MSA 4X4 Hilux 8Th Gen Left Storage Drawer System-E1350 -...
$1,437.30
$1,597.00
Suits Toyota HiLux 8th Gen
MSA HILUX 8TH GEN LEFT STORAGE DRAWER SYSTEM-E1350-HILUX8-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
XTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E1350 Generic Right Storage Drawer System - E1350-RIGHT-COM
$1,437.30
$1,597.00
MSA E1350 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1350-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E830 Generic Left Storage Drawer System - E830-LEFT-COM
$1,253.70
$1,393.00
MSA E830 GENERIC LEFT STORAGE DRAWER SYSTEM-E830-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 830mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 715mm
Intenral drawer width = 525mm
MSA 4X4 Amarok Left Storage Drawer System - E1350-VWROK-LE-COM
$1,437.30
$1,597.00
Suits Volkswagon Amarok 2H, Volkswagen Amarok
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Simgle Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Landcruiser 200 Series Right Storage Drawer System -...
$1,264.50
$1,405.00
Suits Toyota Landcruiser 200 Series GXL/VX/Sahara
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA 4X4 Prado 150 Series Right Storage Drawer System -...
$1,264.50
$1,405.00
SUITS: Toyota Landcruiser Prado 150 Series GXL 7 Seat Model/Kakadu/VX (No removable front face panel)
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 4X4 Landcruiser 200 Series Left Storage Drawer System -...
$1,264.50
$1,405.00
Suits Toyota Landcruiser 200 Series GXL/VX/Sahara
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA 4X4 Prado 120 Series Right Storage Drawer System -...
$1,264.50
$1,405.00
Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 4X4 E1100 Generic Left Storage Drawer System - E1100-LEFT-COM
$1,343.70
$1,493.00
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1100mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA 4X4 E1030 Generic Double Storage Drawer System - E1030-COM
$2,529.00
$2,810.01
LandCruiser 300 Series Double Storage Drawer
PRODUCT CODE: 41010
VEHICLE DATE: 07/2021-CurrentPRODUCT TYPE: Double Storage Drawer System
SUITS: Toyota Landcruiser 300 Series GXL/VX/SaharaToyota Landcruiser
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
MSA 4X4 E930A Generic Right Storage Drawer System - E930A-RIGHT-COM
$1,239.30
$1,377.00
MSA E930A GENERIC RIGHT STORAGE DRAWER SYSTEM -E930A-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA 4X4 Triton Mq Left Storage Drawer System - E1350-TRITMQ-LE-COM
$1,437.30
$1,597.00
MSA TRITON MQ LEFT STORAGE DRAWER SYSTEM-E1350-TRITMQ-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
FRONT RUNNER Cargo Slide/Fridge Slide / 80L To 90L- -...
$351.20
$439.00
Front Runner Fridge Slide 80L–90L
The Front Runner Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide convenient access to portable fridges, camping equipment, storage boxes, and touring gear. Ideal for 4WDs, canopies, caravans, ute trays, and drawer systems, this low-profile slide maximises accessibility while minimising the space required within your vehicle.
Featuring high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, making it easy to access your fridge and equipment without climbing into the vehicle. The rattle-free design and secure swivel latch locking mechanism help keep your cargo stable and secure during travel.
Constructed from durable black powder-coated steel and supplied with mounting hardware for wood and metal surfaces, this fridge slide is built to withstand demanding touring, camping, overlanding, and worksite conditions.
Features
Suitable for 80L–90L portable fridges
Heavy-duty 100kg load capacity
High-strength bearing drawer slide system
Nearly 100% tray extension for easy access
Low-profile design maximises storage space
Rattle-free operation during travel
Secure swivel latch locking system
Mounts to most flat surfaces
Compatible with Front Runner drawer systems
Pre-drilled mounting holes for easy installation
Includes mounting hardware for wood and metal surfaces
Durable black powder-coated steel construction
Specifications
Overall / Closed Dimensions: 920mm x 580mm x 65mm
Open Dimensions: 1830mm x 580mm x 65mm
Internal Dimensions: 880mm x 508mm x 25mm
Weight: 16.7kg
Maximum Load Capacity: 100kg
Material: 1.8mm Black Powder-Coated Steel
What's Included
1 x Front Runner Fridge Slide
1 x L-Bracket Latch
Bolt Kit
Frequently Asked Questions
What fridge sizes are suitable for this Front Runner Fridge Slide?
