MSA
MSA 4x4 E1030 GENERIC LEFT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
MSA E1030 GENERIC LEFT STORAGE DRAWER SYSTEM-E1030-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 300 SERIES RIGHT STORAGE DRAWER
$1,485.90
$1,651.00
MSA LANDCRUISER 300 SERIES RIGHT STORAGE DRAWER-41012
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 433mm
MSA
MSA 4X4 E1350 GENERIC DOUBLE STORAGE DRAWER SYSTEM
$2,876.40
$3,196.00
MSA 4X4 E1350 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E1350-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 NAVARA NP300 LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA NAVARA NP300 LEFT STORAGE DRAWER SYSTEM-E1350-NAV300-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 E700 GENERIC LEFT STORAGE DRAWER SYSTEM
$1,242.01
$1,380.01
MSA E700 GENERIC LEFT STORAGE DRAWER SYSTEM-E700-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 700mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 590mm
Internal drawer width = 525mm
MSA
MSA 4x4 E700 GENERIC RIGHT STORAGE DRAWER SYSTEM-E700-RIGHT
$1,242.01
$1,380.01
MSA E700 GENERIC RIGHT STORAGE DRAWER SYSTEM-E700-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 700mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 590mm
Internal drawer width = 525mm
MSA
MSA 4X4 EVEREST LEFT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
MSA EVEREST LEFT STORAGE DRAWER SYSTEM-E930-EVERES-LEFT-COM
SUITS Ford Everest 7 Seat Model, No removable wing/face panels
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA
MSA 4x4 1350 RIGHT STORAGE DRAWER MODULE
$1,152.91
$1,281.01
MSA 1350 RIGHT STORAGE DRAWER MODULE -E1350-RIGHT
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
MSA
MSA 4x4 E1350 GENERIC LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA E1350 GENERIC LEFT STORAGE DRAWER SYSTEM-E1350-LEFT-COM
VEHICLE DATE: Generic Fit
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1100mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA
MSA 4x4 BT50 LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA BT50 LEFT STORAGE DRAWER SYSTEM-41002
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 HILUX 7TH GEN RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA HILUX 7TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX7-RI-COM
SUITS: Toyota HiLux 7th Gen
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 D-MAX RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA D-MAX RIGHT STORAGE DRAWER SYSTEM-41006
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 D-MAX LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA D-MAX LEFT STORAGE DRAWER SYSTEM-41005
SUITS: Isuzu D-MAX RG
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 76 SERIES RIGHT STORAGE DRAWER SYSTEM
$1,239.30
$1,377.00
MSA LANDCRUISER 76 SERIES RIGHT STORAGE DRAWER SYSTEM-E930A-LC76-RIGHT-COM
SUITS: Toyota LandCrusier 76 Series
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA
MSA 4X4 NAVARA D22 LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA NAVARA D22 LEFT STORAGE DRAWER SYSTEM-E1350-NAVD22-LE-COM
SUITS: Nissan Navara D22
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 HILUX 7TH GEN DOUBLE STORAGE DRAWER SYSTEM
$2,876.40
$3,196.00
MSA 4X4 HILUX 7TH GEN DOUBLE STORAGE DRAWER SYSTEM-E1350-HILUX7-COM
SUITS: Toyota HiLux 7th Gen
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 BT50 RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA BT50 RIGHT STORAGE DRAWER SYSTEM-41003
SUITS: Mazda BT50
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 NAVARA D22 RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA NAVARA D22 RIGHT STORAGE DRAWER SYSTEM-E1350-NAVD22-RI-COM
SUITS: Nissan Navara D22
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA
MSA 4X4 AMAROK AD BLUE RIGHT STORAGE DRAWER SYSTEM -E1350-VWROKAB-RI-COM
$1,437.30
$1,597.00
MSA AMAROK AD BLUE RIGHT STORAGE DRAWER SYSTEM -E1350-VWROKAB-RI-COM
SUITS: Volkswagon Amarok 2H (Ad Blue)
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 E930 GENERIC RIGHT STORAGE DRAWER SYSTEM
$1,239.30
$1,377.00
MSA E830 GENERIC RIGHT STORAGE DRAWER SYSTEM -E830-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM
$2,529.01
$2,810.01
MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC100-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA
MSA 4X4 NAVARA NP300 DOUBLE STORAGE DRAWER SYSTEM-
$2,876.40
$3,196.00
MSA 4X4 NAVARA NP300 DOUBLE STORAGE DRAWER SYSTEM-E1350-NAV300-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 PATROL Y62 LEFT STORAGE DRAWER SYSTEM
$1,580.40
$1,756.00
MSA PATROL Y62 LEFT STORAGE DRAWER SYSTEM-41008
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1110mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA
MSA 4X4 HILUX 8TH GEN RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA HILUX 8TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX8-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA
MSA 4X4 AMAROK AD BLUE LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA AMAROK AD BLUE LEFT STORAGE DRAWER SYSTEM -E1350-VWROKAB-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 E1030 GENERIC RIGHT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
MSA E1030 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1030-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 FORD RANGER LEFT STORAGE DRAWER SYSTEM
$1,444.51
$1,605.01
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 E830 GENERIC RIGHT STORAGE DRAWER SYSTEM
$1,253.70
$1,393.00
MSA E830 GENERIC RIGHT STORAGE DRAWER SYSTEM -E830-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 830mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 715mm
