Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration. The HDP-D90 DSP Amplifier has a 192kHz/32Bit internal sampling rate and an ultra-wide audio bandwidth of 10Hz-110kHz to reproduce sound at its intended high-resolution spec. Intentional designs, like a copper-plated chassis, bring the signal-to-noise ratio up to >110dB and minimise noise and distortion during playback. Drawing inspiration from the internal Master Clock Management System in the AlpineF#1Status DSP, the HDP-D90 contains a Crystal Oscillator Clock Generator at the core of the unit that tracks and aligns digital information to eliminate jitter (timing errors) and accurately reproduce sound. The DSP has multiple input options for flexible system building. For vehicles that are unable to replace the factory Head Unit, the DSP has 12-channels of high-level inputs that allow the factory Head Unit to be retained. The DSP amp also has an optical input to add the Alpine Status HDS-990 Media Player or analog inputs for another aftermarket Head Unit. The HDP-D90 (when used in stand-alone mode) can also receive music sent directly from a smartphone with Bluetooth wireless streaming. While the HDP-D90 has 12-channels of amplification (8x 50W x 4x 80W) and can be used to power an entire system, 10-channels of RCA output can be used to add Alpine Status amplifiers for more power or system building. Features Hi-Res Audio DSP Amplifier (192kHz / 32bit max sampling rate without down-sampling) Built-in 12-channel amplifier (8x 50 Watts + 4x 80 Watts @ 4Ω, 14,4V) MUSES 8820 operational amplifier Highly flexible system configuration Matrix input summing High-Class XO (1/1.000) Crystal Oscillator Clock Generator 31-Band / Channel Parametric / Graphic Equalizer Digital Time Correction External Bluetooth dongle included High-performance PC software Optional controller available (RUX-C810) Specifications Performance Power Output (rated 4Ω, 14,4V, 10% THD): 8x 50 Watt + 4x 80 Watt THD+N RCA: 1W into 4Ω ≤0.01% S/N RCA: A-wt ≥100dB Input Voltage: High level 26 Vpp / RCA 8 Vpp Output Voltage: High level CH1～8: 40 Vpp, CH9～12: 50 Vpp / RCA 10 Vpp Frequency Response (1W into 4Ω): 20Hz～40kHz General Input Impedance: High level 14Ω / RCA 10kΩ System Sampling Rate: 192kHz/32bit Operating Voltage: 9～16V Standby Power Consumption: ≤0.1W Remote Start Input High-Level (H1-/H1+), ACC optional Remote Start Output: 12V (0.2A) Output Channel Signal Gain Range: -60dB～+6dB Output Signal EqualizerType: Parametric / Graphic EqualizerFrequency: 20Hz～40kHz (1Hz steps)Q value: 0.404～28.852Gain: -12.0dB～+12.0dB (0.1dB steps) Output Signal DividerPass independent filtersFilter type: Link-Ril, Bessel, Butter-WFilter crossover point: 20Hz～40kHz (1Hz steps)Filter slope: -6dB/Oct～-48dB/Oct Output Phase: normal phase or reverse phase (0°～360°) Output Delay: 0.000～20.000ms、0～692cm、0～273inch Preset Sound Effects: 6 sound data presets Weight 4.5kg Dimensions: Width 278mm / Depth 256mm / Height 58mm

Alpine introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration. The HDA-V90 Hi-Res Audio certified 5 channel amplifier redefines the industry benchmark in sound performance, delivering true high-resolution sound reproduction. The all-new digital design provides huge amounts of power output and an extraordinary damping factor making these amplifiers class-leading in every way. With performance at the highest standard, the HDA-V90 has a frequency response of 10-60kHz and a CH1-4: >500, CH5: >1,000 dampening factor to deliver high power output with precision, as well as a superlative high-definition sound experience. General RMS Output Power, 75Wx4ch+300Wx1ch (4Ω), 100Wx4ch+500Wx1ch (2Ω), Bridged 200Wx2ch (4Ω) THD+N ≤0.02% (10W), ≤0.07% (Rated Power) S/N Ratio CH1-4: >105dB, CH-5: >104dB Frequency Response (-3dB) 10-60kHz (Hi-Res) Damping Factor CH1-4: >500, CH-5: >1,000 Size (mm) W297xD192xH50.8