This slide is designed to suit many popular portable fridges in the 80L–90L range. Always compare your fridge dimensions with the tray measurements before purchasing.
Can this fridge slide be mounted in a canopy, caravan, or ute tray?
Yes. The slide can be mounted to most suitable flat surfaces, including canopies, caravans, ute trays, drawer systems, and touring vehicle storage setups.
Does the slide lock securely during travel?
Yes. The integrated swivel latch locking system and rattle-free design help keep your fridge and equipment secure while travelling on-road and off-road.
Note: Fridges and storage containers shown are sold separately.
FRONT RUNNER Cargo Slide/Fridge Slide / 80L To 90L -...
$471.20
$589.00
Front Runner Cargo Slide / Fridge Slide 80L–90L
The Front Runner Cargo Slide / Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide quick and convenient access to larger portable fridges, camping equipment, toolboxes, and adventure gear. Ideal for 4WDs, canopies, ute trays, drawer systems, and touring vehicles, the slide maximises accessibility while maintaining a compact footprint.
Built with high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, allowing easy access to equipment without climbing into your vehicle. The rattle-free design keeps your cargo secure during travel, while the clip latch locking system prevents unwanted movement when closed.
Constructed from durable black powder-coated steel and featuring a hold-open mechanism for uneven terrain, the Front Runner Cargo Slide is engineered for demanding off-road, touring, camping, and worksite environments.
Features
Suitable for 80L–90L portable fridges
High-strength bearing drawer slide mechanism
Nearly 100% tray extension for easy access
Rattle-free design during travel
Clip latch locking system
Hold-open mechanism for uneven surfaces
Mounts to most flat surfaces
Compatible with Front Runner Drawer Systems
Pre-drilled mounting holes for simple installation
Includes mounting hardware for wood and metal surfaces
Heavy-duty black powder-coated steel construction
Ideal for fridges, storage boxes, tools, and touring equipment
Specifications
Overall / Closed Dimensions: 942mm x 578mm x 85mm
Open Dimensions: 1858mm x 578mm x 85mm
Internal Dimensions: 884mm x 507mm x 64mm
Weight: 18.2kg
Load Rating: 113kg (250lbs)
Material: Black Powder-Coated Steel
What's Included
1 x Front Runner Cargo Slide
Installation Hardware
Fitting Instructions
Frequently Asked Questions
What fridge sizes will fit this Front Runner Cargo Slide?
This model is designed for many popular portable fridges in the 80L–90L range. We recommend comparing your fridge dimensions with the tray measurements before purchasing.
Can this Cargo Slide be installed in a canopy, ute tray, or drawer system?
Yes. The slide can be mounted to most suitable flat surfaces, including canopies, ute trays, drawer systems, and touring vehicle storage setups.
Does the slide lock securely during travel?
Yes. The integrated clip latch locking system and rattle-free design help keep your fridge and equipment secure while driving on-road and off-road.
Note: Fridges, storage containers, and accessories shown are sold separately.
FRONT RUNNER 4 Cub Box Drawer / Narrow - SSAM008
$950.40
$1,188.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into narrow vehicles such as the Land Rover Defender 90/110 (1983-2016), or vehicles where the wheel arches protrude further than usual.
This 4 Cub Box Drawer / Narrow kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. Fitted with a latching mechanism, the drawer is kept in place when in the closed position. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack The 4 Cub Box Drawer / Narrow can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty. Installation of this product requires a Rivnut tool.
*Please Note: The 4 Cub Box Drawer / Narrow does not come with an upper flat deck, deck completion set or face plates as standard fitment. The wood included in the drawer is for transportation/shipping purposes only. This “universal” drawer is designed to be a fully customized fitment.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer unitProduct Dimensions:906mm (35.7") L x 696mm (27.4") W x 262mm (10.3") HInterior Drawer Dimensions:882mm (34.7") L x 646mm (25.4") W x 45mm (1.8") HWeight:38.44kg (84.7lbs)Special Notes:The drawer has a rotating latch to secure the drawer in place.
FRONT RUNNER 4 Cub Box Drawer / Wide - SSAM009
$899.20
$1,124.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into vehicles with a smaller than usual cargo area.
