Brands

POLYAIR Red Series Airbag Load Assist Kit for VOLKSWAGEN TOUAREG 3rd Gen 2018-2022 Improve towing performance and ride stability in your VOLKSWAGEN TOUAREG with the POLYAIR Red Series Airbag Kit. Designed for standard height suspension, this load assist system helps reduce rear suspension sag and improve handling under heavy loads. Designed for VOLKSWAGEN TOUAREG 3rd Gen models Standard height suspension compatibility Improves towing and load stability Adjustable rear suspension support Helps reduce suspension squat Part Number: 64796

POLYAIR Red Series Airbag Load Assist Kit for KIA SPORTAGE NQ5 2020-On Designed for the KIA SPORTAGE NQ5, the POLYAIR Red Series Airbag Kit provides additional suspension support for towing, touring and everyday driving. The adjustable airbag system helps improve ride comfort and overall vehicle control under load. Designed for KIA SPORTAGE NQ5 models Suitable for standard height suspension Adjustable air pressure support Improves load carrying stability Helps maintain correct ride height Part Number: 64796

POLYAIR Red Series Airbag Load Assist Kit for KIA SORENTO UM 2016-2020 The POLYAIR Red Series Airbag Kit for the KIA SORENTO UM helps provide additional rear suspension support when towing or carrying extra weight. Adjustable air pressure allows improved vehicle balance and ride control across varying load conditions. Designed for KIA SORENTO UM models Standard height suspension compatibility Adjustable load assist airbag system Improves towing stability Helps reduce rear suspension sag Part Number: 64796

ULTIMATE 2" Raised Suspension Kit – JEEP GLADIATOR 2019+ Part Number: 99051RULT Upgrade your JEEP GLADIATOR with the ULTIMATE 2" Raised Suspension Kit, designed to improve ground clearance, off-road capability, and overall vehicle performance. This suspension kit provides a 2-inch lift, allowing for better approach angles and enhanced handling both on and off the road. Ideal for drivers looking to improve capability without compromising ride comfort. Key Benefits 2" suspension lift for increased ground clearance Improved off-road performance and capability Enhanced vehicle stance and handling Designed for durability in demanding conditions Kit Details Lift Height: 2" Raised Kit Type: Ultimate Engineered for balanced on-road comfort and off-road performance Vehicle Compatibility Make: JEEP Model: GLADIATOR Year: 2019+ Why Upgrade? A suspension lift improves vehicle clearance, allowing for larger tyres and better off-road capability while maintaining control and stability across various driving conditions.

Red Series Airbag Kit – Standard Height | JEEP GRAND CHEROKEE WL (2022+) Improve load support and maintain a level ride. The Red Series Airbag Kit is designed to reduce rear-end sag, enhance stability, and improve handling when towing or carrying loads. Built specifically for the JEEP GRAND CHEROKEE WL (2022+), this standard height system provides adjustable air support while maintaining factory ride height and comfort. Key Benefits Reduces rear-end sag under load or towing Maintains correct ride height for improved handling Adjustable air pressure to suit varying loads Improves stability, safety, and driving control Ideal for everyday driving, touring, and towing Vehicle Fitment JEEP | GRAND CHEROKEE | WL (2022+) Important Compatibility Notes Not compatible with Quadra-Lift suspension Not compatible with SRT-8 models Not suitable for long wheelbase "L" variants Installation Notes Workshop installation recommended Modification to the lower spring seat is required Product Overview The Red Series Airbag Kit provides a practical solution for drivers who regularly tow or carry additional weight. Installed within the suspension, the airbags offer adjustable support to keep your vehicle level and stable. This kit is designed as a standard height system, ensuring compatibility with factory suspension while improving load-carrying performance. Load Support Performance Adjustable air pressure for flexible load support Helps prevent bottoming out under load Improves comfort and control when fully loaded Enhances towing stability Features Vehicle-specific design for precise fitment Standard height configuration (no lift required) Suitable for everyday and light-duty applications Durable construction for long-term reliability Specifications Series: Red Series Part Number: 11899 Height: Standard Height Kit Type: Red Series Airbag Kit Why Choose Red Series Cost-effective solution for load support Designed for vehicle-specific compatibility Improves safety and handling under load Ideal for daily use and light-duty applications FAQs Does this lift the vehicle?No, this kit is designed to support load and maintain factory ride height. Is this compatible with Quadra-Lift suspension?No, this kit is not compatible with Quadra-Lift systems. Do I need professional installation?Yes, workshop installation is recommended due to required modifications. Is this suitable for towing?Yes, it improves stability and reduces sag when towing. Stay Level Under Load Upgrade your suspension with a reliable airbag system designed to improve comfort, control, and safety when carrying weight or towing.

Red Series Airbag Kit – 2" Raised | HOLDEN COLORADO 7 / TRAILBLAZER (2012+) Support your suspension and eliminate sag in lifted setups. The Red Series Airbag Kit is designed to improve load carrying performance, stability, and ride control for vehicles running a 2" lift. Built to suit HOLDEN COLORADO 7 and TRAILBLAZER (2012+), this kit provides adjustable air support for towing, touring, and everyday use. Key Benefits Designed for vehicles with a 2" suspension lift Reduces rear-end sag when towing or carrying loads Improves vehicle stability and handling Adjustable air pressure to suit varying loads Maintains proper ride height under load Vehicle Fitment HOLDEN | COLORADO 7 / TRAILBLAZER | 2012+ Product Overview The Red Series Airbag Kit is a reliable solution for drivers needing additional support when carrying weight or towing. Installed within the suspension, the airbags provide adjustable assistance to help keep your vehicle level and controlled. Specifically designed for 2" raised applications, it ensures correct fitment and dependable performance without compromising ride comfort. Load Support Performance Adjustable air pressure for flexible load support Helps prevent bottoming out under load Improves comfort and control when fully loaded Ideal for towing, work, and touring setups Features Vehicle-specific design for accurate fitment Compatible with lifted (2") suspension systems Suitable for everyday driving and light off-road use Durable construction for long-term reliability Specifications Series: Red Series Part Number: 11992R Application: 2" Raised Suspension Kit Type: Red Series Airbag Kit Why Choose Red Series Cost-effective solution for load support Designed for vehicle-specific compatibility Improves safety and handling under load Ideal for daily use and light-duty applications FAQs Is this suitable for lifted vehicles?Yes, this kit is designed specifically for vehicles with a 2" lift. Will this lift my vehicle further?No, it supports load and maintains ride height but does not increase lift height. Is this suitable for towing?Yes, it helps improve stability and reduce sag when towing. What is the difference between Red Series and Ultimate?Red Series is ideal for general load support, while Ultimate Series offers higher load capacity for heavy-duty applications. Support Your Load with Confidence Improve your vehicle’s stability, handling, and comfort with a reliable airbag system designed for lifted suspension setups.

ULTIMATE 2" Lift Suspension Kit – INEOS GRENADIER 2023+ Part Number: 99053RULT Enhance the capability of your INEOS GRENADIER with the ULTIMATE 2" Lift Suspension Kit, designed to improve ground clearance, off-road performance, and overall vehicle handling. This kit provides a 2-inch lift, allowing for better approach angles and increased clearance for off-road driving while maintaining stability and comfort on-road. Key Benefits 2" lift for increased ground clearance Improved off-road capability and approach angles Enhanced vehicle stance and handling Built for durability in demanding conditions Kit Details Lift Height: 2" Kit Type: Ultimate Engineered for balanced on-road comfort and off-road performance Vehicle Compatibility Make: INEOS Model: GRENADIER Year: 2023+ Why Upgrade? A suspension lift improves ground clearance, allowing for larger tyres and better off-road performance while maintaining control and ride comfort across various driving conditions.

POLYAIR Ultimate Airbag Load Assist Kit for INEOS Grenadier 2023-On – Standard Height Improve load carrying performance, towing stability and ride comfort with the POLYAIR Ultimate Airbag Load Assist Kit for the INEOS Grenadier. Designed specifically for standard height suspension setups, this heavy-duty airbag system provides additional rear suspension support when towing or carrying heavy loads. Whether your Grenadier is set up for touring, towing or off-road adventures, the Polyair Ultimate system helps maintain correct ride height, reduce suspension sag and improve overall vehicle control under varying load conditions. Key Features Designed specifically for INEOS Grenadier models Suitable for standard height suspension vehicles Ultimate Series heavy-duty airbag suspension support Helps reduce rear-end sag and suspension squat Improves towing stability and vehicle handling Adjustable air pressure for varying load requirements Supports factory suspension performance Suitable for towing, touring and off-road applications Durable polyurethane air spring construction Vehicle-specific mounting hardware included Benefits of Polyair Airbag Suspension Polyair airbags are designed to work alongside your vehicle's existing suspension system, providing additional support when carrying loads or towing. By helping maintain a level ride height, the system can improve steering response, braking performance and overall driving stability. The adjustable air pressure design allows you to tailor suspension support to suit changing load conditions, helping improve comfort and control whether travelling on-road or off-road. Vehicle Compatibility INEOS Grenadier Years: 2023-On Suspension Height: Standard Height Series: Ultimate Part Number: 92093ULT SKU: 92093ULT What's Included Polyair Ultimate air springs Vehicle-specific mounting brackets Air line and fittings Installation hardware Fitting instructions Important Information Polyair airbags are designed to assist load carrying and towing stability. They do not increase the vehicle's legal GVM, axle ratings or towing capacity. Always operate your vehicle within the manufacturer's specified limits.