Alpine introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration. The HDA-F60 Hi-Res Audio certified 4 channel amplifier redefines the industry benchmark in sound performance, delivering true high-resolution sound reproduction. The all-new digital design provides huge amounts of power output and an extraordinary damping factor making these amplifiers class-leading in every way. With performance at the highest standard, the HDA-F60 has a frequency response of 10-60kHz and a >500 dampening factor to deliver high power output with precision, as well as a superlative high-definition sound experience. General RMS Output Power 100Wx4ch (4Ω), 150Wx4ch (2Ω), Bridged 300Wx2ch (4Ω) THD+N ≤0.02% (10W),≤0.07% (Rated Power) S/N Ratio >106dB Frequency Response (-3dB) 10-60kHz (Hi-Res) Damping Factor >500 Size (mm) W297xD192xH50.8

Alpine introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration. With its all-new and exclusive digital design delivers huge amounts of power output which makes this mono amplifier class-leading in every way. The HDA-M80 delivers unrivalled powerful bass, big dynamic sound, non-shutdown performance and easy vertical or horizontal installation. General RMS Output Power: 500Wx1ch (4Ω), 800Wx1ch (2Ω) THD+N ≤0.02% (10W),≤0.07% (Rated Power) S/N Ratio >107dB Frequency Response (-3dB) 8-400Hz Damping Factor >1,500 Size (mm) W297xD192xH50.8

The all-new R-Series shallow profile subwoofers are extreme in every way, commanding a tough and rugged appearance with high performance bass output to match. Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600Watts RMS and 1800Watts max. Moreover, with its bespoke cast aluminium frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance. Alpine’s R-Series Shallow Subwoofer Enclosures give you the best of both worlds in size and sound. What’s more, the pre-fitted KTE-RS12G exudes a tough look and adds a premium finish, all-while giving your equipment the protection it deserves. More bass with less space—Alpine’s new Shallow R-Series Enclosures rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit virtually any vehicle and application. Features 12” High-Performance Shallow Bass Driver Alpine Gen2 DD Linear Magnetic Circuit Cast Aluminum Frame Aluminum Dust Cap Neodymium Magnet 4″ High Temperature Voice Coil Optimal sealed cabinet quality CARB compliant ¾” MDF construction Premium Alpine embroidered black carpet Alpine-branded terminal cup Pre-installed steel mesh grille Includes a 12” R-Shallow Subwoofer (RS-W12D4) Rubber, modular stackable foot design   Specifications RMS Power Handling: 600W Peak Power Handling: 1800W X-Max: 20mm Nominal Impedance: 2ohms (4ohms+4ohms) Frequency Response: 26Hz-200Hz Sensitivity: (1W/1M): 81dB Voice Coil: 4″ (102mm) Mounting Dimensions: 673mm (W) x 133mm (H) x 432mm (D)

The all-new R-Series shallow profile subwoofers are extreme in every way, commanding a tough and rugged appearance with high performance bass output to match. Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600Watts RMS and 1800Watts max. Moreover, with its bespoke cast aluminium frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance. Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound. What’s more, the optional mesh grille KTE-RS12G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves. More bass with less space—Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application. Features 12” High-Performance Shallow Bass Driver Alpine Gen2 DD Linear Magnetic Circuit Cast Aluminum Frame Aluminum Dust Cap Neodymium Magnet 4″ High Temperature Voice Coil Optimal sealed cabinet quality CARB compliant ¾” MDF construction Premium Alpine embroidered black carpet Alpine-branded terminal cup Pre-installed steel mesh grille Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design   Specifications RMS Power Handling: 600W Peak Power Handling: 1800W X-Max: 20mm Nominal Impedance: 2ohms (4ohms+4ohms) Frequency Response: 29Hz-200Hz Sensitivity: (1W/1M): 83dB Voice Coil: 4″ (102mm) Mounting Dimensions: 537mm (W) x 133mm (H) x  406mm (D)

The all-new R-Series shallow profile subwoofers are extreme in every way, commanding a tough and rugged appearance with high performance bass output to match. Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600Watts RMS and 1800Watts max. Moreover, with its bespoke cast aluminium frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance. Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound. What’s more, the optional mesh grille KTE-RS12G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves. More bass with less space—Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application. Features 12” High-Performance Shallow Bass Driver Alpine Gen2 DD Linear Magnetic Circuit Cast Aluminum Frame Aluminum Dust Cap Neodymium Magnet 4″ High Temperature Voice Coil Heavy-gauge Screw Terminals Compatible with KTE-RS12G Subwoofer Grille   Specifications RMS Power Handling: 600W Peak Power Handling: 1800W X-Max: 20mm Nominal Impedance: 2ohms+2ohms Frequency Response: 26Hz-200Hz Sensitivity: (1W/1M): 81dB Voice Coil: 4″ (102mm) Mounting Dimensions: 295mm diameter x 81.7mm depth

