FRONT RUNNER Toyota Tundra (3Rd Gen) 4 Door Crewmax 5.5'...
$1,348.20
$1,498.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tundra, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT002S - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-Current) Pro Bed System
Consisting of:
1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT002 - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 54.74kg (120.68lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1490mm (59")
Height: 340mm (13")
Shipping Weight:
Weight: 59kg (130lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,527.20
$2,808.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 2570mm/101.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:4x FASS025 - Foot Set / 70mm - 80mm1x RRSTG13 - SLII Tray - 1345mm(W)X2570mm(L)2x TRCA003 - Canopy Tracks / 1150mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 42.83kg (94.42lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 44.2kg (97lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,653.20
$2,948.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 2772mm/109.1" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTG14 - Slimline II Tray - 1345mm(W) X 2772mm(L) - by Front Runner2 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 40kg (88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1345mm (53")Length 2772mm (109")Height 70mm (3")
Shipping Weight:
Weight 46.4kg (102.1lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,023.30
$1,137.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 752mm/29.6" (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 750mm/29.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:2x FASS025 - Foot Set / 70mm - 80mm1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L)1x TRCA005 - Canopy Tracks / 750mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 18.41kg (40.59lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 22.6kg (50lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,534.50
$1,705.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 3 x 140mm/5.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner3 x TRCA008 - Universal 140mm Tracks - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1425mm (56")Length 1358mm (53")Height 70mm (3")
Shipping Weight:
Weight 28.2kg (62.1lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,719.00
$1,910.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1560mm/61.4" (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 1600mm/63” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)1x TRCA010 - Canopy Tracks / 1600mm (L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.54kg (62.92lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 265mm (10")Shipping Weight:Weight: 34.6kg (76lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,487.60
$2,764.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 2368mm/93.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ12 - Slimline II Tray - 1425mm(W) X 2368mm(L) - by Front Runner2 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 38kg (83lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1425mm (56")Length 2368mm (93")Height 70mm (3")
Shipping Weight:
Weight 43.9kg (96.5lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,622.60
$2,914.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 2570mm/101.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ13 - Slimline II Tray - 1425mm(W) X 2570mm(L) - by Front Runner2 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 40kg (88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1425mm (56")Length 2570mm (101")Height 70mm (3")
Shipping Weight:
Weight 46.4kg (102.0lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,746.90
$1,941.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1762mm/69.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM09 - Slimline II Tray - 1475mm(W) X 1762mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 27kg (60lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 1762mm (69")Height 70mm (3")
Shipping Weight:
Weight 32.0kg (70.3lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,219.40
$2,466.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1762mm/69.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM09 - Slimline II Tray - 1475mm(W) X 1762mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 27kg (60lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 1762mm (69")Height 70mm (3")Shipping Weight:
Weight 32.0kg (70.3lbs)
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack...
$2,012.40
$2,236.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1762mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount3x RRAC962 - Track Mount Stud Plate1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.47kg (64.97lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18")Length: 1730mm (68")Height: 235mm (9")Shipping Weight:Weight: 34.59kg (76lbs)
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack...
$1,743.30
$1,937.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner
Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 30.4kg (67.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1730mm (68.0")Height: 240mm (9.0")
Shipping Weight:31.2kg (69.0lbs)
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack...
$1,860.30
$2,067.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 32.6kg (71.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1730mm (68.0")Height: 240mm (9.0")
Shipping Weight:33.0kg (73.0lbs)
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack...
$2,016.90
$2,241.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Isuzu D-Max when fitted with a EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT006 - Isuzu D-Max (2012-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK017 - Roof Load Bar Pair 1475mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.24kg (18.17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1585mm (62")
Height: 165mm (6")
Shipping Weight:
Weight: 8.6kg (19lbs)
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$1,861.20
$2,068.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1560mm/61.4" (L)), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*This rack fits a load bed width of 1495mm - 1575mm (58-62") and length of 1551mm - 1803mm (61-71").For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner1 x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 32.5kg (71.4lbs)
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$1,902.60
$2,114.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1560mm/61.4" (L)), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1560mm/61.4" (L)), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*This rack fits a load bed width of 1576mm - 1625mm (62-64") and length of 1551mm - 1803mm (61-71").For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRLB012T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1475(W) x 1560(L) - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner1 x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 33.0kg (72.6lbs)
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$2,396.70
$2,663.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1"(W) x 1964mm/77.3"(L)), 2 Tracks, and 8 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*This rack fits a load bed width of 1576mm - 1625mm (62-64") and length of 2033mm - 2438mm (80-96").For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar
Consisting of:
4 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner1 x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 36kg (79lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 42.0kg (92.4lbs)
FRONT RUNNER Dodge Ram Mega Cab 4-Door Ute (2009-Current) Slimline...