Internal drawer width = 525mm
MSA
MSA 4X4 NAVARA NP300 RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA NAVARA NP300 RIGHT STORAGE DRAWER SYSTEM-E1350-NAV300-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 FORTUNER DOUBLE STORAGE DRAWER SYSTEM-E930-FORTUN
$2,529.01
$2,810.01
MSA 4X4 FORTUNER DOUBLE STORAGE DRAWER SYSTEM-E930-FORTUN-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA
MSA 4X4 TRITON MQ RIGHT STORAGE DRAWER SYSTEM-E1350-TRITMQ-RI
$1,437.30
$1,597.00
MSA TRITON MQ RIGHT STORAGE DRAWER SYSTEM-E1350-TRITMQ-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM
$1,239.30
$1,377.00
MSA LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM-E930A-LC76-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA
MSA 4X4 FORD RANGER RIGHT STORAGE DRAWER SYSTEM
$1,444.51
$1,605.01
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 NAVARA D23 RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA NAVARA D23 RIGHT STORAGE DRAWER SYSTEM-41018
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 TRITON MQ DOUBLE STORAGE DRAWER SYSTEM-E1350-TRITMQ
$2,876.40
$3,196.00
MSA 4X4 TRITON MQ DOUBLE STORAGE DRAWER SYSTEM-E1350-TRITMQ-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 D-MAX & COLORADO LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA D-MAX & COLORADO LEFT STORAGE DRAWER SYSTEM-E1350-COLORG-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 PATROL Y62 DOUBLE STORAGE DRAWER SYSTEM
$3,175.20
$3,528.00
MSA 4X4 PATROL Y62 DOUBLE STORAGE DRAWER SYSTEM-41007
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1110mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height
215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA
MSA 4X4 E700 GENERIC DOUBLE STORAGE DRAWER SYSTEM
$2,507.40
$2,786.00
MSA 4X4 E700 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E700-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 700mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 590mm
Internal drawer width = 525mm
MSA
MSA 4X4 FORTUNER LEFT STORAGE DRAWER SYSTEM-E930
$1,264.50
$1,405.00
MSA FORTUNER LEFT STORAGE DRAWER SYSTEM-E930-FORTUN-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
XTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA
MSA 4X4 D-MAX SX/LS/XTERRAIN FRONT & REAR SEAT COVERS
$781.20
$868.00
MSA 4x4 D-MAX SX/LS/Xterrain Front & Rear Seat Covers- 21003
Complete front and rear covers - (21001 + 21002)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 FORD RANGER PY DUAL CAB XL/XLS REAR SEAT COVERS
$363.60
$404.00
MSA 4x4 Ranger PY Dual Cab XL/XLS Rear Seat Covers- 21042
Dual Cab XL/XLS Bench Seat with 3 x Head Rests and No Armrest, Child Seat Holes on Base
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 FORD RANGER PY XL/XLS SINGLE CAB, SUPER/DUAL CAB FRONT SEAT COVERS
$458.10
$509.00
MSA 4x4 Ranger PY XL/XLS Single Cab, Super/Dual Cab Front Seat Covers -21041
Single, Super & Dual Cab XL/XLS Driver x 2 Airbags, Passenger x 1 Airbag with Console
Cover and Integrated Lumber Support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 LANDCRUISER 100 SERIES FRONT & SECOND ROW SEAT COVERS
$391.50
$435.00
MSA 4x4 LandCruiser 100 Series Front & Second Row Seat Covers- 10002
Front bucket and 3/4 bench seats with F/D armrest cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 75 SERIES LC75 LANDCRUISER FRONT SEAT COVERS
$379.80
$422.00
MSA 4x4 75 Series LC75 LandCruiser Front Seat Covers - 7502
SUITS: Landcruiser 75 Series LC75 Standard Ute + Landcruiser 75 Series LC75 Personnel Carrier
Front twin bucket and 3/4 bench seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 FORD RANGER PX3 DUAL CAB FRONT & SECOND ROW SEAT COVERS
$828.00
$920.00
MSA 4x4 Ranger PX3 Dual Cab Front & Second Row Seat Covers - 21022
Complete front and second row seat set - (21018 + 21021)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 LANDCRUISER 78 SERIES FRONT SEAT COVERS
$379.80
$422.00
MSA 4x4 Landcruiser 78 Series Front Seat Covers - 78907
SUITS:
Landcruiser 78 (08/12-09/16) Troop Carrier Workmate/GXL + Landcruiser 79 (08/12-09/16) Single/Dual Cab Workmate/GX/GXL
Includes: Front twin bucket and 3/4 bench seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 FORD RANGER & MAZDA BT50 SINGLE CAB FRONT SEAT COVERS
$458.10
$509.00
MSA 4x4 Ranger & BT50 Single Cab Front Seat Covers- FRT516
SUITS:
Ranger PX2 (08/16-07/19) Inc. Facelift Model Dual Cab/XLT +Ranger PX2 (08/16-07/19) Inc. Facelift Model Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + BT50 (06/18-09/20) XT Dual Cab (Facelift) + BT50 (06/18-09/20) XTR Dual Cab/Freestyle Cab (Facelift) + BT50 (01/17-05/18) Series 2 Dual Cab XTR/XT/Freestyle XTR/XT Single Cab
Includes: Front twin bucket airbag seats with driver side only lumbar lever, console cover and integrated lumbar support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 HILUX 8TH GEN SR5/SR DUAL CAB FRONT & SECOND ROW SEAT COVERS
$873.00
$970.00
MSA 4x4 HiLux 8th Gen SR5/SR Dual Cab Front & Second Row Seat Covers- HL6560CO
SUITS: HiLux 8th Gen SR5/SR Dual Cab
Complete front and second row seat set - (HL65 + HL60)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 PATROL WAGON FRONT & SECOND ROW SEAT COVERS
$880.20
$978.00
MSA 4x4 Patrol Wagon Front & Second Row Seat Covers- GU403CO
SUITS: MSA 4x4 Patrol Wagon Front & Second Row Seat Covers- GU403CO
Complete front and second row seat set - (GU40 + GU43)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$439.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