The all-new R-Series shallow profile subwoofers are extreme in every way, commanding a tough and rugged appearance with high performance bass output to match. Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600Watts RMS and 1800Watts max. Moreover, with its bespoke cast aluminium frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance. Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound. What’s more, the optional mesh grille KTE-RS10G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves. More bass with less space—Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application Features 10” High-Performance Shallow Bass Driver Alpine Gen2 DD Linear Magnetic Circuit Cast Aluminum Frame Aluminum Dust Cap Neodymium Magnet 4″ High Temperature Voice Coil Heavy-gauge Screw Terminals Compatible with KTE-RS10G Subwoofer Grille   Specifications RMS Power Handling: 600W Peak Power Handling: 1800W X-Max: 20mm Nominal Impedance: 4ohms+4ohms Frequency Response: 29Hz-200Hz Sensitivity: (1W/1M): 83dB Voice Coil: 4″ (102mm) Mounting Dimensions: 243mm diameter x 81mm depth

The all-new ALPINE R-Series 10" Shallow Profile Dual 2 Ohm Dvc High Performance Subwoofer - RS-W10D2  shallow profile subwoofers are extreme in every way, commanding a tough and rugged appearance with high performance bass output to match. Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600Watts RMS and 1800Watts max. Moreover, with its bespoke cast aluminium frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance. Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound. What’s more, the optional mesh grille KTE-RS10G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves. More bass with less space—Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application. Features 10” High-Performance Shallow Bass Driver Alpine Gen2 DD Linear Magnetic Circuit Cast Aluminum Frame Aluminum Dust Cap Neodymium Magnet 4″ High Temperature Voice Coil Heavy-gauge Screw Terminals Compatible with KTE-RS10G Subwoofer Grille   Specifications RMS Power Handling: 600W Peak Power Handling: 1800W X-Max: 20mm Nominal Impedance: 2ohms+2ohms Frequency Response: 29Hz-200Hz Sensitivity: (1W/1M): 83dB Voice Coil: 4″ (102mm) Mounting Dimensions: 243mm diameter x 81mm depth

All-in-One Solution Enhance your factory or aftermarket radio and sound system with the Alpine OPTIM™8. Featuring a built-in 8-channel amplifier with Hi-Res Audio playback up to 96kHz/24Bit, the OPTIM™8 is the all-in-one sound solution to amplify and effortlessly sound-tune your system in minutes. Automatic Sound Tuning Tune your entire sound system in under five minutes with the innovative auto-tuning capabilities of the Alpine OPTIM™8. Using the PC App and a mic kit (sold separately) or the OPTIM8 IOS App and built-in microphone on an iPhone® 10 or newer, measure, correct, and tune your system to your desired listening preference through fast and easy guided tuning instructions. Guided Self-Tuning The Alpine OPTIM8 removes all the complexities of tuning a sound system by providing a simple, self-guided process via the OPTIM8 iPhone app or PC app to quickly and precisely measure your vehicle's interior. This innovative Auto-EQ software analyses your vehicle's acoustic environment and intelligently adjusts to optimise the audio output for your vehicle. Flexible Application The OPTIM8 gives you the flexibility to use your factory radio and sound system or tie in an aftermarket radio and sound system. The built-in amplifier boasts 50W x 6 @ 4-ohm + 150W x 2 @ 4-ohm, or 50W x 6 @ 2-ohm + 300W x 2 @ 2-ohm, for a solution that's able to power a full sound system. Digital inputs include Coax and USB (DAC) while a high-level speaker input of up to 30V allows the OPTIM8 to connect to a factory amplifier. You can also stream music directly to your head unit using Bluetooth streaming capabilities. Customised Listening Experience The Alpine OPTIM8 removes all the complexities of tuning a sound system by providing a simple, self-guided process via the OPTIM8 iPhone app or PC app to quickly and precisely measure your vehicle's interior. This innovative Auto-EQ software analyses your vehicle's acoustic environment and intelligently adjusts to optimise the audio output for your vehicle.