POLYAIR Red Series Airbag Load Assist Kit for HYUNDAI PALISADE 2020-On Enhance towing performance and suspension support in your HYUNDAI PALISADE with the POLYAIR Red Series Airbag Kit. Ideal for family touring and load carrying applications, this adjustable system helps improve ride comfort and maintain vehicle stability. Designed for HYUNDAI PALISADE models Suitable for standard height suspension Helps maintain ride height under load Improves handling and stability Ideal for towing and touring Part Number: 64796

POLYAIR Red Series Airbag Load Assist Kit for HYUNDAI SANTA FE MX5 2023-On The POLYAIR Red Series Airbag Kit for the HYUNDAI SANTA FE MX5 provides additional rear suspension support for towing, touring and everyday driving. Designed for standard height vehicles, it helps maintain correct ride height and improve overall vehicle balance under load. Designed for HYUNDAI SANTA FE MX5 models Standard height suspension compatibility Adjustable air pressure support Helps improve towing stability Reduces rear-end sag under load Part Number: 64796

POLYAIR Red Series Airbag Load Assist Kit for HYUNDAI TUCSON NX4 2020-On Improve ride comfort, towing stability and rear suspension support with the POLYAIR Red Series Airbag Kit for the HYUNDAI TUCSON NX4. Designed for standard height suspension, this adjustable airbag system helps reduce rear-end sag and maintain a level ride height when carrying passengers, luggage or towing. Designed for HYUNDAI TUCSON NX4 models Suitable for standard height suspension Adjustable Red Series airbag system Improves load carrying stability Helps reduce suspension sag Part Number: 64796

POLYAIR Red Series Airbag Load Assist Kit for KIA SORENTO MQ4 2020-On The POLYAIR Red Series Airbag Kit for the KIA SORENTO MQ4 helps maintain ride height and improve suspension support when towing or carrying passengers and cargo. Designed for standard height vehicles, it delivers adjustable load support without compromising comfort. Designed for KIA SORENTO MQ4 models Suitable for standard height suspension Adjustable air pressure system Improves towing stability and comfort Helps reduce rear-end sag Part Number: 64796

POLYAIR Red Series Airbag Kit – HOLDEN JACKAROO TF 1997–2002 Part Number: 75103 The POLYAIR Red Series Load Assist Airbag Kit is designed to suit coil-sprung vehicles, helping maintain ride height, improve handling, and enhance safety when carrying heavy loads or towing. When your vehicle is loaded or towing a caravan or trailer, the rear suspension can sag, affecting stability, braking, and visibility. This airbag kit restores balance and control, ensuring a safer and more comfortable driving experience. Common Issues Without Load Support Suspension bottoming out Rough or unstable ride Excessive sway and body roll Poor headlight alignment Reduced ground clearance Unpredictable braking performance Key Benefits Maintains level ride height under load Improves handling and vehicle stability Reduces suspension stress and wear Enhances towing safety and control Features Air adjustable from 5–35 PSI Tough moulded polyurethane construction Quick-connect air fittings for easy use Simple installation with common tools Includes detailed, illustrated instructions Vehicle Compatibility Make: HOLDEN Model: JACKAROO TF Year: 1997–2002 Lift Height: 2" Warranty 2-year unlimited kilometre warranty Why Choose Polyair? POLYAIR Red Series airbags provide a simple and effective solution for load support, improving safety, comfort, and performance when towing or carrying heavy loads.

POLYAIR Red Series Airbag Load Assist Kit for HOLDEN Jackaroo Rear Coil (1991-2002) Improve load carrying performance, towing stability and ride comfort with the POLYAIR Red Series Airbag Load Assist Kit for the HOLDEN Jackaroo. Designed specifically for rear coil spring vehicles, this adjustable in-coil airbag system helps support your suspension when carrying heavy loads or towing. If your vehicle suffers from rear-end sag, bottoming out or unstable handling under load, the Polyair Red Series provides a practical and reliable solution. The adjustable polyurethane airbags work alongside your existing suspension to improve vehicle balance, maintain ride height and deliver greater control in varying load conditions. Key Features Designed for HOLDEN Jackaroo rear coil spring models Heavy-duty polyurethane in-coil airbag system 30psi maximum pressure rating Reduces rear suspension sag and bottoming out Improves towing stability and load levelling Adjustable air pressure to suit varying loads Helps improve ride comfort and vehicle control Suitable for towing, touring and everyday driving Vehicle-specific design for accurate fitment Complete fitting kit included Benefits of Polyair Airbag Suspension Polyair airbags are designed to support your vehicle's existing suspension system when additional load support is required. By helping maintain a level ride height, they can improve steering response, braking performance and overall vehicle stability. The Red Series airbag system is ideal for vehicles used for towing caravans, trailers and boats or carrying heavy loads. Adjustable air pressure allows the suspension support to be tailored to your specific driving and load requirements. What's Included Two Polyair Red Series air springs Two installation valves Airline tubing All required fittings Vehicle-specific mounting hardware Detailed installation instructions Vehicle Compatibility HOLDEN Jackaroo Rear Coil Spring Models Years: 1991-2002 Brand: Polyair SKU: 11993J Important Information Polyair airbags are designed to assist load carrying and towing stability. They do not increase the vehicle's legal GVM, axle ratings or towing capacity. Always operate your vehicle within the manufacturer's specified limits.

Red Series Airbag Kit – Standard Height | NISSAN PATHFINDER R53 (2021+) Improve load support and maintain a level ride. The Red Series Airbag Kit is designed to reduce rear-end sag, enhance stability, and improve overall handling when carrying loads or towing. Built specifically for the NISSAN PATHFINDER R53 (2021+), this standard height kit provides adjustable air support while maintaining factory ride height and comfort. Key Benefits Reduces rear-end sag when towing or carrying loads Maintains factory ride height under load Improves vehicle stability and handling Adjustable air pressure for different load conditions Ideal for daily driving, towing, and touring Vehicle Fitment NISSAN | PATHFINDER | R53 (2021+) Product Overview The Red Series Airbag Kit is a practical solution for drivers who regularly carry extra weight or tow. Installed within the suspension, the airbags provide additional support to keep your vehicle level and controlled. Designed as a standard height system, it integrates seamlessly with factory suspension while improving ride comfort and load-carrying performance. Load Support Performance Adjustable air pressure to suit varying loads Helps prevent bottoming out under load Improves ride comfort when fully loaded Enhances control and safety during towing Features Vehicle-specific design for precise fitment Standard height configuration (no lift required) Suitable for everyday driving and light-duty use Durable construction for long-term reliability Specifications Series: Red Series Part Number: 11799 Height: Standard Height Kit Type: Red Series Airbag Kit Why Choose Red Series Cost-effective solution for load support Designed for vehicle-specific compatibility Improves safety and handling under load Ideal for everyday and light-duty applications FAQs Does this lift the vehicle?No, this is a standard height kit designed to maintain factory ride height. Is this suitable for towing?Yes, it helps improve stability and reduce sag when towing. Can I adjust the air pressure?Yes, the system allows adjustable air pressure depending on your load. Is it vehicle-specific?Yes, it is designed specifically for the NISSAN PATHFINDER R53 (2021+). Drive with Confidence Under Load Maintain comfort, control, and stability with a reliable airbag system designed for everyday use and load support.

60PSI Ultimate Series Airbag Kit – 2" Raised | FORD F150 RAPTOR (2021+) Heavy-duty load support for lifted setups. The Ultimate Series 60PSI Airbag Kit is engineered to deliver maximum suspension support, improved stability, and enhanced control for vehicles running a 2" lift. Designed specifically for the FORD F150 RAPTOR (2021+), this kit helps maintain correct ride height and handling when towing or carrying heavy loads. Key Benefits Designed for vehicles with a 2" suspension lift Heavy-duty 60PSI air springs for increased load capacity Reduces rear-end sag under towing or heavy loads Improves vehicle stability and handling Adjustable air pressure for different load conditions Vehicle Fitment FORD | F150 RAPTOR | 2021+ (2" Lifted) Product Overview The Ultimate Series Airbag Kit is built for drivers running lifted suspension setups who need reliable load support. Whether towing, touring, or carrying heavy gear, this system helps keep your vehicle level and under control. Specifically engineered for 2" raised applications, it ensures proper fitment and performance without compromising suspension geometry. Heavy-Duty Performance 60 PSI pressure rating for maximum load support Ideal for towing, off-road touring, and heavy-duty use Helps prevent bottoming out under load Improves ride quality and comfort when loaded Features Vehicle-specific design for accurate fitment Compatible with lifted (2") suspension systems Suitable for 4WD applications Durable construction for long-term reliability Specifications Series: Ultimate Series Part Number: 95090RULT Pressure Rating: 60 PSI Application: 2" Raised Suspension Drive Type: 4WD Kit Type: Ultimate Airbag Kit Why Choose Ultimate Series Higher load capacity compared to standard airbag kits Designed specifically for lifted vehicles Improves safety and control under heavy load Reliable performance in demanding conditions FAQs Is this compatible with standard suspension?No, this kit is specifically designed for vehicles with a 2" lift. Will this lift my vehicle further?No, it supports load and maintains ride height but does not increase lift height. Is this suitable for towing?Yes, it is ideal for towing and carrying heavy loads. What makes this different from standard kits?This Ultimate Series kit supports up to 60 PSI and is designed for lifted applications. Built for Lifted Setups Maintain control, stability, and ride height with a heavy-duty airbag system designed specifically for lifted vehicles and demanding conditions.