$2,255.40
$2,506.00
This kit creates a full size rack that sits above your Dodge Ram Mega Cab's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)1x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.91kg (61.53lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 33.25kg (73lbs)
FRONT RUNNER Gmc Canyon Ute (2004-Current) Slimline Ii Load Bed...
$1,633.50
$1,815.00
This kit creates a full size rack that sits above your GMC Canyon 2004+ truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")Shipping Weight:
Weight 30.1kg (66.1lbs)
FRONT RUNNER Gmc Sierra Ute (1987-Current) Slimline Ii Load Bed...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your GMC Sierra Pick-Up Truck 1987+ truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 455mm (18")Length 1610mm (63")Height 280mm (11")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Toyota Tacoma Regular Cab 2-Door Ute (1995-2000) Slimline...
$1,633.50
$1,815.00
This kit creates a full size rack that sits above your Toyota Tacoma's Regular Cab 2-Door (1995-2000) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
FRONT RUNNER Toyota Tacoma Xtra Cab 2-Door Ute (2001-Current) Slimline...
$1,633.50
$1,815.00
This kit creates a full size rack that sits above your Toyota Tacoma's Xtra Cab 2-Door (2001-Current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
FRONT RUNNER Toyota Tundra Access Cab 2-Door Ute (1999-2006) Slimline...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Toyota Tundra Access Cab 2-Door (1999-2006)'s truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Toyota Tundra Crew Cab 4-Door Ute (2007-Current) Slimline...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Toyota Tundra Crew Cab 4-Door's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Bakkie Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Toyota Tundra Crew Max Ute (1999-Current) Slimline Ii...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Toyota Tundra Pickup Truck (1999-Current)'s truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.While Front Runner racks and mounting systems have been engineered and built to hold 660 lbs/299kgs, this may exceed your vehicle manufacturers’ recommendations. Until all vehicle components are made as off-road tough as Front Runner’s, we suggest contacting your vehicle maker to check load limits before aggressive loading of the rack.For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Toyota Tundra Regular Cab 2-Door Ute (2007-Current) Slimline...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Toyota Tundra Regular Cab's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1915mm (75")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Volkswagen Amarok (2010-2022) Slimline Ii Roof Rack Kit...
$1,426.50
$1,585.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Amarok. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FAVA001 - Volkswagen Amarok Foot Rails - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Volkswagen T2 Transporter/Kombi Slimline Ii Roof Rack Kit...
$2,849.40
$3,166.00
This 2772mm/109.1" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T2 Kombi contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS110 - No 10 Leg 280mm (Pair)1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 50.76kg (111.9lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Weight: 450mm (18")Length: 1720mm (68")Height: 290mm (11")Shipping Weight:Weight: 50.8kg (112lbs)
FRONT RUNNER Volkswagen T3 Transporter/Kombi Slimline Ii Roof Rack Kit...
$2,763.00
$3,070.00
This 2772mm/109.1" long full-size Slimline II cargo carrying roof rack kit for your Volkswagen T3 Transporter/Kombi contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 42kg (92lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 48.8kg (107.3lbs)
FRONT RUNNER Volkswagen T4 Transporter (1990-2003) Slimline Ii Roof Rack...