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget. The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat. A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget. The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat. A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. Features Install Terminal Layout: Two-sided Included terminal covers Screw terminals (for speaker and power cables) General Class-D Amplification (Digital) Channel Design: Mono Channel Side panel controls Thermal Management Control Top Mounted LED Power/Status Indicator Speaker Level Input 3 turn-on modes (DC HI, Remote HI, Remote LO) Input Channel Selector Switch for Subwoofer Crossover: Variable Low-pass Filter (LPF) Adjustable Gain Control Bass EQ Remote Bass Control (RUX-KNOB2) Ready Specifications RMS Power Ratings Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1200W Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 600W Sound Tuning Crossover: Variable LPF: 50-400Hz (-24dB/oct) Bass EQ (+12dB) General Power Requirements: 14.4 V.DC (9 – 16 V allowable) Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V High Level Input with automatic power on Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz THD+N (@ 10W into 4 Ohms): <0.03% Damping Factor: >750 Weight: 4.0kg Dimensions Heat Sink (WxHxD) mm: 352 x 57 x 210  

Features Hi-Res Audio certified 3-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Mid-range diameter: 96mm Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm / mid-range 39mm Cutout diameter: woofer 142mm / mid-range 79mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 3-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Mid-range diameter: 96mm Tweeter diameter (slim-fit): 40mm (58mm with housing) Aluminum die-cast baskets Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm / mid-range 39mm Cutout diameter: woofer 142mm / mid-range 79mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 2-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm Cutout diameter: woofer 142mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 2-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm Cutout diameter: woofer 142mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 2-Way coaxial speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Aluminum die-cast baskets Backed carbon fiber cones Double-gathered edge Included speaker grills Integrated Wave Guide on tweeters Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm / mid-range 39mm Cutout diameter: woofer 142mm / mid-range 79mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features AlpineF#1Status speaker trickle-down technology Maximum Peak Power Handling: 1200 Watts Maximum RMS Power Handling: 400 Watts Aluminum die-cast frame Backed carbon fiber cone Double-gathered edge Heavy-gauge screw-type cable terminals High-performance ferrite magnet   Thiele / Small Parameters Re: 6.03 Ohm fs: 30.8 Hz Mms: 387.143 g Rms: 12.368 kg/s Cms: 0.069 mm/N BI: 29.491 N/A Qms: 6,048 Qes: 0,519 Qts: 0,478 Vas: 48.9213 l Sd: 706.86 cm2 Specifications Impedance: 2 Ohm + 2 Ohm Woofer diameter: 279mm Cut-out diameter: 251mm Mounting depth: 196mm Sensitivity 84dB SPL (2.83 V x2 @ 1 m) Frequency Response: 25Hz – 300Hz Recommended amplification: up to 200W / 2 Ohm RMS per channel   Recommended Enclosure Specifications Sealed Enclosure Volume: 32 Litre Ported Enclosure Volume: 40 Litre Port Diameter: 100mm Port Length: 500mm

Features Hi-Res Audio Media Player (192kHz / 24bit max sampling rate with down-sampling) External control unit with hide-away 1DIN media-box Colour display 3 USB Ports (1 front / 2 back ports) for audio playback Bluetooth Audio Streaming (LDAC, aptX HD) 4x 50Watts built-In amplifier 6-channel 31-band Parametric EQ 3-way digital X-Over Digital Time Correction MP3, WMA, AAC, MP4, WAV, FLAC, APE and DSD playback 4-channel high-level inputs 2-channel AUX inputs (RCA) 4-channel high-level outputs (4x 50 Watts) 6-channel RCA outputs Optical TOSLINK output Coaxial output Rotary encoder Blue button illumination