60PSI Ultimate Series Airbag Kit – Standard Height | FORD F150 RAPTOR (2021+) Maximum load support for serious towing and heavy-duty use. The Ultimate Series 60PSI Airbag Kit is designed to deliver superior suspension support, improved stability, and enhanced control when carrying heavy loads or towing. Built specifically for the FORD F150 RAPTOR (2021+), this heavy-duty system maintains ride height while providing adjustable air support for demanding conditions. Key Benefits Heavy-duty 60PSI air springs for increased load capacity Reduces rear-end sag when towing or carrying heavy loads Improves vehicle stability, handling, and safety Maintains correct ride height under load Adjustable air pressure to suit different driving conditions Vehicle Fitment FORD | F150 RAPTOR | 2021+ Product Overview The Ultimate Series Airbag Kit is engineered for drivers who require maximum performance from their suspension system. Whether towing, touring, or carrying heavy equipment, this kit provides the support needed to maintain control and comfort. Designed as a standard height solution, it integrates seamlessly with factory suspension while enhancing load-carrying capability. Heavy-Duty Performance 60 PSI pressure rating for higher load support Ideal for towing, work vehicles, and off-road touring Helps prevent bottoming out under heavy loads Improves ride quality when fully loaded Features Vehicle-specific design for precise fitment Suitable for 4WD applications Standard height configuration Durable construction for long-term reliability Specifications Series: Ultimate Series Part Number: 95090ULT Pressure Rating: 60 PSI Height: Standard Height Drive Type: 4WD Kit Type: Ultimate Airbag Kit Why Choose Ultimate Series Higher load capacity compared to standard airbag kits Designed for demanding towing and load applications Improves safety and vehicle control under stress Reliable performance in tough conditions FAQs Does this lift the vehicle?No, this is a standard height kit designed to support load and maintain ride height. Is this suitable for towing?Yes, it is designed specifically for heavy-duty towing and load support. What makes this different from standard kits?This Ultimate Series kit supports up to 60 PSI, offering greater load capacity and performance. Is it vehicle-specific?Yes, it is designed for FORD F150 RAPTOR (2021+) for proper fitment. Built for Heavy Loads Upgrade your suspension with a high-performance airbag system designed to handle serious weight, improve stability, and keep your vehicle level under load.

Polyair Red Bag Airbag Kit – 2" Raised | FORD EVEREST (2022+) Eliminate sag and regain control under load. The Polyair Red Bag Airbag Kit is designed to support your suspension when towing, carrying heavy loads, or touring — improving stability, ride height, and overall handling. Built specifically for the FORD EVEREST (2022+) with a 2" raised setup, this kit provides adjustable load support without compromising ride comfort. Key Benefits Reduces rear-end sag when towing or carrying heavy loads Improves vehicle stability and handling Adjustable air pressure to suit different load conditions Maintains correct ride height under load Designed specifically for lifted (2") suspension setups Vehicle Fitment FORD | EVEREST | 2022+ (2" Raised) Product Overview The Polyair Red Bag Airbag Kit is an ideal solution for drivers who regularly tow, carry tools, or travel with added weight. By providing additional support inside your suspension, it helps maintain a level ride and improves control in demanding conditions. This kit is engineered to suit your specific vehicle, ensuring proper fitment and reliable performance. Load Support Performance 30 PSI maximum pressure rating Adjustable air support depending on load Helps reduce suspension strain and bottoming out Improves comfort when fully loaded What’s Included 2 x Air Springs (Red Bags) 2 x Inflation Valves Airline tubing All fittings and mounting hardware Detailed installation instructions Specifications Part Number: 95099R Pressure Rating: Up to 30 PSI Application: 2" Raised Suspension Lead Time: 4–5 Business Days Why Choose Polyair Proven solution for load support and towing stability Vehicle-specific design for correct fitment Improves safety and control under load Ideal for touring, work vehicles, and towing setups FAQs Will this lift my vehicle?No, this kit is designed to support load and maintain ride height, not lift the vehicle. Can I adjust the pressure?Yes, you can adjust the air pressure depending on your load requirements. Is this suitable for towing?Yes, it is ideal for towing and carrying heavy loads. Does it fit standard suspension?No, this kit is designed specifically for vehicles with a 2" raised suspension. Drive Loaded with Confidence Improve your vehicle’s handling, stability, and safety when carrying heavy loads with the Polyair Red Bag Airbag Kit.

Red Series Suspension Kit – Standard Height | FORD EVEREST UB (2022+) Restore performance and maintain factory ride height with confidence. The Red Series Suspension Kit is designed to deliver reliable performance, improved handling, and durability for everyday driving and light off-road use. Built to suit the FORD EVEREST UB (2022+), this standard height kit is ideal for drivers looking to replace or upgrade their suspension without altering vehicle height. Key Benefits Direct replacement suspension solution for factory setup Maintains standard ride height for balanced performance Improves ride comfort and handling stability Designed for everyday driving and light off-road use Durable construction for long-term reliability Vehicle Fitment FORD | EVEREST | UB (2022+) Product Overview The Red Series Suspension Kit is engineered to provide a dependable upgrade or replacement for worn factory suspension components. Designed specifically for the latest Ford Everest platform, it ensures proper fitment, performance, and ease of installation. This kit is suited for drivers who want to maintain original ride height while improving overall driving comfort and control. Features Standard height configuration Vehicle-specific design for precise fitment Suitable for 4WD applications Balanced performance for on-road and light off-road use Specifications Series: Red Series Part Number: 95099 Height: Standard Height Drive Type: 4WD Kit Type: Red Series Suspension Kit Why Choose Red Series Reliable performance for daily driving Designed for vehicle-specific compatibility Maintains factory ride characteristics Ideal replacement for worn suspension systems FAQs Does this lift the vehicle?No, this is a standard height suspension kit designed to maintain factory ride height. Is this suitable for off-road use?Yes, it is suitable for light off-road and touring use. Is this a direct fit?Yes, it is designed specifically for the FORD EVEREST UB (2022+) for direct fitment. Is installation straightforward?Professional installation is recommended, but it is designed for a direct replacement setup. Restore Your Ride Upgrade your suspension with a reliable, vehicle-specific solution designed to maintain comfort, control, and performance.

Enhance your DODGE RAM TRX / RHO (2020+) with the Bellows Ultimate Suspension Kit, designed to deliver superior load support, ride comfort, and stability while maintaining standard factory height. Featuring advanced bellows-style air assistance, this kit is ideal for heavy-duty applications, towing, and load carrying, helping to reduce sag and improve vehicle balance. Built for durability and consistent performance, it ensures a smoother and more controlled driving experience across all conditions. SpecificationsPart Number: 89377ULTSKU: 89377ULTSeries: Bellows UltimateKit Type: Bellows UltimateHeight: Standard HeightDrive Type: 4WDMake: DODGEModel: RAMVariant: TRX / RHOYear: 2020+Application: Standard Height Suspension Upgrade

Upgrade your BYD SHARK 6 (2024+) with the Ultimate Series Raised Height Suspension Kit, designed to deliver improved ground clearance, enhanced off-road capability, and better overall vehicle control. This kit is ideal for drivers who want increased ride height without compromising comfort, providing a smoother and more stable driving experience across both on-road and off-road conditions. Built for durability and performance, it ensures reliable handling even under load or on uneven terrain. SpecificationsPart Number: 12090ULTSKU: 12090ULTSeries: UltimateKit Type: UltimateHeight: RaisedMake: BYDModel: SHARK 6Year: 2024+Application: Raised Height Suspension Upgrade

Upgrade your BYD SHARK 6 (2024+) with the Ultimate Series Suspension Kit, designed to improve ride comfort, handling, and overall driving stability while maintaining standard factory height. This kit is ideal for daily driving and light off-road use, offering a balanced performance upgrade without altering your vehicle’s stance. Built for durability and consistent performance, it provides better control under load and a smoother driving experience across various road conditions. SpecificationsPart Number: 12990ULTSKU: 12990ULTSeries: UltimateKit Type: UltimateHeight: Standard HeightMake: BYDModel: SHARK 6Year: 2024+Application: Standard Height Suspension Upgrade