This 4 Cub Box Drawer / Wide kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
Fitted with a latching mechanism, the drawer is kept in place when in the closed position. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear across the surface. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack. The 4 Cub Box Drawer / Wide can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer FrameNylon Carpet & Laminated Plywood - Top DeckProduct Dimensions:653mm (25.7") L x 940mm (37") W x 261mm (10.3") HInterior Drawer Dimensions:Full Size:629mm (24.8") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Sections (Left & Right Hand Side):629mm (24.8") L x 440mm (17.3") W x 45mm (1.8") HWeight:36.8kg (81.1lbs)Load Rating:113kg (250lbs)Special Notes:The drawer has a rotating latch to secure drawer in place.
FRONT RUNNER 4 Wolf Pack Pro Storage System Kit/ Asymmetric...
$980.00
$1,225.00
This smart, asymmetrical storage solution enables your vehicle to house the four included Wolf Pack Pro boxes. It takes only minutes to install, and then you can slide the Wolf Pack Pro boxes into place. This is a spring-loaded system so the boxes won’t vibrate or move excessively. The clean Bamboo deck can hold a max weight of 80 kg and is the perfect place for your fridge and slide.
This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The top deck is finished with a clean Bamboo wood finish.Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.
Consists of:1 x Storage Unit2 x Top Decks4 x Wolf Pack ProInstallation HardwareFitting Instructions
Materials used:Black powder coated mild steel - FrameBamboo - Top Drawer Base
Product Dimensions:975mm (38.4") L x 975mm (38.4") W x 315mm (12.4") H
Wolf Pack Pro Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H
Weight:50.6kg (111.6lbs)
Special Note:80kg (176.4lbs) top deck load capacity
FRONT RUNNER 6 Cub Box Drawer W/ Cargo Sliding Top...
$1,503.20
$1,879.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This 6 Cub Box Drawer with Cargo Sliding Top kit includes both a sliding drawer, sliding deck, 2 rotating latch mechanisms and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths.
These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear spread across the surface. Fitted with a latching mechanism, both drawer and slide are kept in place when in the closed position.
Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck slide using STRA034 or other straps as well as RAIL007 and RRAC012. The deck is finished with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo, while insulating against noise and vibration.
Finished with the same durable black powder coating as the Front Runner Slimline II Roof Rack The Front Runner 6 Cub Box Drawer with Cargo Sliding Top can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - FrameNylon Carpet & Laminated Plywood - Top Drawer BaseProduct Dimensions:969mm (38.1") L x 940mm (37") W x 350mm (13.8") HInterior Drawer Dimensions:Full Size:944mm (37.2") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Bottom Drawer Sections:944mm (37.2") L x 440mm (17.3") W x 45mm (1.8") HTop Drawer:948mm (37.3") L x 893mm (35.2") W x 71mm (2.8") HWeight:68.04kg (150lbs)Load Rating:113kg (250lbs) Interior Drawers113kg (250lbs) Top DrawerSpecial Notes:The drawer unit has rotating latches to secure both the top and bottom drawers in place.
FRONT RUNNER 6 Cub Pack Drawer / Wide Incl. Boxes...
$2,178.40
$2,723.00
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.This removable box drawer includes 1 drawer slide, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These stackable and durable SBOX001 storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity.
Hold open feature: drawer “locks” open while parked on uneven surfaces. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 RRAC012.
Customize your own storage configurations. Stack and secure luggage, SBOX031s, SBOX001s, aluminum boxes and other storage containers to the top deck using STRA034 or other straps. The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Removable Box Drawer can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use. All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: These ''universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 950mm (37.4") W x 285mm (11.2") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FRONT RUNNER 6 Wolf Pack Pro Drawer / Wide Incl....
$2,575.20
$3,219.00
Neatly organize and easily access all your gear with this innovative drawer-slide system. This kit was specifically designed for the Wolf Pack Pro (the ultimate plastic storage box) and includes six Wolf Pack Pro load bins so you can store and transport all your gear.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction
Materials used:Aluminum - Accessory Channels & Sub FrameBlack powder coated steel - FrameCarpet & Laminated plywood - Top Deck
Product Dimensions:Overall Dimensions:1252mm (49.3") L x 1083mm (42.6") W x 310mm (12.2") H
Drawer Inner Dimensions:1197mm (47.1") L x 1031mm (40.6") W x 230mm (9.1") H
Drawer Unit Open Dimensions:2163mm (85.2") L x 1083mm (42.6") W x 310mm (12.2") H
Weight:67Kg (147.7lbs)
Load Rating:113Kg (250lbs)
Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