ALPINE 200 SERIES 2008-2015 GX / GXL AND 2016+ GX -9" SOLUTION WITH HIRES SCREEN , WIRELESS APPLE AND ANDROID AND PFK KIT -I905-LC08 Alpine’s innovation continues with the unique design of the i905-LC08, delivering an innovation masterpiece created for the digital era. Housed within the premium OEM quality fascia is the all-new 9″ WXGA high definition display that showcases all your media in stunning contrast and clarity. The new keyset with centre glass keys are immediately identifiable as a signature Alpine product, and has a great tactile feel and feedback. Equipped with wireless Apple CarPlay and Android Auto (USB), an endless array of entertainment and smartphone apps are available to use in your dashboard. Get directions with maps and navigation apps, send and receive messages, make calls and listen to music all without a cable in sight. With TIDAL now built-in, soak in your favourite songs with a new level of fidelity and elevate your music streaming experience in wireless Hi-Res audio like you’ve never heard it before. For those with a large existing library of Hi-Res audio content that is also supported up to 96kHz 24bit. A world-first innovation, the i905-LC08 equipped with a powerful built-in Class-D amplifier to deliver the richness and dynamics of your music for the most superior sound performance. Moreover, with Alpine’s extensive sound tuning built-in you can apply simple one touch audio adjustments to make your cabin space sound brilliant, or for pro-level users and enthusiasts a host of advanced tuning functions are available. Alpine’s i905-LC08 is the complete audiophile and lifestyle solution for all 200 Series enthusiasts—not only creating a dynamic interior appeal, but also delivering an incredible connectivity and multimedia experience with impeccable audio performance. Alpine I905-LC08 to suit 200 Series LandCruiser 9Inch replacement with Wireless Apple Carplay Introducing the i905 for LandCruiser 200 Series, now available for purchase! This cutting-edge 9" integrated audio receiver delivers high-resolution audio and comes equipped with Wireless Apple CarPlay, Android Auto (USB), HDMI, USB, dual camera, Bluetooth, Hi-Res Audio Wireless, LDAC, and DAB+ functionality. Designed specifically for the LandCruiser 200 Series (model years 2008-2015), the i905 offers seamless connectivity and crystal-clear sound quality. Upgrade your driving experience with the i905 for LandCruiser 200 Series. The Alpine i905-LC08 is a remarkable product, designed to cater to the digital era. It is housed within a premium OEM quality fascia, which holds a 9” WXGA high-definition display that showcases all your media with clarity and stunning contrast. The new keyset features centre glass keys that are easily recognizable as an Alpine signature product and have a great tactile feel and feedback. The i905-LC08 comes with wireless Apple CarPlay and Android Auto (USB), allowing access to a wide range of entertainment and smartphone apps without any cables. With TIDAL now built-in, you can stream your favorite songs with a new level of fidelity and elevate your music streaming experience in wireless Hi-Res audio. For those with a large existing library of Hi-Res audio content, the device supports up to 96kHz 24bit. The i905-LC08 is a complete audiophile and lifestyle solution for all 200 Series enthusiasts. It not only creates a dynamic interior appeal but also delivers an incredible connectivity and multimedia experience with impeccable audio performance. The device is equipped with a powerful built-in Class-D amplifier that delivers the richness and dynamics of your music for the most superior sound performance. Additionally, with Alpine’s extensive sound tuning built-in, you can apply simple one-touch audio adjustments to make your cabin space sound brilliant. For pro-level users and enthusiasts, a host of advanced tuning functions are available. Alpine’s incredible WXGA display features laminated display technology that provides brightness and contrast that is truly next level. The display technology is enhanced by the