Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit.  Includes all hardware and components needed to fit side rails to any 9 slat-long Front Runner Slimline II Roof Rack. Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 9 Slat-long Front Runner Slimline II Roof Racks. Install in minutes. No drilling required. Adds extra cargo support. Attractive, low profile design. Mounting hardware included. Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. Manufactured with corrosion resistant, high-density aluminum components. The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1642mm (64.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.9kg (6.4lbs)

Securely mount your 40" LED Light Bar (VX1000-CB) to the front or underneath your Front Runner Roof Rack with this Single Mount bracket. These brackets feature a protective cover to shield the light bar against small rocks.   Two sets of brackets that secure the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount to the Front Runner Roof Rack. Front Rack mounting brackets secure this light bar using the top T-slots of the front combined slat side profile, while the Under Rack mounting brackets secure it using the bottom T-slot of the front combined slat profile. It comes with a robust front cover to protect the LED light bar from small rocks. All components are made of steel and aluminum and sealed with the same durable, weather-resistant black powder coating as the Front Runner Roof Racks. Includes all installation hardware and fitting instructions. Consists of:1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 Front CoverInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:1070mm (42.1")L x 102mm (4")W x 58mm (2.3")HWeight:2.8kg (6.2lbs)

Install this mount onto a flat surface to allow quick and easy access to your 20L Pro Water Tank (WTAN060). Easily removable by loosening the stainless-steel eye nuts. The water tank can be locked for added peace of mind using the Front Runner Accessory Lock (RRAC134) (sold separately). Plastic alignment spacers protect, align and secure your water tank. The bracket is made from steel and sealed with the same weather-resistant black powder coating as Front Runner racks. All installation hardware included. Features Consists of: 1 x Universal Side Mount for Pro Water Tank / 20L Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 211mm (8.3") L x 341mm (13.4") W x 237mm (9.3") H Weight: 2.06kg (4.5lbs)

Upgrade your cargo slide with this strong, steel bracket which is used to secure a Drop Down Table to either side of the slide. The bracket will transform your slide as the table is a super-useful surface on which to place drinks or prepare food.   A bracket to secure the *Drop Down Tailgate Table to the *Load Bed Cargo Slide / Medium or the *Load Bed Cargo Slide / Large. This bracket bolts onto either the Left or Right side of your Load Bed Cargo Slide, to securely hold the *Drop Down Tailgate Table. Made of high strength steel and sealed in the same weather resistant black powder-coating as Front Runner racks. Note: This bracket is not suitable for front fitment or for fitment on the Load Bed Cargo Slide / Small. *Sold separately. Consists of:3 x Mounting BracketsInstallation hardwareFitting instructions Materials used:Black powder-coating high strength steel Product Dimensions:690mm (27.2") L x 237mm (9.3") W x 47mm (1.9") H Weight:1.89Kg (4.2lbs)

These brackets have been designed to work in conjunction with the Pro Stainless Steel Camp Table, the Pro Stainless Steel Prep Table and Under-Rack Table Latch - by Front Runner to make taking a sturdy table along with you on your travels as simple and effortless as possible. Pro Stainless Steel Table Under Rack Bracket - by Front Runner: A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Camp/Prep Table or Pro Stainless Steel Prep Table with Basin - by Front Runner. The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the option to access to the table from either the side or rear of the vehicle. Easy installation. Made of steel that is black powder coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. Under-Rack Table Slides Latch - by Front Runner: Keeps the Pro Stainless Steel Camp/Prep Table or Pro Stainless Steel Prep Table with Basin - by Front Runner securely stored in the Under-Rack Table Brackets - by Front Runner. Secured to the top of the Slimline II rack using the T-slot and clamps over the lip of the table to keep it in place. A rubber insert prevents rattling and damage to the table. Spring loaded for ease of use. Lockable for added security. Made of steel that is black powder coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit. Features Consists of: 1 x Pair of Storage Slides 1 x Table Latch Installation Hardware Materials used: Black powder-coated Steel PVC Grommet Product Dimensions: 881mm (34.7")L x 187mm (7.4")W x 46mm (1.8")H Weight: 2.4kg (5.3lbs) TABLE CARE: Keep your table clean and sparkling with these easy care instructions. Add a small amount of dish soap to a damp soft cloth. Wipe the table along the grain of your tabletop. Dry excess moisture with a dry towel. Quickly add polish by dabbing on a small amount of mineral or baby oil, wiping with the grain of the stainless steel. Done!

