POLYAIR Standard Bellows Airbag Kit, Ford Ranger - 88277
$960.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-100psi- Built with a superior 2-ply fabric reinforced rubber- Ultra high strength & corrosion proof Zytel ® Nylon end caps- Most popular kits do not require drilling into the chassis- Easy to install with illustrated instructions- Quick connecting, easy to use air fittings.- Kits designed for standard height and raised applications- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford Ranger, Next Gen T6.2 (2022 - Current)
POLYAIR Standard Bellows Airbag Kit, Ford Ranger - 85126
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger 2007-2011 - PK 2WD, and Ford - Ranger 2007-2011 - PK 4WD
Mazda - BT50, Mazda - BT50 2007 - 2011, 2WD, - BT50 2007 - 2011, 4WD
POLYAIR Standard Bellows Airbag Kit, Ford Ranger - 85104
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger 2007-2011 - PK 2WD
Holden - Rodeo RA 2003 - 2008, 4 CYLINDER - 2WD
Mazda - BT50 2007 - 2011, 2WD
Toyota - HIACE H200, 2005 - 2019, LEAF SPRING
POLYAIR Offroad Bellows Airbag Kit, Ford Ranger - 88277OR
$1,120.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford Ranger, Next Gen T6.2 (2022 - Current)
POLYAIR 2" Lift Bellows Airbag Kit, Ford Ranger - 88227-2R
$960.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger (T6) PX1, PX2, PX3 - 2011 - 2022, 4WD (& 2WD HI-RIDE)
Mazda - BT50 2012-2020, 4WD (& 2WD HI-RIDE)
POLYAIR 2" Lift Bellows Airbag Kit, Ford Ranger - 85126R
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - Ranger 2007-2011 - PK 2WD, and Ford - Ranger 2007-2011 - PK 4WD
Mazda - BT50, Mazda - BT50 2007 - 2011, 2WD, - BT50 2007 - 2011, 4WD
POLYAIR 2" Bellows Airbag Kit, Ford Ranger - 88277R
$960.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Most popular kits do not require drilling into the chassis
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford Ranger, Next Gen T6.2 (2022 - Current)
MSA 4X4 Ford Ranger Right Storage Drawer System - 41015
$1,444.50
$1,605.00
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA Chrome Towing Mirrors Ford Ranger, 2012 - May 2022...
$789.30
$877.00
Ford Ranger, 2012 - May 2022 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM605
Suits
Ford Ranger, 2012 - May 2022
Colour
Chrome
Type
Non Power Fold
Key Features
Electric – Electric mirror adjustment from inside the cabin
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Specifications
Mirror Type: Towing Mirror (Non Power Fold)
Vehicle Fitment: Ford Ranger, 2012 - May 2022
Colour: Chrome
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM605
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Black Towing Mirrors Ford Ranger, 2012 - May 2022...
$837.90
$931.00
Ford Ranger, 2012 - May 2022 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM600
Suits
Ford Ranger, 2012 - May 2022
Colour
Black
Type
Non Power Fold
Key Features
Electric – Electric mirror adjustment from inside the cabin
Heated (No Indicators)
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Specifications
Mirror Type: Towing Mirror (Non Power Fold)
Vehicle Fitment: Ford Ranger, 2012 - May 2022
Colour: Black
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM600
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Chrome Towing Mirrors Ford Ranger, 2012- May 2022 Electric,...
$888.30
$987.00
Ford Ranger, 2012- May 2022 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM603
Suits
Ford Ranger, 2012- May 2022
Colour
Chrome
Type
Non Power Fold
Key Features
Electric – Electric mirror adjustment from inside the cabin
Heated – Heated mirror glass to demist in cold or wet conditions
Indicators – Integrated indicators for improved road visibility
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Specifications
Mirror Type: Towing Mirror (Non Power Fold)
Vehicle Fitment: Ford Ranger, 2012- May 2022
Colour: Chrome
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM603
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Ford Ranger Pj / Pk Front Full Width Bench...
$391.50
$435.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Front
MSA Ford Ranger Px Rear Full Width Bench Seat Cover...
$458.10
$509.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Rear
MSA Ford Ranger Px2 Dc/ Sc/ Ssc/ Xlt/ Xl/ Xls...
$828.00
$920.00
Weight: 6 kg
Freight Dimensions: 36 × 26 × 38 cm
Position: Complete
FATZ FABRICATION Ra Ford Ranger Short Entry Snorkel. Powder Coated...