$2,698.20
$2,998.00
This 2772mm/109.1" long full-size Slimline II cargo carrying roof rack kit for the Volkswagen T4 Transporter (1990-2003) contains Slimline II Tray, Wind Deflector, 2 Tracks and 8 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
For further information on installation, please see the fitment instructions in the INSTALL tab.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x FASS024 - Foot Set / 50mm-60mm - by Front Runner2 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRAC905 - Volkswagen T4 Transporter RR Installation Kit1 x RRSTD14 - Slimline II Tray - 1255mm(W) X 2772mm(L) - by Front Runner2 x TRAC002 - Universal Track / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 40kg (88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 455mm (18")Length 1610mm (63")Height 285mm (11")
Shipping Weight:
Weight 46.6kg (102.5lbs)
FRONT RUNNER Volkswagen T5 Transporter Lwb (2003-2015) Slimline Ii 1/2...
$1,750.50
$1,945.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your 2003-2015 Volkswagen T5. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT002 - Volkswagen T5 Caravelle/Transporter LWB FR1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 36.33kg (80.09lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 36.21kg (80lbs)
FRONT RUNNER Volkswagen T5 Transporter Lwb (2003-2015) Slimline Ii Roof...
$2,717.10
$3,019.00
This 2772mm/109.1" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2003-2015 Volkswagen T5 LWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT002 - Volkswagen T5 Caravelle/Transporter LWB FR1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 52.47kg (115.68lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 620mm (24")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 52.02kg (114lbs)
FRONT RUNNER Volkswagen T5/T6 Transporter Swb W/Oem Tracks (2003-Current) Slimline...
$2,332.80
$2,592.00
This 2570mm/101.2" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T5/T6 SWB Transporter contains a Slimline II Tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x FASS028 - Foot Set / 85mm-95mm1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.69kg (87.5lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1720mm (68")Height: 180mm (7")Shipping Weight:Weight: 37.6kg (83lbs)
FRONT RUNNER Volkswagen T6/T6.1 Caravelle Transporter Swb (2015-Current) Slimline Ii...
$1,543.50
$1,715.00
Not every adventure requires a full-size rack. Free up space in your Volkswagen T6/T6.1 Caravelle Transporter SWB with this half-sized Slimline II Roof Rack Kit. The Slimline II’s lightweight, modular construction allows you to customize your setup with over 55 accessories. The kit features a Slimline II Tray, Wind Deflector, and 2 Foot Rails and installs directly onto your Caravelle’s existing factory mounting points.
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T6/T6.1. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT003 - Volkswagen T6/T6.1 Caravelle/Transporter FootRails1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.03kg (72.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 250mm (10")Shipping Weight:Weight: 33kg (73lbs)
FRONT RUNNER Volkswagen T6/T6.1 Caravelle Transporter Swb (2015-Current) Slimline Ii...
$2,524.50
$2,805.00
Free up space in your Volkswagen T6/T6.1 Caravelle Transporter SWB with this Slimline II Roof Rack Kit. The Slimline II’s lightweight, modular construction allows you to customize your setup with over 55 accessories so that you can gear up for any adventure. This particular cargo roof rack kit contains the full-size Slimline II Tray, Wind Deflector and 2 Foot Rails.
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T6/T6.1 Transporter. It easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT003 - Volkswagen T6/T6.1 Caravelle/Transporter FootRails1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 49.2kg (108.47lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 49kg (108lbs)
FRONT RUNNER Volkswagen T6/T6.1 Caravelle/Transporter Lwb (2015-Current) Slimline Ii 1/2...
$1,763.10
$1,959.00
Not every adventure requires a full-size rack. Free up space in your Volkswagen T6/T6.1 Caravelle/Transporter LWB (2015-Current) with this half-sized Slimline II Roof Rack Kit. The Slimline II’s modular construction allows to gear up for any adventure with a variety of accessories, such as under-rack mounted tables. This kit features a Slimline II Tray, Wind Deflector, and 2 Foot Rails and installs directly onto your Caravelle or Transporter’s factory mounting points.
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T6/T6.1. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAVT004 - Volkswagen T6/T6.1 Caravelle/Transporter LWB FR1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.4kg (82.45lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 38kg (84lbs)
FRONT RUNNER Volvo 200 Series 4 Door Wagon (1974-1993) Slimline...
$2,169.00
$2,410.00
Gear up your 1974-1993 Volvo 200 Series 4-Door Wagon for your greatest adventures with this Slimline II Roof Rack Kit. Installation is simple and drill-free, so you can get on the road as quick as you can strap your gear in.
