JL AUDIO Coaxial Speaker System: 4" (100 Mm) Woofer, 0.75"...
$159.00
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, breakaway mounting tabs on the woofer frame allow the C1-400x to be installed in four-hole or two-hole mounting configurations. C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound.
At the core of the C1-400x is a proprietary, stamped, steel 4-inch (100 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the backplate.
Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminium dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition.
The tweeter’s design has an inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
GENERAL SPECIFICATIONS:
Continuous Power Handling (RMS): 35 W
Peak Music Power: 105 W
Recommended Amplifier Power (RMS): 10 – 50 W / Ch.
System Efficiency: 84.5 dB @ 1 W / 1 m
System Nominal Impedance: 4 Ω
System Frequency Response: 64 Hz – 24 kHz ± 3 dB
Frame Outer Diameter* (A): 4.03 in / 102 mm
Grille Tray Outer Diameter (B): N/A
Motor Outer Diameter (C): 2.33 in / 59 mm
Frontal Coaxial Tweeter Protrusion** (D): 0.61 in / 16 mm
Frontal Grille Protrusion (E): N/A
Mounting Hole Diameter (F): 3.70 in / 94 mm
Mounting Depth (G): 1.81 in / 46 mm
*Does not take into account mounting tabs **Frontal coaxial tweeter protrusion measured from mounting surface
JL AUDIO Coaxial Speaker System: 5.25" (130 Mm) Woofer, 0.75"...
$219.00
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-525x is a proprietary, stamped, steel 5.25-inch (130 mm) frame and a DMA-optimized motor system.
A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the backplate.
Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminium dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition.
The tweeter’s design has an inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit.
A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
GENERAL SPECIFICATIONS:
Continuous Power Handling (RMS): 50 W
Peak Music Power: 225 W
Recommended Amplifier Power (RMS): 10 – 75 W / Ch.
System Efficiency: 89.0 dB @ 1 W / 1 m
System Nominal Impedance: 4 Ω
System Frequency Response: 54 Hz – 24 kHz ± 3 dB
Frame Outer Diameter* (A): 5.83 in / 132 mm
Grille Tray Outer Diameter (B): N/A
Motor Outer Diameter (C): 2.76 in / 70 mm
Frontal Coaxial Tweeter Protrusion** (D): 0.54 in / 14 mm
Frontal Grille Protrusion (E): N/A
Mounting Hole Diameter (F): 4.70 in / 119 mm
Mounting Depth (G): 2.42 in / 62 mm
*Does not take into account mounting tabs **Frontal coaxial tweeter protrusion measured from the mounting surface
JL AUDIO Coaxial Speaker System: 6.5" (165 Mm) Woofer, 0.75"...
$219.00
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings.
Without the ring, the speaker will fit into many “6-inch” speaker locations as well. C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound.
At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil’s motion.
Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminium dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition.
The tweeter’s design has an inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit.
A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
GENERAL SPECIFICATIONS:
Continuous Power Handling (RMS): 50 W
Peak Music Power: 225 W
Recommended Amplifier Power (RMS): 10 – 75 W / Ch.
System Efficiency: 90.5 dB @ 1 W / 1 m
System Nominal Impedance: 4 Ω
System Frequency Response: 48 Hz – 24 kHz ± 3 dB
Frame Outer Diameter* (A): 6.25 in / 159 mm
Grille Tray Outer Diameter (B): N/A
Motor Outer Diameter (C): 3.15 in / 80 mm
Frontal Coaxial Tweeter Protrusion** (D): 0.72 in / 18 mm
Frontal Grille Protrusion (E): N/A
Mounting Hole Diameter (F): 5.02 in / 128 mm
Mounting Depth (G): 2.07 in / 53 mm *Does not take into account mounting tabs **Frontal coaxial tweeter protrusion measured from mounting surface
OPTISOUND 345 Watts 4" 2 Way Component Bmw Oem Fit...
$329.99
The VIBE 8" BMW OEM Fit Underseat Subwoofer is designed for seamless factory integration, improved bass response, and effortless plug-and-play installation, making it the ideal upgrade for BMW audio systems. With vehicle-specific baskets and wiring harnesses, it installs directly into the original under-seat enclosure without modification.