$2,090.00
Fatz Built RA/Next Gen Ranger 4″ Snorkel
The Ford Ranger keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this vehicle. The short entry design of our 4″ Snorkel makes it a breeze to install, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we cap the factory inlet and create a new entry through the side of the airbox, located in an ideal location for snorkel coupling. A laser-cut plate ensures a watertight seal of the factory location, while the bead-rolled inlet pipe offers secure connection. The RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs within the factory mounting location and fill point. With everything you need included, our kit leaves no question marks over the installation process or whether you have all required for installation. Take your Ford Ranger Next Gen RA to the next level and breathe easy with the Fatz Built 4″ snorkel. Add our Airbox for V6 Model variants for a complete induction package. Contact one of our team members if you have any queries.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Ra Ford Ranger Short Entry Snorkel. Powder Coated...
$2,090.00
Fatz Built RA/Next Gen Ranger 4″ Snorkel
The Ford Ranger keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this vehicle. The short entry design of our 4″ Snorkel makes it a breeze to install, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we cap the factory inlet and create a new entry through the side of the airbox, located in an ideal location for snorkel coupling. A laser-cut plate ensures a watertight seal of the factory location, while the bead-rolled inlet pipe offers secure connection. The RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs within the factory mounting location and fill point. With everything you need included, our kit leaves no question marks over the installation process or whether you have all required for installation. Take your Ford Ranger Next Gen RA to the next level and breathe easy with the Fatz Built 4″ snorkel. Add our Airbox for V6 Model variants for a complete induction package. Contact one of our team members if you have any queries.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Ra Ford Ranger Short Entry Ram Head Snorkel....
$1,970.00
Fatz Fabrication RA Ranger Short Entry RAM HEAD Snorkel. Powder coated Texture Black. Suit Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-RM-TPC-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Ra Ford Ranger Short Entry Snorkel. Polished. Factory...
$1,970.00
Fatz Fabrication RA Ranger Short Entry Snorkel. Polished. Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-POL-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Ra Ford Ranger Short Entry Snorkel. Powder Coated...
$1,970.00
Fatz Fabrication RA Ranger Short Entry Snorkel. Powder coated Satin Black. Suit Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-SPC-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION High Flow Airbox For V6 Ra Ford Ranger...
$1,390.00
The RA Rangers 3L V6 Diesel engine at a stock power output of 184kW is a very impressive unit and the fitment of a Fatz built Airbox will only compliment and enhance the OEM Hardware. Our Airbox utilizes our Fatz built Air filters in a 9” long element, optioned in either an 8-layer gauze or paper element. The RA Ranger Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, Off Road filter designed and tested for all the duties you will put your Ranger through. This package will not only improve aesthetic of you engine bay, but will provide excellent filtration for Off-road use, allow easy plumbing in of Snorkels, provide a free flowing intake system that will support power upgrades. Compatible with all V6 RA ranger vehicles. The RA Airbox incorporates our latest generation of MAF sensor integration with our CNC machined MAF housing for accurate and neat MAF integration. All plumbing supplied for a bolt in solution.
Kit includes: Airbox with filter, Clear lid, instructions. *Snorkel compatibility only guaranteed with Fatz Built snorkel at release of product.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION High Flow Airbox For V6 Ra Ford Ranger...
$1,390.00
The RA Rangers 3L V6 Diesel engine at a stock power output of 184kW is a very impressive unit and the fitment of a Fatz built Airbox will only compliment and enhance the OEM Hardware. Our Airbox utilizes our Fatz built Air filters in a 9” long element, optioned in either an 8-layer gauze or paper element. The RA Ranger Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, Off Road filter designed and tested for all the duties you will put your Ranger through. This package will not only improve aesthetic of you engine bay, but will provide excellent filtration for Off-road use, allow easy plumbing in of Snorkels, provide a free flowing intake system that will support power upgrades. Compatible with all V6 RA ranger vehicles. The RA Airbox incorporates our latest generation of MAF sensor integration with our CNC machined MAF housing for accurate and neat MAF integration. All plumbing supplied for a bolt in solution.
Kit includes: Airbox with filter, Clear lid, instructions. *Snorkel compatibility only guaranteed with Fatz Built snorkel at release of product.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
HSP Tail Assist (Weight Reduction + Dampener) Ford Ranger Px...
$249.00
The Tail Gate Assist is a fantastic addition to a vehicles tailgate. Using a two-way strut system that dampens the weight while the tailgate is declining and reduces the weight when inclining. Utilising factory mounting points makes the installation a breeze as there is no need to remove the tailgate.
Features
– Dampens weight of the tailgate when declining.
– Reduces weight when inclining.
– Twin strut system.
– Non-Intrusive design.
Fitting
– Utilises Factory Mounting Points.
– Does not require the removal of your tailgate.
HSP Roll R Cover Series 3.5 Spacecab Suits Xlt Bar...
$3,400.00
What makes the S3.5 Roll R Cover So Special?
HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units
100% Australian Manufactured
Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally.
World First Triple Operation
The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation.
Your factory remote, yes that’s right your existing factory remote automatically controls the unit
A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked.
Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration.
Compatability
Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub.
Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added.
Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you.
Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go!
Horizon LED Light Bar
A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.
Super Simple Installation
Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points.
Water Protection
Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain.
Features
Manufacturing Quality: Compliant to ISO9001
Curtain Material: Aluminium
Side Rail Material: Aluminium
Finish: Powdercoated Mannix Black
LED Light
Voltage: 12v
Compliant with: EN 60529 Ed. 2.2:
2013: IP66
Remote Range: Same as Vehicle
Transmitter Coding: 220 constant rolling code
Warranty: 3 years
HSP Roll R Cover Series 3.5 Space Cab Suits Ford...
$3,300.00
What makes the S3.5 Roll R Cover So Special?
HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units
100% Australian Manufactured
Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally.
World First Triple Operation
The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation.
Your factory remote, yes that’s right your existing factory remote automatically controls the unit
A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked.
Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration.
Compatability
Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub.
Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added.
Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you.
Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go!
Horizon LED Light Bar
A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.
Super Simple Installation
Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points.
Water Protection
Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain.
Features
Manufacturing Quality: Compliant to ISO9001
Curtain Material: Aluminium
Side Rail Material: Aluminium
Finish: Powdercoated Mannix Black
LED Light
Voltage: 12v
Compliant with: EN 60529 Ed. 2.2:
2013: IP66
Remote Range: Same as Vehicle
Transmitter Coding: 220 constant rolling code
Warranty: 3 years
FRONT RUNNER Ford Ranger (2012-2022) Egr Rolltrac Slimline Ii Load...
$1,525.60
$1,907.00
Clear precious load bed space and still haul your adventure gear and toys on a full-sized bed rack with this Ford Ranger EGR RollTrac Slimline II Load Bed Rack Kit.
This kit creates a full-size rack that sits above your Ford Ranger's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.77kg (65.63lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 250mm (10")Shipping Weight:Weight: 31kg (68lbs)
FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack 40In Light Bar...
$135.20
$169.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for .
Allows fitment of 40" Front Runner light bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black Powder Coated Steel
Product Dimensions:1150mm (45.3") L x 160mm (6.3") W x 121mm (4.8") H
Weight:2.36kg (5.2lbs)
FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack Wind Fairing -...
$135.20
$169.00
Smooth out your ride in Ford Ranger in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford Ranger .
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Ford Ranger Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1150mm (45.3") L x 161mm (6.3") W x 131mm (5.2") H
Weight:2.92kg (6.4lbs)
FRONT RUNNER Ford Ranger 5' (2012-2022) Slimline Ii Load Bed...
$1,484.00
$1,855.00
Haul more with this full-size, tough-as-nails Ford Ranger rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford Ranger truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Bakkie Load Bed Tracks / 1000mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.4kg (64.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18.0")Length: 1725mm (68.0")Height: 290mm (11.0")
Shipping Weight:30.4kg (67.0lbs)
FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Slimline Ii...
$1,493.60
$1,867.00
Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range.
This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.53kg (65.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger Retrax Xr 6In (2019-2022) Slimline Ii...
$1,757.60
$2,197.00
Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range.
This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.4kg (64.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 34kg (75lbs)
FRONT RUNNER Ford Ranger Single Cab Swb Pickup Truck (1993-1998)...
$1,860.80
$2,326.00
Double up the cargo-hauling space on your Ford Ranger Single Cab SWB Pickup Truck with this robust load bed rack. This rack was designed especially for single cab pickup trucks and creates a full-size Slimline II rack that sits above your Ranger’s load bed. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to haul all manner of loads and customize your setup with over 55 accessories to suit your lifestyle, travel and adventure-sports needs.
This kit creates a full-size rack that sits above your Ford Ranger Single Cab SWB Pickup Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1762mm), 2 Tracks, and 6 Pickup Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)1x TRAC010 - Universal Track Non Drilled / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33kg (72.75lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1830mm (72")Height: 280mm (11")Shipping Weight:Weight: 36kg (79lbs)
FRONT RUNNER Ford Ranger T6 4Th Gen Extended Cab (2012-2022)...
$991.20
$1,239.00
Gear up your Ford Ranger T6 4th Gen Extended Cab for any adventure with the Slimline II Roof Rack. This versatile, off-road tough roof rack is compatible with a wide range of accessories which allows you to customize it to suit your lifestyle, adventure sport, and travels. This particular roof rack kit features Low Profile Foot Rails to help minimize drag when carrying loads, which could make it more fuel-efficient.
This 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFR009 - Ford Ranger T6 4Gen ExCab(2012-Curr)Foot Rails/Low1x RRSTD05 - SLII Tray - 1255mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 20.69kg (45.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 165mm (6")Shipping Weight:Weight: 21kg (46lbs)
FRONT RUNNER Ford Ranger (2012-2019) Lockable Under Seat Storage Compartment...
$332.00
$415.00
Keep your passports, cash, travel documents and mobile devices out of sight and locked tightly in this all-steel safe, located neatly under the rear seats of the Ford Ranger T6 double-cab. Don’t worry about theft while on vacation ever again.
A lockable and hidden safe storage space is a must when travelling with cash, passports, travel documents or mobile devices.
Mounts out of sight under the rear seat, yet is easily accessible.
The set includes both left- and right-hand safes for the voids underneath the rear seats.
Manufactured from black powder coated 14-gauge thick steel.
A must-have when camping in remote locations without visible security.
Fitting instructions and hardware included.
Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Note: This storage compartment is not suitable for the US Spec Ford Ranger.
Consists of:1 x Left Hand Safe1 x Right Hand Safe2 x Cam Locks Incl. 2 keys per lockInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:Left Hand Safe:485mm (19.1") L x 265mm (10.4") W x 5mm (0.2") HRight Hand Safe:490mm (19.3") L x 376mm (14.8") W x 5mm (0.2") HWeight:5.5kg (12.1lbs)
FRONT RUNNER Ford Ranger (2012-Current) Egr Rolltrac Load Bed Load...
$485.60
$607.00
Clear your bed space and still haul your adventure gear and toys over your Ford Ranger load bed when fitted with an EGR RollTrac roll cover.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK017 - Roof Load Bar Pair 1475mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.08kg (17.81lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1590mm (63")Height: 160mm (6")Shipping Weight:Weight: 8.4kg (18lbs)
FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Double Load...
$477.60
$597.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Ford Ranger when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1500mm (59")Height: 155mm (6")Shipping Weight:Weight: 8kg (18lbs)
FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Triple Load...
$721.60
$902.00
Double up the loading space on your Ford Ranger with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Ranger .
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1560mm (61")Height: 230mm (9")Shipping Weight:Weight: 12kg (26lbs)
FRONT RUNNER Ford Ranger Retrax Xr 6In (2019-2022) Triple Load...
$721.60
$902.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK020 - Roof Load Bar Set 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8kg (17.64lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1560mm (61")
Height: 230mm (9")
Shipping Weight:
Weight: 12kg (26lbs)
FRONT RUNNER Ford Ranger T6 Winch Plate - WPFR001
$468.00
$585.00
A heavy duty winch plate that allows you to securely fasten a winch to your Ford Ranger T6's chassis, behind the original bumper. This easy to install plate supports most popular winch brands and sizes.
Specifically designed for the Ford Ranger T6.
Supports all popular winch sizes (8 000lbs (3.6t) - 10 000lbs (4.5t)).
Bolts directly to vehicle chassis with supplied hardware.
Fitted behind the original factory bumper, the winch plate and winch is hidden.
Allows access to the winch free spool lever.
Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
*Please Note: This Winch Plate does not work with Ford Ranger T6 models with Tech Pak Adaptive Cruise Control and Wildtrak models.
Consists of:1 x Winch PlateHardware KitFitting InstructionsMaterials used:Black powder coated 8mm mild steelProduct Dimensions:210mm (8.3") L x 971mm (38.2") W x 195mm (7.7") HWeight:17.6Kg (38.8lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak Double Cab W/Oem Roll...
$1,304.00
$1,630.00
This kit creates a full-size rack that sits above your Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 DOES NOT have a standard OEM Roll Top, Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR024T - Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit
Consisting of:
3x FASS016 - Flat Feet (pair) / 65mm
3x RRAC962 - Track Mount Stud Plate
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.94kg (52.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Length = 1720mm
Width = 1445mm
Height = 250mm
Shipping Weight:
Weight = 29kg
FRONT RUNNER Ford Ranger T6/Wildtrak 3Rd Gen (2012-2019) Slimline Ii...
$1,324.00
$1,655.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFR007T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR003 - Ford Ranger T6/Wildtrak (2012-2019) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger Wildtrak (2014-2022) Roll Top Slimline Ii...
$1,420.80
$1,776.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT032T - Ford Ranger Wildtrak (2014-Curr) Roll Top Slimline II Load Bed Rack Kit / Tall - by Front Runner
Consisting of:
3x LASS033 - Pick Up Roll Top Leg Mount / Tall (Pair)
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.56kg (62.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.8kg (63lbs)