device’s built-in GPS/GLONASS circuit and antenna, as well as vehicle speed pulse sense connectivity, which ensures your actual vehicle position has pin-point accuracy on the road. The i905-LC08 also features TIDAL built-in, which allows you to stream all your favorite artists wirelessly in incredible master-quality definition. Additionally, Spotify provides access to millions of tracks and episodes available. With Hi-Res Audio certification and USB and wireless connectivity, the i905-LC08 supports up to 192kHz/24Bit FLAC/WAV and APE high-resolution audio files with their intended playback specification of 96kHz/24Bit. This ensures that no longer do you have to compromise your listening experience lost in highly-compressed traditional audio formats. The Alpine i905-LC08 is a complete audiophile and lifestyle solution, offering connectivity and multimedia experience with impeccable audio performance. The device is designed to cater to all 200 Series enthusiasts, creating a dynamic interior appeal and delivering an incredible audio experience. High-Definition Laminated Display Alpine’s incredible WXGA display has to be seen to be believed, colours are intensely vibrant and realistic, video motion is ultra-smooth and the image detail is razor sharp. Moreover, with its laminated display technology brightness and contrast is truly next level, so no matter the lighting conditions or viewing angle the display reveals incredible clarity and true-to-life colour. Alpine’s new WXGA high definition display is simply stunningly beautiful—bringing a cinematic experience right into your dashboard. Apple CarPlay Wireless or USB No wires, no fuss, just get in and drive with your iPhone wirelessly connected to use Apple CarPlay. Listen to your favourite music apps, make and receive calls or messages, use maps or navigation apps, all at your command via the display or voice control. If you need to charge-up then plug-in your iPhone via USB. Android Auto  The convenience of Android Auto lets you bring the ever-expanding apps into the dash of your car. From either the display or voice command you can make calls, send and receive messages, play music apps or set a destination via Google Maps or Waze.   Smartphone Navigation  Through the incredible Alpine WXGA high-definition display you have the access and convenience of highly accurate navigation, further enhancing the Apple CarPlay and Android Auto and experience. With an array of navigation platforms and apps available, for example Apple Maps, Google Maps, Waze and Sygic you can search and get to your destination with ease. You’ll have voice and visual prompts of turn-by-turn navigation and finding locations is a breeze via the display or using voice control. Furthermore, with the built-in GPS/GLONASS circuit and antenna, as well as vehicle speed pulse sense connectivity ensures your actual vehicle position has pin-point accuracy on the road. This keeps you on route when driving through complex and dense city road systems, tunnels, bridges and elevated mountain highways and terrains. Tidal Built-In With TIDAL built-in, stream all your favourite artists wirelessly in incredible master-quality definition. Providing you exclusive access to high-profile music and original content – experience a more intimate connection with music creators through intuitive playlist curation and ability to save your favourite albums, tracks or playlists to the preset menu for quick access. Furthermore, MQA Studio playback ensures absolute audio authenticity, exactly to the artists original recording. Never before seen in car audio, TIDAL’s wireless Hi-Res audio streaming is a must for the modern audiophile. Spotify Access the worlds music library with millions of tracks and episodes available on Spotify. When using Apple CarPlay or Android Auto with the Spotify app, you can play the latest songs from your favourite artists, charts and playlists. Plus, browse through the collections of friends, artists, celebrities and radio stations all from the comfort of the driver’s seat. All this, without a single physical connection thanks to the added convenience of Wireless Apple CarPlay and Android Auto. Hi-Res Audio Certified with USB and Wireless Connectivity Audiophile and music fans can now enjoy a true high-fidelity