This 2166mm/85.3" long, full-size, Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector, and eight (8) Gutter Mount Legs to mount the Slimline II Tray to your 1974-1993 Volvo 200 Series 4-Door Wagon.
Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty.*
For further information on installation, please see the Fitment Guide in the Install tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS027 - Leg Spacer 6mm (Pair)2x LASS101 - No 1 Leg 120mm (Pair2x LASS102 - No 2 Leg 130mm (Pair)1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 38.59kg (85.08lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 40kg (88lbs)
FRONT RUNNER Toyota Hilux (2015-Current) Slimsport Roof Rack Kit -...
$988.20
$1,098.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1386mm (54.6") x 1147mm (45.2").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182) for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Hilux H48 DC (2015-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack (RRAC213) is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KSTH002 - Toyota Hilux (2015-Curr) SlimSport Roof Rack Kit1x RRAC244 - Toyota Hilux H48(2015-Curr)SsportRack Wind Fairing1x RRAC971 - Protection Strip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions: 1386mm (54.6") L x 1147mm (45.2") W x 116mm (4.6") H
Approximate Installed Weight: 24.352537kg (53.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 160mm (06")
Shipping Weight:Weight: 25kg (55lbs)
FRONT RUNNER Toyota Hilux (2015-Current) Slimsport Roof Rack Kit Lightbar...
$988.20
$1,098.00
This low-profile flat deck Slimsport rack has a load carrying area of 1386mm (54.6") x 1147mm (45.2").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included in the Toyota Hilux DC Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTH004T - Toyota Hilux (2015-Current) Slimsport Roof Rack Kit Lightbar ready - by Front Runner
Consisting of:
1x KSTH002 - Toyota Hilux (2022-Curr) SlimSport Roof Rack Kit
1x RRAC245 - Toyota Hilux Slimsport Rack 40" L Bar Wind Fairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.352537kg (53.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 160mm (06")
Shipping Weight:
Weight: 25kg (55lbs)
FRONT RUNNER Toyota Hilux (2016-Current) Egr Rolltrac Slimline Ii Load...
$1,716.30
$1,907.00
This kit creates a full-size rack that sits above your Toyota Hilux's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT041T - Toyota Hilux (2016-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.46kg (67.15lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 33.2kg (73lbs)
FRONT RUNNER Toyota Hilux Legend Rs Slimline Ii Load Bed...
$1,213.20
$1,348.00
This kit creates a full size rack that sits above your Toyota Hilux Legend RS's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1156mm) and 4 feet that fit into the existing tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTH013T - Toyota Hilux Legend RS Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x FASS016 - Flat Feet (pair) / 65mm1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.29kg (51.35lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 23.8kg (52lbs)
FRONT RUNNER Toyota Hilux N50/N60/N70 4Th Gen (1984-1988) Slimline Ii...
$1,350.00
$1,500.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Hilux (1984-1988) contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTH001L - Toyota Hilux N50/N60/N70 4th Gen (1984-1988) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x LASS102 - No 2 Leg 130mm (Pair)
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 25.51kg (56.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 25.93kg (57lbs)
FRONT RUNNER Toyota Hilux Revo Dc (2016-2021) Slimline Ii Roof...
$1,430.10
$1,589.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo 2016+. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTH012T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATH003 - Toyota Hilux Revo DC(2016-Current) Foot Rails/Low1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.28kg (62.35lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 28.57kg (63lbs)
FRONT RUNNER Toyota Hilux Revo Extended Cab (2016-Current) Slimline Ii...
$1,069.20
$1,188.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTH022T - Toyota Hilux Revo Extended Cab (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATH006 - Toyota Hilux Revo ExCab(2016-Curr) Foot Rails/Low1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.78kg (45.81lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 275mm (11")
Shipping Weight:
Weight: 23kg (51lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,742.40
$1,936.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4" (W) x 1964mm/77.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1255mm (49")Length 1964mm (77")Height 70mm (3")
Shipping Weight:
Weight 32.4kg (71.2lbs)
FRONT RUNNER Volkswagen Crafter (L5H2/ Lwb Maxi/Oem Track) (2017-Current) Slimpro...