The Roof Space 2 Version 1 is a German-engineered hybrid rooftop tent that combines a strong aluminium hard shell with the fast-deploying space of a soft-shell design. Compact when closed and spacious when opened, it delivers quick setup, excellent aerodynamics, and a comfortable sleeping area for two — ideal for car-based touring and everyday adventure. Mounting & Compatibility Notice⚠️ Roof Space 2 Version 1 must be mounted on two load-rated cross bars.Platform racks, trays, and multi-bar systems are not supported. Click here for Comparison Ex Demo Models – We have several ex-demo model RS2 version 1 tents at our Erina Showroom. Get in touch for more details World's First Fusion Category Rooftop Tent: The ease-of-use and durability of a hard shell tent combined with the small mounting footprint and spaciousness of a soft shell tent. German Design & Engineering: 2024 German Design Award & 2025 German Innovation Award. Panorama mode: Enjoy breathtaking views from your own private rooftop terrace. Fully Dust & Waterproof: The first fully dust-proof rooftop tent built for Australian conditions with patented design. Redundant Stability System: Designed with a steel cable structure and reinforced case, the tent stays secure even if one support fails, giving you added safety and peace of mind. Easy to use: Set up in less than 60 seconds with a single flip. Fits nearly any vehicle: Only 67kg. Sleeps 2: Slightly narrower than a Queen-sized bed, Roof Space 2 comfortably sleeps 2 adults and 1 child or dog. Interior Dimension Open: 250cm length, 150cm width, up to 130cm height. Exterior Dimensions Closed: 156cm length, 135cm width, 24cm height. Mattress: 204cm x 135cm, with 5cm TPU foam + 1cm anti-condensation mat. Storage space: 1 foot at the foot of the bed for bags, shoes, etc. Weight: Case including tent and mattress weighs 67 kg. What's Included 1x Roof Space 2 Rooftop Tent 1x High-Quality Foam Mattress 1x Anti-Condensation Mat 1x Telescopic Ladder (102″) 4x Spring Steel Rods 4x Roof Rack Brackets 1x Gear Bag Compatibility Roof Space 2 fits almost any car. Ensure your vehicle has a dynamic roof load capacity of at least 66.6 kg. You can check your vehicle manual. Get the appropriate roof racks from your trusted auto accessories dealer. Roof Space Warranty Roof Space rooftop tents are backed by a 2-year warranty. We stand behind the quality of our German-engineered designs, giving you peace of mind for every adventure. Sustainable Materials All Roof Space rooftop tents are made from 90% recyclable materials, reducing waste and keeping products eco-friendly without compromising strength or performance.

The world’s most advanced German-engineered hybrid rooftop tent.Designed for faster setup, more space, and real-world touring. The Roof Space 2 (RS2) is a first-of-its-kind RTT design that combines hard-shell durability with the expandable space of a soft-shell, all within one sleek, modern and aerodynamic aluminium design. It maintains a compact footprint when closed and opens into a spacious interior when deployed. Featuring a queen-size premium mattress, Double Panorama Mode, redundant wire stability system, and a quick-release ladder, it’s built with marine-grade fabrics and is fully waterproof and dustproof. Optional awning, insulation and touring accessories are available for year-round Australian adventures. Click here for Comparison German Design & Engineering: This innovative design offers the robust protection of a hardtop while ensuring easy setup typical of soft top tents. World’s First Fusion Category Rooftop Tent: The ease-of-use and durability of a hard shell tent combined with the small mounting footprint and spaciousness of a soft shell tent. Panorama mode: Enjoy breathtaking views from your own private rooftop terrace. Fully Dust & Waterproof: The first fully dust-proof roofttop tent built for Australian conditions with patented design. Redundant Stability System: Designed with a steel cable structure and reinforced case, the tent stays secure even if one support fails, giving you added safety and peace of mind.. Easy to use: Set up in less than 60 seconds with a single flip Fits nearly any vehicle: Only 66.6kg Sleeps 2: Slightly narrower than a Queen-sized bed, Roof Space 2 comfortably sleeps 2 adults and 1 child or dog. Quick Release Ladder: Our patented ladder system installs in seconds for a fast, hassle-free camping setup. LED Light: LED light provided (battery not included). Panoramic Mossie Net: Stay protected with a mosquito net designed for the panoramic setup. Easily zips on using our double zipper system when needed. Fabric: 100% polyester ripstop 280/m2. Highly breathable to reduce condensation, 3000mm water column, PU taped seams, pigment coating for blackout, 50+ UV resistance. Interior Dimension Open: 250cm in length, 150cm in width, and up to 130cm in height. Exterior Dimensions Closed: 156cm in length, 135cm in width, and 24cm in height. Mattress: The sleeping area is 204cm x 135cm. As standard, it includes a 5 cm layer of TPU foam paired with a 1 cm anti-condensation mat for optimal comfort and protection. Storage space: There is 1 foot of space at the foot of the bed to store bags, shoes, and more. Weight: Case including tent and mattress weighs 66.6kg.   What's Included 1x Roof Space 2 Rooftop Tent 1x High-Quality Foam Mattress 1x Roof Space 2 Rooftop Tent 1x Anti-Condensation Mat 1x Telescopic Ladder (102″) 4x Spring Steel Rods 4x Roof Rack Brackets 1x Gear Bag   Compatibility Roof Space 2 fits almost any car. Just make sure your vehicle has a dynamic roof load capacity of at least 66.6 kg. You can find this information in your vehicle’s manual. You can get the appropriate roof racks for your car from your trusted auto accessories dealer. If you have any questions, feel free to contact us.   Roof Space Warranty Roof Space rooftop tents are backed by a 2-year warranty. We stand behind the quality of our German-engineered designs, giving you peace of mind for every adventure.    Sustainable Materials All Roof Space rooftop tents are manufactured using 90% recyclable materials. This eco-friendly approach helps reduce waste and ensures our products are better for the environment without compromising strength or performance.

Take your car’s bass to the next level with the Sony XM-GS100 mono subwoofer amplifier. Delivering 600 watts RMS at 2 ohms (or 330 watts RMS at 4 ohms), this Class-D amplifier offers powerful, clean, and efficient sound for deep, punchy low frequencies. It features variable low-pass (50–300 Hz) and subsonic (6–70 Hz) filters, plus a 0–10 dB bass boost at 40 Hz, allowing precise control of your subwoofer output. Built-in Dynamic Distortion Suppressor and Active Thermal Control protect your amplifier from overheating, short circuits, and DC offset, ensuring reliable performance. With preamp and speaker-level inputs, as well as preamp outputs for daisy-chaining additional amps, the XM-GS100 is versatile and easy to integrate into any car audio setup. Compact, efficient, and CEA-2006 compliant, this amp is the perfect foundation for high-powered, high-quality bass. Category Specification / Feature Type Mono Subwoofer Amplifier Condition New Amplifier Class D RMS Power Output 330W x 1 at 4Ω / 600W x 1 at 2Ω Peak Power Output 1100W x 1 Frequency Response 10–300 Hz Low-Pass Filter Variable 50–300 Hz, 12 dB/octave Subsonic Filter Variable 6–70 Hz, 12 dB/octave Bass Boost 0–10 dB at 40 Hz Protection Circuits Thermal, Short Circuit, DC Offset Preamp Inputs Yes, RCA Speaker-Level Inputs Yes, 4-pin harness included Preamp Outputs RCA x 2 Fuse Rating 30A x 2 Recommended Wiring 4-gauge power/ground (not included) Dimensions (W x H x D) 10.75" x 2.125" x 8" CEA-2006 Compliance Yes Brand Sony Warranty 3 Years Parts & Labor

Experience high-resolution audio in your vehicle with the Sony XMGS4 4-channel car amplifier. Designed for uncompromised sound, this amplifier delivers 70 watts RMS per channel at 4 ohms (or 80 watts RMS at 2 ohms) with clean, detailed audio across a wide frequency range of 10–100,000 Hz. Its bridged mode allows up to 160 watts RMS x 2 at 4 ohms, while maintaining 4-ohm stability. Advanced audio controls, including variable high-pass, low-pass, and subsonic filters, along with independent bass boost for front and rear channels, let you fine-tune your sound to perfection. Built-in protection, a cooling fan, and CEA-2006 compliant power ratings ensure reliability and safe operation. Ideal for car audio enthusiasts seeking dynamic, high-fidelity sound, the XMGS4 is your gateway to a premium listening experience on the road. Category Specification / Feature Type 4-Channel Car Amplifier Condition New Power Output 70W RMS x 4 at 4Ω, 80W RMS x 4 at 2Ω, 160W RMS x 2 at 4Ω (Bridged Mode) Bridged Mode Stability 4Ω stable CEA-2006 Compliance Yes Frequency Response 10 Hz – 100 kHz Filters Variable High-Pass (50–300 Hz, 12 dB/oct) Front/RearVariable Low-Pass (50–300 Hz, 12 dB/oct) Front/RearVariable Subsonic (6–70 Hz, 12 dB/oct) Front/Rear Bass Boost Separate Front/Rear, 0–10 dB at 40 Hz Inputs Preamp and Speaker-Level Inputs Cooling Built-in fan Fuse Rating 30A x 2 Wiring Recommendation 8-gauge power and ground leads (not included) Brand Sony

Upgrade your car audio with the Sony XS-FB1621C 6.3" 2-way component speakers. Designed to replace muffled OEM coaxial speakers, these component speakers deliver crisp, clear vocals at ear level through the PEI balanced dome tweeters while the 2nd generation HOP ACFM woofer provides deep, punchy bass. With 270W peak power and 45W RMS power, these speakers handle high volumes without distortion. The rubber-coated surround ensures clean, distortion-free sound, and the design is optimized for Sony EXTRA BASS™ circuitry for a powerful, immersive listening experience. SPECIFICATIONS: 2nd gen HOP ACFM woofer optimised for Sony EXTRA BASS™ circuitry PEI Balanced Dome Tweeter 270W peak / 45W RMS power handling Rubber coated surround for minimised distortion

The XS-GTF6939 delivers deep, punchy bass with its mica matrix cone woofer, ensuring an immersive audio experience for any driving playlist.With a peak power of 420W and RMS power of 60W, these speakers can handle high volumes without sacrificing sound quality.The full-range 3-way configuration and compatibility with Sony's EXTRA BASS circuitry make installation easy and enhance overall performance in various vehicles.

