Direction-Plus
DIRECTION-PLUS FM601DPK 130KW DP 30 KIT TO SUIT ISUZU D-MAX
$411.30
$457.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
Direction-Plus
DIRECTION-PLUS RP1004DP RP THROTTLE CONTROLLER FOR HOLDEN & NISSAN
$269.10
$299.00
The ResponsePlus throttle Controller RP1004DP fits in Holden and Nissan vehicles. It is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. ResponsePlus Throttle Controller will eliminate throttle lag and increase throttle response by adjusting the signal sent to the vehicle’s ECU from the fly-by-wire pedalbox.
In simple terms, ResponsePlus will eliminate throttle lag on a vehicle’s accelerator, providing a more responsive vehicle and a more refined driving experience.
Direction-Plus
DIRECTION-PLUS FM611DPK DP 30 KIT FOR HOLDEN COLORADO & ISUZU D-MAX
$546.30
$607.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
Direction-Plus
DIRECTION-PLUS FM602DPK 2.8 DP 30 KIT FOR HOLDEN COLORADO
$512.10
$569.00
Direction Plus™ Fuel Manager Pre-Filter Kit FM602DPK suits Holden Colorado / Colorado 7 (LWH) models, protecting its engine against costly injector failure.
FUEL MANAGER: HOW IT WORKS
When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel.
HIGH LEVEL PROTECTION
As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system
Direction-Plus
Direction-Plus Fm627Dpk To Suit Great Wall V200
$369.00
$410.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
Direction-Plus
DIRECTION-PLUS RP1016DP RP THROTTLE CONTROLLER FOR MAZDA, FORD & JEEP
$269.10
$299.00
The ResponsePlus throttle Controller RP1016DP fits in Ford Ranger, Everest, Mazda BT-50 and Jeep Wrangler vehicles. It is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings.
ResponsePlus Throttle Controller will eliminate throttle lag and increase throttle response by adjusting the signal sent to the vehicle’s ECU from the fly-by-wire pedalbox.
In simple terms, ResponsePlus will eliminate throttle lag on a vehicle’s accelerator, providing a more responsive vehicle and a more refined driving experience.
Direction-Plus
DIRECTION-PLUS PL661DPK PX PL KIT FOR FORD RANGER
$476.10
$529.00
Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
Direction-Plus
Direction-Plus Pv641Dpk
$380.66
$422.95
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
Direction-Plus
Direction-Plus Plpv661Dpk Preline-Plus/Provent Dual Kit
$719.10
$799.00
The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems.
PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced.
Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.
Direction-Plus
Direction-Plus Pv661Dpk Provent Oil Separator Kit
$404.10
$449.00
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
Direction-Plus
DIRECTION-PLUS FM609DPK 3.0L FORD RANGER & MAZDA BT50
$449.10
$499.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.
This leaves the O.E.M fuel filter to do the final and finer filtration, protectiing your diesel fuel system to the fullest.
Direction-Plus
DIRECTION-PLUS PL621DPK PX PL KIT FOR FORD RANGER
$404.96
$449.96
Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
Direction-Plus
DIRECTION-PLUS FM621DPK DP 30 KIT FOR MAZDA BT50 & FORD RANGER
$382.50
$425.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.
This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
Direction-Plus
Direction-Plus Fm608Dpk Mb Sprinter 416 Dp 30 Kit
$365.36
$405.96
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.
This leaves the O.E.M fuel filter to do the final and finer filtration, ensuring you are maximising the protection of your diesel fuel system.