Delivering enhanced low-frequency performance, this subwoofer provides tighter, deeper bass while maintaining clarity and balance across the system. The included high-end crossover with a reference curve setup ensures accurate sound reproduction and improved overall audio quality.
Designed for flexibility, the system can be configured as a passive or semi-active setup, allowing compatibility with a wide range of audio upgrades. Recognised by Car & Hifi Magazine, this subwoofer is perfect for BMW OEM upgrades, stealth installs, and improved in-car bass performance.
Specifications
Product Type: 8" OEM Fit Underseat Subwoofer (BMW)
Peak Power: 345W
RMS Power: 115W (Minimum Input 55W)
Sensitivity: 90dB
Frequency Response: 55Hz – 25kHz
Impedance: 4 Ohm
Fitment: Direct OEM Replacement (Under-Seat Enclosure)
Installation: Plug & Play with Vehicle-Specific Harness
Crossover: High-End with Reference Curve
System Type: Passive or Semi-Active Compatible
Compatibility: BMW 1 Series (F20/21), 3 Series (F30/31/34/35), 4 Series (F32/33), 5 Series (F10/F11), 6 Series (F12/13), X3 (F25)
POWERBOX 360 Watts 6.5" Vw Golf Oem Replacement 2 Way...
$399.99
The VIBE 6.5" 2-Way VW OEM Fit Component Speakers are designed for seamless factory integration, improved sound quality, and easy plug-and-play installation, making them the perfect upgrade for Volkswagen vehicles. Engineered with car-specific fitment, this system delivers enhanced audio performance while retaining the original look and functionality.
Featuring a dedicated 1" tweeter designed to fit directly into the original mirror triangle and a 6.5" woofer with a custom mounting adaptor, these speakers install perfectly into factory locations without modification. The included high-end crossover with a reference curve ensures balanced sound with improved clarity, detail, and soundstage.
With plug-and-play wiring harnesses and connectors, installation is quick and hassle-free. Ideal for VW factory audio upgrades, OEM integration, and improved in-car sound systems, this speaker kit delivers a noticeable upgrade in clarity and overall listening experience.
Specifications
Speaker Type: 6.5" 2-Way Component Car Speaker (VW OEM Fit)
Peak Power: 350W
RMS Power: 120W
Sensitivity: 90dB
Frequency Response: 55Hz – 25kHz
Impedance: 4 Ohm
Tweeter: 1" OEM Fit (Mirror Triangle Mount)
Woofer: 6.5" with Vehicle-Specific Mounting Adaptor
Installation: Plug & Play with OEM Connectors
Crossover: Inline High-End with Reference Curve
Compatibility: VW Golf VI, Golf VII, Scirocco, Polo, Passat
PULSE 4" 2-Way Coaxial Speakers - 120 Watts -PULSE4-V0
$99.99
The VIBE Pulse 4" 2-Way Coaxial Car Speakers are designed for compact performance, clear sound quality, and efficient output, making them ideal for smaller speaker locations and factory upgrades. Built to deliver improved audio without the need for an amplifier, these 4 inch speakers provide a noticeable upgrade in clarity and overall sound.
Featuring a 2-way coaxial design, these speakers deliver balanced midrange and crisp high frequencies for a more detailed listening experience. Despite their compact size, they are engineered for efficient performance, allowing clear and reliable sound from standard head units, perfect for everyday driving.
Designed for easy installation and long-lasting use, the Pulse 4" speakers are a practical and cost-effective solution for upgrading your car speaker system, improving sound quality while maintaining compatibility with factory setups.
Specifications
Speaker Type: 4" 2-Way Coaxial Car Speaker
Peak Power: 120W
RMS Power: 40W
Sensitivity: 83dB
Frequency Response: 100Hz – 20kHz
Impedance: 4 Ohm
Mounting Depth: 44mm (1.7")
Mounting Diameter: 95mm (3.7")
Grille: Included
PULSE 5.25" 2-Way Coaxial Speakers - 150 Watts-PULSE5-V0
$119.99
The VIBE Pulse 5" 2-Way Coaxial Car Speakers are designed for efficient performance, clear sound quality, and easy installation, making them a perfect upgrade for factory car audio systems. Built to deliver strong audio output without requiring an amplifier, these 5 inch speakers provide improved clarity and balanced sound for everyday driving.