Upgrade your car audio with the Sony XS-GTF1639 6.5-inch 3-way coaxial speakers, designed to deliver full, dynamic sound with clarity and depth. Featuring a multi-layer HOP Aramid Carbon Fiber Matrix cone woofer, these speakers provide punchy bass and robust midrange, while the BD tweeter and piezo super tweeter deliver crisp, detailed highs. With a peak power of 270W and RMS of 45W (CTA 2031), the XS-GTF1639 handles high volumes effortlessly without distortion. Built as an OE-replacement door speaker, it’s easy to install and comes with a grill, offering a complete and immersive listening experience for any car. Category Specification / Feature General 6.5" 3-way coaxial speaker, OE-replacement door speaker, grill supplied Power Handling Max Power: 270W, RMS Power (CTA 2031): 45W, Extra Bass: Yes Woofer Type: Cone, Material: HOP Aramid Carbon Fiber, Magnet: Ferrite, Edge: Rubber Coated Cloth Tweeter Type: BD, Material: PEI Super Tweeter Type: Piezo, Material: TBD Dimensions & Weight Mounting Depth: 42mm, Dimensions: 158mm x 158mm x 50.4mm, Weight: 740g Brand Sony Speaker Type Coaxial

Enhance your in-car audio with the Sony XS-GTF1039 4-inch 3-way coaxial speakers. Designed for high-performance sound, these speakers feature a HOP (Highly Oriented Polyolefin) aramid carbon fiber matrix cone woofer for deep, punchy bass and clear midrange. The integrated BD tweeter and piezo super tweeter deliver crisp highs, making every song sound dynamic and detailed. With 210W max power and 30W RMS (CTA 2031), the XS-GTF1039 can handle high-volume listening without distortion, while the compact design allows for easy OEM replacement in your vehicle doors. Perfect for music lovers who want strong bass and balanced sound in a reliable package. Category Specification / Feature General 4" 3-way coaxial speaker system, OEM replacement door speaker without baffle board, no grill supplied Power Handling Max Power: 210W, RMS Power (CTA 2031): 30W, Extra Bass: Yes Woofer Type: Cone, Material: HOP aramid carbon fiber matrix / Mica Matrix, Magnet: Ferrite, Edge: Rubber coated cloth Tweeter Type: BD, Material: PEI Super Tweeter Type: Piezo, Material: Tbd

Upgrade your in-car audio with the Sony XS-AW8 compact powered under-seat subwoofer. Designed to fit discreetly under your seat, this 8" subwoofer delivers deep, controlled bass without taking up valuable cabin space. Featuring a Class A/B 75-watt amplifier, sealed cast-aluminum enclosure, and versatile line- and speaker-level inputs, the XS-AW8 provides clear and powerful low-end performance for any music genre. With a wired remote for easy level adjustments, flexible mounting brackets, and simple plug-and-play installation, it’s perfect for enhancing your car audio experience with minimal effort. Backed by a 1-year warranty, this subwoofer combines convenience, quality, and reliability in a compact package.   Category Specification / Feature General Compact powered under-seat subwoofer, 8" shallow-profile woofer, sealed cast-aluminum enclosure, wired remote included, speaker- and preamp-level inputs, steel grille, connector type: RCA/Harness, Parts & Labor Warranty: 1 Year, Returns: 60 Days Amplifier Class A/B, RMS Power: 75 watts, Maximum Wattage: 160 watts Audio Crossover: Low pass 50–150 Hz, Phase: Normal/Reverse switch, Impedance: N/A, Sensitivity: N/A Dimensions Length: 13-5/8", Width: 9-7/8", Height: 3-1/8" (mounting brackets add 1⅜" width / 1⅝" depth) Inputs Line level RCA, speaker-level input, wired remote control with 13' cord, power wire: 13' (14-gauge), ground wire: 13' (14-gauge), remote turn-on: 10', speaker input: 10' Mounting Four corner mounting brackets, remote bracket with adhesive pad, screws included (M5x8mm, 3/4", 1/2", 3/16") Package Contents Powered subwoofer, wired remote control, wiring harness, mounting brackets, remote mounting bracket with pad, screws (various), printed wiring instructions, warranty information

Take your car audio system to the next level with the Sony XS-W124GS 12" component subwoofer. Engineered for deep, powerful bass, this subwoofer delivers clear low-frequency performance that brings your music to life. Built with a durable paper cone, polypropylene dust cap, rubber surround, and steel basket, it’s designed for long-lasting performance even under heavy use. Whether installed in a sealed or ported enclosure, the XS-W124GS provides precision bass, excellent sensitivity, and reliable power handling for audiophiles and enthusiasts alike. Backed by a 3-year warranty, it’s the perfect addition to elevate your in-car listening experience. Category Specification / Feature General 12" 4-ohm component subwoofer, paper cone w/ polypropylene dust cap, rubber surround, steel basket, grille not included, free-air: No, dual voice coil: No, Parts & Labor Warranty: 3 Years, Returns: 60 Days Power Handling Max RMS: 420W, Peak Power: 1800W Frequency & Sensitivity Frequency Response: 30–500 Hz, Sensitivity: 83 dB @ 1W Dimensions Top Mount Depth: 5.625", Bottom Mount Depth: 5.9375", Cutout Diameter: 10.813", Frame Width/Length: 12.694" Enclosure Compatibility Sealed Box: 0.72–1.2 cu ft (ideal 0.91 cu ft), Ported Box: 0.92–1.6 cu ft (ideal 1.16 cu ft, port 3.625" diameter x 13.875" length) Thiele/Small Parameters Vas: 49.1949 L, Fs: 31.9 Hz, Qts: 0.674, Xmax: 7.8 mm Included in Package One 12" single voice coil woofer, plastic trim ring, adhesive-backed foam gasket, eight 1-3/8" screws, instructions (EN/FR/ES), warranty info

Experience premium car audio with the Sony XS-690GS 6"x9" 2-way speakers. Designed to deliver clear highs and deep, rich lows, these speakers bring your music to life on every drive. Built with durable materials for long-lasting performance, they’re the perfect upgrade for any vehicle. Enjoy crisp, powerful sound and reliability you can count on, backed by Sony’s trusted warranty. Category Specification / Feature General Speaker Size: 6"x9" Driver Design: 2-way Woofer Design: Cone Woofer Material: Composite Polypropylene Woofer Surround: Rubber Tweeter Design: Dome Tweeter Material: Silk Impedance (Ohms): 4 Weather-resistant: No Grilles Included: No Parts Warranty: 3 Years Labor Warranty: 3 Years Specifications Sensitivity (1W at 1 meter): 90 dB Frequency Response: 40 - 24,000 Hz Maximum RMS Wattage: 60 W Peak Power Handling: 420 W Top-mount Depth: 2 7/8" Mounting Height: 0.478" Frame Width: 6.62" Frame Length: 9.32" Notes Power spec: Rated 50 W (IEC 60268-5), CTA 2031 compliant RMS power: 60 W Package Contents Two 2-way speakers, Eight 1-1/8" screws, Instructions (English/French/Spanish), Warranty information, Template on box Product Info MFR #: XS690GS, Item #: 158XS690GS

Sony XS-162GS GS Series Component SpeakersPremium 6-1/2" component system with separate woofers and silk dome tweeters for clear highs, detailed mids, and strong bass. General Speaker Type Component Speaker System Speaker Size 6-1/2" Driver Design 2-Way Woofer Material Composite Polypropylene Cone Woofer Surround Rubber Tweeter Type 20mm Dome Tweeter Material Silk Inline Crossovers Included Impedance 4 Ohms Weather Resistant No Grilles Included No Power Handling RMS Power Handling 45 Watts (CTA 2031) Peak Power Handling 250 Watts Performance Frequency Response 45 Hz – 24,000 Hz Sensitivity (1W/1m) 89 dB Mounting Dimensions Top-Mount Depth 1-7/8" Cutout Diameter 5" Mounting Height 0.375" Frame Width 6.225" Frame Length 6.225" Tweeter Mounting Options Flush-Mount Height / Depth / Diameter / Cutout 0.32" / 0.56" / 1.91" / 1.74" Surface-Mount Height / Depth / Frame Diameter 0.74" / N/A / 1.57" Angled Surface-Mount Height / Frame Diameter 1.25" / 1.86" x 1.57" Included Components Woofers 2 Tweeters 2 Speaker Wires with In-Line Crossovers 2 x 46" Flush-Mount Tweeter Housings 2 Angled Surface-Mount Tweeter Wedges 2 Adhesive Backed Surface Mount Pads 2 Screws Eight 1-1/8" screws, Two M3x4mm flat head machine screws Installation Instructions Included Warranty Information Included Woofer Template Included on box Warranty Parts Warranty 3 Years Labour Warranty 3 Years Returns 60 Days Notes Mounting Note Woofers fit most 6-3/4" applications; cutout allows 6-1/2" opening but screw hole pattern requires new holes. Crossover Network High-pass crossovers integrated in included tweeter wires; crossover point 5 kHz; in-line crossover size approx 5/8" x 3/4" x 2". Specification Note Sony rated 40 watts RMS per IEC 60268-5; CTA 2031 RMS rating used (45 watts).

