Keep your adventure going after the sun sets with this 10” LED Light Bar. The ECE compliant high performing LED creates a strong 3000 Kelvin flood beam pattern so your trail will always be well-lit.   The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens. The 3000 Kelvin intensity is distributed as a flood beam pattern. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light. Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site. The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aids in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only. Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112). The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislations of the countries must be observed. Secures to your Front Runner Roof Rack with 10" LED Light Bar VX250-FL Mounting Bracket. Connect you 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to a Roof Rack Power Point*, powered by Hella Extension Cord - 3m/10'* power cord from your vehicles 12V accessory outlet. *Note: The Roof Rack Power Point and Hella Extension Cord - 3m/10' are sold separately.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.   Consists of:1 x Lightbar1 x Yellow cover1 x Bracket set1 x Bolt Kit Product Dimensions:Light Bar:275mm (10.8") L x 67mm (2.6") D x 35mm (1.4") H Light Bar with supplied bracket:328mm (12.9") L x 67mm (2.6") D x 55mm (2.2") H Weight:875g (27.3oz) Special Notes:Product type: On-road and off-roadSKU: LEDWL 115-FLFRLED supplier: OSRAMLumens: 150012/24V30W2.5 AmpsColor temperature: 3000 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: R112

Quickly get your tyres up to their optimum pressures with the OSRAM TYREinflate 830. Thanks to the 4-metre power cable, it can easily access all four tyres and just plugs into your vehicle's 12V socket. This is great for driving on soft sand, gravel, or rocks, where you must deflate and inflate tyres.   The OSRAM TYREinflate 830 has been specially developed for use with larger vehicles and their tyres, making it ideal for cars, caravans, motorhomes, off-road vehicles, minibuses and vans.  This tyre inflator can inflate a 13" tyre in approx. 2 minutes and a 22" tyre in approx. 5 minutes.  The auto stop function and the deflator valve help to keep the tyres optimally inflated.  This can also reduce the risk of over- or under-inflation and the resulting possible damage to the tyres.  The TYREinflate 830 has a 4-metre power cable for the accessibility to all four tyres and plugs directly into your vehicle's 12-volt socket.  The backlit LED display and integrated LED light provide improved readability of the pressure settings and improved illumination of the working area even in reduced visibility conditions or at night.  Also included are three adapters for inflating sports balls and other small inflatables and a storage bag to protect the unit and store it neatly. OSRAM offers a 2-year guarantee on this product. Based on inflating a 13” tyre from flat to 2.4 BAR /22” tyre from flat to 2.6 bar. Measurements of the tyre pressure and inflation of the tyres to the optimum tyre pressure must always be conducted on cold tyres. Consists of:1 x Large Vehicle Digital Tyre InflatorInstallation HardwareFitting Instructions Product Dimensions:250mm (9.84") L x 150mm (5.9") W x 100mm (3.93") HWeight:2.6kg (5.7lbs) Special Notes:180W12VGuarantee: 2 yearsSupplier SKU: OTI830

These 57mm (2.24") roof top tent mounting brackets allow extra clearance along your Front Runner Roof Racks side rails to allow room for certain rack accessories (eg. Awnings). Made from black powder-coated steel. All necessary hardware to mount the brackets to the Front Runner Roof Rack is included. Features Consists of: 6 x Tent Mount Kit / Tall Brackets Materials used: 2mm (0.078) Black powder coated steel Product Dimensions: 245mm (9.6") L x 70mm (2.4") D x 57mm (2.2") H Weight: 2.25kg (5lbs)

Easily transfer large, heavy and/or long supplies and gear onto your Front Runner rack. The Front Runner Cargo Roller can be quickly mounted to the side, or the rear, of your Front Runner rack. The Front Runner Cargo Roller fits a Front Runner rack for easy loading and unloading of long or heavy items. Helpful for loading and unloading kayaks and canoes as well as tradesman items like lumber and building supplies. Can be fitted onto one slat at the rear of rack or across slats on the side of the rack. At 496mm (19.5") long, the roller accommodates most load sizes. To create an even wider rolling surface (i.e. for plywood or sheetrock) two rollers can be installed directly next to each other. Each roller bracket set features 4 tie-down points for Front Runner Stratchits or other straps. The roller has a nylon bearing housing. These weather resistant, non-corrosive, maintenance-free inserts will offer trouble-free spinning for years to come. Each roller has a soft rubber surface to prevent damage to high-value items. Comes complete with mounting hardware and fitting instructions. Made in South Africa. *Not sold in pairs.   Consists of:1 x Cargo Roller1 x Pair of Mounting Brackets1 x Pair of Carabiner BracketsInstallation HardwareFitting InstructionsMaterials used:Roller: Black powder coated steelRoller Coating: BM260 rubberShaft: Black powder coated steelBearing: NylonProduct Dimensions:496mm (19.5") L x 98mm (3.9") W x 92mm (3.6") HWeight:2kg (4.4lbs)Load Rating:40kg (88.2lbs)

