Car Audio Accessories

ALPINE 6-1/2" 2-WAY WHITE COAXIAL MARINE SPEAKERS (WHITE)-SPS-M601W The new SPS-M601W White 6.5” Type-S 2-Way Coaxial speakers allow you to enjoy the premium and powerful sound Alpine is renowned for, out on the open water. Specifically designed for both fresh and saltwater environments, these IPx5 water-resistant speakers are ready to cut through the wind, waves and motor noise as soon as you are. 7/8” Titanium/PEI balanced-dome tweeters deliver accurate and crisp high-frequency detail whilst the accompanying super-stiff 6.5” poly woofers handle the mid-range frequencies. On the exterior these innovative Marine specific speakers represent the highest in environmental resistance. Their sleek non-resonant, high-strength, UV-resistant grilles protect from yellowing; whilst their high-temperature ABS custom frames provide more than enough strength for any kind of mounting required. Santoprene® rubber surrounds offer high fidelity and frequency response performance whilst still providing excellent resistance against moisture, oil, heat and chemicals. Furthermore they’re tested against fog, salt and blazing sunlight so you can be sure they’ll sound great for many seasons to come. For added convenience, included is a marine grade connection loom for a more robust installation. Features Crossover Network Crossover Type: Built-in Tweeter Protection Woofer Frame: High Temp ABS Frame Cone Material: Poly-Mica Woofer Cone Grill Cover Type: Ultra UV (Centrix® 813) Resistant Grill Tweeter Magnet Material: Neodymium Magnet Application Type / Design Detail: Internal / Fixed Tweeter Tweeter Type: Titanium/PEI Balanced Dome Tweeter Specifications General Sensitivity: 89dB / W(1m) Impedance: 4 Ω Frequency Response: 50Hz – 20khz Dimensions Woofer Mounting Depth: 2-27/32” Woofer Mounting Depth: 72.1mm Woofer Mounting Diameter: 5” Woofer Mounting Diameter: 127mm Woofer Diameter: 6-1/2” Woofer Diameter: 165.1mm Power Handling Power Handling Capacity (Peak): 100 Watts Power Handling Capacity (RMS): 30 Watts CEA-2031 Power Rating: 30 Watts

ALPINE DM-SERIES 50RMS COAXIAL SPEAKER ( NO GRILLES ) -DM-65 Introducing the Alpine M-Series, a car audio system that speaks volumes through its outstanding performance at an incredible price. Engineered using Alpine’s innovative “trickle-down” technology, the M-Series is crafted for budget-conscious music lovers who refuse to compromise on sound quality. Created for connoisseurs of authentic audio excellence, the M-Series focuses on delivering exceptional sound within a bold, stealth aesthetic design. With the incorporation of Alpine’s renowned H.A.M.R. Surround and a polypropylene cone, these speakers bring your favourite tracks to life with unmatched clarity and precision. Experience music like never before as the M-Series unveils subtle nuances you might have missed. Say goodbye to distorted bass and muddled lyrics – M-Series will ensure every note is crisp, and every beat is just right. Installation is a breeze, thanks to hassle-free, straightforward instructions that won’t leave you feeling overwhelmed. In no time, your car can be transformed into a mobile concert hall, ready to provide a genuine audio experience that moves you to the core. Experience the extraordinary with the M-Series. This remarkable car audio system doesn’t just meet your expectations; it exceeds them, offering unparalleled, high-quality sound that brings your music to life. If you desire a genuine and reliable car audio solution, look no further than the Alpine M-Series. Elevate your driving experience with Alpine M-Series – where affordability meets exceptional sound. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Large Magnet Structure The large strontium magnets housed on the back of M-Series speakers mean business. With large voice coils and Alpine’s patented HAMR Surround, they work together to enhance cone excursion and driver force, delivering louder and punchier bass. PP Woofer Cone The polypropylene (PP) woofer cone is light weight and provides excellent audio response with excellent power efficiency. This makes the DM-65 the perfect solution for those who desire great sounding audio without the expense and complication of a high-power system. Integrated Soft Dome Tweeter The integrated 1″ Soft Dome Tweeters allow your music to come alive! Playing upper harmonics climbing up to 20kHz, these beautifully soft yet remarkably detailed tweeters bring the studio to the dashboard with an honourable level of nuance and authenticity. Complete System Family Embrace the essence of a complete system family designed to integrate into virtually any vehicle or configuration. With perfect power matching and synergy, the PXE-M60-4 utilises intelligent matrix input summing and provides RCA pre-outs for connection to the PWE-M770 subwoofer or an alternate subwoofer system. The M-Series system combines compact power amplification with advanced sound processing, high-quality speakers and an 7-inch subwoofer that delivers unrivalled power and performance at a modest price.\ Features Woofer 6.5″ (165mm) Component Speaker HAMR (High Amplitude Multi-Roll) Surround Magnet Material: Strontium Ferrite Tweeter 1″ Soft Dome Magnet Material: Neodymium Specifications Power Handling Peak Power: 200 Watts RMS Power: 50 Watts General Frequency Range: 65 Hz – 20 kHz Impedance: 4 Ohms Sensitivity: 88 dB

