430.00
Direction Plus™ Ryco Pre-Filter Kit RC661DPK is designed, engineered & assembled in Australia to suit Ford Ranger and Mazda BT-50 models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
This kit fits: Dual passenger side mounting location
Ford Everest P5AT (3.2L 5cyl) 2015 – 2022
Ford Ranger P5AT (3.2L 5cyl) 2015 – 2022
Ford Ranger P4AT (2.2L 4cyl) 2011 – 2020
Mazda BT-50 P5AT (3.2L 5cyl) 2011 – 2021
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Ford Next Gen...
$693.90
$771.00
The TransChill Arctic Black Transmission cooler kit TCB671DPK fits:
Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On
Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On
This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Ford Ranger, Everest...
$659.70
$733.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB621DPK fits Ford Ranger, Everest and Mazda BT-50 P5AT (3.2L 5cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Fuel Manager Pre-Filter Kit Ford Ranger / Everest Bi-Turbo...
$418.50
$465.00
Direction Plus™ Fuel Manager Pre-Filter Kit FM664DPK is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022PROTECT YOUR ENGINEIt’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
HOW IT WORKSInstalling a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even
when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Provent Ultimate Catch Can Kit Next Gen Ford Ranger...
$464.40
$516.00
PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION
The Direction-Plus™ Provent Ultimate Catch Can Kit (PV672DPK) is designed and engineered in Australia to suit:
Ford Next-Gen Ranger & Everest (YN2S 2.0L 4cyl) 2022- On
VW Amarok NF – (DXK 2.0L 4cyl) 2023-On
The ProVent Ultimate Catch Can kit PV672DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
PROTECTS AGAINST COSTLY REPAIRS AND POOR PERFORMANCE
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
DOESN’T VOID YOUR WARRANTY!
If you are wondering about your vehicle’s warranty, you don’t need to worry about it, because this kit doesn’t void any vehicle’s warranties. You can read an article from AAAA about Genuine Parts and Vehicle Warranty HERE.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
*Only in installations where the oil is returned to the sump
DIRECTION-PLUS Provent Ultimate Catch Can Kit Next Gen Ford Ranger...
$404.10
$449.00
PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION
Direction-Plus ProVent Ultimate Catch Can kit PV671DPK is designed and engineered in Australia to suit:
Ford Next Gen Everest (BF2S 3.0L 6cyl) 2022-On
Ford Next Gen Ranger (BF2S 3.0L 6cyl) 2022-On
VW Next Gen Amarok NF – (DXWA 3.0L 6cyl) 2023-On
The ProVent Ultimate Catch Can kit PV671DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
PROTECTS AGAINST COSTLY REPAIRS AND POOR PERFORMANCE
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
DOESN’T VOID YOUR WARRANTY!
If you are wondering about your vehicle’s warranty, you don’t need to worry about it, because this kit doesn’t void any vehicle’s warranties. You can read an article from AAAA about Genuine Parts and Vehicle Warranty HERE.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
*Only in installations where the oil is returned to the sump
MSA 4X4 Power Fold Towing Mirrors For Ford Ranger Py...
$1,529.10
$1,699.01
MSA 4X4 POWER FOLD TOWING MIRRORS FOR FORD RANGER PY & EVEREST UB-TM2650
MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.
Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.
The mirror is the subject of Chinese utility model No. 201721652844.X and international patent application No. PCT/AU2017/051320, as well as corresponding patents and patent applications in Australia, Belgium, Canada, China, France, Germany, the Netherlands, New Zealand, South Africa, Spain, the United Kingdom and the United States of America. The mirror is also the subject of international patent application No. PCT/AU2020/050810, as well as corresponding patents and patent applications in Australia, Canada, China, Europe, New Zealand, South Africa and the United States of America. The shape of the mirror is protected by Australian design registration No. 201715134 and Chinese design registration No. 201830077185.5.
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES: MSA 4X4’s 5 Year Warranty
NOTE: AM Radio reception may not be available
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!
MSA 4X4 Non Power Fold Black Towing Mirrors For Ford...
$837.90
$931.00
MSA 4X4 NON POWER FOLD BLACK TOWING MIRRORS FOR FORD RANGER PY -TM2600
MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.
Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.
The mirror is the subject of Chinese utility model No. 201721652844.X and international patent application No. PCT/AU2017/051320, as well as corresponding patents and patent applications in Australia, Belgium, Canada, China, France, Germany, the Netherlands, New Zealand, South Africa, Spain, the United Kingdom and the United States of America. The mirror is also the subject of international patent application No. PCT/AU2020/050810, as well as corresponding patents and patent applications in Australia, Canada, China, Europe, New Zealand, South Africa and the United States of America. The shape of the mirror is protected by Australian design registration No. 201715134 and Chinese design registration No. 201830077185.5.
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES: MSA 4X4’s 5 Year Warranty
NOTE: AM Radio reception may not be available
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!
MSA 4X4 Ford Ranger Px Dual Cab + Mazda Bt50...
$781.20
$868.00
Suits Ranger PX Dual Cab + BT50 Dual Cab XTR/XT
MSA 4x4 Ranger PX Dual Cab + BT50 Dual Cab Front & Rear Seat Covers- FRT546CO
SUITS: Ranger PX 10/2011 - 05/2015 + BT50 08/2011 - 04/2015
Complete front and second row seat set - (FRT504 + FRT506)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Px2 Inc.+ Mazda Bt50 Xtr Dual...