Direction-Plus
DIRECTION-PLUS PV638DPK DEFENDER 110 PROVENT KIT
$385.20
$428.00
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
Direction-Plus
Direction-Plus Pl801Dpk Uni Pl150 10Mm Kit + Bkt
$440.10
$489.00
Direction-Plus™ Universal PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
MULTI-STAGE WATER ALERT
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
Direction-Plus
Direction-Plus Pl802Dpk Kit
$449.10
$499.00
Direction-Plus™ Universal PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
MULTI-STAGE WATER ALERT
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
Direction-Plus
Direction-Plus Universal Provent Ultimate Catch Can
$188.96
$209.95
Direction-Plus™ Universal ProVent® Ultimate Catch Can PV150DPK kit comes with Provent Element 150 + fittings. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
NOTE: This kit does not include brackets. If you need the same kit with brackets go to PV151DPK
Advantages of The Direction-Plus™ ProVent® Oil Separator PV150DPK Kit:
• Ultra-compact design• Up to 150 l/min blow-by gas• Equipped as standard with high-efficiency medium• Pressure regulation• Available with by-pass or pressure-relief valve• Suitable for use as an open or closed CCV• Use of two ProVent 150 in parallel possible• Protection against incorrect insertion of replacement element through symmetrical design• Check valve for oil return available as option (recommended)• Cover position adjustable in steps of 3 degrees
Direction-Plus
Direction-Plus Universal Provent Oil Separator Kit
$278.06
$308.95
Direction-Plus™ Universal ProVent® oil separator PV200DPK kit comes with drain and adapters. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. . It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DPK Kit:
• Up to 200 l/min blow-by gas
• Very compact design
• Available with high-efficiency or ultra-efficiency medium \n• Integrated pressure regulation for crankcase
• Also available with bypass valve (integrated in separation element)
• Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle
• Suitable for use with open or closed CCV system
• Use of two ProVent 200 in parallel possible
• Check valve for oil return available (recommended)
Direction-Plus
DIRECTION-PLUS PL KIT FOR TOYOTA LANDCRUISER WAGON
$449.10
$499.00
Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
Direction-Plus
Direction-Plus Pv201Dpk Uni Pv200 Kit + Bkt
$383.40
$426.00
Direction-Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
Rhino-Rack
RHINO-RACK VORTEX COMPLETE ROOF RACK BUNDLE FOR BYD SHARK 6
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
TJM
TJM PRO SERIES AIR TANK 2.5L
$229.00
Compliant with the Australia Standard - AS2971-2007. The TJM Pro Series 5L Air Tank delivers consistent high volume air output when partnered with a TJM Pro Series Twin Air Compressor or TJM Pro Series Single Air Compressor. Rated to a maximum working pressure of 150psi (1030kPa), the TJM Pro Series 5L Air Tank is perfect for rapid tyre inflation, operating air powered tools, activating air actuated differential lockers and much more.
Specifications
Material:
Aluminium
Size:
437mm x 148mm x 159mm
Suits:
013COMPVPROT 013COMPVPROS
Colour:
Gold
Package Weight:
5.20 kg
TJM
TJM PRO SERIES AIR TANK 5L
$269.01
Compliant with the Australia Standard - AS2971-2007. The TJM Pro Series 5L Air Tank delivers consistent high volume air output when partnered with a TJM Pro Series Twin Air Compressor or TJM Pro Series Single Air Compressor. Rated to a maximum working pressure of 150psi (1030kPa), the TJM Pro Series 5L Air Tank is perfect for rapid tyre inflation, operating air powered tools, activating air actuated differential lockers and much more.
Specifications
Material:
Aluminium
Size:
437mm x 148mm x 159mm
Suits:
013COMPVPROT 013COMPVPROS
Colour:
Gold
Package Weight:
5.20 kg
Fatz Fabrication
FATZ FABRICATION PX RH RAPTOR SNORKEL. POLISHED. SUIT BI TURBO 2.0L, COUPLING TO FATZ AIRBOX...
$1,330.00
Fatz Fabrication PX RH Raptor Snorkel. Polished. Suit Bi Turbo 2.0L, coupling to Fatz Airbox -FFPX-SNRH-POL-RPT3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION PX RH RAPTOR SNORKEL. POWDER COATED SATIN BLACK. SUIT BI TURBO 2.0L, COUPLING...
$1,390.00
Fatz Fabrication PX RH Raptor Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L, coupling to Fatz Airbox -FFPX-SNRH-SPC-RPT3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION PX RH RAPTOR SNORKEL. POLISHED. SUIT BI TURBO 2.0L FACTORY ADAPTION INCLUDED-FFPX-SNRH-POL-RPT2
$3,240.00
Fatz Fabrication PX RH Raptor Snorkel. Polished. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-POL-RPT2
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION PX RH RAPTOR SNORKEL. POWDER COATED SATIN BLACK. SUIT BI TURBO 2.0L FACTORY...