Featuring a 2-way coaxial design, these speakers produce smooth midrange and crisp highs for a more detailed listening experience. With high efficiency and sensitivity, they can deliver clear and dynamic sound even on standard head units, making them ideal for entry-level upgrades and simple replacements.
Compact and reliable, the Pulse 5" speakers are designed for easy fitment and long-lasting performance, offering a cost-effective solution to enhance your car speaker system with better sound quality and improved audio clarity.
Specifications
Speaker Type: 5" 2-Way Coaxial Car Speaker
Peak Power: 150W
RMS Power: 50W
Sensitivity: 90dB
Frequency Response: 80Hz – 20kHz
Impedance: 4 Ohm
Mounting Depth: 50mm (2")
Mounting Diameter: 117mm (4.6")
Grille: Included
PULSE 5.25" 2-Way Coaxial Speakers - 150 Watts-PULSE5-V4
$89.99
The VIBE Pulse 5.25" 2-Way Coaxial Car Speakers are designed for efficient performance, clear sound quality, and reliable everyday use, making them an ideal upgrade for factory car audio systems. Engineered to deliver strong audio output without requiring an amplifier, these 5.25 inch speakers provide balanced sound with improved clarity and detail.
Featuring a rigid IMPP woofer cone, these speakers deliver smooth bass response and accurate vocal reproduction. The integrated PEI dome tweeter enhances high-frequency performance, producing crisp and detailed highs for a more complete listening experience. A durable steel mesh grille offers added protection while maintaining a clean, modern look.
With high sensitivity and efficient design, these speakers can produce clear and dynamic sound even on standard head units, making them perfect for factory replacements or entry-level car speaker upgrades. Built for durability and easy installation, they offer a cost-effective solution for improved in-car audio.
Specifications
Speaker Type: 5.25" (130mm) 2-Way Coaxial Car Speaker
Peak Power: 150W
RMS Power: 50W
Sensitivity: 90dB
Frequency Response: 80Hz – 20kHz
Impedance: 4 Ohm
Mounting Diameter: 117mm (4.6")
Mounting Depth: 50mm (2")
Woofer Cone: Rigid IMPP Cone
Tweeter: PEI Dome Tweeter
Grille: Steel Mesh Grille Included
PULSE 5X7" 2-Way Coaxial Speakers - 180 Watts-PULSE57-V0
$129.99
The VIBE Pulse 5" x 7" / 6" x 8" 2-Way Coaxial Car Speakers are designed for efficient performance, clear sound quality, and direct factory replacement, making them an ideal upgrade for vehicles with 5x7 or 6x8 speaker sizes. Perfect for Ford factory speaker upgrades, these speakers deliver improved clarity and output without the need for an amplifier.
Engineered with a 2-way coaxial design, these speakers provide balanced midrange and crisp high frequencies for a more enjoyable listening experience. With high sensitivity, they are capable of producing loud and clear sound even on standard head units, making them perfect for everyday driving and simple audio upgrades.
Designed as a direct replacement, the Pulse 5x7 speakers offer easy installation and reliable performance, making them a cost-effective solution for upgrading your car speaker system while maintaining factory fitment.
Specifications
Speaker Type: 5" x 7" / 6" x 8" 2-Way Coaxial Car Speaker
Peak Power: 180W
RMS Power: 80W
Sensitivity: 90dB
Frequency Response: 60Hz – 20kHz
Impedance: 4 Ohm
Mounting Depth: 53mm (2.1")
Mounting Diameter: 141mm (5.6")
Fitment: Designed as Factory Replacement
PULSE 6.5" 2-Way Speakers 180 Watts-PULSE6-V0
$129.99
The VIBE Pulse 6" 2-Way Coaxial Car Speakers are designed for efficient performance, clear sound quality, and easy upgrade installation, making them an ideal choice for factory replacements and entry-level car audio systems. Engineered to deliver strong audio output without the need for an amplifier, these 6 inch speakers provide a noticeable improvement in clarity and overall sound.
Featuring a 2-way coaxial design, these speakers produce balanced highs and mids for a more detailed and enjoyable listening experience. With high sensitivity, they are capable of delivering loud and dynamic sound even on standard head units, making them perfect for everyday driving and simple audio upgrades.
Built for reliability and ease of installation, the Pulse 6" speakers offer a cost-effective solution for improving your car speaker system, delivering better sound performance while maintaining compatibility with most factory setups.
Specifications
Speaker Type: 6" 2-Way Coaxial Car Speaker
Peak Power: 180W
RMS Power: 80W
Sensitivity: 91dB
Frequency Response: 65Hz – 20kHz
Impedance: 4 Ohm
Mounting Depth: 53mm (2.1")
Mounting Diameter: 141mm (5.6")
Grille: Included
PULSE 6.5" Component Speakers - 240 Watts, 2 Way-PULSE6C-V0
$159.99
The VIBE Pulse 6.5" 2-Way Component Car Speakers are designed to deliver clear sound, strong midrange performance, and improved audio clarity at an affordable price. As part of Vibe’s entry-level range, these component speakers offer a perfect balance of performance and value for upgrading your car audio system.
Featuring a dedicated woofer and separate tweeter setup, this component system provides better sound separation and enhanced detail compared to standard coaxial speakers. The included passive crossover ensures accurate frequency distribution, resulting in cleaner highs, improved vocals, and a more refined listening experience.
With efficient power handling and solid sensitivity, these speakers are ideal for factory head unit upgrades or entry-level car audio builds. Designed for everyday use, they deliver reliable performance, modern styling, and easy installation for a noticeable upgrade in sound quality.
Specifications
Speaker Type: 6.5" 2-Way Component Car Speaker
Peak Power: 240W
RMS Power: 90W
Sensitivity: 90dB
Frequency Response: 75Hz – 10kHz
Impedance: 4 Ohm
Mounting Depth: 68mm (2.7")
Mounting Diameter: 146mm (5.7")
Grille: Included
Crossover: Separate Passive Crossover Included
PULSE 6X9" 3-Way Coaxial Speakers - 300 Watts-PULSE69-V0
$139.99
The VIBE Pulse 6" x 9" 3-Way Coaxial Car Speakers are designed for high efficiency, strong bass response, and clear full-range sound, making them an ideal upgrade for factory systems without requiring an amplifier. Perfect for parcel shelf installations or vehicles with 6x9 speaker positions, these speakers deliver improved audio performance with minimal effort.
Featuring a 3-way coaxial design, these speakers provide a wider frequency range with enhanced highs, mids, and bass for a more balanced and dynamic listening experience. Engineered for efficiency, they produce loud and clear sound even on standard head units, making them a great choice for everyday driving and entry-level car audio upgrades.
Built for reliability and easy installation, the Pulse 6x9 speakers offer a cost-effective solution for upgrading your car speaker system, delivering improved clarity, deeper bass, and overall better sound performance.
Specifications
Speaker Type: 6" x 9" 3-Way Coaxial Car Speaker
Peak Power: 300W
RMS Power: 100W
Sensitivity: 90dB
Frequency Response: 45Hz – 20kHz
Impedance: 4 Ohm
Mounting Depth: 78mm (3.1")
Mounting Diameter: 149mm x 222mm (5.7" x 8.7")
Grille: Included
Design: 3-Way Coaxial for Wide Frequency Response
SLICK 210 Watts 5.25" 2-Way Speakers -SLICK5-V7
$169.99
Upgrade your vehicle’s audio system with the VIBE Slick 6" x 9" 3-Way Tri-Axial Speakers, engineered for high efficiency and powerful sound performance. Featuring a lightweight paper composite woofer cone with foam surround, these speakers deliver improved responsiveness and clarity across all frequencies.
Designed with a perfectly balanced voice coil and single layer spider, the Slick series ensures smooth and accurate sound reproduction. The advanced tweeter design provides extended high-frequency detail and enhanced soundstage, delivering crisp highs and a more immersive listening experience.
With high sensitivity and impressive power handling, these speakers are ideal for both factory upgrades and performance audio builds. Built for durability and everyday use, they offer a reliable solution for drivers looking to achieve clear, dynamic, and well-balanced sound.
Specifications
Speaker Type: 6" x 9" 3-Way Tri-Axial
Peak Power: 480W
RMS Power: 160W
Sensitivity: 90dB
Frequency Response: 50Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 76mm (3")
Mounting Diameter: 145mm x 215mm (5.7" x 8.5")
Grille: Included
SLICK 240 Watts 5.25" Component Speakers -SLICK5C-V7
$229.99
The VIBE SLICK 5.25" 2-Way Component Car Speakers are engineered for high efficiency, clear sound reproduction, and compact fitment, making them ideal for vehicles with smaller speaker locations. Designed to deliver powerful and detailed audio, these speakers offer excellent performance in a compact size.
Featuring a lightweight paper composite cone with a foam surround and a precisely balanced voice coil, these speakers produce tight mid-bass and accurate vocals. The high-performance tweeter delivers crisp highs and extended frequency response, ensuring a well-balanced and immersive listening experience.
Built for efficiency and clarity, the SLICK component system is perfect for car audio upgrades, factory replacements, and space-limited installations, delivering strong performance without requiring excessive power.
Specifications
Speaker Type: 5.25" 2-Way Component Car Speaker
Peak Power: 240W
RMS Power: 80W
Sensitivity: 93dB
Frequency Response: 60Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 46mm (1.8")
Mounting Diameter: 112mm (4.4")
Grille: Included
SLICK 240 Watts 5.25" X 7.5" 2-Way Speakers-SLICK57-V7
$179.99
The VIBE Slick 5" x 7" 2-Way Coaxial Car Speakers are designed for high efficiency, clear sound quality, and powerful output, making them an excellent upgrade for factory and aftermarket car audio systems. Built with a lightweight paper composite woofer cone and foam surround, these speakers deliver fast response, improved clarity, and balanced performance across low and mid frequencies.
Featuring a precision-balanced voice coil and single layer spider, the Slick series ensures smooth and accurate sound reproduction. The integrated high-performance tweeter provides crisp highs and extended frequency range, creating a more detailed and immersive listening experience with improved soundstage.
With efficient design and strong sensitivity, these speakers can produce loud and dynamic sound even on standard head units, making them ideal for everyday driving or upgraded car speaker systems. Durable construction ensures long-lasting performance while maintaining VIBE’s signature sound quality.
Specifications
Speaker Type: 5" x 7" 2-Way Coaxial Car Speaker
Peak Power: 240W
RMS Power: 80W
Sensitivity: 92dB
Frequency Response: 54Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 53mm (2.1")
Mounting Diameter: 126mm x 180mm (5" x 7.1")
Grille: Not Included
SLICK 270 Watts 6.5" Component Speakers-SLICK6C-V7
$249.99
The VIBE SLICK 6.5" 2-Way Component Car Speakers are engineered for high efficiency, detailed sound reproduction, and powerful output, making them one of the most advanced speakers in the SLICK range. Designed for clarity and performance, they deliver an impressive balance of volume, accuracy, and soundstage.
Featuring a lightweight paper composite cone with a foam surround and precision-balanced voice coil, these speakers produce tight mid-bass and smooth, accurate vocals. The high-performance tweeter, built with premium components, delivers crisp highs and extended frequency response for a more immersive listening experience.
Recognised by Car & Hifi Magazine as a “Best Product Mittleklasse”, this component system offers exceptional detail and spatial accuracy, making it ideal for car audio upgrades, sound quality systems, and everyday listening.
Specifications
Speaker Type: 6.5" 2-Way Component Car Speaker
Peak Power: 270W
RMS Power: 90W
Sensitivity: 94dB
Frequency Response: 54Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 61mm (2.4")
Mounting Diameter: 142mm (5.6")
Grille: Included
Award: Best Product Mittleklasse (Car & Hifi Magazine)
SLICK 480 Watts 6X9" 3 Way Speakers -SLICK693-V7
$199.99
Upgrade your vehicle’s audio system with the VIBE Slick 6" x 9" 3-Way Tri-Axial Speakers, engineered for high efficiency and powerful sound performance. Featuring a lightweight paper composite woofer cone with foam surround, these speakers deliver improved responsiveness and clarity across all frequencies.
Designed with a perfectly balanced voice coil and single layer spider, the Slick series ensures smooth and accurate sound reproduction. The advanced tweeter design provides extended high-frequency detail and enhanced soundstage, delivering crisp highs and a more immersive listening experience.
With high sensitivity and impressive power handling, these speakers are ideal for both factory upgrades and performance audio builds. Built for durability and everyday use, they offer a reliable solution for drivers looking to achieve clear, dynamic, and well-balanced sound.
Specifications
Speaker Type: 6" x 9" 3-Way Tri-Axial
Peak Power: 480W
RMS Power: 160W
Sensitivity: 90dB
Frequency Response: 50Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 76mm (3")
Mounting Diameter: 145mm x 215mm (5.7" x 8.5")
Grille: Included
SLICK 8" 450W Pro Audio Midrange Speaker 150W Rms-SLICKPRO8M-V0
$189.99
The VIBE SLICKPRO8M-V0 8 Inch Pro Audio Midrange Speaker is engineered for high-efficiency performance, delivering extremely loud and clear midrange sound for car audio systems. Designed as part of the SLICK Pro range, this 8 inch midrange speaker is built to provide maximum output with minimal power, making it ideal for loud car audio setups and performance builds.
With an impressive 98dB sensitivity, this pro audio speaker can achieve high volume levels even on lower-powered systems, ensuring strong vocal clarity and punchy mid frequencies. The lightweight design enhances responsiveness, while the durable construction ensures reliable performance under demanding conditions.
Perfect for competition audio systems, daily upgrades, or custom installs, the SLICKPRO8M-V0 is designed to deliver aggressive sound output with clarity and precision. Its signature SLICK styling and rubberised gasket provide a secure fit and clean installation, making it a versatile choice for serious car audio enthusiasts.
Specifications
Model: SLICKPRO8M-V0
Speaker Type: Pro Audio Midrange
Configuration: 1-Way
Speaker Size: 8.1" (206mm)
Peak Power: 450W
RMS Power: 150W
Sensitivity: 98dB
Frequency Response: 100Hz – 9kHz
SLICK Speakers - 4", 2-Way, 150 Watts-SLICK4-V7
$149.99
The VIBE Slick 4" 2-Way Coaxial Car Speakers are designed for high efficiency, clear sound quality, and compact performance, making them ideal for smaller speaker locations and factory upgrades. Built with a lightweight paper composite woofer cone and foam surround, these 4 inch speakers deliver fast response and balanced audio across mid and high frequencies.
Featuring a precision-balanced voice coil and single layer spider, the Slick series ensures smooth and accurate sound reproduction. The integrated high-performance tweeter provides crisp highs and extended frequency range, enhancing clarity and delivering a more detailed listening experience.
With efficient design and strong sensitivity, these speakers can produce clear and dynamic sound even on standard head units, making them perfect for upgrading factory systems or completing a car audio speaker setup. Compact, durable, and easy to install, they offer a reliable solution for improved in-car audio.
Specifications
Speaker Type: 4" 2-Way Coaxial Car Speaker
Peak Power: 150W
RMS Power: 50W
Sensitivity: 91dB
Frequency Response: 66Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 43mm (1.6")
Mounting Diameter: 94mm (3.7")
Grille: Not Included
SLICK Speakers - 6.5" 2-Way Speakers -SLICK6-V7
$179.99
The VIBE Slick 6.5 Inch 2-Way Coaxial Car Speakers are engineered for high efficiency, clear sound quality, and powerful output, making them an ideal upgrade for any car audio system. Designed with a lightweight paper composite woofer cone and foam surround, these 6.5" speakers deliver fast response, improved clarity, and balanced sound across all frequencies.
Featuring a precision-balanced voice coil and single layer spider, the Slick series ensures smooth and accurate audio performance. The integrated high-performance tweeter provides crisp highs and extended frequency range, delivering detailed sound and improved soundstage for a more immersive listening experience.
With high sensitivity and efficient design, these speakers can produce loud and dynamic sound even on factory head units, making them perfect for both standard replacements and upgraded car speaker systems. Built for durability and everyday use, they offer a reliable and cost-effective solution for enhanced in-car audio.
Specifications
Speaker Type: 6.5" 2-Way Coaxial Car Speaker
Peak Power: 240W
RMS Power: 80W
Sensitivity: 94dB
Frequency Response: 54Hz – 25kHz
Impedance: 4 Ohm
Mounting Depth: 61mm (2.4")
Mounting Diameter: 142mm (5.6")
Grille: Included
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,160.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,159.92
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$4,719.88
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,479.92
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