Once these brackets are installed on a Front Runner Rack, no additional tools are needed to remove or refit the awning. Simply release the 2 latches and lift the awning away in seconds. No more wrenching in tight spaces during the off-season or time-consuming weekday removal of the awning. This strong and "rattle-free" mounting system is built off-road tough for use with Front Runner Racks. Works with all Front Runner Awnings and other popular awning brands like Eezi-Awn, Oz Tent, etc. 2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the awnings mounting channel using the supplied fasteners. Safely secured in place using 2 latches with built-in safety catch. For added peace of mind, lock your latches in place using Rack Accessory Lock / Small. The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted. No awning modification required. Removed awnings can be stored using the wall mount brackets supplied. Supplied with all required mounting hardware. Fitting instructions are included. Weight limit: 20kg (44.1lbs). Note: Not suitable for 270 degree awnings. Features Consists of: 1 x Pair of Quick Release Awning Brackets Installation Hardware Fitting instructions Materials used: Black powder coated Steel Product Dimensions: (Per Single Bracket) 161.5mm(6.4") L x 103mm (4.1") W x 100mm (3.9") H Weight: 2kg (4.4lbs)

Get your Toyota Tacoma Double Cab ready for camping and overland adventures with the dynamic and functional Slimsport Roof Rack Kit; its clever design allows for the fitment of a 40” lightbar for after-dark adventures, while the included wind fairing will keep the noise levels (and fuel consumption) right down.   Lightbar wind fairing for Toyota Tacoma 4th Gen Double Cab (2024-Current) Slimsport Roof Rack Kit / Lightbar ready. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Wind FairingHardware KitFitment Guide Materials used:Black powder-coated mild steel Product Dimensions:75mm (3") L x 1195mm (47.1") W x 200mm (7.9") H Weight:3.05Kg (6.7lbs)

Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 4-7 slat-long Front Runner Slimline II Roof Rack. Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit works with 7 Slat-long Front Runner Slimline II Roof Racks. If you would like to fit this kit to a rack with slats ranging from 4-6 slats, some cutting of the side rail tubing may be necessary, see the fitting instructions for further details. Install in minutes. No drilling required. Adds extra cargo support. Attractive, low profile design. Mounting hardware included. Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. Manufactured with corrosion resistant, high-density aluminum components. The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consists of:4x Tubular rails2x Cast LH drop downs2x Cast RH drop downs2x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1236mm (48.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.14kg (4.7lbs)

Be more economical when hauling gear and add light to your Chevrolet Colorado or GMC Canyon (2015-2022) with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.   Lightbar wind fairing for Chevrolet Colorado/GMC Canyon (2015-2022) Slimsport Roof Rack Kit / Lightbar Ready. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Chevrolet Colorado/GMC Canyon Slimsport Rack 40" Light Bar Wind FairingFitting InstructionsInstallation HardwareMaterials used:Black powder coated steelProduct Dimensions:1450mm (57.1") L x 255mm (10") W x 55mm (2.2") HWeight:2.7kg (5.9lbs)

Don’t let darkness throw shade on your adventures. Keep exploring after nightfall with the 10" LED Light Bar. The high-performance LEDs with OSRAM technology, throw 1500 lumens over 37m. It features an intelligent reflector design that diverts the light from the LEDs so that oncoming traffic is not directly exposed to the light; as well as an additional yellow cover, that won’t attract insects to your campsite.   The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens. The 3000 Kelvin intensity is distributed as a flood beam pattern. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light. Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site. The integrated driver and thermal management system measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan. The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only. Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112). The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislation of the countries must be observed. Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack with 10" LED Light Bar VX250-FL Mounting Bracket. The mounting bracket includes side guards to protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris. Fitment guide and installation hardware included. Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.