ALPINE DM-SERIES 50RMS COMPONENT SPEAKER ( NO GRILLES ) -DM-65C Introducing the Alpine M-Series, a car audio system that speaks volumes through its outstanding performance at an incredible price. Engineered using Alpine’s innovative “trickle-down” technology, the M-Series is crafted for budget-conscious music lovers who refuse to compromise on sound quality. Created for connoisseurs of authentic audio excellence, the M-Series focuses on delivering exceptional sound within a bold, stealth aesthetic design. With the incorporation of Alpine’s renowned H.A.M.R. Surround and a polypropylene cone, these speakers bring your favourite tracks to life with unmatched clarity and precision. Experience music like never before as the M-Series unveils subtle nuances you might have missed. Say goodbye to distorted bass and muddled lyrics – M-Series will ensure every note is crisp, and every beat is just right. Installation is a breeze, thanks to hassle-free, straightforward instructions that won’t leave you feeling overwhelmed. In no time, your car can be transformed into a mobile concert hall, ready to provide a genuine audio experience that moves you to the core. Experience the extraordinary with the M-Series. This remarkable car audio system doesn’t just meet your expectations; it exceeds them, offering unparalleled, high-quality sound that brings your music to life. If you desire a genuine and reliable car audio solution, look no further than the Alpine M-Series. Elevate your driving experience with Alpine M-Series – where affordability meets exceptional sound. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Large Magnet Structure The large strontium magnets housed on the back of M-Series speakers mean business. With large voice coils and Alpine’s patented HAMR Surround, they work together to enhance cone excursion and driver force, delivering louder and punchier bass. PP Woofer / Integrated Wave Guide  The polypropylene (PP) woofer cone is light weight and provides excellent audio response with excellent power efficiency. Moreover, the component speakers are equipped with an integrated wave guide to ensure uniform sound dispersion and optimised sound imaging. The DM-65C creates a perfect solution for those who desire great sounding audio without the expense and complication of a high-power system. Versatile Tweeter Installation The 1” Soft Dome Tweeters cater to a wide-array of installation methods. They can be flush mounted and rotated within the housing to find the exact axis sweet spot. For stealth applications the frames can be removed to reduce down to a fraction of their original size for easy replacement of factory fitted OEM tweeters. Complete System Family Embrace the essence of a complete system family designed to integrate into virtually any vehicle or configuration. With perfect power matching and synergy, the PXE-M60-4 utilises intelligent matrix input summing and provides RCA pre-outs for connection to the PWE-M770 subwoofer or an alternate subwoofer system. The M-Series system combines compact power amplification with advanced sound processing, high-quality speakers and an 7-inch subwoofer that delivers unrivalled power and performance at a modest price. Features Woofer 6.5″ (165mm) Coaxial Speaker HAMR (High Amplitude Multi-Roll) Surround Magnet Material: Strontium Ferrite Tweeter 1″ Soft Dome Magnet Material: Neodymium Application Type: External/Tweeter Mounting Kit Flush mount and Collapsable for OEM fit. Specifications Power Handling Peak Power: 200 Watts RMS Power: 50 Watts General Frequency Range: 65 Hz – 20 kHz Impedance: 4 Ohms Sensitivity: 88 dB

The weather-resistant HCE-C2600FD will help you steer away from obstacles in front of and on the sides of your vehicle, even in the off-road elements. HDR (High Dynamic Range) technology enhances detail in light and dark conditions Selectable 3 View Modes (Panorama/Corner/Ground) with select Alpine head units via Direct Connection and Multi-Camera Selector 180 degree horizontal, 125 degree vertical viewing angles Automatic exposure and white balance adjustment Universal Mounting Bracket and 10ft Waterproof Direct Extension Cable Included Compatible with Multi-Camera Selector (KCX-C250MC or KCX-C2600B sold separately) Compatible with License Plate Camera Mounting Kit (KTX-C10LP sold separately) Tech Specs Wide Illumination Range (1.5 to 100,000 Lux) 1/4 inch CMOS Image Sensor (1280 x 960, 1.2M pixels) IP 68 Water and Dust-proo

Alpine KTE-RS12G Grille for 12" RS-W12D4 and RS-W12D2 subwoofers Alpine's KTE-RS12G subwoofer grille protects your 12" RS-W12D4 and RS-W12D2 sub against damage in your trunk or cargo area. The metal mesh grille features a matte black powder-coated finish that adds a clean, professional look to your installation. Simply remove the screws holding the subwoofer in place, place the grille's mounting tabs over the screw holes, and remount the sub with the screws. An Alpine badge and a textured rubber screw cover add the finishing touches. Warranty: 1 year. What's in the box: Alpine KTE-RS12G owner's manual Other info: MFR # KTE-RS12G Item # 500KTERS12

Features Optional harness for the BMW E46 Required for vehicles that have the original radio black-box installed in the boot Provides all the necessary connections for perfect integration

The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors. Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles CAN-bus interface for latest generation of vehicles Display of air condition / heater settings on Alpine screen Steering wheel remote control retention Support of Multi-Function Display (MFD) in instrument cluster Parking sensor display and rear camera connectivity Pre-flight Check for Camper Vans Original hands-free microphone adaptation Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:1. OEM, for an easy and correct factory placement2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations3. Spoke grille: for maximum acoustic performance with a-pillar installationsThanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:1. Watch band2. Double-angle cup3. Flush Mounting Ring4. Metal mounting springTechnical SpecificationsSize: 29 mm (1.14″)Power Handling: Hi-pass filtered 2.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance: 8 ΩFrequency Response: 1,2 ÷ 25 kHzCrossover name: APCX P 2TCrossover Type: High Pass, 4kHz, 12 dB/oct.Crossover adjustment: Tweeter Level: 0 / +3 dBSensitivity: 92 dB/SplMagnet: NeodymiumTweeter Voice Coil Ø: 25 mm (1″)Dome: Tetolon fibre

