Polyair
POLYAIR Standard Bellows Airbag Kit, Ford Ranger - 88277
$864.00
$960.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-100psi- Built with a superior 2-ply fabric reinforced rubber- Ultra high strength & corrosion proof Zytel ® Nylon end caps- Most popular kits do not require drilling into the chassis- Easy to install with illustrated instructions- Quick connecting, easy to use air fittings.- Kits designed for standard height and raised applications- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford Ranger, Next Gen T6.2 (2022 - Current)
Polyair
POLYAIR Standard Bellows Airbag Kit, Ford Ranger - 85126
$765.00
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger 2007-2011 - PK 2WD, and Ford - Ranger 2007-2011 - PK 4WD
Mazda - BT50, Mazda - BT50 2007 - 2011, 2WD, - BT50 2007 - 2011, 4WD
Polyair
POLYAIR Standard Bellows Airbag Kit, Ford Ranger - 85104
$765.00
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger 2007-2011 - PK 2WD
Holden - Rodeo RA 2003 - 2008, 4 CYLINDER - 2WD
Mazda - BT50 2007 - 2011, 2WD
Toyota - HIACE H200, 2005 - 2019, LEAF SPRING
Polyair
POLYAIR Offroad Bellows Airbag Kit, Ford Ranger - 88277OR
$1,008.00
$1,120.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford Ranger, Next Gen T6.2 (2022 - Current)
Polyair
POLYAIR 2" Lift Bellows Airbag Kit, Ford Ranger - 88227-2R
$864.00
$960.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger (T6) PX1, PX2, PX3 - 2011 - 2022, 4WD (& 2WD HI-RIDE)
Mazda - BT50 2012-2020, 4WD (& 2WD HI-RIDE)
Polyair
POLYAIR 2" Lift Bellows Airbag Kit, Ford Ranger - 85126R
$765.00
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger 2007-2011 - PK 2WD, and Ford - Ranger 2007-2011 - PK 4WD
Mazda - BT50, Mazda - BT50 2007 - 2011, 2WD, - BT50 2007 - 2011, 4WD
Polyair
POLYAIR 2" Bellows Airbag Kit, Ford Ranger - 88277R
$864.00
$960.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford Ranger, Next Gen T6.2 (2022 - Current)
MSA
MSA 4X4 Ford Ranger Right Storage Drawer System - 41015
$1,444.51
$1,605.01
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA Ford Ranger Towing Mirrors (2015-May 2022) - TM605
$789.30
$877.00
DESIGNED & TESTED FOR TOWING!
Towing Mirrors no longer need to look ugly.
The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror adjuster. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.
The MSA 4x4 patented Towing Mirrors are manufactured extremely tough and WILL NOT VIBRATE ON TOUGH ROADS! Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
MSA
MSA Ford Ranger Towing Mirrors (Black Heated) 2012-Current - TM600
$837.90
$931.00
FORD RANGER - TOWING MIRRORS (BLACK HEATED) 2012-CURRENT Year: 2012-CURRENT Model: FORD RANGER / Black / Heated / Electric / No Indicators
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included: 1 x Left hand side mirror 1 x Right hand side mirror 1 x Installation instructions
SPECIFICATIONS: Weight: 14 kg Freight Dimensions: 54 × 53 × 31 cm
MSA
MSA Ford Ranger Towing Mirrors (Chrome Heated Electric Indicators) 2012-Current - TM603
$888.30
$987.00
Year: 2012- May 2022
Model: Ford Ranger
Part Number: TM603
Have you got a Ford Ranger from 2012 onwards, and you're keen on towing like a boss?
We've got just the upgrade you need – Introducing our MSA Ford Ranger Towing Mirrors with Chrome Heated Electric Indicators, the pinnacle of style and functionality. Designed to fit Ford Ranger models from 2012 to May 2022, these mirrors are engineered for excellence, ensuring you have complete control and visibility while towing.
Let's talk about the chrome finish with heated electric indicator features. These mirrors look great and have heated indicators that are bloody fantastic when you're out there in all kinds of weather—no more fogged-up or iced-over mirrors. You'll have a clear view no matter the weather.
These mirrors offer four different adjustable positions. That means you can fine-tune your view to suit any towing scenario, whether on the highway or navigating tight spaces. You've got plenty of options.
But that's not all. You can adjust the viewing angles to get that crystal-clear line of sight. Up, down, left, right – you can set it just the way you like it. It'll make your towing experience as smooth as a cold one on a hot day.
These mirrors also have vertical and horizontal adjustment options to your specific height and seated position. Ensuring you've got a clear view from your driver's seat.
They also have a unique pivot design. These mirrors pivot like nothing else. Extend out when you're towing and snappin' back in when you're not. It's all about keepin' things practical and easy.
So, upgrade your Ford Ranger towing game with these MSA Towing Mirrors. They're fair dinkum, built for Aussie conditions, and backed by our commitment to quality.
Feature and Specs
Weight: 14 kg
Freight Dimensions: 54 × 53 × 31 cm
Chrome Heated Electric Indicators
Four Adjustable Mirror Positions
Vertical and Horizontal Adjustment
Unique Pivot Design
Designed to fold inwards or outwards
ADR Compliant: Tested and approved
Simple to fit – mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror
Slightly curved glass for even more vision
Designed for towing caravans, camper trailers, trailers, boats and horse floats
5-Year Warranty
Included:
1 x Left-hand side mirror
1 x Right-hand side mirror
1 x Installation instructions
TJM Northern Beaches Expert Tip – Towing can be challenging, but with the right mirrors, it becomes a breeze. Adjust your MSA Towing Mirrors for a clear view of your caravan, trailer, or boat, and enjoy safe and stress-free journeys.
What others are saying about this product
‘’These are fantastic, no worries now about losing clip-on mirrors, exactly what we expected, a lot more vision now.’’
MSA
MSA Ford Ranger Pj / Pk Rear Full Width Bench (Including Armrest Cover) Seat Cover - FRT505
$297.90
$331.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Rear
MSA
MSA Ford Ranger Pj / Pk Front Full Width Bench Seat Cover - FRT509
$297.90
$331.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Front
MSA
MSA Ford Ranger Pj / Pk Front Full Width Bench (Including Armrest Cover) Seat Cover - FRT503
$391.50
$435.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Front
MSA
MSA Ford Ranger Px Rear Full Width Bench Seat Cover - FRT506
$363.60
$404.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Rear
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