Sony XS-160GS GS Series SpeakersHigh-performance 6-1/2" 2-way car speakers featuring a composite polypropylene woofer and silk dome tweeter for clear highs, strong midbass, and smooth overall sound. General Speaker Size 6-1/2" Speaker Design 2-Way Woofer Material Composite Polypropylene Cone Woofer Surround Rubber Tweeter Type Dome Tweeter Material Silk Impedance 4 Ohms Weather Resistant No Grilles Included No Power Handling RMS Power Handling 45 Watts (CTA 2031) Peak Power Handling 250 Watts Performance Frequency Response 45 Hz – 24,000 Hz Sensitivity (1W/1m) 89 dB Mounting Dimensions Top-Mount Depth 1-7/8" Cutout Diameter 5" Mounting Height 0.625" Frame Width 6.228" Frame Length 6.228" Warranty & Returns Parts Warranty 3 Years Labour Warranty 3 Years Returns 60 Days Features Mounting The speakers can be easily mounted in a variety of 6¾" applications. Given the required cutout, they will also fit into the opening for a typical 6½" speaker (approx. 5" diameter), but the screw hole pattern is larger than a standard 6½", so new holes are likely needed. Specification Note Sony's rated power spec is 40 watts (IEC 60268-5). CTA 2031 RMS rating is 45 watts, used as the standard here. In the Box Included Items Two 2-way speakers, Eight 1-1/8" screws, Instructions, Warranty information, Template on box

Sony XAV-AX8500  Premium 10.1″ floating capacitive touchscreen multimedia receiver with Apple CarPlay, Android Auto, HDMI input, advanced vehicle integration, and a flexible single-DIN source unit. Sony XAV-AX8500 – Key Specifications Color Black Screen Size 10.1″ Touchscreen Capacitive LCD, 1280×720 HD, anti-glare, optically bonded Chassis Size Single DIN Channels 5 Max Power Output 55W x 4 (220W total) Backlight LCD CD/DVD Player No Built-in GPS No Memory Card Slot No HD Radio No EQ Presets 18 FM / 12 AM Apple CarPlay Yes (wired/wireless via 5GHz WiFi) Android Auto Yes (wired/wireless, Android 10+ with WiFi for wireless) Bluetooth 5.0 Yes – hands-free calling & music streaming Profiles HFP 1.7.1, PBAP 1.1, A2DP 1.3.1, AVRCP 1.6.1 USB Input USB-C (rear, 3A charging, supports MSC playback) AUX Input Yes A/V Input Yes HDMI Input Micro-HDMI rear input (video/audio playback, no control) Steering Wheel Control Compatible Yes (adapter sold separately) Wireless Audio Apps Spotify, Apple Music, Pandora, Tidal, YouTube Music, etc. Back-Up Camera Input Yes Second Camera Input Yes Auto-Switching Yes (reverse gear triggers rear camera) Parking Guidelines Customizable color-coded lines iDatalink Maestro Compatible Yes (for OEM integration & vehicle data display) Monitor Size 10.565″ W x 6.575″ H x 1.4375″ D Installation Adjustments Tilt (5–35°), Depth ±0.375″, Height ±1.1875″, Lateral ±1″ Post-install Tilt/Swivel ±15° Display Settings Apps area: 5 icons | Wallpapers: 4 presets + 2 custom JPEGs | Brightness: Dimmer Auto/On, levels 1–4, can turn backlight off Control Buttons Power, Home, Volume, Previous/Next, Voice Recognition | Optional RM-X400 IR remote Amplifier Dynamic Reality Amp 2 – 20W RMS x4, 55W peak x4 Preouts 5V / 6-ch (front, rear, subwoofer) Subwoofer Control Mono/stereo, volume -10 to +10, phase normal/reverse Crossovers Low-pass & high-pass filters, slopes -12/-24/-36/-48 dB EQ 14-band graphic EQ + presets (R&B, Rock, Pop, Dance, Hip-Hop, EDM, Jazz, Soul, Country, Custom 1/2) Time Alignment 4 presets + manual custom adjustment (0.1 in / 1 cm increments) AM/FM Digital clarity tuner, RDS, 5 memory bands, BTM SiriusXM Ready Compatible with 220SXV300 tuner (sold separately) Package Contents Single-DIN source unit (10A fuse)10.1″ touchscreen monitorWiring harness w/ parking brake wireCamera/preout harnessSWC adapter (3-wire to 3.5mm)USB-C extension cable (59″)GPS antenna + mounting plateMicrophone w/ visor bracket (12′ cable)Surface bracket, screws (various sizes), 2 plastic covers, 2 wire-tiesOperating instructions & warranty Key Notes Quick Start-Up: <8 sec to safety caution displayVideo Lockout: Parking brake connection required for videoUSB-C Port: No MTP/AOA 2.0; supports MSC playback onlyOptional Integration: iDatalink Maestro RR/RR2 for OEM display & functions

The Sony XAV-AX4000 is a 6.95″ double-DIN multimedia receiver featuring wireless Apple CarPlay and Android Auto, LDAC high-quality Bluetooth streaming, and advanced sound tuning with a 14-band EQ and time alignment. Sony XAV-AX4000 – Specifications Receiver Type Digital multimedia (no CD) Screen Size 6.95" Screen Type Anti-glare Resistive Touchscreen, 800x480 (1,152,000 pixels) Mounting Type Double-DIN RMS Power (CTA-2006) 20 watts x 4 Peak Power 55 watts x 4 Preamp Voltage 2V EQ Bands 14-band with Time Alignment (Custom 1/2 + Presets: R&B, Rock, Pop, Dance, Hip-Hop, Electronica, Jazz, Soul, Country) Bluetooth Built-in Version 5.0 with LDAC, HFP 1.7.1, PBAP 1.2, A2DP 1.3.1, AVRCP 1.6.1, hands-free calling & wireless music streaming Key Button Color White Apple CarPlay Wired & Wireless (iPhone 5S+, iOS 9+, Siri enabled, Navigation, Messaging, Music, Audio Apps, HomeKit compatible) Android Auto Wired & Wireless (Android 10+, Google Assistant, Maps/Waze navigation, Music & messaging via voice commands) Siri Control Yes Google Assistant Yes iPhone Compatibility iPhone 5S and newer Android Control Yes Preamp Outputs 5-channel (Front/Rear/Mono Subwoofer) Subwoofer Output Yes, adjustable phase & volume SiriusXM Ready Yes, compatible with 220SXV300 tuner (sold separately) iDataLink Maestro Compatible Yes (retains factory features & vehicle data display, web programmable, climate & gauges display) Steering Wheel Control Adapter required (sold separately) USB Input Rear (USB-C, 3A charging, MSC playback only) AUX Input No Rear Camera Input Yes, auto-switching with customizable parking guide lines Supported Formats MP3, WMA, AAC, ALAC, FLAC, WAV, DSD (converted internally to 24-bit/192kHz) High-Resolution Audio ALAC, FLAC, WAV, DSD Radio AM/FM with RDS & BTM, FM Sensitivity 7 dBf Parking Brake Connection Required for video/settings access CTA-2006 Compliant Yes Wireless Remote Optional (RM-X400 sold separately) Parts Warranty 1 Year Labour Warranty 1 Year Returns 60 Days Chassis Depth 5.145" Chassis Width 7.035" Chassis Height 3.955" Package Contents Digital multimedia receiverWiring harness w/ parking brake wireCamera/preout harness3-wire to 3.5mm SWC adapter59" USB-C extension cableGPS antenna + mounting plateMicrophone w/ visor bracketSurface bracket + two-sided tapeFour M5x9mm ISO screws + wire-tieOperating instructions & warranty