$3,300.00
Fatz Fabrication PX RH Raptor Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-SPC-RPT2
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication PX RH Snorkel. Polished. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-POL-FAB2
$1,420.00
Fatz Fabrication PX RH Snorkel. Polished. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-POL-FAB2
. Series 1-3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication PX RH Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L Factory Adaption...
$1,480.00
Fatz Fabrication PX RH Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-SPC-FAB2
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO 3" INLET HIGH MOUNT...
$290.00
Fatz Fabrication GU Patrol Plumbing kit. Suit Fatz 4" Airbox to 3" Inlet HIGH MOUNT Turbo, TD42 Engine-FFGU-PL-TDHM-3-KT
With the Upgrade to a turbo with GU TD42 4” inlet housing, we upgrade to 3” plumbing from the box to the turbo, utilising a long radius alloy bend for free-flowing intake air. The pipe has a kick welded into the turbo end to offset the pipe away from the exhaust manifold. The kit includes all items needed to plumb from our Fatz built Airbox to a 3″ inlet housing on a low mount manifold. The pipe includes a fitting welded in for plumbing in of the PCV hose, as well as a cap, should you prefer not to. All hose, fittings and clamps required to fit out. Some trimming of silicone bends is required. purchase our GU TD42 4″ Turbo Inlet Plumbing kit and experience the difference.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO 4" INLET HIGH MOUNT...
$290.00
Fatz Fabrication GU Patrol Plumbing kit. Suit Fatz 4" Airbox to 4" Inlet HIGH MOUNT Turbo, TD42 Engine-FFGU-PL-TDHM-4-KT
With the Upgrade to a turbo with GU TD42 4” inlet housing, we upgrade to 4” plumbing from the box to the turbo, utilising a long radius alloy bend for free-flowing intake air. The pipe has a kick welded into the turbo end to offset the pipe away from the exhaust manifold. The kit includes all items needed to plumb from our Fatz built Airbox to a 4″ inlet housing on a low mount manifold. The pipe includes a fitting welded in for plumbing in of the PCV hose, as well as a cap, should you prefer not to. All hose, fittings and clamps required to fit out. Some trimming of silicone bends is required. purchase our GU TD42 4″ Turbo Inlet Plumbing kit and experience the difference.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO TURBO INLET ZD30 DI....
$490.00
ZD30 CRD/Di Plumbing Kit. Fatz Box to Turbo inlet.
Our Plumbing kit for the ZD30 utilizes a CNC bent calibrated sized tube allowing for direct installation of the MAF sensor and PCV hose as required. This allows for free-flowing intake air from our Fatz built Airbox to the turbo inlet while ensuring Air flow data is accurate. The PCV hose is plumbed back into the intake with high quality Aeroflow fittings and hose required. Also included in the kit is a Laser cut, folded bracket for re-location of the boost control solenoid as required.
NOTE: Series 4 ZD30 Di has the CRD MAF Sensor and needs a CRD Kit. If the sensor in your vehicle has a rectangle slot, you NEED a CRD plumbing kit.
Kit includes: 1 x 4”-3” reducing silicone 90 degree bend, 3” alloy pipe with -10 fitting welded in (Specific to CRD or Di engine configurations) 3-2” reducing 90 degree silicone (Dependent on turbo inlet, please specify) 90 degree -10 push lock fitting, 5/8 hose, clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO TURBO INLET ZD30 CRD....
$490.00
ZD30 CRD/Di Plumbing Kit. Fatz Box to Turbo inlet.
Our Plumbing kit for the ZD30 utilizes a CNC bent calibrated sized tube allowing for direct installation of the MAF sensor and PCV hose as required. This allows for free-flowing intake air from our Fatz built Airbox to the turbo inlet while ensuring Air flow data is accurate. The PCV hose is plumbed back into the intake with high quality Aeroflow fittings and hose required. Also included in the kit is a Laser cut, folded bracket for re-location of the boost control solenoid as required.
NOTE: Series 4 ZD30 Di has the CRD MAF Sensor and needs a CRD Kit. If the sensor in your vehicle has a rectangle slot, you NEED a CRD plumbing kit.
Kit includes: 1 x 4”-3” reducing silicone 90 degree bend, 3” alloy pipe with -10 fitting welded in (Specific to CRD or Di engine configurations) 3-2” reducing 90 degree silicone (Dependent on turbo inlet, please specify) 90 degree -10 push lock fitting, 5/8 hose, clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO TURBO INLET ZD30 CRD....
$490.00
ZD30 CRD/Di Plumbing Kit. Fatz Box to Turbo inlet.
Our Plumbing kit for the ZD30 utilizes a CNC bent calibrated sized tube allowing for direct installation of the MAF sensor and PCV hose as required. This allows for free-flowing intake air from our Fatz built Airbox to the turbo inlet while ensuring Air flow data is accurate. The PCV hose is plumbed back into the intake with high quality Aeroflow fittings and hose required. Also included in the kit is a Laser cut, folded bracket for re-location of the boost control solenoid as required.
NOTE: Series 4 ZD30 Di has the CRD MAF Sensor and needs a CRD Kit. If the sensor in your vehicle has a rectangle slot, you NEED a CRD plumbing kit.
Kit includes: 1 x 4”-3” reducing silicone 90 degree bend, 3” alloy pipe with -10 fitting welded in (Specific to CRD or Di engine configurations) 3-2” reducing 90 degree silicone (Dependent on turbo inlet, please specify) 90 degree -10 push lock fitting, 5/8 hose, clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO TURBO INLET ZD30 CRD....
$490.00
ZD30 CRD/Di Plumbing Kit. Fatz Box to Turbo inlet.
Our Plumbing kit for the ZD30 utilizes a CNC bent calibrated sized tube allowing for direct installation of the MAF sensor and PCV hose as required. This allows for free-flowing intake air from our Fatz built Airbox to the turbo inlet while ensuring Air flow data is accurate. The PCV hose is plumbed back into the intake with high quality Aeroflow fittings and hose required. Also included in the kit is a Laser cut, folded bracket for re-location of the boost control solenoid as required.
NOTE: Series 4 ZD30 Di has the CRD MAF Sensor and needs a CRD Kit. If the sensor in your vehicle has a rectangle slot, you NEED a CRD plumbing kit.
Kit includes: 1 x 4”-3” reducing silicone 90 degree bend, 3” alloy pipe with -10 fitting welded in (Specific to CRD or Di engine configurations) 3-2” reducing 90 degree silicone (Dependent on turbo inlet, please specify) 90 degree -10 push lock fitting, 5/8 hose, clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO 4" INLET TURBO, TD42...
$360.00
4″ Plumbing kit From Fatz Built Airbox to 4″ turbo inlet. (Low mount)
With the Upgrade to a turbo with GU TD42 4” inlet housing, we upgrade to 4” plumbing from the box to the turbo, utilising a long radius alloy bend for free-flowing intake air. The pipe has a kick welded into the turbo end to offset the pipe away from the exhaust manifold. The kit includes all items needed to plumb from our Fatz built Airbox to a 4″ inlet housing on a low mount manifold. The pipe includes a fitting welded in for plumbing in of the PCV hose, as well as a cap, should you prefer not to. All hose, fittings and clamps required to fit out. Some trimming of silicone bends is required. purchase our GU TD42 4″ Turbo Inlet Plumbing kit and experience the difference.
Kit includes: 2 x 4” Silicone 90 degree bend, alloy long radius 90 degree bend with fitting and kick welded in, 90 degree-8 push lock fitting, 1/2” hose for tappet cover vent,-8 cap for PCV fitting, all hose clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO 3.5" INLET TURBO, TD42...
$360.00
4″ Plumbing kit From Fatz Built Airbox to 3.5″ turbo inlet. (Low mount)
With the Upgrade to a turbo with GU TD42 4” inlet housing, we upgrade to 4” plumbing from the box to the turbo, utilising a long radius alloy bend for free-flowing intake air. The pipe has a kick welded into the turbo end to offset the pipe away from the exhaust manifold. The kit includes all items needed to plumb from our Fatz built Airbox to a 4″ inlet housing on a low mount manifold. The pipe includes a fitting welded in for plumbing in of the PCV hose, as well as a cap, should you prefer not to. All hose, fittings and clamps required to fit out. Some trimming of silicone bends is required. purchase our GU TD42 4″ Turbo Inlet Plumbing kit and experience the difference.
Kit includes: 2 x 4” Silicone 90 degree bend, alloy long radius 90 degree bend with fitting and kick welded in, 90 degree-8 push lock fitting, 1/2” hose for tappet cover vent,-8 cap for PCV fitting, all hose clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO 3" INLET TURBO, TD42...
$360.00
Plumbing Kit: GU TD42 3″ Turbo inlet.
With the Upgrade to a turbo with GU TD42 3” inlet housing, we upgrade to 4” plumbing from the box to the turbo, reducing to 3″ at the turbo inlet. Utilising a long radius alloy bend for free-flowing intake air. The pipe has a kick welded into the turbo end to offset the pipe away from the exhaust manifold. The kit includes all needed to plumb from our Fatz built Airbox to the inlet. Compatible with low mount manifolds inc factory or like location. Including a fitting welded in for plumbing in of the PCV hose, or a cap should you prefer not to. All hose, fittings and clamps required to fit out. Some trimming of silicone bends is required. Purchase Fatz Fabrication’s GU TD42 3″ plumbing kit and experience the difference.
Kit includes: 1 x 4” Silicone 90 degree bend, alloy long radius 90 degree bend with fitting and kick welded in, 4”-3” deducing 90 degree silicone bend, 90 degree-8 push lock fitting, 1/2” hose for tappet cover vent,-8 cap for PCV fitting, all hose clamps required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION GU PATROL PLUMBING KIT. SUIT FATZ 4" AIRBOX TO FACTORY TURBO TD42 ENGINE....
$290.00
Plumbing Kit: GU TD42, Factory Turbo.
Plumbing kit for GU TD42 Factory HT18 Turbos with vertical inlet. Plumbing includes all needed to plumb from our Fatz Built Airbox to the standard GU TD42 turbo inlet. Including the option of plumbing in the PCV hose from your valve cover. We also include a cap, should you prefer not to plumb in the PCV system.
Kit includes: 1 x 4”-3” reducing 90 degree silicone bend. 1 x Alloy tube in 3” with-8 fitting welded on. 1 x-8 cap, 1 x-8 90 degree push lock fitting for PCV hose, 1 Length of ½ hose for PCV connection, 1 x 3-2.5” 90 degree reducing silicone bend, all hose clamps required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication HDJ70 Series Plumbing Kit to 4" Forward facing turbos. -FFHDJ-PL4-KT
$380.00
Fatz Fabrication HDJ70 Series Plumbing Kit to 4" Forward facing turbos. -FFHDJ-PL4-KT
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication HDJ70 Series Plumbing Kit to 3.5" Forward facing turbos. -FFHDJ-PL350-KT
$380.00
Fatz Fabrication HDJ70 Series Plumbing Kit to 3.5" Forward facing turbos. -FFHDJ-PL350-KT
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication HDJ70 Series Plumbing Kit to 3" Forward Facing Turbo. -FFHDJ-PL3-KT
$380.00
Fatz Fabrication HDJ70 Series Plumbing Kit to 3" Forward Facing Turbo. -FFHDJ-PL3-KT
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication HDJ70 Series Plumbing Kit kit to Factory 2.75" Turbo (1HD-Fte)-FFHDJ-PLSTD-KT
$320.00
Fatz Fabrication HDJ70 Series Plumbing Kit kit to Factory 2.75" Turbo (1HD-Fte)-FFHDJ-PLSTD-KT
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Polished...
$7,440.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Powder...
$7,560.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Polished...
$7,440.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Powder...
$7,560.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication Dobinson 3.5"I.D Ram head (Secures to tube with s/s screws. Slides into snorkel...
$155.00
Safari 3.5″ Ram head.
3.5″″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