audio experience with the astonishing detail and musical beauty of Hi-Res Audio. The i905-LC08 supports up to 192kHz/24Bit FLAC/WAV and APE high-resolution audio files with their intended playback specification of 96kHz/24Bit. This means, no longer do you have to compromise your listening experience lost in highly-compressed traditional audio formats, in Hi-Res your music now comes alive with stunning clarity and every nuance revealed, just as the artist intended. When playing Hi-Res Audio files the i905-LC08 will display the Hi-Res icon and file bit rate. Even more impressive, equipped with Hi-Res Audio Wireless and LDAC technology, you can connect your smartphone via USB or wirelessly and use Hi-Res Audio streaming services or apps bringing a virtually limitless music library with the purest sound right inside your car. Built-in Class-D Amplifier An industry world first, the i905-LC08 is equipped with Class-D amplifier technology producing a massive 50 x 4 Watts of power, delivering the best sound quality and dynamics from high-resolution music. Class-D amplifiers are known to be highly efficient and capable of beautiful high-end sound reproduction with significantly reduced noise and phase shift. What’s more, new ultra-high-spec fans and internal heat sinks direct and dissipate any unwanted heat, ensuring optimum temperature control and audio performance. External Control Knob (RUE-BK01A sold separately) The RUE-BK01A external control knob (sold separately) connects wirelessly to the i905-LC08 and can be installed on either side of the display for added convenience. Alternatively, you can place the control knob anywhere else within the vehicle and for custom installation professionals the mounting possibilities are virtually endless. Rotation of the knob controls the unit volume output, while a push of the knob will cycle through your vehicles safety cameras on screen.   Advanced Sound Tuning Alpine sound quality performance is of the highest standards and with advanced sound tuning you are empowered with the tools to tune your system to perfection, as well as to the specific environment of your vehicle. Featuring a 56-band Parametric EQ in the advanced mode, a 2-way digital crossover, 6-channel digital time correction, plus several Bass Engine SQ and MediaXpander settings provides sound tuning for simple to comprehensive high-end systems with multiple power amplifiers, speakers and subwoofers. DAB+ Digital Radio  DAB+ provides you with a range of quality digital only stations that you can search by station name and genres. DAB+ offers a variety of stations with music eras and types, as well as talkback stations. DAB+ displays station info and music metadata, offers clearer sound and improved reception, achieving a noise free, crystal clear radio listening experience. Audio Streaming Apps With Apple Music onboard for Apple CarPlay you have access to 60+ million ad-free songs at your fingertips which you can search genres, artists, podcasts and expertly crafted playlists. With the use of Apple CarPlay or Android Auto, Amazon Music and YouTube Music provides limitless entertainment to stream or download songs from a list of over 40 million ad-free tracks. Amazon Music, YouTube Music and Apple Music are paid subscriptions. 2 x USB Connections The two rear USB ports allow for even greater flexibility. USB port 1 provides fast charging of your smartphone while using wireless connectivity, or you can connect your smartphone for wired connection of Apple CarPlay and Android Auto. Either USB Port 1 or 2 are your entertainment gateway, allowing audio and video playback via connection of a memory stick, portable drive or SSD. Built-In Bluetooth  Built-in Bluetooth enables wireless connection of a mobile phone for the convenience and safety of hands free phone and audio streaming. Plus, you can use voice control through the external microphone included. HDMI Connectivity  HDMI enables connectivity to a number of different devices including smartphone mirroring—making audio and video playback possible in high-definition through the 9” display for virtually limitless entertainment. Four Camera Input  The i905-LC08 provides the opportunity to add a reverse and either front or side camera directly to the unit itself. Those