Fatz Fabrication
Fatz Fabrication VDJ70 Full intake kit from Fatz Airbox to Factory Turbo -FFVDJ-IN-STD-KT
$2,190.00
VDJ70 Series High Flow intake. Compatible with all VDJ70 Series Models fitted with 1VD-FTV engine. (Specify Turbo Fitted)
With the need to Increase power output comes the need for increase for Airflow. The factory design for the intake on the 70 series land cruiser leaves a lot to be desired with a turbo situated behind a large profile engine mount allowing no access for decent sized plumbing. We solve this issue with our revised engine mount bracket. Our mount design with a smaller profile enables us to get a 3” diameter tube all the way through to the turbo inlet for maximum air flow. We run the piping in seamless 4” stainless tube across the engine bay and down beside the radiator shroud. We then taper down to our calibrated MAF tube. This unique feature of our intake allows for install without immediate tuning. We then duct in 3” tube to the turbo inlet. We supply a piggy-back Harness to relocate the Mass Air Flow sensor wiring, so no cutting and soldering of important signal wiring is required. The snout of the turbo is replaced for a straight, Billet CNC machined custom snouts, supplied to suit different turbo inlet sizing. Supplied with all items needed for installation. This kit can be specified for use with Factory Airboxes or Fatz Built Airboxes to meet you specific needs. Our Fatz Built High Flow airbox can be added at check out to complete your intake package and ensure the filtration efficiency matches the performance of your intake package.
Purchase the Fatz Built VDJ High Flow Intake from Fatz Fabrication and experience market leading design and finish standards, with performance to match.
Kit includes: 4” Intake Piece with MAF mounting assembly, 3” alloy Intake Piece, 90 Degree -12 an – push lock fitting, Hose Clamps as required, VDJ Engine Mount, 4” Silicone 90 Bend, 3.25-3” Straight Silicone reducer, 3” silicone hose, joining coupling for silicone bends, Stainless bolts for turbo snout, Turbo snout (advise Turbo fitted), 3/4” Oil Hose Clamp for PCV integration, Piggy Back MAF wiring harness.
(Rendered images are for demonstration purposes only. Airbox is not supplied with intake. Actual surface finish may differ form renders).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication Dobinson 3.5"I.D Ram head (Secures to tube with s/s screws. Slides into snorkel...
$95.00
3.5″ Dobinson Ram Head. Compatible with all Fatz Built, Ram head snorkels.
3.5″ Dobinson Ram Head, suitable for use with all Fatz Built 4″ Ram head Snorkels. Slides into the top of the snorkel opening and secures with four stainless steel screws around the perimeter.
Fatz Fabrication
Fatz Fabrication VDJ70 Full intake kit from DUAL Fatz Airbox to Factory Turbo -FFVDJ-IN-DAB-STD-KT
$2,290.00
VDJ70 Series High Flow intake. Compatible with all VDJ70 Series Models fitted with 1VD-FTV engine. (Specify Turbo Fitted)
With the need to Increase power output comes the need for increase for Airflow. The factory design for the intake on the 70 series land cruiser leaves a lot to be desired with a turbo situated behind a large profile engine mount allowing no access for decent sized plumbing. We solve this issue with our revised engine mount bracket. Our mount design with a smaller profile enables us to get a 3” diameter tube all the way through to the turbo inlet for maximum air flow. We run the piping in seamless 4” stainless tube across the engine bay and down beside the radiator shroud. We then taper down to our calibrated MAF tube. This unique feature of our intake allows for install without immediate tuning. We then duct in 3” tube to the turbo inlet. We supply a piggy-back Harness to relocate the Mass Air Flow sensor wiring, so no cutting and soldering of important signal wiring is required. The snout of the turbo is replaced for a straight, Billet CNC machined custom snouts, supplied to suit different turbo inlet sizing. Supplied with all items needed for installation. This kit can be specified for use with Factory Airboxes or Fatz Built Airboxes to meet you specific needs. Our Fatz Built High Flow airbox can be added at check out to complete your intake package and ensure the filtration efficiency matches the performance of your intake package.
Purchase the Fatz Built VDJ High Flow Intake from Fatz Fabrication and experience market leading design and finish standards, with performance to match.