$3,022.20
$3,358.00
Revitalize your Volkswagen Crafter van's carrying potential with this sturdy roof rack kit. Whether you're setting off on a grand van-life adventure, escaping for the weekend, or transporting essential equipment, this streamlined heavy-duty rack is designed to shoulder sizeable loads. The Slimpro Van Rack is equipped to effortlessly handle your gear and facilitate the seamless mounting of Front Runner accessories in various setups.
Compatible with the Volkswagen Crafter (L5H2/ LWB Maxi/OEM Track) (2017-Current) vans with an OEM Track with a vehicle length of 7391mm / 291".
Load-carrying area: 4534mm (178.5") x 1456mm (57.3").
Fourteen (14) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 116mm (4.6") height, or left in standard configuration at 158mm (6.2").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVVC006T - Volkswagen Crafter (L5H2/ LWB Maxi/OEM Track) (2017-Current) Slimpro Van Rack Kit
Consisting of:
7x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
6x RRNS1345 - Narrow Slat / 1345mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
2x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
4535mm (178.5") L x 1455mm (57.3") W x 132mm (5.2") H
Approximate Installed Weight: 45.98kg (101.37lbs)
Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 53kg (117lbs)
FRONT RUNNER Volkswagen Multivan (T7) Swb (2022-Current) Slimline Ii Roof...
$2,423.70
$2,693.00
This 2368mm/93.22" long, full-size Slimline II cargo-carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T7 Caravelle/Transporter SWB. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVT021T - Volkswagen T7 Caravelle Transporter SWB (2022-Current) Slimline II Roof Rack Kit
Consisting of:
1x FAVT006 - Volkswagen T7 Caravelle/Transporter SWB (22-Curr) Foot Rails
1x RRSTG12 - SLII Tray - 1345mm(W)X2368mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.51kg (91.51lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 46kg (101lbs)
FRONT RUNNER Ute Stainless Steel Water Tank For Drawer System...
$2,462.40
$2,736.00
This 2772mm/109.1" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T5/T6 Transporter LWB contains a Slimline II Tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This Kit required the OEM tracks for installation.
Features
KRVT015T - Volkswagen T5/T6 Transporter LWB w/OEM Tracks (2003-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4x FASS017 - Foot Set / 75mm-85mm1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.84kg (92.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 230mm (9")
Shipping Weight:
Weight: 47.6kg (105lbs)
FRONT RUNNER Toyota Hilux Revo Dc (2016-Current) Track And Feet...
$1,416.60
$1,574.00
This kit consists of two (4) x Tent Brackets
Works with both Front Runner Roof Racks and Front Runner Load Bars and fits a wide variety of hard shell tents including various ranges from James Baroud and Autohome.
These brackets let you mount your James Baroud or Autohome tents with the proper lateral support, even if your rack is narrower or wider than your tent base.
When fitting a James Baroud or Autohome tent to a rack that is smaller (narrower, shorter or both) than your tent base footprint, the included spacer raises the mounting height of the tent so it rests on the edge of the racks side profiles for full support.
When mounted to a rack that is larger (longer and wider) than your tent base footprint, the brackets position your tent flush on the rack for full support and use of the included spacer isnt required.
Supplied with all installation hardware and fitting instructions.
Features
Consists of:
4 x Tent Brackets
4 x James Baroud Channel Plates
4 x Auto Home Channel Plates
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions: (Per Bracket)
140mm (5.5") L x 23.5mm (0.9") W x 81mm (3.2") H
Weight: (Per Pair of Brackets)
1.6kg (3.5lbs)
FRONT RUNNER Toyota Hilux Revo Double Cab (2016-Current) Pro Bed...
$2,445.30
$2,717.00
Up your Toyota Hilux Revo's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Toyota Hilux Revo Pro load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/ Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Toyota Hilux Revo Pro with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTH001T - Toyota Hilux Revo Double Cab (2016-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBTH001S - Toyota Hilux Revo Pro Bed Rack (2016 - Current) Pr
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 70.3kg (154.98lbs)
Shipping Dimensions:
Width: 640mm (25")
Length: 1720mm (68")
Height: 470mm (19")
Shipping Weight:
Weight: 82kg (180lbs)
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6...
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
