TORQIT Power Module: 4Wd Performance Chip For D22 2.5L Navara...
$1,701.00
$1,890.00
TORQIT POWER MODULE PLUS FOR NISSAN NAVARA D22 2.5L: 12/2007
PERFORMANCE GAIN: 23KW / 68NM
The D22 2.5L, Navara Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicles onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. Youll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you're towing, the Torqit Power Module ensures you get the most life possible out of your vehicle's engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia's first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you're always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit's unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle's response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
INSTALLATION
The Torqit Power Module can be installed in most petrol and diesel vehicles. The unit is fitted between two plugs in your vehicle's fuel operating system, with the simple set up process taking just 15 minutes.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle's engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
MSA Nissan Navara Towing Mirrors D23 (Chrome, Electric) Nov 2020...
$789.30
$877.00
NISSAN NAVARA D23 TOWING MIRRORS (CHROME, ELECTRIC)
Year: Nov 2020 - CurrentModel: Nissan Navara D23 (Chrome, Electric)Part Number: TM1701
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
MSA Nissan Navara D23 Towing Mirrors (Black, Heated, Electric, Indicators,...
$882.90
$981.00
Description
NISSAN NAVARA D23 TOWING MIRRORS
Year: Nov 2020 - CurrentModel: Nissan Navara D23 (Black, Heated, Electric, Indicators, Blind Spot Monitoring)Part Number: TM1703
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
MSA Nissan Navara D23 Towing Mirrors (Black, Electric) Nov 2020...
$789.30
$877.00
NISSAN NAVARA D23 TOWING MIRRORS (BLACK, ELECTRIC)
Year: Nov 2020 - CurrentModel: Nissan Navara D23 (Black, Electric)Part Number: TM1700
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
MSA Nissan Navara D23 Towing Mirrors (Black, Heated, Electric, Indicators,...
$882.90
$981.00
NISSAN NAVARA D23 TOWING MIRRORS (BLACK, HEATED, ELECTRIC, INDICATORS, BLIND SPOT MONITORING)
Year: Nov 2020 - CurrentModel: Nissan Navara D23 (Black, Heated, Electric, Indicators, Blind Spot Monitoring)Part Number: TM1702
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
TORQIT Power Module To Suit Nissan D22 Navara - CRMQ1011
$1,701.00
$1,890.00
TORQIT POWER MODULE PLUS FOR NISSAN NAVARA D22 2.5L: 12/2007…
PERFORMANCE GAIN: 23KW / 68NM
The D22 2.5L, Navara Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicle’s onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. You’ll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you’re towing, the Torqit Power Module ensures you get the most life possible out of your vehicle’s engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia’s first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you’re always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit’s unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle’s response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
INSTALLATION
The Torqit Power Module can be installed in most petrol and diesel vehicles. The unit is fitted between two plugs in your vehicle’s fuel operating system, with the simple set up process taking just 15 minutes.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle’s engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
FATZ FABRICATION Np300 Navara Fabricated Washer Bottle. Required For Snorkel...
$460.00
NP300 Washer Bottle
With installation of snorkels on the Np300 Navara, there is often need to remove and replace the washer bottle, with an item outside the guard cavity. We have you covered on this, with our aluminium fabricated washer bottle. Powder coated in texture satin coat, to match our airbox. this unit solves the problem, and looks great in doing so. We supply a piggy back wiring harness to extend the wiring for the pump as needed, and the factory washer hose just re-routs, to connect in the new location. Mounting to existing mounting locations on the inner guard panel, there is no need for drilling during fitment.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Factory Airbox Adaptor For Fatz Snorkel....
$220.00
Fatz Fabrication NP300 Navara Factory Airbox Adaptor for Fatz Snorkel.-NP-FAB-ADP
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Element Air Filter. Additional...
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. No...
$1,390.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Air Filter. No Plumbing...
$1,390.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Rh Snorkel. Polished. Suit 3" Airbox...
$2,120.00
Np300/ D23 Navara 3″ Snorkel
The NP300/D23 Navara is a commonly customised vehicle, with great aftermarket accessory options on the market. In line with this, our Fatz Built NP300/D23 Navara snorkel is designed with aesthetics and fitment in mind. The guard cavity provides a couple of challenges with minimal room, and the factory washer bottle to contend with. We have this sorted with the design of our snorkel, allowing for ample clearance, to fit plumbing through the guard without hard contact with body panels, or manipulating silicone bends to make them fit. Our snorkels are built in 316 Grade, 3″ stainless steel, and finished to a seamless form for polishing or powder coating, depending on your preference. Plumbing to the Airbox in 3″ ducting, supplying ample air for the 2.3L engines. *Adaption kit, and Fatz Built washer bottle are required to plumb to the factory airbox, due to the entry location on the airbox, and ECU mounting location. Option these at checkout for a complete installation kit.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ slightly from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Rh Snorkel. Powder Coated Satin Black....
$2,120.00
Np300/ D23 Navara 3″ Snorkel
The NP300/D23 Navara is a commonly customised vehicle, with great aftermarket accessory options on the market. In line with this, our Fatz Built NP300/D23 Navara snorkel is designed with aesthetics and fitment in mind. The guard cavity provides a couple of challenges with minimal room, and the factory washer bottle to contend with. We have this sorted with the design of our snorkel, allowing for ample clearance, to fit plumbing through the guard without hard contact with body panels, or manipulating silicone bends to make them fit. Our snorkels are built in 316 Grade, 3″ stainless steel, and finished to a seamless form for polishing or powder coating, depending on your preference. Plumbing to the Airbox in 3″ ducting, supplying ample air for the 2.3L engines. *Adaption kit, and Fatz Built washer bottle are required to plumb to the factory airbox, due to the entry location on the airbox, and ECU mounting location. Option these at checkout for a complete installation kit.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ slightly from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,160.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,159.92
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$4,719.88
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,479.92
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