with a need for even more visibility requirements now have the ability to increase to a whopping 4 camera’s through the KCX-C250MC Multi-Camera Selector Interface (sold separately). All connected camera’s can be toggled directly from the camera screen, allowing a commanding view of any potential obstacles around your vehicle. Features Radio / DAB Tuner Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12) Memory: Auto Memory Seek Mode: Local, DX, Pre-Set, Service RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function BLUETOOTH® Built-in BLUETOOTH® Module V4.2 HFP (Hands-Free Profile) Compatible A2DP (Advanced Audio Distribution Profile) Compatible AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: (Outgoing and Incoming) 24 Menu Languages Microphone Included Works with iPhone® Compatible with iPhones featuring a lightning connector Various search functions and Album Artwork Display Battery Charging Connectivity Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone) Works with Android Auto (requires Android Auto enabled handset connected through USB)   **Not all handsets supported Navigation Function Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps Includes GPS / Glonass enabled navigation antenna USB Media Connection 2x USB cable included USB port 1: data port / USB port 2: charging port Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible Video Playback: MP4, MOV, FLV, MKV compatible Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2 Various search functions included Sound Tuning Bass Engine SQ and Bass Engine PRO sound tuning Subwoofer Level Adjustment 4 V PreOut 10 Equalizer PreSets 13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer 6-Channel Digital Time Correction 2-way Digital Crossover Independent Source Volume Level Setting General 4x 50 Watts Class-D High Power Amplifier 11-inch Capacitive Touch-Screen WXGA Display (1280 x 720p) Display angle adjustable after installation 3 PreOuts (4 V, Front / Rear / Subwoofer) 1 A/V AUX Input (3.5 mm micro jack) 1 HDMI input / 1 HDMI output 2 USB Ports (1x USB data port / 1x USB charging) Steering Wheel Remote Control Ready Vehicle Display Interface Ready (UART connection) Remote Control Ready 2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box Camera Distance Guides (adjustable) Live Contrast Adjustment Menu Language: 24 Languages Auto Dimmer Anti-theft security code Engine Start-Stop unaffected 3-Year Warranty when installed by Authorised Alpine Dealer Specifications General Power Requirement – 14.4V DC (11-16V allowable) Operating Temperature – -20°C to +60°C Power Output – 50W x 4 Maximum Current Consumption – 15A Audio Output Level Preout (Front, Rear): 4V/10k ohms (max.) Preout (Subwoofer): 4V/10k ohms (max.) Weight 2.3kg Screen Screen Size: 9 inch Laminated WXGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL FM Tuner Tuning Range –   87.5 -105MHz Mono Usable Sensitivity –   8.1 dBf (0.7μV/75 ohms) 50dB Quieting Sensitivity –   12dBf (1.1μV/75 ohms) Alternate Channel Selectivity –  80dB Signal-to-Noise Ratio –  65dB Stereo Seperation –  35dB AM Tuner Tuning Range –   531-1701 kHz Usable Sensitivity –  25.1μV/28 dBf DAB Tuner Tuning Range –   174 – 240 MHz Usable Sensitivity –   -100dBm Signal-to-Noise Ratio – 90dB USB (1) USB Requirements: USB 2.0 Max. Power Consumption: 2,400 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32, exFAT MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.005% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 95 dB Channel Separation (at 1kHz): 90 dB USB (2) USB Class: Charge Only Max. Power Consumption: 1,500 mA (CDP Support) BLUETOOTH® BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz) Output Power: +4 dBm/2.51 mW Ave. (Power Class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) HDMI Section Input Format: 720p/480p/VGA Output Format: 720p/480p GPS Reception Frequency 1575.42 +/- 1.023 MHz Reception Sensitivity (Search) -136dB max. Wi-Fi Frequency Ranges IEEE 802.11 b/g/n (2.4 GHz) IEEE 802.11 a/n/ac (5 GHz) Channels 1 -13 ch (2.4 GHz) 149 – 165 ch (5GHz) Security Protocols WPA3/WPA2-PSK (TKIP, AES) Dimensions Din Size: 1DIN chassis and 9” Capacitive Touch Screen Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm Display Size (W x H x D) mm: 268.9 x 178 x 54.7