FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack Wind...
$208.80
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford F150 Super Crew (2015-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Works with or without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack 40In...
$208.80
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Lightbar wind fairing for the Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack Wind...
$208.80
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Works with or without a sunroof.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$189.60
$237.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$189.60
$237.00
Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Raptor (2009-Current) Slimline Ii Roof Rack...
$1,599.20
$1,999.00
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation.
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 310mm (12")Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Ford F-150 5.5' Super Crew (2009-Current) Double Load...
$727.20
$909.00
Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)
FRONT RUNNER Ford F-150 5.5' Super Crew (2009-Current) Triple Load...
$987.20
$1,234.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 5.5' Super Crew with these three low-profile, powder coated aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 5.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 16.46kg (36.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 235mm (9")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 13.6kg (30lbs)
FRONT RUNNER Ford F-150 6.5' Super Crew (2009-Current) Double Load...
$724.80
$906.00
Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.27kg (27.05lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)
FRONT RUNNER Ford F-150 6.5' Super Crew (2009-Current) Triple Load...
$984.80
$1,231.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 6.5' Super Crew with these low-profile, corrosion-free aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 6.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 30.36kg (66.93lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1685mm (66")Length: 165mm (6")Height: 230mm (9")Shipping Weight:Weight: 13.2kg (29lbs)
FRONT RUNNER Ford F-150 Crew Cab (2009-Current) Pro Bed System...
$1,130.40
$1,413.00
This tough, lightweight steel and aluminum cargo system secures to the bed of your Ford F-150, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this great cargo system, your Ford F-150 can easily fulfill its gear-carrying duties on any adventure or road trip.
This Pro Bed System is specifically designed to fit the Ford F-150 Crew Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the bed of the Ford F-150 Crew Cab with specific mounting brackets. Drilling is required for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Consisting of:1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large1x PBFF001 - Ford F-150 Crew Cab Pro Bed Rack Mounting System1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 51.04kg (112.52lbs)
Shipping Dimensions:Width: 650mm (26")Length: 1450mm (57")Height: 480mm (19")
Shipping Weight:Weight: 52kg (114lbs)
FRONT RUNNER Ford F-150 Raptor 5.5' (2009-Current) Double Load Bar...
$727.20
$909.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 Raptor 5.5' with these two low-profile, corrosion-free aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1580mm (62")Height: 275mm (11")Shipping Weight:Weight: 12.2kg (27lbs)
FRONT RUNNER Ford F-150 Raptor 5.5' (2009-Current) Triple Load Bar...
$987.20
$1,234.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 Raptor 5.5' with these three low-profile, corrosion-free aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 16.46kg (36.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1685mm (66")Length: 165mm (6")Height: 355mm (14")Shipping Weight:Weight: 16.4kg (36lbs)
FRONT RUNNER Ford F-150 Retrax Xr 5'6In (2004-Current) Double Load...
$509.60
$637.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRFF033 - Ford F-150 ReTrax XR 5'6" (2004-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6.8kg (14.99lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1690mm (67"); Height: 155mm (6")
Shipping Weight:
Weight: 9kg (20lbs)
FRONT RUNNER Ford F-150 Raptor 5.5' (2009-Current) Slimline Ii Load...
$1,842.40
$2,303.00
Haul more with this full-size, tough-as-nails Ford F-150 Raptor 5.5' rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford F-150 Raptor truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1358mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.12kg (75.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 37kg (81lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack 40In...
$1,642.40
$2,053.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Suzuki Grand Vitara (2007-2014) contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSV001T - Suzuki Grand Vitara (2007-2014) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
1 x TRSV001 - Suzuki Vitara Tracks / 1850mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 29kg (63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 33.3kg (73.3lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack Wind...
$1,194.40
$1,493.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Suzuki Jimny. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ002T - Suzuki Jimny (1998-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASJ002 - Suzuki Jimny Foot Rails - by Front Runner
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)
DIRECTION-PLUS Fuel Manager Post-Filter Kit Ford Ranger / Everest Bi-Turbo...
$413.10
$459.00
Direction Plus™ Fuel Manager Post-Filter Kit (PF664DPK) is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022
Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022
Ford Ranger Raptor YN2S (2.0L 4cyl) 2018 – 2022
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Ford Next Gen...
$693.90
$771.00
The TransChill Arctic Black Transmission cooler kit TCB671DPK fits:
Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On
Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On
This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Fuel Manager Pre-Filter Kit Ford Ranger / Everest Bi-Turbo...
$418.50
$465.00
Direction Plus™ Fuel Manager Pre-Filter Kit FM664DPK is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022PROTECT YOUR ENGINEIt’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
HOW IT WORKSInstalling a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even
when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