The Sony XAV-AX8100 is a premium 9″ single-DIN floating multimedia receiver featuring a large anti-glare touchscreen, Apple CarPlay, Android Auto, HDMI input, and powerful 5-volt preouts for high-performance system builds. Feature Specification / Details Touchscreen 8.95" Anti-Glare Resistive LCD, 800x480 pixels (1,152,000 pixels), responsive touch, single-DIN floating mount. Mounting Adjustments Tilt +/-10°, Depth 1.5625"-2.375", Height 2.375". Must adjust before final installation. Picture Adjustments Dynamic, Standard, Theater, Custom modes; dimmer (-5 to +5); 5 wallpapers; aspect ratios 4:3, Zoom, 16:9, Captions. Safety Note Video playback requires parking brake; CarPlay, Android Auto, and Bluetooth audio still available while driving. Front-Panel Buttons Volume, source, sound settings, voice control. Remote Control IR wireless remote (RM-X170); compatible with steering wheel control adapters (sold separately). Apple CarPlay iPhone 5+ (iOS 7.1+), rear-panel USB connection, Siri voice control, Apple Maps, Google Maps, Waze. Android Auto Android 8.0+ (Oreo), USB & Bluetooth pairing, Google Assistant, Google Maps & Waze, voice messaging/calls. WebLink iOS 13+ / Android 7.0+, apps like YouTube, Yelp, Zomato; requires parking brake for video playback. USB Extension 52" & 23" USB cables included for device connection. Smartphone Charging Rear USB port provides 1.5A charging (ACC or On). Bluetooth Built-in 3.0, HFP 1.6, PBAP 1.1, A2DP 1.3, AVRCP 1.3, Secure Simple Pairing. Hands-Free Calls External mic w/ adjustable gain, answer/reject/redial, store 1,000 contacts, call history. Wireless Audio Streaming Supports SBC & AAC, displays song/artist info (AVRCP 1.4 phones only). USB MSC Playback MP3, WMA, AAC, FLAC, WAV; video playback while parked; max 256 folders / 2,000 files. HDMI Input Mirror Apple/Android devices or external A/V source; video requires parking brake. Rearview Camera Input Composite input, parking guide lines, auto-switch in reverse, manual select via touchscreen. Amplifier Dynamic Reality Amp 2 – 20W RMS x4, 55W Peak x4, 47% less internal resistance. 5ch/5V Preouts + Subwoofer Independent sub volume & phase, low/high-pass filters with selectable cutoffs. 10-Band EQ Presets: R&B, Rock, Pop, Dance, Hip-Hop, Electronica, Jazz, Soul, Country, Custom. Dynamic Stage Organizer (DSO) Improves stereo positioning for speakers in doors/dashboard. ExtraBass Boost low-end with minimal distortion. Beep Tone Optional audible feedback. AM/FM w/ RDS Digital Clarity Tuner, 5 memory bands, 6 presets per band, BTM (Best Tuning Memory). SiriusXM-Ready Compatible with SiriusXM Connect Tuner (220SXV300 sold separately). Package Contents Single-DIN source unit (10A fuse), 8.95" Touchscreen monitor, wiring harness w/ parking brake wire, SWC adapter, USB cables (52" & 23"), IR Remote (RM-X170), microphone w/ visor bracket, surface bracket, tape, screws, joint & rear-panel covers, Operating Instructions & Warranty. General Specs Receiver Type: Digital multimedia (no CD)Screen: 8.95" Resistive Anti-GlareMounting: Single-DIN chassis with floating displayRMS Power: 20W x 4Peak Power: 55W x 4EQ Bands: 10-band graphic EQBluetooth: Built-in 3.0EXTRA BASS & DSO: YesSmartphone Integration: Apple CarPlay Wired, Android Auto Wired, WebLink CastInputs: USB (rear), HDMI, Rear CameraAudio Formats: MP3, WMA, AAC, FLAC, WAVRadio: AM/FM w/ RDS, SiriusXM ReadyDisplay Dimensions: 9.005" x 5.335"Warranty: 3 Years Parts & Labour, 60 Days Returns

The Sony XAV-AX5500 is a premium 6.95″ double-DIN multimedia receiver featuring a capacitive touchscreen, Apple CarPlay, Android Auto, Bluetooth streaming, and powerful 5-volt preouts for enhanced system performance. Specification / Feature General Receiver Type: Digital multimedia (no CD) Screen Size: 6.95" Screen Type: Swipeable Capacitive Touchscreen w/ Gesture Control Resolution: 800 RGB x 480 (1,152,000 pixels) Mounting Size: Double-DIN chassis RMS Power (CTA-2006): 20W x 4 @ 4Ω, 20Hz–20kHz, 1% THD-N Peak Power: 55W x 4 (220W total) Preamp Voltage: 5V EQ Bands: 10-band graphic EQ (R&B, Rock, Pop, Dance, Hip-Hop, Electronica, Jazz, Soul, Country, Custom) ExtraBass: Yes Dynamic Stage Organizer (DSO): Yes Key Button Color: White CTA-2006 Compliant: Yes Smartphone Integration Apple CarPlay (Wired): iPhone 5+ (iOS 7.1+), rear USB1 port, Siri voice control, Maps, Music, Messages, Third-party apps (Spotify, Pandora, Tidal, Audible, etc.), Apple HomeKit support Android Auto (Wired): Android 5.0+ (USB1 rear port), Bluetooth pairing required, Google Maps & Waze, Google Assistant, SMS & Calls, Music streaming via YouTube Music and other apps Google Assistant: Voice commands via external mic; call, message, directions, music control WebLink: iOS 12+/Android 6.0+, access YouTube, Yelp, Zomato, device media libraries; parking brake required for video playback Siri Control: Yes iPhone Compatibility: iPhone 5+ Android Control: Yes Audio & DSP Preamp Outputs: 5-channel (Front/Rear/Mono Sub) Subwoofer Output: Yes, independent volume and phase control Low/High-Pass Filters: Front & rear speakers (50–120Hz selectable), subwoofer (50–120Hz) Dynamic Reality Amp 2: 47% less internal resistance for clean power output Beep Tone: Optional audible feedback Bluetooth Version: 3.0 Profiles: HFP 1.6, PBAP 1.1, A2DP 1.3, AVRCP 1.3, SSP Hands-Free Calls: External mic with adjustable gain, store up to 1,000 contacts, call history, redial Wireless Audio Streaming: SBC & AAC, song/artist info display (AVRCP 1.4 compatible) USB & Media Playback USB Ports: 2 rear (USB1-Smartphone: 1.5A, USB2-USB Memory: 0.5A) File Support: MP3, WMA, AAC, FLAC, WAV Video Playback: USB1 only (MPEG-4, WMV, MKV, Xvid), requires parking brake MTP/MSC: Supports USB MSC & MTP devices (audio & video playback) Max Folders/Files: USB1: unlimited folders / 20,000 files; USB2: 255 folders / 65,280 files USB Extension: 52" cable included; follow USB length & compatibility guidelines Radio AM/FM w/ RDS: Digital Clarity Tuner, 5 memory bands, 6 presets per band BTM (Best Tuning Memory): Selects stations with strongest signal SiriusXM Ready: Compatible with 220SXV300 tuner (sold separately) Touchscreen & Remote Wallpaper Options: 5 colours + USB JPEG Picture EQ: Dynamic, Standard, Theater, Custom (parking brake required) Aspect Ratio: Normal, Zoom, Full, Captions Dimmer: Auto / On, adjustable -5 to +5 Front-Panel Buttons: Volume, Source, Sound settings, Voice control Remote Control: IR wireless (RM-X170) + steering wheel control adapter compatibility Camera Integration Rearview Camera Input: Composite video input, parking guide lines, auto/manual selection Auto-Switching: Shifts to reverse automatically; approx. 1.1 sec Installation & Info Parking Brake Connection: Required for video/settings access Wireless Remote: Included Dimensions (Chassis) Depth: 5.065" Width: 7.015" Height: 3.945" Warranty & Returns Parts & Labour: 3 Years Returns: 60 Days Package Contents Digital media receiver w/ 6.95" touchscreen, wiring harness, remote control (RM-X170) with CR2025 battery, microphone w/ bracket, 52" USB extension, 2-sided tape, M5x9mm screws, operating instructions, warranty sheet

The Sony XAV-AX1000 is a 6.2″ double-DIN digital multimedia receiver with Apple CarPlay, Bluetooth hands-free calling, and a responsive touchscreen display — designed to bring modern smartphone connectivity to your vehicle. Specification / Feature General Receiver Type: Digital multimedia (no CD) Screen Size: 6.2" Screen Type: Resistive (Basic) Touchscreen RMS Power (CTA-2006): 20 watts x 4 Peak Power: 55 watts x 4 Preamp Voltage: 2V EQ Bands: 10-band graphic EQ Key Button Color: White Bluetooth Built-in Version 3.0, HFP 1.6, PBAP 1.1, A2DP 1.3, AVRCP 1.3, SSP Hands-Free Calls: External mic with adjustable gain, store up to 1,000 contacts, call history, redial Wireless Audio Streaming: SBC & AAC, song/artist info display Smartphone Integration Apple CarPlay: Wired, iPhone 5+ (iOS 7.1+), full Siri voice control, Maps, Music, Messages, supported apps (Spotify, Pandora, iHeartRadio, TuneIn, Audible, etc.) Siri Control: Yes, via Apple CarPlay iPhone Compatibility: iPhone 5 and newer Android Control: Yes Android Auto: No Audio & Expandability Preamp Outputs: 5-channel (Front/Rear/Sub) Subwoofer Output: Yes, independent volume and phase control High/Low Pass Filters: Yes, selectable frequencies SiriusXM Ready: Yes (tuner required) Steering Wheel Control: Adapter required Inputs USB Input: Front (1.5A charging, supports MSC playback: MP3, WMA, AAC, WAV, FLAC; video: Xvid, MPEG-4, MKV, WMV; photos: JPEG 6048x4032; 256 folders / 2,000 files max) AUX Input: Front (Mini 3.5mm), audio only Rear Camera Input: Yes, composite video; auto-switching when reversing; parking guide lines adjustable Media Playback Supported Formats: MP3, WMA, AAC, FLAC, WAV, Video: Xvid, MPEG-4, MKV, WMV, Photos: JPEG Radio AM/FM with RDS, Digital Clarity Tuner, 5 memory bands, 6 presets per band; BSM (Best Station Memory) selects strongest signals FM Sensitivity: 7 dBf Dimensions Chassis Depth: 4.975" Chassis Width: 7.015" Chassis Height: 3.935" Warranty Parts Warranty: 1 Year Labour Warranty: 1 Year Returns: 60 Days Touchscreen & Remote 6.2" Resistive touchscreen w/ Gesture Control, 800x480 resolution, Wallpaper options (Purple, Blue, Green, Red, Black), Picture EQ (Dynamic/Standard/Theater/Custom), Aspect Ratio (Normal/Zoom/Full/Captions), Dimmer Auto/On, 3-way rotary dial, IR Remote (RM-X170), SWC input compatible Package Contents Digital media receiver w/ 6.2" touchscreen, wiring harness (6.5' parking brake wire), remote control (RM-X170) w/ CR2025 battery, microphone w/ bracket, two-sided tape, 4 ISO screws, operating instructions, warranty sheet