$828.00
$920.00
MSA 4x4 Ranger PX2 Inc.+ BT50 XTR Dual Cab Front & Rear Seat Covers- FRT5167CO
SUITS: Ranger PX2 Inc. Facelift Model Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + BT50 XTR Dual Cab (Facelift) Series 2 Dual Cab XTR/XT
Complete front and second row seat set - (FRT516 + FRT507)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Pj/Pk + Mazda Bt50 Dx Front...
$458.10
$509.00
MSA 4x4 Ranger PJ/PK + BT50 DX Front Seat Covers- FRT511
SUITS: Ranger PJ/PK + BT50 DX
Front twin bucket airbag seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Pj/Pk + Mazda Bt50 Front Seat...
$379.80
$422.00
MSA 4x4 Ranger PJ/PK + BT50 Front Seat Covers- FRT502
SUITS: Ranger PJ/PK + BT50
Includes: Front Seat Covers
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger & Mazda Bt50 Single Cab Front...
$458.10
$509.00
MSA 4x4 Ranger & BT50 Single Cab Front Seat Covers- FRT516
SUITS:
Ranger PX2 (08/16-07/19) Inc. Facelift Model Dual Cab/XLT +Ranger PX2 (08/16-07/19) Inc. Facelift Model Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + BT50 (06/18-09/20) XT Dual Cab (Facelift) + BT50 (06/18-09/20) XTR Dual Cab/Freestyle Cab (Facelift) + BT50 (01/17-05/18) Series 2 Dual Cab XTR/XT/Freestyle XTR/XT Single Cab
Includes: Front twin bucket airbag seats with driver side only lumbar lever, console cover and integrated lumbar support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Px3 Dual Cab Front & Second...
$828.00
$920.00
MSA 4x4 Ranger PX3 Dual Cab Front & Second Row Seat Covers - 21022
Complete front and second row seat set - (21018 + 21021)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Py Xl/Xls Single Cab, Super/Dual Cab...
$458.10
$509.00
MSA 4x4 Ranger PY XL/XLS Single Cab, Super/Dual Cab Front Seat Covers -21041
Single, Super & Dual Cab XL/XLS Driver x 2 Airbags, Passenger x 1 Airbag with Console
Cover and Integrated Lumber Support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Py Dual Cab Xl/Xls Rear Seat...
$363.60
$404.00
MSA 4x4 Ranger PY Dual Cab XL/XLS Rear Seat Covers- 21042
Dual Cab XL/XLS Bench Seat with 3 x Head Rests and No Armrest, Child Seat Holes on Base
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Left Storage Drawer System - 41014
$1,444.51
$1,605.01
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Ford Ranger & Mazda Bt50 Right Storage Drawer...
$1,437.30
$1,597.00
MSA RANGER & BT50 RIGHT STORAGE DRAWER SYSTEM-E1350-BT50-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Suits Ford Ranger PX, PX2, PX3 & Mazda BT50 UP, UR
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Ford Ranger Px3 Dual Cab Front & Rear...
$718.20
$798.00
VEHICLE DATE: 07/2019 - 05/2022
PRODUCT TYPE: Canvas Seat covers
SUITS: Ranger PX3 Dual Cab XL/XLS/XLT/Wildtrak
Complete front and rear row seat set - (21018 + 21019)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA 4X4 Ford Ranger Py Xl/Xls/Xlt Front & Second Row...
$828.00
$920.00
VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PY XL/XLS/XLT/Wildtrak Dual Cab
XLT/Sport/Wildtrak Complete Front and Second Row - (21044 + 21045)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA 4X4 Ford Ranger Py Xlt/Sport/Wildtrak Dual Cab Front Seat...
$458.10
$509.00
VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PY XLT/Sport/Wildtrak Dual Cab
XLT/Sport/Wildtrak Driver x 2 Airbags, Passenger x 1 Airbag with Console Cover and Integrated Lumber Support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA 4X4 Ford Ranger Px3 Dual Cab Xl/Xls/Xlt/Wildtrak Rear Seat...
$413.10
$459.00
VEHICLE DATE: 07/2019 - 05/2022
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PX3 Dual Cab XL/XLS/XLT/Wildtrak
Rear full width bench seat with 3 headrests
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA 4X4 Ford Ranger Py Dual Cab Xl/Xls Front &...
$781.20
$868.00
VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PY Dual Cab XL/XLS
Dual Cab XL/XLS Complete Front and Second Row - (21041 + 21042)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
DIRECTION-PLUS Tr+ Throttle Controller Unit Suits Ranger - TR0833DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0833DP fits Ford Ranger WEAT / WLAT (2007-2011) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Provent Oil Separator Kit Ford Ranger - PV665DPK
$358.20
$398.00
Direction-Plus™ ProVent® oil separator kit PV665DPK suits Ford Ranger P5AT model and it is mounted on the radiator support panel. The ProVent® oil separator kit PV665DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
HOW IT WORKS
Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
FORD Ranger & Mazda Bt50 Dual Cab Rear Full Width...
$413.10
$459.00
Ranger PX2 (08/16-07/19) Inc. Facelift Model Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + Ranger PX2 (05/15-07/16) Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + BT50 (06/18-09/20) XTR Dual Cab (Facelift) + BT50 (01/17-05/18) Series 2 Dual Cab XTR/XT/Freestyle XTR/XT Single Cab + BT50 (05/15-12/16) Series 2 Dual Cab XTR/XT/Freestyle XTR/XT Single Cab
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