The Audison Bit Ten is a versatile and high-performance digital signal processor designed to enhance and optimize your vehicle's audio system, transforming any setup into a high-quality sound system. Thanks to its ability to manage and process audio signals with precision and detail, the Bit Ten allows you to achieve a balanced and faithful sound, perfectly adapted to the acoustic characteristics of the cabin. This device allows you to connect original or aftermarket audio sources, providing complete control over every aspect of the sound through an intuitive and advanced user interface. The Bit Ten offers the ability to adjust equalization parameters, crossover filters, and time delay management, allowing for sound optimization according to the specific needs of the user and the vehicle. Installing the Bit Ten is simple and flexible, designed to easily integrate with a wide range of car audio systems, whether existing or new. Thanks to its compact size and versatility, the Bit Ten can be installed in various locations within the cabin without taking up excessive space. The Bit Ten stands out for its ability to significantly improve the audio quality of the vehicle's system, turning every trip into a superior listening experience. This digital processor is the ideal choice for those who want to customize and perfect their audio system, ensuring clear, powerful, and high-fidelity sound in any situation.   DSP Tech Data Nominal power supply voltage / Fuse 11 ÷ 15 VDC Channels 5 Sample Rate 24 bit / 48 kHz Hi Level Inputs 4 Low Level Inputs 4 Digital Inputs 0 Processing Method Fixed point Idling current 0.4 A Switched off without DRC MP 2.5 mA Switched off with DRC MP 4 mA Remote IN 7 ÷ 15 VDC (1.3 mA) Remote OUT 12 VDC (130 mA) Signal Stage Distortion - THD @ 1 kHz, 1 VRMS Output 0.005 % Bandwidth @ -3 dB 10 ÷ 22k Hz S/N ratio @ A weighted, 4 V Output, 2 V MASTER input 96 dBA S/N ratio @ A weighted, 4 V Output, OPTICAL IN1/IN2 input 95 dBA Channel Separation @ 1 kHz 85 dB Input sensitivity AUX 0.6 ÷ 5 V RMS Input impedance Pre In 15 kΩ Input impedance Speaker In / AUX 2,2 kΩ Max Output Level 0.1% THD 4 V RMS Input Stage Low level (Pre) AUX IN High Level (Speaker In) FL - FR - RL - RR - PHONE IN Output Stage Low level (Pre) FRONT L/R, REAR L/R, SUB Connection From / To Personal Computer 1 x USB / B (1.1/2.0) Crossover Filter type Full / High Pass/ Low Pass/ Band Pass Filter mode and slope Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB Crossover Frequency 68 steps @ 20 ÷20k Hz Phase control 0° ÷ 180° Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 in. Delay 0 ÷ 15 ms Step 0,08 ms; 2,8 cm / 1.1 in.

Audison Bit Nove DRC Signal Interface Processor with 6 Channels In and 9 Channels Out with 2 Optical Inputs works with Maestro AR with DRC AB Remote Included bit Nove is a powerhouse of technology fully dedicated to listening pleasure: since 2007, the year in which the bit One was first introduced, Audison has never stopped delivering innovation to the digital processors segment. The bit Nove was born from this unique know-how within the industry, the perfect tool to expand a car audio system maximizing its performance.   POWER SUPPLY Voltage: 10.8 ÷ 15 VDC Operating power supply voltage: 7.5 ÷ 14.4 VDC Idling current: 0.53 A Switched off without DRC: 1 mA Switched off with DRC: 4.5 mA Remote IN voltage:4 ÷ 15 VDC (1mA) Remote OUT voltage: 10 ÷ 15 VDC (130 mA) ART (Automatic Remote Turn ON): 2 ÷ 7 VDC SIGNAL STAGE Distortion - THD @ 1 kHz, 1 VRMS Output: 0.005% Bandwidth @ -3 dB: 10 Hz ÷ 22 kHz S/N ratio @ A weighted Master Input: 102 dBA AUX Input: 101.5 dBA OPTICAL IN1 / IN2 Inputs: 110 dBA Channel Separation @ 1 kHz: 85 dBA Input sensitivity Pre Master: 1.2 ÷ 8 VRMS Input sensitivity Speaker Master: 3 ÷ 20 VRMS Input sensitivity AUX Master: 0.3 ÷ 5 VRMS Input impedance Pre In / Speaker In / AUX: 15 kΩ / 12 Ω / 15 kΩ Max Output Level (RMS) @ 0.1% THD: 4 V INPUT STAGE Low level (Pre): Ch1 ÷ Ch6; AUX L/R High Level (Speaker In): Ch1 ÷ Ch6 Digital: 2 x Optical S/PDIF; Max 192 kHz / 24 bit OUTPUT STAGE Low level (Pre): Ch1 ÷ Ch9 CONNECTION From / To Personal Computer: 1 x Micro USB To Audison DRC AB / DRC MP: 1 x AC Link Optical 2 sel: Optical In 2 wire control +12 V enable Mem D sel: Memory D wire control GND enable CROSSOVER Filter type: Full / Hi pass / Low Pass / Band Pass Filter mode and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB Crossover Frequency: 68 steps @ 20 ÷ 20k Hz Phase control: 0° / 180° EQUALIZER (20 ÷ 20K Hz) Analog Input: Equalizer Automatic De-Equalization Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz TIME ALIGNMENT Distance: 0 ÷ 510 cm / 0 ÷ 200.8 inches Delay: 0 ÷ 15 ms Step: 0,08 ms; 2,8 cm / 1.1 inch Fine: SET 0,02 ms; 0,7 cm / 0.27 inch GENERAL REQUIREMENTS PC connections: USB 1.1 / 2.0 / 3.0 Compatible Software/PC requirements: Microsoft Windows (32/64 bit): Vista, Windows 7, Windows 8, Windows 10 Video Resolution with screen resize: min. 1024 x 600 Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F) SIZE W (Width) x H (Height) x D (Depth) mm/inch: 130 x 34.5 x 199 / 5.11” x 1.35” x 7.83”

ES3 - BIT ENERGY STORAGE START & STOPIt prevents the processor from shutting down when turning on vehicles featuring the start & stop system. When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If an Audison bit processor is installed in your system, especially with vehicles featuring the start & stop system, low supply voltage values might make the processor shut down. In order to avoid waiting for the processor to complete its turn-on cycle again, you can install the ES3 by connecting it in series to the processor power supply cables.  

The Audison DRC AB is a sophisticated remote control unit designed to enhance your vehicle's audio experience. This advanced device allows you to manage and customize your car's audio system with precision and ease. The DRC AB features an intuitive interface that lets you control all key audio functions, such as volume, sound sources, and equalizer settings, directly from the dashboard. The unit's sleek and compact design makes it easy to integrate into the vehicle's dashboard without compromising the interior's aesthetics. The clear, easy-to-read display provides real-time information about audio settings, ensuring immediate control and minimal distraction while driving. One of the main features of the DRC AB is its ability to manage and save custom presets. This allows users to store their preferred audio settings and access them quickly, facilitating adjustments to different musical styles and driving conditions. Additionally, the DRC AB supports managing multiple audio zones, making it ideal for vehicles with complex audio setups or multiple amplifiers. This functionality enables independent sound control in different areas of the vehicle, providing an optimal audio experience for all passengers. Installation of the DRC AB is straightforward and quick, thanks to its compatibility with a wide range of Audison processors and interfaces. This device offers a versatile and powerful solution for car audio enthusiasts seeking precise and customizable control of their audio system. In summary, the Audison DRC AB is the perfect choice for those who want advanced and intuitive control of their audio system, significantly enhancing the listening experience while driving.   Features Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Main, Aux 1,Digital Optical 1 2). Audison bit Nove memories selection.

Adjust master volume, tweak subwoofer level, switch sources, and recall DSP presets in seconds. Designed for a seamless OEM-style fit, it blends perfectly into any interior while RGB LED indicators keep everything clear, day or night. With a single cable for power and control, installation is fast and clean. Fully compatible with a wide range of Audison processors, the DRC AC is your perfect interface for precision sound with a touch of style. Features • RGB LED Feedback: colored LEDs show volume position and active functions, making control simple and intuitive. • Software Programmable Functions: use bit Drive software to assign up to 5 custom functions, each with its own LED color. • Compatible with DSPs featuring CANBUS: works with Audison DSPs equipped with CANBUS communication via the DRCC port. • Compact and Easy to Install:  choose surface or flush mounting to match your vehicle’s style. • One Cable, Zero Hassle: a single DRCC cable handles both power and control for fast and clean installation. • Automatic LED Sleep Mode: LEDs dim after 5 seconds of inactivity for a minimal and elegant dashboard. • Updatable Firmware: stay current with simple PC firmware updates for future enhancements.

Audison DRC MP CAN is the new high-end remote controller designed for Forza bit DSP amplifiers and future Audison devices with a DRCC port. The white OLED display ensures excellent visibility under all cabin lighting conditions, with a 160-degree viewing angle. The RGB LED backlit keyboard seamlessly integrates with the car’s dashboard. When audio streaming from the B-CON is active, the main fast forward (FFW) and rewind (RRW) controls will be available on the DRC MP CAN display. The joystick allows for easy navigation of the menu, providing quick access to main functions such as master volume, subwoofer volume, mute, and more. This controller offers perfect integration with the B-CON and B-CON go app, allowing full control of audio streaming when the B-CON is present. The master volume can be managed both from the DRC MP CAN and the mobile device, with real-time synchronization with the app. The device allows for the selection of up to six DSP memories, offering maximum flexibility for any audio needs. Additionally, the Audison DRC MP CAN enables the activation and deactivation of the Final EQ and manages the different zones configured in the bit Drive software. The provided cable features the same terminations as the DRC AC, ensuring a quick and straightforward connection. Features Broad Compatibility: Specifically designed to work with Audison Forza series amplifiers and any new Audison products equipped with the CAN BUS protocol. Advanced Integration: Works flawlessly with the B-CON and B-CON go. App, enabling: Audio streaming control when paired with a B-CON. Master volume control: Via both the DRC MP CAN and your mobile device. Real-time synchronization: With the B-CON go App for on-the-fly adjustments. Versatile Memory Selection: Offers up to six DSP memory selections, allowing you to tailor the sound to your preference or driving scenario. Sophisticated Design: Features an RGB LED backlit keyboard that blends seamlessly with your car’s dashboard aesthetics. Comprehensive Control: Navigate through the menu with an intuitive joystick, providing quick access to essential functions like Master Volume, Sub Volume, Mute, and more. Enhanced Visibility: The white OLED display boasts a wide viewing angle of 160 degrees, ensuring clear visibility under any cabin lighting conditions. Custom Zone Management: Allows for managing different zones configured in the bit Drive SW. EQ Control: Easy activation and deactivation of the Final EQ for perfect sound tuning.

Audison DRC MP is an advanced remote control designed to offer a wide range of customization and management options for high-quality audio systems installed in vehicles. This device is essential for those seeking precise and versatile control of their audio system, providing intuitive and convenient management directly from the vehicle's dashboard. The DRC MP (Digital Remote Control Multi-Processor) has been developed to work in synergy with Audison Bit series processors, allowing users to easily modify and adjust various audio parameters. With its ergonomic design and robust construction, the DRC MP integrates seamlessly into the car dashboard, offering immediate access to main functions such as volume, source selection, and equalization. The device features an intuitive user interface and a clear display that shows all the necessary information for effective control. Adjustments can be made in real time, allowing you to tailor the sound to personal preferences and varying listening conditions. The ability to save and recall custom presets makes the DRC MP extremely versatile, suitable for different musical styles and driving situations. Additionally, the DRC MP supports the management of multiple audio zones, allowing independent control of sound in different areas of the vehicle. This is particularly useful for vehicles with complex audio systems or multi-amplifier setups. The ease of installation and compatibility with various Audison processors make it a valuable addition for any car audio enthusiast. In summary, the Audison DRC MP is a high-quality remote control that provides users with detailed and flexible control over their audio system, enhancing the listening experience with simple and intuitive management directly from the vehicle. Features Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Aux 1, Aux 2,Digital Electric, Digital Optical). DRC Settings:Keybord color, Keybord brightness, Display brightness, Discreet screen, Mainscreen logo (through the DRC MP joystick). DSP Memory:Audison compatible products memories selection. DSP Settings:Dynamic EQ, Bass Boost, AutoIN Level Adj.Player Menu:bit Play HD off delay. Navi Command:navigation of bit Play HD (through the DRC MP joystick). Available only with compatible Audison products connected Available only with bit Play HD connected

RCA connector for effortless and fast connections between the head unit PRE OUTs (2 V min.) and bit Ten, bit Ten D Hi-Level inputs.

Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response.

Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition. In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no. 10/5

The Bit DMI is a high-quality digital interface designed to connect the original digital sources of a vehicle with Audison signal processors, ensuring a signal transmission free from disturbances and without loss of quality. This device allows you to maintain the original functionalities of the vehicle's audio system while integrating high-end audio solutions for a superior listening experience. The Bit DMI is compatible with the digital systems of major automotive manufacturers, thanks to its ability to convert native digital signals into signals compatible with signal processors. This ensures a faithful audio reproduction, preserving the integrity of the original sound and enhancing its quality through the advanced signal management provided by Audison processors. Installing the Bit DMI is simple and non-invasive, designed to integrate perfectly with the vehicle's onboard electronics without compromising the original functionalities of the system. Moreover, its compact and discreet design allows for flexible installation in different types of vehicles, without requiring substantial modifications. In summary, the Bit DMI is an ideal solution for those who want to enhance their vehicle's audio performance while maintaining compatibility with the original systems, ensuring excellent sound quality and perfect integration with the existing instrumentation.   Features MOST optical input The Audison bit DMI connects via optical fiber to the OEM multimedia system. S/PDIF optical output to transfer audio data in Stereo PCM 16bit format, 44.1kHz/48kHz (depending on the system) for use with Audison products with digital input. Digital controls USB/mini B (2.0) for connection to your PC. Configuration via USB and the appropriate software, the Audison bit DMI can be programmed and updated to work with vehicles equipped with MOST technology. Start controls: the bitDMI switches on and off automatically upon activation or deactivation of the car’s MOST system and generates the Remote Out signal to turn on your amplifier Integration with the OEM source Volume, balance and tone controls are kept intact as well as service signals of the car audio system, such as the handsfree calls, navigator and parking sensors. bit DMI software Windows-based (Win2000, XP, Vista, Windows 7, Windows 8).

The Audison AFM/AFC CLK accessories have been specially developed for the Audison Forza Max/Compact amplifier series.It consists of a metal bracket with airflow slots and a cooling fan, designed for quick installation on the Audison Forza Max/Compact amplifiers.AFM/AFC CLK is highly recommended when installing the amplifier in very tight spaces with limited airflow to ensure optimal performance and durability in difficult conditions. Features: Compact Design: The robust metal housing of the AFM/AFC CLK fits perfectly into the Forza heatsink and ensures optimal airflow through strategically placed slots.  Quick Installation: The mounting is done via plastic nuts without any additional measures, so AFM/AFC CLK can be easily can be integrated into existing installations. The power harness with remote input prevents unwanted current draw when the system is turned off. Efficient cooling: AFM/AFC CLK is equipped with a low-noise and fast cooling fan. The built-in electronics monitors the heatsink temperature in real time via the integrated sensor, activates the fan at a certain threshold and controls its speed according to the power/heat dynamics. This ensures efficient operation and extends the life of the amplifier by preventing overheating.  

Audison F2O - OPTICAL FORZA EXTENSION Accessories | Forza expansion board The F2O accessory is a digital input expansion card compatible with the new range of Audison AF bit amplifiers with integrated Dsp. The card fits into the designated external slot of the AF bit amplifier and adds an additional coaxial Add S/PDIF or a second Toslink S/PDIF input. The type of additional input can be selected using a switch on the card itself. If the coaxial S/PDIF input is selected, the coaxial input cable included in the card box can be used.

F4IN features 3.2 ÷ 32 VRMS to allow perfect integration into advanced higher voltage OEM systems. F4IN is compatible with: Audi A5/S5 2015 with B&O for subwoofer Audi Q5 with B&O for subwoofer Audi A6 4G with Bose for subwoofer Most BMWs are equipped with an H/K system for the subwoofer Porsche Cayenne 2018 with Bose for subwoofer Skoda Octavia 2022 with Canton for subwoofer Volvo FH12 with OEM subwoofer DVC 8+8 Ohm COMPATIBLE PRODUCTS AF M12,14bit  AF M8.14 bit  AF C8.14 bit  AF M5.11 Bit  AF C4 .10 bit 

Accessories | Plug&Play T-Harness to install Audison AF bit on BMW | Compatible with BMW “Standard” or “Hi-Fi” 676 system and BMW 688 Harman/Kardon This Plug&Play T-Harness allows to install an Audison AF bit amplifier on BMW vehicles equipped with RAM modules. It is compatible with "Standard" and "HI-FI" 676 sound systems (It is also compatible with 688 HK-branded systems, but only delivers 7 of the 9 channels required). This harness delivers the 7 speaker-level outputs of the RAM to the inputs of your AF amplifier and also provides speaker leads for front, rear, underseat woofer, and center - so you can configure your AF amplifier as desired. NOTE: not compatible with AP BMW ASD BYPASS – Active Sound “artificial exhaust note” defeat requires vehicle coding.

The Audison B-CON is an advanced Bluetooth 5.0 receiver specifically designed for automotive use, which has obtained the "Hi-Res Audio Wireless" certification from the Japan Audio Society. This device is the ideal choice for those seeking high-quality audio streaming from Hi-Res players such as Fioo or Sony Walkman, as well as from the latest Android and Apple smartphones. The B-CON is compatible with all audio formats and delivers maximum performance with uncompressed Bluetooth streaming (up to 96 kHz / 24 bit), available only on Android devices compatible with the LDAC codec. This allows for superior sound quality when playing local audio files or using streaming services like Tidal and Qobuz. The device integrates RCA analog outputs and Toslink optical digital outputs, offering versatile connections to high-quality audio systems. With the implementation of the LDAC codec, the B-CON ensures a frequency response up to 40 kHz, providing an immersive and faithful listening experience. Additionally, the B-CON supports handsfree call management and features "Absolute Volume" to preserve the dynamic range of the audio signal, preventing quality loss during volume adjustments. In summary, the Audison B-CON is an essential accessory for car audio enthusiasts seeking a superior listening experience without compromising sound quality.   Receiver Tech Data Power Supply Voltage 6 ÷ 24 VDC Idling Current 70 mA Remote IN 3 ÷ 12 VDC (0.5 mA) Bluetooth Data Type: Bluetooth 5.0 + EDRCodec: LDAC, AAC, SBCProfile: Bluetooth A2DP 1.3, AVRCP 1.6 Digital Input Optical: S/PDIF Optical (Max 24 bit/192 kHz) Digital Output Optical: S/PDIF Optical (Max 24 bit/192 kHz) Analog Output Performance Bandwidth (Max) 20 ÷ 48k HzOutput Level 2 VRMSDistortion – THD @1 kHz, 1 VRMS 0.003%S/N RATIO (A weighted) 100 dBA   Features Up to 96 kHz / 24-bit BT streaming LDAC codec compatibility for Android devices ACC codec compatibility for iOS devices Automatic handsfree call manage Absolute volume function, to ensure a full dynamic range audio signal Digital output Analog RCA outputs Digital optical input with pass-through capability to the Digital output (no DA/AD signal conversion) Additional micro-USB power plug for non-automotive use

The Audison APBXKIT makes it easy to connect and power compatible Audison subwoofer enclosures. Designed for a clean and reliable installation, it ensures your subwoofer performs at its best without unnecessary hassle. Built with quality materials for lasting durability, this kit is ideal for achieving a secure, efficient setup. Check compatibility with your subwoofer before purchase and have it installed by us or a qualified technician for optimal results.

Audison AP 260P&P I/O - ISO EXTENSION IN/OUT 260CM/102IN CONNECTION CABL

The Audison C2O is a high–precision interface designed to convert both coaxial digital and analog AUX signals into a TOSLINK optical digital output. Supporting resolutions up to 24-bit / 192 kHz, the C2O ensures perfect integration between modern Hi-Res portable players, smartphones, and Audison processors equipped with an optical digital input. Thanks to its ultra-compact design, the C2O can be easily installed in hidden or tight spaces inside the vehicle, minimizing cable length and eliminating noise issues often caused by long signal paths. The C2O is the ideal solution for integrating Hi-Res audio sources into advanced Audison ecosystems, guaranteeing signal integrity, perfect compatibility, and a streamlined installation experience. Its intelligent design and premium components make it indispensable for achieving the highest sound quality in modern car audio systems Dual Input Conversion: Converts digital coax (75 Ω) and analog AUX (3.5 mm jack, including 4-pole types) into a high-quality TOSLINK optical output. High-Resolution Digital Output: From analog input: 24-bit / 48 kHz From coaxial digital input: 24-bit / 192 kHz Smart Input Management: Automatic input selection with priority to the AUX input. If no analog signal is detected, the device switches to the coaxial input after 6 seconds (adjustable to 9 or 12 seconds via internal switch). Noise-Free Signal Handling: The coaxial digital input features an isolation transformer to minimize electromagnetic interference (EMI), ensuring clean and stable signal transmission. Optimized Analog Input Stage: Integrated pre-amplifier with adjustable gain (0.1V to 2V) for perfect matching with various devices before high-quality A/D conversion. Flexible Power Supply Options: Operates from 6 to 30 VDC, with support for both classic remote turn-on and +12V REM trigger.

This Plug&Play harness allows the replacement of the OEM BMW amplifier with an Audison AP bit or AF bit amplifier on BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options and on BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system. The OEM seven-channel analog amplifier is connected via a forty-two-pin multipolar connector.   Features Compatible with BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options Compatible with BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system Compatible with Audison AF bit amplifier. The use of other products may require modifications and additional connections to the vehicle Compatible with AP F8.9 bit. The AP F IN ADP adapter is required for full P&P connection. Confirm proper application: APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable NOTE: AP BMW ASD BYPASS may also be required in vehicles that have the optional ASD “artificial exhaust sound” feature. Not compatible with current RAM-equipped BMW models using AFBMW ReAMP3, or with MOST-equipped 677/688 systems.

Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.

PRIMA T-HARNESS BMW T-Harness “DCC” is the Plug&Play solution for BMW to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution. *The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system. Features Designed specifically for your vehicle For maximum OEM integration. Connection to the AP Extension cable through ISO connectors Possibility to supply power to the amplifier via the direct cockpit current system Without the need of routing the cable through the engine compartment (with Audison Prima DCC solution). ACC wire to re-launch ignition key signal to turn on / off an external device* *In those vehicles featuring ignition key connection wire (ACC wire), see compatibility list

This Plug&Play T-Harness provides the ability to install an Audison AP F on BMW vehicles equipped with RAM module. It’s compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector. Features Retrieve the OEM source front and rear stereo audio signal. Route the AP FORZA amp outputs to each of the OEMamplifier seven channels:(Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)The Plug&Play terminals enable the user to choose whichAP FORZA amplifier output to connect to each of the sevenchannels of the OEM audio system.It is also possible to bridge the outputs of the AP FORZAamplifier. Keep the OEM amplifier on. The USS1 prevent the speaker diagnostic error of the centerchannel.

APTK 3 - AUDISON PRIMA TOWER KIT 3With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating. *Does not include Amplifiers*

THG 1.5 II optional mesh grilles dedicated to TH 1.5 Violino can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.

THG 3.0 II optional mesh grilles can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.

THG 6.5 II optional mesh grilles can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute. Dimensions Dimension A 171.2 mm Dimension B 24.5 mm Dimension C 12 mm

The Audison AVG 6.5 B II mesh grille is designed to blend seamlessly into any vehicle interior with its sleek, black finish, adding a touch of sophisticated subtlety. Constructed from durable materials, it offers robust protection for the AV 6.5 P II woofers, shielding them from physical damage and environmental factors. This grille is engineered specifically for a perfect fit with the AV 6.5 P II, ensuring flawless integration and enhancing the overall aesthetic of your audio setup.

The Audison AVG 6.5 S II grille combines modern aesthetics with robust protection, featuring a striking silver finish that adds a contemporary edge to your vehicle’s design. This grille is specifically engineered to protect the AV 6.5 P II woofers from debris and impacts, ensuring sound transparency is maintained. Tailored for the AV 6.5 P II speakers, it guarantees easy installation and seamless integration within the vehicle’s interior, enhancing both the style and quality of your car audio system. Features Modern Aesthetics: Features a striking silver finish that adds a contemporary edge to your car’s design, standing out in both style and quality. Protective Design: Made to protect the AV 6.5 P II woofers from debris and impacts while maintaining excellent sound transparency. Tailored Integration: Precisely designed for the AV 6.5 P II speakers, ensuring easy installation and a seamless look within the vehicle’s interior.

The Audison AVCX 3P is a three-way passive crossover meticulously engineered to facilitate bi-amplification and seamless integration within the Audison VOCE II series. This crossover is specifically designed to harmonize the performance of the AV 3.0 II midrange speaker with other VOCE II components, ensuring a coherent and balanced soundstage. The AVCX 3P’s design supports distinct amplification of the woofer, midrange, and tweeter, allowing for precise control over each frequency band. This setup is ideal for achieving the optimal blend of sound dynamics and clarity, tailored to the sophisticated setups demanded by modern car audio enthusiasts.

Audison AV CX 2W MB VOCE Series 2-Way Crossover - Tweeter + Woofer (Pair)Especially designed for the AV K5 and AV K6 two-way complete systems, shapes their acoustic response to achieve a consistent, harmonious sound in any vehicle, also offering the acoustic controls necessary to achieve the best balance according to one’s own taste.

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 6.5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

Focal 6.5" Utopia M Speaker Driver Grille - GRILLE6.5 Protect your premium Utopia M speakers while maintaining their exceptional acoustic performance with the Focal 6.5" Utopia M Speaker Driver Grille. Designed specifically for compatible Focal Utopia M 6.5-inch speaker applications, this premium grille combines elegant styling with durable protection, making it the perfect finishing touch for high-end custom audio installations. Manufactured using Focal's advanced chemical etching process and complemented by a precision CNC-milled aluminium ring, the grille reflects the distinctive design language of the Utopia M range. Its acoustically transparent construction helps protect the speaker driver from accidental damage without affecting sound quality, ensuring your system performs exactly as intended. Whether you're completing a custom installation or adding extra protection to an existing Utopia M setup, this grille provides a refined OEM-style appearance while preserving the premium aesthetics of your audio system. Key Features Designed specifically for Focal Utopia M 6.5" speaker drivers Developed and manufactured in France Premium protection for high-end speaker installations 100% chemical-etched grille construction CNC-milled aluminium trim ring Acoustically transparent design Maintains speaker performance and sound quality Complements the Utopia M design language Ideal for custom and OEM-style audio installations Sold individually Why Choose a Utopia M Speaker Grille? Premium speaker systems deserve premium protection. The Focal Utopia M grille helps safeguard your speaker investment while preserving the clean, sophisticated appearance expected from a flagship audio system. Its precision-engineered construction provides an ideal balance of durability, aesthetics, and acoustic transparency, allowing your speakers to perform at their best while remaining protected from everyday wear and accidental damage. Benefits Protects speaker cones from accidental damage Maintains optimal acoustic performance Enhances the appearance of custom audio installations Matches the premium aesthetics of the Utopia M range Durable aluminium construction Suitable for OEM-style and custom installations Specifications Product Type: Speaker Driver Grille Speaker Compatibility: Focal Utopia M 6.5" Speakers Construction: Chemical-Etched Metal Grille Trim Ring Material: CNC-Milled Aluminium Acoustic Design: Acoustically Transparent Installation Type: Speaker Protection Grille Country of Design: France Sold As: Individual Grille More Information Product Type Speaker Driver Grille Speaker Size Compatibility 6.5" (165mm) Series Compatibility Focal Utopia M Construction Method 100% Chemical Etching Trim Ring Material CNC-Milled Aluminium Acoustic Transparency Yes Installation Type Protective Speaker Grille Vehicle Compatibility Universal Custom Installations Country of Design France Sold As Individual Unit What's Included 1 x Focal 6.5" Utopia M Speaker Driver Grille CNC-Milled Aluminium Trim Ring Installation Components

Focal 8WM Utopia M 8" Speaker Driver Grille - 8WM GRILLE Designed specifically for Focal Utopia M 8-inch midrange speakers, the 8WM Grille combines premium protection with the distinctive styling of Focal's flagship Utopia M range. Engineered for seamless integration into high-end custom audio installations, this grille preserves speaker performance while adding a refined finishing touch to your vehicle's interior. Manufactured using a 100% chemical etching process and complemented by a precision aluminium trim ring, the 8WM Grille incorporates the unique "M" profile that defines the Utopia M series. The result is an elegant, acoustically transparent grille that protects your speaker while maintaining the exceptional sound quality expected from a premium Focal system. Whether you're completing a competition-grade audio build or a premium OEM-style installation, the 8WM Grille provides the ideal combination of protection, aesthetics, and acoustic performance. Key Features Designed specifically for Focal Utopia M 8-inch midrange speakers Premium speaker protection without compromising sound quality 100% chemical-etched grille construction Precision aluminium trim ring Distinctive Utopia M "M" profile design Acoustically transparent construction Seamless integration into custom installations Enhances the appearance of premium audio systems Developed to complement the Utopia M range Sold individually Why Choose the 8WM Grille? Premium audio components deserve premium protection. The 8WM Utopia M Grille helps safeguard your speaker investment while preserving the sophisticated aesthetics and acoustic integrity of your audio system. Its carefully engineered design allows sound to pass freely while protecting the speaker from accidental contact and damage, making it ideal for both show vehicles and daily-driven applications. Benefits Protects speaker cones from accidental damage Maintains optimal acoustic performance Matches the styling of the Utopia M range Creates a clean, professional installation finish Durable construction for long-term reliability Ideal for custom and OEM-style installations Specifications Product Type: Speaker Driver Grille Speaker Compatibility: Focal Utopia M 8" Midrange Speakers Construction: 100% Chemical-Etched Metal Grille Trim Ring Material: Aluminium Design Profile: Utopia M Signature "M" Profile Acoustic Transparency: Yes Installation Type: Protective Speaker Grille Sold As: Individual Grille More Information Product Type Speaker Driver Grille Speaker Size Compatibility 8" (200mm) Series Compatibility Focal Utopia M Construction Method 100% Chemical Etching Trim Ring Material Aluminium Design Profile Utopia M "M" Profile Acoustic Transparency Yes Installation Type Protective Speaker Grille Vehicle Compatibility Universal Custom Installations Sold As Individual Unit What's Included 1 x Focal 8WM Utopia M 8" Speaker Driver Grille Aluminium Trim Ring Installation Components

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

The Focal Inside I IW FORD Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Ford original car radio and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility : Ford vehicles from 2005 to 2021

FOCAL IW IMP EXT 150 "Y" ADAPTER CABLE FOR FOCAL IMPULSE 4.320 ISO STANDARD Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IW IMP EXT 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.   Developed with Twisted Cables to Effectively Eliminate Disturbance Three Different Lengths to Suit All Vehicles Cut-resistant Protective Shield Great Flexibility for the Easiest Possible Installation Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320 No Soldering Required Length: 5 ft (1.50m)   DESIGNED IN FRANCE For over 40 years, Focal has been designing and manufacturing free-standing and in-wall/in-ceiling loudspeakers for the home, Home Cinema systems, speaker drivers for cars, monitors for recording studios, open-back and closed-back Hi-Fi headphones, as well as audio solutions for boats and yachts. Based in Saint-Étienne in France, Focal has positioned itself as a global leader in its field, thanks to its constant commitment to new technologies and innovations.  

The Focal Inside I IW TOY Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original car radio and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility : Toyota vehicles from 2021

FOCAL INSIDE NISSAN Y-ISO HARNESS HEAD UNIT ADAPTATION CABLE The Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m)  Compatibility: for Nissan vehicles since 2008

The Focal Inside I IW MBZ Y-ISO HARNESS car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Mercedes original car radio and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility : E-class from 2016, S-class from 2013, C-class from 2014 until 2019

The Focal Inside head unit adaptation cable for RENAULT/DACIA Y-ISO HARNESS is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Renault/Dacia original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m) Compatibility: for Renault and Dacia vehicles since 2000 

FOCAL BAMXL Acoustic Absorption & Sound-dampening Material (Bulk Pack | 0.5mx2m) Honeycombed damping material Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and then increases the speaker performance. Aluminum sheet essential component to the sandwich effect realization. This process permits to increase the performance of the viscoelastic complex. Viscoelastic complex Self-adhesive, the butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car. Less noise means more music. Content: 50 x 200cm sheet