The AlpineStyle LXR-CL30 Camping Lights provide versatile, high-performance illumination for any adventure. Compact and easy to install, these lights are perfect for 4WD canopies, trays, caravans, awnings, gazebos, and more. With multiple colour modes, a built-in dimmer switch, and durable, weatherproof construction, LXR-CL30 ensures reliable lighting in even the harshest conditions. FEATURES Three Colour Modes – Amber, Cool White, or Cool White + Amber High-Output 6.2W OSRAM™ OSLON LED Modules – 50,000+ hours lifespan Magnetic Backing for Easy Installation – Quick temporary mounting Mounting Holes for Permanent Installation – Bolt/screw for secure positioning Built-in Dimmer Switch – Adjust brightness easily anytime IP68 & IP69K Rated – Dustproof, waterproof, and high-pressure resistant Waterproof Connector & Tail Lead Included – Simplifies installation Insect Repelling Amber Spectrum – Minimises attraction to insects Durable Construction – High-quality Dupont finish SPECIFICATIONS Panel Size: 60 cm Raw Lumen Output: 3000 lm Colour Temperature: 1650K–6700K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 9.2W (High) / 1.8W (Low) Current Draw: 0.7A @ 13.2V (High) / 0.13A @ 13.2V (Low) Operating Temperature: -40° ~ 145°C Paint Finish: Dupont

Compact yet powerful, the Alpine Style LXR-AM3 3-Inch LED Worklight delivers high-output illumination for tight mounting locations without compromising performance. Designed for modern 4×4 setups, this rugged worklight is perfect for off-road adventures, work sites, camping, and night driving. Built tough with precision engineering, it offers reliable, long-lasting performance in even the harshest conditions.   FEATURES Spotlight Beam Type – Focused long-distance illumination for precision lighting LEXAN™ 143R Polycarbonate Resin Lens – High-impact, UV-resistant, thermally stable IP68 & IP69K Rated – Dustproof, waterproof, and resistant to high-pressure washes High-Output OSRAM® 10W LED Modules – Powerful light with 50,000+ hour lifespan Includes Wiring Harness – Waterproof connectors for easy installation Robust 6063 Aluminium Housing – Durable, heat-dissipating body Steel Mounting Hardware Included – Secure and adjustable installation Included Gloss Black Alpine Style Lens Cover – Protects lens when not in use SPECIFICATIONS Panel Size: 3-Inch Raw Lumen Output: 4416 lm 1 Lux Distance: 173 m Colour Temperature: 5700K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 27W Current Draw: 2.1A @ 13.2V Operating Temperature: -40° ~ 145°C Paint Finish: Dupont

Compliment your build with the AlpineStyle LXR-SP6 LED RGB Rock Lights, a premium lighting solution designed for serious off-road performance and visual impact. Sold as a set of six high-output RGB pods, these lights deliver powerful, even illumination on the trail, at camp, or on display. With full app control, instantly adjust colours, brightness, zones, and dynamic effects from your smartphone. Choose from millions of colours or crisp white light, blending function and flair for night driving or show mode. Built to withstand mud, water, dust, and vibration, the LXR-SP6 provides reliable performance in the harshest conditions. Featuring low-profile design and robust Lexan™ 143R lenses, these modules can be mounted in wheel wells, underbody accents, engine bays, side rails, and more, giving you total versatility and complete lighting control.   FEATURES Osram RGBW LED Chipset – Full spectrum RGB + crisp white 50,000+ Hour Lifespan – Long-lasting, reliable illumination IP68 & IP69K Rated – Dustproof and high-pressure water resistant App Control – iOS & Android via included Bluetooth receiver module* Includes Wiring Harness – Waterproof connectors for easy installation Robust 6063 Aluminium Housing – Excellent heat dissipation and durability 316 Stainless Steel Mounting Hardware Included Lexan™ 143R Resin Lens – High impact and UV resistant *It is recommended to install the Bluetooth receiver module away from direct exposure to the elements. SPECIFICATIONS Size: 2.5-Inch Power: 9W LED Beam Angle: 120° LED Module Lifespan: Up to 50,000 Hours Operating Voltage: 10–30V DC Waterproof Rating: IP68, IP69K

Engineered for explorers who demand durability and performance, the AlpineStyle AltitudeMax LXR-AM20 delivers powerful, wide-reaching illumination for ultimate on and off-road visibility. Featuring high-output OSRAM® LED modules, ultra long-distance beam projection, and IP68 & IP69K water and dust protection, it provides reliable lighting in the toughest conditions. With a rugged steel alloy housing, impact-resistant LEXAN™ lens, universal mounting versatility, included wiring harness, and protective lens covers, the LXR-AM20 is designed for uncompromising performance—see further, drive longer, and tackle extreme terrain with confidence. FEATURES Combination Beam Pattern – Spot & Flood for maximum distance and wide coverage LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 5W LED Modules 50,000+ Hour LED Lifespan Includes Wiring Harness with waterproof connectors Heavy-Duty 6063 Aluminium Housing for superior heat dissipation 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 22-Inch Raw Lumen Output: 95,200 lm 1 Lux Distance: 528 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 87W Current Draw: 6.6A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

32" AltitudeMax Slimline LED High Output Light Bar Alpine Style's ultimate high-output lightsbars are engineered to flood and focus the trail with blistering, long-range illumination, cut through darkness to expose every obstacle. Built tough for extreme conditions and precision crafted for reliable performance. Pair relentless power with Alpine Style's signature durability for night-time expeditions and off-road missions. Features Osram LED Chipset Robust 6063 Aluminium Housing Includes 316 Stainless Hardware IP68 & IP69K Waterproof Rating Combination Beam Includes Wiring Harness

Built for explorers who refuse to stop where the road ends, the AlpineStyle AltitudeMax LXR-AM40 delivers powerful, wide-reaching illumination for ultimate on and off-road visibility. Featuring high-output OSRAM® LED modules, ultra long-distance beam performance, and IP68 & IP69K water and dust protection, it’s engineered to handle the harshest environments with confidence. With a rugged steel alloy housing, impact-resistant LEXAN™ lens, universal mounting versatility, and included wiring harness and lens covers, the LXR-AM40 combines uncompromising performance, durability, and refined Alpine Style design—ready for any adventure, anywhere. FEATURES Combination Beam Pattern – Spot & Flood for maximum distance and wide coverage LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 5W LED Modules 50,000+ Hour LED Lifespan Includes Wiring Harness with waterproof connectors Heavy-Duty 6063 Aluminium Housing for superior heat dissipation 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 42-Inch Raw Lumen Output: 19,040 lm 1 Lux Distance: 608 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 190W Current Draw: 14.4A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

Built to handle the toughest terrain, the AlpineStyle LXR-SP7 delivers powerful, controlled illumination with rugged reliability and sleek, OEM-inspired styling. Featuring high-output OSRAM® LED modules, integrated white and amber DRLs, and IP68 & IP69K water and dust protection, it provides confident visibility through rocky trails, dense bush, and remote backcountry. With an impact-resistant Lexan™ lens, advanced heat dissipation, universal vehicle fitment, and included protective lens covers, the LXR-SP7 is engineered for uncompromising performance—push further, drive longer, and tackle extreme conditions with confidence.   FEATURES Combination Beam Pattern – Spot & Flood for distance and wide coverage Integrated White / Amber Daytime Running Lights (DRL) LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 6W LED Modules 50,000+ Hour LED Lifespan Heavy-Duty 6063 Aluminium Housing for superior heat dissipation Includes Wiring Harness with waterproof connectors 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 7-Inch Beam Angle: 120° Raw Lumen Output: 21,600 lm 1 Lux Distance: 768 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 96W Current Draw: 7.3A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

Designed for serious off-road use, the AlpineStyle LXR-SP9 delivers powerful long-distance illumination with rugged reliability and refined, OEM-inspired styling. Featuring high-output OSRAM® LEDs, integrated white & amber DRLs, and IP68 & IP69K water and dust protection, it provides confident visibility across rocky trails, bush tracks, and remote terrain. Built with an impact-resistant Lexan™ lens, advanced heat dissipation, and a durable cast alloy housing, the LXR-SP9 is engineered to perform in the harshest conditions—no compromises, just dependable lighting where it matters most. FEATURES Combination Beam Pattern – Spot & Flood for distance and wide coverage Integrated White / Amber Daytime Running Lights (DRL) LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 6W LED Modules 50,000+ Hour LED Lifespan Heavy-Duty 6063 Aluminium Housing for superior heat dissipation Includes Wiring Harness with waterproof connectors 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 9-Inch Beam Angle: 120° Raw Lumen Output: 27,000 lm 1 Lux Distance: 903 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 121W Current Draw: 9.18A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating