10th Anniversary Edition - W7 13.5-inch Subwoofer (1500 W, Dual 1.5 Ω voice coils) Words like "extreme," "reference" and "ultimate" get thrown around quite a bit in the Subwoofer world, but rare is the product that can honestly lay claim to them. The 13W7AE does. Taking the W7 design formula to its highest level, the 13W7AE offers a staggering linear excursion envelope that exceeds 1.25 inches (32 mm) one-way, along with a suspension capable of over 4-inches of peak-to-peak excursion. Combine that with a piston diameter that is 28% larger than the 12W7AE's, and you have a serious high-performance driver for the most demanding applications. With a 13W7AE, limits simply vanish and amazing sub-bass happens... on all fronts, at any level. Our most potent Subwoofer is best used with amplifier power in the 500W - 1500W range and is optimized to operate in a 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.375 cu. ft. (67.3 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but they are distinguished by the following cosmetic differences: Satin-Black Powdercoated Baskets Bright Anodized Surround Clamp Ring Anniversary Edition Cone Badge Anniversary Edition Terminal Label General Specifications Continuous Power Handling (RMS) 1500 W Recommended Amplifier Power (RMS) 500 - 1500 W Nominal Impedance (Znom) Dual 1.5 Ω Physical Specifications Nominal Diameter 13.5 in / 345 mm Overall Diameter (A) 14 in / 356 mm Mounting Hole Diameter (B) 11.9 in / 302 mm Bolt Hole Circle Diameter (C) 12.7 in / 323 mm Motor Outer Diameter (D) 8.38 in / 213 mm Mounting Depth (E) 10.5 in / 267 mm Driver Displacement 0.21 cu ft / 5.9 L Net Weight 52 lb / 23.6 kg Parameters Free Air Resonance (Fs) 23.5 Hz Electrical “Q” (Qes) 0.476 Mechanical “Q” (Qms) 7.517 Total Speaker “Q” (Qts) 0.448 Equivalent Compliance (Vas) 3.68 cu ft / 104.3 L One-Way Linear Excursion (Xmax)* 1.25 in / 32 mm Reference Efficiency (no) 0.27% Efficiency (1 W / 1 m)** 86.3 dB SPL Effective Piston Area (Sd) 107.35 sq in / 0.0693 sq m DC Resistance (Re)*** 2.41 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 1.0 in / 25 mm Volume (net int.) 1.875 cu ft / 53.1 L External Width (W) 16 in / 407 mm External Height (H) 16 in / 407 mm External Depth (D) 18.875 in / 479 mm F3 37.4 Hz Fc 40.5 Hz Qtc 0.77 Enclosure NotesNet volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects. * The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker. This vent is located at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent. The dimensions given for the enclosure examples above take all applicable displacements into consideration Safety NoticeIt is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 1.0 in / 25 mm Volume (net int.) 2.375 cu ft / 67.3 L External Width (W) 25.875 in / 657 mm External Height (H) 16 in / 406 mm External Depth (D) 17.25 in / 438 mm Internal Slot Port Width (SW) 2.25 in / 57 mm Internal Slot Port Height (SH) 14.5 in / 368 mm Internal Slot Port Length (SL) 26.25 in / 667 mm Port Extension Length (EL) 7.875 in / 200 mm Tuning Frequency (Fb) 34.6 Hz F3 30.3 Hz Enclosure NotesNet volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects. * The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker.This vent is located at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent. The dimensions given for the enclosure examples above take all applicable displacements into consideration Safety NoticeIt is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration.

Give your head unit a breath of fresh air Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. TECHNOLOGY PLATFORM FROM FD AMPLIFIERS The technology used for Impulse 4.320 was inspired by the Performance range’s FD amplifiers. With an efficiency of more than 90%, Class D amplification has numerous advantages: less heat, low power consumption, low distortion at high volumes, compact…With the Impulse 4.320 amplifier, an unbeatable size/power ratio has been achieved. It delivers 4 x 55 or 2 x 160 Watts RMS at 4 Ohms. Thanks to the adequate power and the fast attack for realistic and more aerated sound, it will completely transform the sound of your front and rear speaker drivers. VERY EASY TO INSTALL AND PERFECT INTEGRATION Impulse 4.320 – Cables Measuring only 67/8 x 17/8 x 25/8″ (17.65 x 4.6 x 6.7 cm) Impulse 4.320 can easily be concealed within the dashboard or the centre console. Equipped with high-level (automatic detection feature) and low-level inputs, it is compatible with all head units. Supplied with all fastenings, an adaptor for the head unit’s speaker driver outputs, RCA adaptors for aftermarket head units and power connector, this amp was specially designed to be easy to install. No direct hook up to the vehicle’s battery is required. An optional ISO connector is available for “Plug&Play” connectivity via the head unit’s harness. Note: On certain cars, a harness adapter may be necessary. EXTREMELY VERSATILE To ensure compatibility with different head units, this amplifier features a 2-channel or 4-channel input selector switch. Most of all, Impulse 4.320 has been designed to power front and rear speaker drivers. However, it can also be used in a 3-channel or 2-channel mode in order to meet all needs for improving small installations and it can also be used for powering the front speaker drivers and a small subwoofer. Each pair of channels features an active crossover to adapt the sonic response according to the speaker drivers used. The front channels can be used for wideband speaker drivers or the high-pass filter can be used for frequencies above 75 Hz when only small speaker drivers are used. By avoiding having small speaker drivers reproduce very low frequencies, the sound will have more clarity. The rear channels are equipped with an active crossover (wideband, high-pass or low-pass) and with progressive phase adjustment for powering a small subwoofer or wideband speaker drivers of different sizes.

Extremely Versatile With the FPX 5.1200, installation of this hi-fi system is much easier as there's only one amplifier and one power supply to fit into the vehicle. In order to control this 5-channel installation (with front and rear speaker drivers, and a subwoofer), the FPX 5.1200 features a wide range of settings. The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs. For the main speaker drivers, each pair of channels has an adjustable active crossover. To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to. Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With the launch of the FPX 5.1200, Focal now offers a full range of amplifiers, from the Impulse ‘Plug & Play’ amplifier to the audiophile FPX amplifier. Through our compact FD amplifiers, Focal is able to meet the expectations of all those looking for a car audio amplifier. With its high power, great musicality and compact design, as well as being ideal for powering a complete installation with Flax or K2 Power speaker drivers, the FPX 5.1200 will meet all the expectations of hi-fi car audio enthusiasts. Extensive research for unprecedented power in a compact enclosure Delivering very high power from such a compact enclosure is a true challenge. The more heat an amplifier produces, the higher the risk of distortion affecting the system’s musicality. By using Class D technology, Focal has reduced the need for heat dissipation for its FPX range. However, in order to achieve high efficiency and to optimise reliability, FPX amplifiers required extensive research: the selection of the best components, a thick aluminium chassis, very precise positioning of the components, monitoring heat dissipation with a thermal camera and accelerated aging tests in draconian conditions. Focal’s goal is to offer electronics equipment which is very compact and powerful, but without sacrificing musicality. The dimensions of the 5-channel FPX 5.1200 amplifier (337 x 175 x 57mm / 13.25"x 6.8" x 2.25") are nearly the same as the FPX 4.400 SQ. The FPX 5.1200 has a maximum power of 4 x 120 Watts + 1 x 720 Watts at 2 Ohms!

The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. POWERFUL AND VERSATILE 420W MONO AMPLIFIER The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel. FOCAL FPX 1.1000 KEY FEATURES Mono Class D amplifier Complete range of settings (active crossover, subsonic filter, bass boost, phase control) Stable under 2 Ohms and 1 Ohm Output lines COLOSSAL POWER FOR SUCH A COMPACT CHASSIS Very compact and easy to integrate, the FPX 1.1000 amplifier has been specifically developed for powering all types of the subwoofer. It is stable at 4 Ohms, 2 Ohms and 1 Ohm, delivering a respective power of 420, 700 and 1000 Watts RMS. Whether it’s for an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs. It features all the settings you’d expect to find in such an efficient bass amplification system: an adjustable low-pass active crossover with a slope of 24 dB, subsonic filter with a slope of 24 dB, bass boost and phase control. The FPX 1.1000 comes supplied with remote control for controlling the bass from the dashboard, and a pair of output lines for hooking up a second amp. This is especially useful for setting up a bass channel with two subwoofers and two amplifiers. WHAT MAKES THE DIFFERENCE A powerful and ultra-compact amplifier Perfect for audiophile installations or powerful subwoofer systems Optimised heat dissipation Extremely versatile Remarkable power/performance/price ratio

4-CHANNEL AMPLIFIER – 4 X 70 W RMS The FPX 4.400 SQ is a very compact 4-channel amplifier with a power of 4 x 70 Watts RMS at 4 Ohms. Offering a 4 or 2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, makes the FPX 4.400 SQ very versatile and suitable to a range of system designs. Thanks to its high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair of output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line. FOCAL FPX 4.400 SQ KEY FEATURES 4-/2-channel Class A/B amplifier 70 Watts RMS x 4 at 4 ohms (100 Watts RMS x 4 @ 2 ohms) Stable at 2 Ohms CEA-2006 Compliant Class A/B Design for Best Available Sound Reproduction Active crossover for each pair of channels WHAT MAKES THE DIFFERENCE A compact and versatile amplifier Optimised heat dissipation Extremely versatile Remarkable power/performance/price ratio

The FDS 1.350 is a compact mono amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment. Mono D Class amplifier with dual output RCA inputs FOCAL FDS 1.350 KEY FEATURES D Class – Direct Fet ® Technology – Efficient heat dissipation and precision Stable under 2 Ohms Stackable aluminium chassis with high heat dissipation Low noise operational amplifier New Japan Radio® NJM4580 Low ESR capacitors – 105°C (220°F) Pseudo-balanced inputs Cable accessories included – easy to install

PS 165 V1 Description The Focal PC 165 V1 6.5″ 2-way coaxial speakers feature Partial horn loading of the tweeter and high sensitivity to ensure dynamics and neutrality even off high powered factory stereo systems. Features: Partial Horn Loading High Sensitivity Dynamics & Neutrality Adjustable Tweeter Levels 80W RMS Nominal Power Handling 160W RMS Max. Power Handling Specifications: 2-way coaxial kit Diameter: 61/2" (165mm) Voice-coil diameter: 1" (25mm) Voice-coil height: 01/2" (13mm) Motor: Magnet Aluminium/Magnesium inverted dome tweeter Cone: Flax Integrated crossover: 6dB/Oct Max. power: 140W Nom. power: 70W RMS Sensitivity (2.83V/1m): 91.9dB Frequency response: 60Hz – 28kHz Impedance: 4Ω Accessories: Supplied grilles

The compact PSB200 measures less than 51/8" deep (13cm deep, with the grille) and therefore slides easily into a car boot. And its size isn’t the only great feature: it is also easy to use and delivers quality sound performance thanks to its 8" subwoofer that has 250 watts of power. Delivered with brackets, screws and a set of hook-and-loop fastener, PSB200 can be fixed in various locations in your vehicle and it perfectly completes a 2 or 3-way audio system while remaining discreet and delivering precise and dynamic bass. With this passive enclosure, discover the pleasure of all sound nuances during your drive. Features: Easy to install 250W Max Compact Protection grille included MDF structure, rigid enclosure Includes screws, brackets and adhesive strip Specifications: Type: Sealed enclosure Subwoofer: 8" (200mm) Dimensions: (HxDxW) 12" x 4.9" x 19" (303.6 x 124.8 x 489mm) Weight: 15lbs (7kg) Impedance: 4Ω Max. power: 250W Nom. power: 150W Sensitivity (2.83 V/1 m): 83dB Frequency response: 45Hz - 150Hz Accessories: Screws, brackets and adhesive strip