LED flood light for illumination around vehicle and campsite. Comes standard with Front Runner custom tiltable bracket for fitting to the front, side or rear of the Roof Rack.   LED flood light for illumination around vehicle and campsite. Comes standard with Front Runner tiltable mounting bracket for fitting to the front, side or rear of the Roof Rack. Powered by power cord from vehicle 12v accessory outlet (Hella Extension Cord - 3m/10'). Bracket has power inlet and outlet to power light and additional 12v accessories simultaneously. Special regulations and legislation within each country should be taken into consideration before use. Note: For compatibility with the Slimsport or Slimpro Van Rack the Slimsport Side Mount Accessory Bracket / Small, is required. *sold separatelyNote: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.   7 Watt Square LED Light Specifications:Input Voltage: 9-32 Volts DCPower Consumption: 27 WattsAmperage Draw: 2.1 Amps @ 12 VLumen Output: Approx. 1700Beam Pattern: Flood PatternBeam Angle: 60 Degree FloodHousing Material: AluminumMounting Bracket: Steel powder coatedLens Material: Polycarbonate Dust Proof, Water Proof!

When stuck, you want quick access to your recovery boards. This is exactly what the Pro Bed Recovery Bracket offers, allowing you to conveniently attach your MAXTRAX, Tred Pro or Tred GT to the Pro Bed System. This Pro Bed Recovery Bracket bolts on the top and bottom side of the Pro Bed System. To attach your MAXTRAX, use the included Pro Bed Recovery Device Mounting Hardware or MAXTRAX Mounting Pin Set * Sold Separately. The included Pro Bed Recovery Device Mounting Hardware can be used to mount your Tred Pro and Tred GT Recovery Boards. Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit. As a universal solution, the Pro Bed Universal Accessory Mount is available. For a complete water solution, Front Runner offers the Pro Bed Water Kit / 20L. Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack. Features Consists of: 1 x Pro Bed Universal Accessory Mount 1 x Pro Bed Recovery Device Mounting Hardware Installation Hardware Fitment Guide Materials used: Black powder coated steel Product Dimensions: 490mm (19.3") L x 200mm (7.9") W x 30mm (1.9") H (Per Single Bracket) Weight: 3.28kg (7.2lbs)

​A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle. ​A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.This allows a winch to sit securely on the chosen vehicle. Consists of:1 x Winch Plate Product Dimensions:600mm (23.6") L x 190mm (7.5") W x 87mm (3.4") H Weight:5.5kg (12.1lbs)

Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down. Lightbar wind fairing for . Allows fitment of 40" Front Runner light bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black Powder Coated Steel Product Dimensions:1150mm (45.3") L x 160mm (6.3") W x 121mm (4.8") H Weight:2.36kg (5.2lbs)

Smooth out your ride in Ford Ranger in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look. A wind fairing for the Ford Ranger . Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Ford Ranger Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1150mm (45.3") L x 161mm (6.3") W x 131mm (5.2") H Weight:2.92kg (6.4lbs)

Improve the airflow and fuel consumption of your Ford Ranger T6.2 or Volkswagen Amarok when you fit this Slimsport Rack 40" Light Bar Wind Fairing. It will push the air up and over your rack and roof cargo, thereby also reducing wind noise. Designed to pair with the 40" Front Runner Light Bar for a sleek look and even more functionality. Lightbar wind fairing for Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready and Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit/Lightbar Ready. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Features Consists of: 1 x Slimsport Rack 40" Light Bar Wind Fairing 1 x Protection Strip Installation Hardware Fitting instructions Materials used: Black powder coated steel Product Dimensions: 1160mm (45.7") L x 156mm (6.1") W x 156mm (6.1") H Weight: 3.19kg (7lbs)

Improve airflow and fuel consumption of your Ford Ranger T6.2 or Volkswagen Amarok when you fit this Slimsport Rack Wind Fairing. It will push the air up and over your rack and roof cargo, reducing wind noise. There is a durable rubber blade on the bottom edge of the fairing, which seals and protects the roof when going over rough terrain. A wind fairing for the Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit and Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting instructions Materials used:Black powder coated steel Product Dimensions:1160mm (45.7") L x 182mm (7.2") W x 182mm (7.2") H Weight:3.88kg (8.6lbs)

Lightbar wind fairing for Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit / Lightbar ready. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Features Consists of: 1 x Slimsport Rack 40" Light Bar Wind Fairing 1 x Protection Strip Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 1175mm (46.3") L x 171mm (2.8") W x 170mm (6.7") H Weight: 2.37kg (5.2lbs)

A wind fairing for the Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Features Consists of: 1 x Toyota 4Runner Slimsport Rack Wind Fairing 1 x Protection Strip Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 1175mm (46.3") L x 182mm (7.2") W x 114mm (4.5") H Weight: 2.93kg (6.6lbs)