Upright bike carrier, made from strong steel and aluminum. Powder-coated in the same durable finish as the Front Runner rack and load bars for durability. Front fork clamp features a quick release that fits all standard fork dropouts. Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires. Quickly secure and adjust the rear wheel with the robust ratcheting buckle and strap. Note: Fitment to a rack requires a minimum rack length of 1156mm (6 slats). Note: This solution is not compatible with Boost Hubs/Forks. Features Consists of: 1 x Fork Clamp 1 x Rear Wheel Holder Installation Hardware Fitting Instructions Materials used: Black powder coated steel & aluminum Rubber ladder strap Plastic ratchet buckle Overall Product Dimensions: 300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H Rear Holder: 230mm (9.1") L x 176mm (6.9") W x 81mm (3.2") H Front Clamp: 70mm (2.8") L x 152mm (6") W x 114mm (4.5") H Weight: 1.6kg (3.5lbs)

A two step ladder extension that slots into the existing ladder. Retractable, like the existing ladder. Made from sturdy aluminum. Foot friendly treads. Features Product Dimensions: L 570mm (22.4") x W 370mm (14.6") x H 70mm (2.8") Weight: 1.68kg (3.7lbs)

More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.   Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points. Includes Additional Tray Slat Bolts secure extra slat to your Slimline II Rack Tray. This slat will work with any Front Runner Slimline II Rack that is 1475mm wide. Can also be used to build a custom Load Bar Kit, or as a replacement slat. Features T-slots on both the top and bottom faces. A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.  Made from the same black powder coated aluminum as all Front Runner Racks. Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1475 - 1475mm Slat Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2kg (4.41lbs)Shipping Dimensions:Width: 110mm (4")Length: 1480mm (58")Height: 70mm (3")Shipping Weight:Weight: 2.36kg (5lbs)

A roof top tent negates the major hassle of pitching (and breaking down) a tent and also keeps you off the cold ground. Our Roof Top Tent weighs only 43kg and sleeps two comfortably. Use these mounting brackets to attach it to your Front Runner roof rack. These shorter brackets match the Roof Rack's low profile for a clean aesthetic. Mount most roof top tents to the Roof Rack with these shorter brackets (30mm H) to match the rack’s low profile. Black powder-coated steel. Pre-cut mounting holes. Mounting pieces (eg. bolts and nuts) included. Consists of:6 x Tent Mount Kit Brackets Materials used:2mm (0.078") Black powder coated steelProduct Dimensions:245mm (9.6") L x 60mm (2.4") D x 30mm (1.2") HWeight:2.1kg (4.6lbs)

Brighten up the road ahead and extend your adventures into the later hours with the 10” LED Light Bar. The light bar is constructed for durability and designed for versatility, both mounted onto Front Runner roof racks and for other off-vehicle uses. Six high-performance LEDs provide better visibility with 2520 raw lumen and 6000 kelvin color. Provides 120 degree flood beam pattern for close but wide range illumination immediately surrounding the vehicle. This auxiliary light is equipped with a robust polycarbonate lens set in a die cast aluminum housing. The 12V/24V LED Light Bar is versatile in application and is not limited to automotive use only. Special regulations and legislation within each country should be taken into consideration before use. Expected LED life of 30,000 hours. Secures to your Front Runner roof rack with the LED 10inch Light Bar Bracket.   Consists of:1 x 10" Light Bar1 x Bracket Set Materials used:Diecast aluminum housingPolycarbonate lensZinc alloy brackets Product Dimensions:Light Bar:270mm (10.6") L x 58mm (2.3") W x 56mm (2.2") H Light Bar with supplied bracket:270mm (10.6") L x 58mm (2.3") W x 70mm (2.8") H Weight:17.4 kg (38.4lbs) Special Notes:6pcs*5w high intensity CREE LEDSPower Consumption: 30WOperating Voltage: 10-30 DCWaterproof rate: IP 67Raw Lumen: 2520lmEffective lumen: 1740lmCurrent draw:12V/2.40A；24V/1.12ALife span:30000HColor Temperature: 6000K

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 3/4" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications.  Product highlights: 4" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 3/4" silk dome tweeter handles up to 45 watts RMS (140 watts peak power) frequency response: 97-40,000 Hz sensitivity: 86 dB grilles not included warranty: 1 year MFR # S2-S40 Item # 500S2S40 What's in the box: Two 2-way speakers Two 4x6 Adapter brackets Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive backed gaskets Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