The woofer is the result of a long study on the efficiency/frequency compromise and offers intense but subtle bass reproduction. The aluminum inverted-dome tweeter, hallmark of the brand, provides neutral treble reproduction, which is accurate and reliable up to the highest frequencies. Working on the tweeter formers produced an aesthetic match with the dashboard. Above all, thanks to its orientation and specific binding, the tweeter development greatly improved the original sound image (height, depth and width of soundstage).  IFP207 Technical Specifications Woofer Diameter 61/2″ (165mm) Cone Polyglass Basket ABS Voice coil 1″ (25mm) Magnet 31/3″ (85mm) Sensitivity 92.7dB Re 2.6 Ohms Bandwidth 70 Hz – 25 kHz Max. power 140 W RMS Power 70 W Integrated crossover 6/18 dB/oct (4kHz) Tweeter Aluminium/Magnesium inverted dome TNB Tweeter mounting Moulded for perfect integration in the original location and respect of the dashboard design.

This improvement solution perfectly adapted to your Peugeot car. This 2-way coaxial kit integrates easily and quickly into the original slots without major modification. Go straight to the next level with powerful, sensitive and faithful acoustics. IS PSA 165 Features Respect of the original Peugeot® connectors Better precision in high frequencies High-density rubber ring for acoustic sealing with the door panel Taking the PEUGEOT kit to another level Acoustic insulation (such as FOCAL BAM) can also be added to improve the sound of these speakers.

This improvement solution perfectly adapted to your Peugeot car. This 2-way coaxial kit integrates easily and quickly into the original slots without major modification. Go straight to the next level with powerful, sensitive and faithful acoustics. IC PSA 165 Features Respect of the original Peugeot® connectors Better precision in high frequencies High-density rubber ring for acoustic sealing with the door panel Taking the PEUGEOT kit to another level Acoustic insulation can also be added to improve the sound of these speakers.

dd Focal sound in your car by choosing the Focal Inside range! This solution is perfectly adapted to your Renault, Citroen, Peugeot, VW, BMW, Skoda, Subaru, Toyota or Nissan car or Harley Davidson motorcycle, is validated by the manufacturer and brings a new acoustic dimension to your cabin. These speaker kits integrate easily and quickly into the original factory mounts without altering the vehicle manufacturer’s warranty. Go straight to the next level with powerful, sensitive and faithful acoustics. These speakers are manufactured to match the acoustic contour of your car’s interior, therefore you can expect true hi-fi sound while keeping the vehicle looking unmodified. Renault, Nissan, Smart-specific 2-way composystem Original parts remain undamaged (100% retrofittable) Bass-midrange driver with polyglass cone Tweeter with inverse aluminum dome

Add Focal sound in your car by choosing the Focal Inside range! This solution is perfectly adapted to your Renault, Citroen, Peugeot, VW, BMW, Skoda, Subaru, Toyota or Nissan car or Harley Davidson motorcycle, is validated by the manufacturer and brings a new acoustic dimension to your cabin. These speaker kits integrate easily and quickly into the original factory mounts without altering the vehicle manufacturer’s warranty. Go straight to the next level with powerful, sensitive and faithful acoustics. These speakers are manufactured to match the acoustic contour of your car’s interior, therefore you can expect true hi-fi sound while keeping the vehicle looking unmodified. Please note some vehicles may have 165mm speakers in the rear and front, some even have additional tweeters (small speakers) fitted in the door/pillars of the vehicle. Please see the compatible vehicles below and check your vehicle’s speaker system before purchasing. IC REN 130 Key Features: Renault, Nissan, Smart-specific 2-way composystem Original parts remain undamaged (100% retrofittable) Bass-midrange driver with polyglass cone Tweeter with inverse aluminum dome