Kit includes: 4” Intake Piece with MAF mounting assembly, 3” alloy Intake Piece, 90 Degree -12 an – push lock fitting, Hose Clamps as required, VDJ Engine Mount, 4” Silicone 90 Bend, 3.25-3” Straight Silicone reducer, 3” silicone hose, joining coupling for silicone bends, Stainless bolts for turbo snout, Turbo snout (advise Turbo fitted), 3/4” Oil Hose Clamp for PCV integration, Piggy Back MAF wiring harness.
(Rendered images are for demonstration purposes only. Airbox is not supplied with intake. Actual surface finish may differ form renders).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Full intake kit from DUAL Fatz Airbox to G-Turbo G350-G500-FFVDJ-IN-DAB-GT-KT
$2,290.00
VDJ70 Series High Flow intake. Compatible with all VDJ70 Series Models fitted with 1VD-FTV engine. (Specify Turbo Fitted)
With the need to Increase power output comes the need for increase for Airflow. The factory design for the intake on the 70 series land cruiser leaves a lot to be desired with a turbo situated behind a large profile engine mount allowing no access for decent sized plumbing. We solve this issue with our revised engine mount bracket. Our mount design with a smaller profile enables us to get a 3” diameter tube all the way through to the turbo inlet for maximum air flow. We run the piping in seamless 4” stainless tube across the engine bay and down beside the radiator shroud. We then taper down to our calibrated MAF tube. This unique feature of our intake allows for install without immediate tuning. We then duct in 3” tube to the turbo inlet. We supply a piggy-back Harness to relocate the Mass Air Flow sensor wiring, so no cutting and soldering of important signal wiring is required. The snout of the turbo is replaced for a straight, Billet CNC machined custom snouts, supplied to suit different turbo inlet sizing. Supplied with all items needed for installation. This kit can be specified for use with Factory Airboxes or Fatz Built Airboxes to meet you specific needs. Our Fatz Built High Flow airbox can be added at check out to complete your intake package and ensure the filtration efficiency matches the performance of your intake package.
Purchase the Fatz Built VDJ High Flow Intake from Fatz Fabrication and experience market leading design and finish standards, with performance to match.
Kit includes: 4” Intake Piece with MAF mounting assembly, 3” alloy Intake Piece, 90 Degree -12 an – push lock fitting, Hose Clamps as required, VDJ Engine Mount, 4” Silicone 90 Bend, 3.25-3” Straight Silicone reducer, 3” silicone hose, joining coupling for silicone bends, Stainless bolts for turbo snout, Turbo snout (advise Turbo fitted), 3/4” Oil Hose Clamp for PCV integration, Piggy Back MAF wiring harness.
(Rendered images are for demonstration purposes only. Airbox is not supplied with intake. Actual surface finish may differ form renders).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Full intake kit from FACTORY Airbox to Factory Turbo -FFVDJ-IN-FAB-STD-KT
$2,090.00
VDJ70 Series High Flow intake. Compatible with all VDJ70 Series Models fitted with 1VD-FTV engine. (Specify Turbo Fitted)
With the need to Increase power output comes the need for increase for Airflow. The factory design for the intake on the 70 series land cruiser leaves a lot to be desired with a turbo situated behind a large profile engine mount allowing no access for decent sized plumbing. We solve this issue with our revised engine mount bracket. Our mount design with a smaller profile enables us to get a 3” diameter tube all the way through to the turbo inlet for maximum air flow. We run the piping in seamless 4” stainless tube across the engine bay and down beside the radiator shroud. We then taper down to our calibrated MAF tube. This unique feature of our intake allows for install without immediate tuning. We then duct in 3” tube to the turbo inlet. We supply a piggy-back Harness to relocate the Mass Air Flow sensor wiring, so no cutting and soldering of important signal wiring is required. The snout of the turbo is replaced for a straight, Billet CNC machined custom snouts, supplied to suit different turbo inlet sizing. Supplied with all items needed for installation. This kit can be specified for use with Factory Airboxes or Fatz Built Airboxes to meet you specific needs. Our Fatz Built High Flow airbox can be added at check out to complete your intake package and ensure the filtration efficiency matches the performance of your intake package.
Purchase the Fatz Built VDJ High Flow Intake from Fatz Fabrication and experience market leading design and finish standards, with performance to match.
Kit includes: 4” Intake Piece with MAF mounting assembly, 3” alloy Intake Piece, 90 Degree -12 an – push lock fitting, Hose Clamps as required, VDJ Engine Mount, 4” Silicone 90 Bend, 3.25-3” Straight Silicone reducer, 3” silicone hose, joining coupling for silicone bends, Stainless bolts for turbo snout, Turbo snout (advise Turbo fitted), 3/4” Oil Hose Clamp for PCV integration, Piggy Back MAF wiring harness.
(Rendered images are for demonstration purposes only. Airbox is not supplied with intake. Actual surface finish may differ form renders).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Full intake kit from FACTORY AIRBOX to G-Turbo G350-G500-FFVDJ-IN-FAB-GT-KT
$2,090.00
VDJ70 Series High Flow intake. Compatible with all VDJ70 Series Models fitted with 1VD-FTV engine. (Specify Turbo Fitted)
With the need to Increase power output comes the need for increase for Airflow. The factory design for the intake on the 70 series land cruiser leaves a lot to be desired with a turbo situated behind a large profile engine mount allowing no access for decent sized plumbing. We solve this issue with our revised engine mount bracket. Our mount design with a smaller profile enables us to get a 3” diameter tube all the way through to the turbo inlet for maximum air flow. We run the piping in seamless 4” stainless tube across the engine bay and down beside the radiator shroud. We then taper down to our calibrated MAF tube. This unique feature of our intake allows for install without immediate tuning. We then duct in 3” tube to the turbo inlet. We supply a piggy-back Harness to relocate the Mass Air Flow sensor wiring, so no cutting and soldering of important signal wiring is required. The snout of the turbo is replaced for a straight, Billet CNC machined custom snouts, supplied to suit different turbo inlet sizing. Supplied with all items needed for installation. This kit can be specified for use with Factory Airboxes or Fatz Built Airboxes to meet you specific needs. Our Fatz Built High Flow airbox can be added at check out to complete your intake package and ensure the filtration efficiency matches the performance of your intake package.
Purchase the Fatz Built VDJ High Flow Intake from Fatz Fabrication and experience market leading design and finish standards, with performance to match.
Kit includes: 4” Intake Piece with MAF mounting assembly, 3” alloy Intake Piece, 90 Degree -12 an – push lock fitting, Hose Clamps as required, VDJ Engine Mount, 4” Silicone 90 Bend, 3.25-3” Straight Silicone reducer, 3” silicone hose, joining coupling for silicone bends, Stainless bolts for turbo snout, Turbo snout (advise Turbo fitted), 3/4” Oil Hose Clamp for PCV integration, Piggy Back MAF wiring harness.
(Rendered images are for demonstration purposes only. Airbox is not supplied with intake. Actual surface finish may differ form renders).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Full intake kit from Fatz Airbox to G-Turbo G350-G500-FFVDJ-IN-GT-KT
$2,190.00
VDJ70 Series High Flow intake. Compatible with all VDJ70 Series Models fitted with 1VD-FTV engine. (Specify Turbo Fitted)
With the need to Increase power output comes the need for increase for Airflow. The factory design for the intake on the 70 series land cruiser leaves a lot to be desired with a turbo situated behind a large profile engine mount allowing no access for decent sized plumbing. We solve this issue with our revised engine mount bracket. Our mount design with a smaller profile enables us to get a 3” diameter tube all the way through to the turbo inlet for maximum air flow. We run the piping in seamless 4” stainless tube across the engine bay and down beside the radiator shroud. We then taper down to our calibrated MAF tube. This unique feature of our intake allows for install without immediate tuning. We then duct in 3” tube to the turbo inlet. We supply a piggy-back Harness to relocate the Mass Air Flow sensor wiring, so no cutting and soldering of important signal wiring is required. The snout of the turbo is replaced for a straight, Billet CNC machined custom snouts, supplied to suit different turbo inlet sizing. Supplied with all items needed for installation. This kit can be specified for use with Factory Airboxes or Fatz Built Airboxes to meet you specific needs. Our Fatz Built High Flow airbox can be added at check out to complete your intake package and ensure the filtration efficiency matches the performance of your intake package.
Purchase the Fatz Built VDJ High Flow Intake from Fatz Fabrication and experience market leading design and finish standards, with performance to match.
Kit includes: 4” Intake Piece with MAF mounting assembly, 3” alloy Intake Piece, 90 Degree -12 an – push lock fitting, Hose Clamps as required, VDJ Engine Mount, 4” Silicone 90 Bend, 3.25-3” Straight Silicone reducer, 3” silicone hose, joining coupling for silicone bends, Stainless bolts for turbo snout, Turbo snout (advise Turbo fitted), 3/4” Oil Hose Clamp for PCV integration, Piggy Back MAF wiring harness.
(Rendered images are for demonstration purposes only. Airbox is not supplied with intake. Actual surface finish may differ form renders).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication Plumbing Kit from Fatz Airbox to G-Turbo Intake inlet. (Minimal Required for Airbox...
$330.00
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Direction-Plus
DIRECTION-PLUS PRELINE-PLUSPROVENT OIL KIT FORD PXIII BI-TURBO
$692.10
$769.00
The Direction-Plus™ PreLine-Plus / Provent Dual Kit PLPV664DPK is The Ultimate Defence against carbon build-up and water contamination. It fits Ford Everest and Raptor models.
The Dual Kit with our Preline-Plus offering up 100% water separation efficiency* and our ProVent withup to a massive 98% oil separation efficiency, including all parts needed you can‘t go wrong!
Protect your investment 24 hours a day, 365 days a year.
PROTECTION AGAINST WATER CONTAMINATION
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a 100% of water separation and 98% of particle pre-separation. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market.
PROTECTION AGAINST OIL & SOOT CONTAMINATION
Direction-Plus™ ProVent® oil separator kit protects your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system
Direction-Plus
DIRECTION-PLUS TRANSCHILL DUAL TRANSMISSION COOLER KIT MITSUBISHI TRITON MQ & MR (TCD629DPK)
$575.10
$639.00
The TransChill Transmission cooler kit TCD629DPK fits Mitsubishi Triton MQ/MR 4N15 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
By installing a dual cooler kit you will have a higher cooling capacity than the single cooler kit TC629DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT) or 2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL DUAL TRANSMISSION COOLER KIT HOLDEN COLORADO (TCD602DPK)
$719.10
$799.00
The TransChill Transmission cooler kit TCD602DPK (dual cooler) fits Holden Colorado models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
By having two coolers the TCD602DPK kit has a higher cooling capacity than the single cooler kit TC602DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT HOLDEN COLORADO (TC602DPK)
$539.10
$599.00
The TransChill Transmission cooler kit TC602DPK (single cooler) fits Holden Colorado models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
By having two coolers the TCD602DPK kit has a higher cooling capacity than the single cooler kit TC602DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT FORD NEXT GEN RANGER / EVEREST (TCB671DPK)
$674.10
$749.00
The TransChill Arctic Black Transmission cooler kit TCB671DPK fits:
Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On
Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On
This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT FORD RANGER, EVEREST PXIII BI-TURBO (TCB663DPK)
$674.10
$749.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus TransChill Arctic Black Transmission Cooler Kit for D-MAX & BT-50 (TCB645DPK)
$584.10
$649.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB645DPK fits Isuzu D-Max and Mazda BT-50 4JJ3-TCX (3.0L 4cyl) 2020 – On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT TOYOTA LAND CRUISER 300 SERIES (TCB635DPK)
$539.10
$599.00
The Transchill Arctic Black Transmission cooler kit TCB635DPK fits:
Toyota Landcruiser 300 Series F33A-FTV (3.3L 6cyl) 2022 – On
* Vehicles with standard bumper may require minor trimming of some plastic bumper supports.
This transmission cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT NISSAN NAVARA NP300 (TCB630DPK)
$539.10
$599.00
The NEW & IMPROVED 32mm 14 row Arctic Black TransChill Transmission Oil Cooler Kit (TCB630DPK) suits the Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015- On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
Pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
75% more performance than a comparable tube and fin design (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Australian Made vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
Locally designed and packed with all the mounting hardware required for a DIY installation
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT TOYOTA HILUX N80 (TCB628DPK)
$485.10
$539.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT FORD RANGER, EVEREST & BT-50 (TCB621DPK)
$629.10
$699.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB621DPK fits Ford Ranger, Everest and Mazda BT-50 P5AT (3.2L 5cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT TOYOTA PRADO 150 & 155 SERIES (TCB620DPK)
$485.10
$539.00
The TransChill Arctic Black Transmission cooler kit TCB620DPK fits:
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
Toyota Prado 155 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
This product is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus TransChill Arctic Black Transmission Cooler Kit LAND CRUISER 200 (TCB615DPK)
$539.10
$599.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB615DPK fits Toyota Landcruiser 200 Series models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT FOR TOYOTA HILUX N70 (TCB612DPK)
$485.10
$539.00
The TransChill Arctic Black Transmission cooler kit TCB612DPK fits Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2004-2015 & 1GR (4.0L 6cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT ISUZU D-MAX & MU-X (TCB601DPK)
$485.10
$539.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB601DPK fits Isuzu D-Max and MU-X 4JJ1TCX (3.0L 4cyl) 2012 – 2020 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus TransChill Arctic Transmission Cooler Kit -TCBUNIDPK
$521.10
$579.00
The NEW 32mm 14 row Universal TransChill Arctic Black Automatic Transmission cooler kit TCBUNIDPK and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Automatic Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus Transchill Transmission Cooler Kit 200 Land Cruiser
$767.21
$852.45
The TransChill Transmission dual cooler kit TCD615DPK fits Toyota Landcruiser 200 series models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific mounting brackets
Stainless steel fixing hardware
ATF Hose (400psi J1019)
2x 23 row oil cooler
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT TOYOTA HILUX
$468.41
$520.45
The TransChill Transmission cooler kit TC628DPK fits Toyota Hilux models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific mounting brackets
Stainless steel fixing hardware
ATF Hose (400psi J1019)
23 row oil cooler
Direction-Plus
DIRECTION-PLUS TRANSMISSION COOLER KIT ISUZU D-MAX MU-X AND MAZDA BT-50
$883.31
$981.45
Experience optimal performance with the top Directions Plus Transchill Transmission Cooler Kit. Suits Isuzu D-Max, MU-X, and Mazda BT-50. Unmatched quality
Torqit
ULTRA-FAST TORQIT MODULEMAP ECU PROGRAMMING FORD EVEREST 3.2L
$1,791.00
$1,990.00
MODULEMAP FOR FORD EVEREST 3.2L: 08/2015…
Access the full potential of your 3.2L Ford Everest with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your Ford Everest safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your Everest to stock performance
Each tune is completely customised to your vehicle’s modifications, such as tyres, snorkel, weight and more. Feel the instant increase in power and torque, and get rid of sluggish performance with the ultimate ModuleMap solution – powerful, flexible, and safe.
Torqit
TORQIT PTP1005PLUS PEDAL TORQ PLUS TO SUIT VOLKSWAGEN AMAROK 2.0L
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
Torqit PTP1012PLUS Pedal Torq PLUS to suit Toyota Troop Carrier
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1061 PEDAL TORQ PLUS TO SUIT TOYOTA FORTUNER & HILUX
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1022 PEDAL TORQ PLUS TO SUIT TOYOTA FJ CRUISER, HILUX & PRADO
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1010 PEDAL TORQ PLUS TO SUIT NISSAN PATROL
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1062 PEDAL TORQ PLUS TO SUIT MITSUBISHI TRITON
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1036 PEDAL TORQ PLUS TO SUIT MITSUBISHI CHALLENGER, PAJERO & TRITON
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1032 PEDAL TORQ PLUS TO SUIT LDV T60
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
Torqit PTP1012 Pedal Torq PLUS to suit Isuzu & Toyota
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
Torqit PTP1004 Pedal Torq PLUS to suit Holden, Jeep, Mazda & Nissan
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
Torqit PTP1006 Pedal Torq PLUS to suit Great Wall V200
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PTP1005 PEDAL TORQ PLUS TO SUIT FORD TERRITORY & VOLKSWAGEN AMAROK
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
Torqit PTP1016 Pedal Torq PLUS to suit Ford, Jeep & Mazda
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT PT1061 PEDAL TORQ TO SUIT TOYOTA FORTUNER & HILUX
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
TORQIT PT1010 PEDAL TORQ TO SUIT NISSAN PATROL
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
Torqit PT1036 Pedal Torq to suit Mitsubishi
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
Torqit PT1012 Pedal Torq to suit Isuzu & Toyota
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
Torqit PT1006 Pedal Torq to suit Great Wall V200 2L
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
TORQIT PT1005 PEDAL TORQ TO SUIT FORD TERRITORY & VOLKSWAGEN AMAROK
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
Torqit PT1016 Pedal Torq to suit Ford, Jeep & Mazda
$359.10
$399.00
PEDAL TORQ PLUS FOR DS RAM 1500, 5.7L: 2009-2018
A refined version of the Pedal Torq, this completely wireless throttle controller improves throttle response by modifying the signal sent to your Ram’s ECU. Controlled via Bluetooth with our Torqit Connect app, its adjustable settings allow you to fine-tune the DS 1500 Ram’s accelerator to match your driving preferences.
Does your vehicle feel slow and sluggish when towing or carrying heavy roads? The Pedal Torq Plus will give you total control over the accelerator, eliminate throttle lag, and reduce engine strain. Ideal for heavy vehicles with upgrades, towing, and standard vehicles experiencing lag, the Pedal Torq Plus creates a smoother driving experience and helps you optimise your vehicle’s response straight off the mark.
The Pedal Torq Plus is the ultimate set-and-forget unit, providing you with eight different driving profiles to complement any driving style and terrain. It transforms your vehicle’s response when towing and on-road and improves traction in any off-road situation, whether on the sand, soft dirt, rocks, or mud. With adjustable settings in each mode, you have total control over the level of throttle response required for your driving style and terrain.
As the first Bluetooth throttle controller in Australia, the Pedal Torq Plus is wirelessly operated via the Torqit Connect App. Designed in Australia and manufactured in Germany; the Torqit App provides ongoing updates to guarantee your vehicle is always fitted with the most recent technology.
For more details regarding the various driving modes, click the instructions tab.
REMOTE CONTROL KEY FOB
Using Torqit’s key fob remote control, you can switch between modes on your Pedal Torq Plus at the touch of a button. The key fob is a great way to alter your vehicle’s response without needing to use your phone whilst driving. An added bonus of the key fob is that if your vehicle has multiple drivers, the person driving it can easily change the settings to suit their preferences.
PEDAL TORQ PLUS INSTALLATION
Fitting your Pedal Torq Plus is a simple plug-and-play process that takes less than 60 seconds. After downloading the Torqit Connect App, detach your accelerator’s factory plug and install the new harness. Once you have added your device to the Torqit App, you can begin to wirelessly adjust the settings.
PEDAL TORQ PLUS FEATURES
Eliminate throttle lag and sluggish behaviour
Ideal for towing and when under load
Includes eight driving profiles with adjustable settings
Wireless Bluetooth/ key fob control
Keeps your dash clear
Receive ongoing updates with the latest technology via the Torqit Connect App
Fast and simple installation
Five-year product warranty
Torqit
TORQIT POWER MODULE: 4WD PERFORMANCE CHIP FOR D22 2.5L NAVARA (12/2007)
$1,251.00
$1,390.00
TORQIT POWER MODULE PLUS FOR NISSAN NAVARA D22 2.5L: 12/2007
PERFORMANCE GAIN: 23KW / 68NM
The D22 2.5L, Navara Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicles onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. Youll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you're towing, the Torqit Power Module ensures you get the most life possible out of your vehicle's engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia's first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you're always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit's unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle's response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
INSTALLATION
The Torqit Power Module can be installed in most petrol and diesel vehicles. The unit is fitted between two plugs in your vehicle's fuel operating system, with the simple set up process taking just 15 minutes.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle's engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
Torqit
TORQIT POWER MODULE: 4WD PERFORMANCE CHIP FOR SPORT 2.4L PAJERO (01/2015)
$1,251.00
$1,390.00
TORQIT POWER MODULE PLUS FOR MITSUBISHI PAJERO SPORT 2.4L: 01/2015…
PERFORMANCE GAIN: 18KW / 65NM
The Sport 2.4L, Pajero Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicle’s onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. You’ll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you’re towing, the Torqit Power Module ensures you get the most life possible out of your vehicle’s engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia’s first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you’re always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit’s unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle’s response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
INSTALLATION
The Torqit Power Module can be installed in most petrol and diesel vehicles. The unit is fitted between two plugs in your vehicle’s fuel operating system, with the simple set up process taking just 15 minutes.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle’s engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