Our new stackable storage boxes are made from impact-resistant plastic, and now feature new extra-secure latching, providing extra durability so your gear will stay safe even when your rig gets dirty. If you have extra cargo, ordering this twin set adds even more value to your storage. These plastic, workable sized storage boxes are easy to arrange in a cargo bed and vertical-sided to avoid wasted space. They stack securely for convenient storage in your vehicle thanks to the lids fitting neatly into the base of the box above it. A set of 2 Wolf Pack Pro storage boxes. Made from black, impact-resistant plastic. Features new extra-secure latches sealing the Wolf Pack Pro. Integrated grips for easy carrying. Versatile. Use in the cargo bed, truck/boot, or on your roof rack. Suitable for exterior storage. Wolf Pack Pros form the heart of many Front Runner storage systems. The Front Runner Transit Bags hold 2-3 Wolf Pack Pros depending on Transit Bag size and Wolf Pack configuration. Front Runner Wolf Pack Drawer Systems provide a comprehensive and practical vehicle storage solutions. For a padded storage solution, line the Wolf Pack Pro with a Flat Pack or Storage Box Foam Dividers to protect camera gear, kitchenware and other fragile items. Use in conjunction with Wolf Pack Pro Rack Mounting Brackets or Stratchits as well as Black Tie Down Rings / Eye Nuts for a safe and secure roof rack storage solutions. Wolf Pack Pro are not stackable with Wolf Pack. PLEASE NOTE:Due to varying internal air pressure, the lid of the Wolf Pack Pro may occasionally prove difficult to open due to its sealing ability. To open, apply moderate pressure to the lid with one hand directly next to the latch, checking the latch is properly closed before unlatching. To view a demonstration, please view video in the videos tab above. Consists of:2 x Wolf Pack Pro Materials used:Polypropylene black plastic Product Dimensions: (Per Unit)External Dimensions:510mm (20.1") L x 400mm (15.7") W x 230mm (9.1") H Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H Weight: (Per Unit)3.65kg (8.1lbs)

More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.   Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points. Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray. This slat will work with any Front Runner Slimline II Rack that is 1425mm wide. Can also be used to build a custom Load Bar Kit, or as a replacement slat. Features T-slots on both the top and bottom faces. A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment. Made from the same black powder coated aluminum as all Front Runner Racks. Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1425 - 1425mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.93kg (4.25lbs)Shipping Dimensions:Width: 110mm (4")Length: 1430mm (56")Height: 70mm (3")Shipping Weight:Weight: 2.26kg (5lbs)

Free up interior space with this sturdy, flexible, lightweight and large roof top storage bag. Ideal for clothes, camping gear, Front Runner Wolf Pack and Cub Pack storage containers, and whatever else would normally be carried in your trunk or cabin.   Manufactured from a durable 600d fabric which is 100% UV protected, dust proof and water resistant. Nylon stitching ensures no rotting or deterioration when exposed to the elements. Overlapping fabric lip with velcro seal to protects heavy duty zipper from dust and debris. 1100g PVC base is built to withstand the toughest journeys on top of the roof. 6 Triple-stitched tags for looping through Stratchits (or similar straps) and securing the bag to a Front Runner roof rack or other cargo carriers. 2 rubber-molded carry handles make for easy transport to your camp or lodging and hassle-free handling when loading or removing from the roof top. 1050mm / 41.3 in width. Designed to fit 2 Wolf Pack, up to 3 Cub Pack, or up to 2 Flat Pack. Folds compact. Consists of:1 x Large Transit BagMaterial used:600d CanvasProduct Dimensions:Open Dimensions:1050mm (41.3") L x 440mm (17.3") W x 300mm (11.8") HFolded Dimensions:470mm (18.5") L x 330mm (13") W x 50mm (2") HWeight:1.46kg (3.4lbs)

The Expander Camping Chair is praised for its high-quality materials, excellent design, and compact size, making it a durable and comfortable option for camping. Customers appreciate its easy folding and fast shipping, along with its classy appearance and minimal space requirements.

Designed to mount bikes with 100/110mm x 12mm, 100/110mm x 15mm, and 110/110mm x 20mm thru-axles (Boost) Compatible with pinch style forks such as Fox40, Manitou Dorado and Marzocchi 380 Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires. Rear wheel holder features a ratchet buckle and strap that allows fast adjustment Works with Front Runner Racks and Load Bars Made from steel and aluminum and powder-coated for durability and longevity Note: Installation requires a minimum rack length of 1156mm (six slats). Features Consists of: 1 x Front Fork Mount 1 x Rear Wheel Mount 1 x Pair of inserts for 12mm 100/110 Thru Axle 1 x Pair of Inserts for 15mm 100/110 Thru Axle 1 x Pair of inserts for 20mm 100/110 Thru Axle Installation Hardware Fitting Instructions Materials used: Black powder coated steel Black powder coated aluminum Product Dimensions: 300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H Weight: 1.5kg (3.3lbs)

Front Runner Spare Wheel Lock / Toyota Hilux 2005 - 2015