IS RNS 165 – 165MM 2 Way Coaxial Kit Add Focal sound in your car by choosing the Focal Inside range! This solution is perfectly adapted to your Renault, Citroen, Peugeot, VW, BMW, Skoda, Subaru, Toyota or Nissan car or Harley Davidson motorcycle, is validated by the manufacturer and brings a new acoustic dimension to your cabin. These speaker kits integrate easily and quickly into the original factory mounts without altering the vehicle manufacturer’s warranty. Go straight to the next level with powerful, sensitive and faithful acoustics. These speakers are manufactured to match the acoustic contour of your car’s interior, therefore you can expect true hi-fi sound while keeping the vehicle looking unmodified. IS RNS 165 Key Features: Renault, Nissan, Smart-specific 2-way composystem Original parts remain undamaged (100% retrofittable) Bass-midrange driver with polyglass cone Tweeter with inverse aluminum dome

IC RNS 165 – 165MM 2 Way Coaxial Kit Add Focal sound in your car by choosing the Focal Inside range! This solution is perfectly adapted to your Renault, Citroen, Peugeot, VW, BMW, Skoda, Subaru, Toyota or Nissan car or Harley Davidson motorcycle, is validated by the manufacturer and brings a new acoustic dimension to your cabin. These speaker kits integrate easily and quickly into the original factory mounts without altering the vehicle manufacturer’s warranty. Go straight to the next level with powerful, sensitive and faithful acoustics. These speakers are manufactured to match the acoustic contour of your car’s interior, therefore you can expect true hi-fi sound while keeping the vehicle looking unmodified. IC RNS 165 Key Features: Renault, Nissan, Smart-specific 2-way composystem Original parts remain undamaged (100% retrofittable) Bass-midrange driver with polyglass cone Tweeter with inverse aluminum dome

IC FORD 165 2-Way Coaxial Kit The IC FORD 165 2-way coaxial kit is designed for all drivers who wish to install a quality sound solution in their vehicle. The speaker drivers feature Polyglass technology, which delivers well-defined midrange and bass, and the Aluminium inverted dome tweeter, a Focal technology that provides perfect treble reproduction. Installing this kit does not require any soldering, cable trimming or vehicle modification. The integration is also invisible.

FOCAL TOYOTA SPECIFIC SPEAKERS FOR PERFECT INTEGRATION IS TOY 690 is a two-way component kit with a 6×9’’woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota® models. Reliable, neutral and powerful, the compactness and the ergonomics of the IS TOY 690 makes it easy to integrate thanks to the factory connectors. IS TOY 690 Features Respect of the original Toyota® connectors Better precision in high frequencies Compact tweeter for better adaptation in factory location High-density rubber ring for acoustic sealing with the door panel This kit can be installed in the following car models: Prius Camry Tacoma Tundra FJ Cruiser

FOCAL TOYOTA SPECIFIC SPEAKERS FOR PERFECT INTEGRATION IS TOY 165 is a two-way component kit with a 6½” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota® models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IS TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. IS TOY 165 Features Respect of the original Toyota® connectors Better precision in high frequencies Compact tweeter for better adaptation in factory location High-density rubber ring for acoustic sealing with the door panel

FOCAL TOYOTA SPECIFIC SPEAKERS FOR PERFECT INTEGRATION IC TOY 165 is a two-way coaxial kit with a 6½” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota® models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IC TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. IC TOY 165 Features Respect of the original Toyota® connectors Better precision in high frequencies High-density rubber ring for acoustic sealing with the door panel This kit can be installed in the following car models: Corolla Yaris Rav4

ISBMW100L, ICBMW100L, ISUBBMW2 (qty2), Impulse 4.320, harness IW-BMW-IMP2.1, harness IW-PWSUP600