HERTZ Cento 26Mm (1") Tweeter - Pair (C26)
$134.99
C 26 tweeter features a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity.
Component
Tweeter
Size mm (in.)
26 (1)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20(0.8)
Frequency Response Hz
1.8k ÷ 22.5k
Magnet size D x d x h mm (in.)
19 x 0 x 3 (0.75 x 0 x 0.12)
Weight of one speaker kg (lb.)
0,04 (0.08)
Magnet
Neodymium
Dome
Tetolon
D mm
26
Re Ohm
3,7
Fs Hz
1500
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,07
BL T*m
1,3
Qts
1,6
Qes
3,5
Qms
2,9
Spl dB
92
A
44 mm
1.73 in.
B
38,5 mm
1.52 in.
C
20 mm
0.79 in.
D
9,1 mm
0,36 in.
HERTZ Cento 6X9" 3-Way Coaxial System 300W With Grilles -...
$314.99
The HERTZ CX690 is a high-performance 6×9-inch 2-way coaxial speaker engineered to deliver powerful, well-balanced sound even in challenging horizontal installations. Designed for car audio enthusiasts, it combines robust power handling, excellent sensitivity, and refined tonal accuracy for a premium in-car listening experience.
Featuring a semi-pressed paper-mica (SPP-M) elliptical cone, the CX690 achieves the ideal balance between lightness and damping, resulting in tight mid-bass and controlled response. A wide rubber suspension allows long excursion while minimizing distortion at high volumes.
High frequencies are handled with precision by a 40 mm Tetolon dome tweeter, supported by a neodymium magnet, ensuring smooth, distortion-free mid and high-range reproduction. The speaker’s high-density ferrite magnet and low-carbon polar plates reduce distortion under high power, while the rigid basket with metallic finish and rubber magnet cover suppresses unwanted vibrations.
Perfect for factory upgrades or custom car audio builds, the HERTZ CX690 delivers clarity, punch, and durability in a compact coaxial design.
Key Features
6×9" 2-Way Coaxial car speaker system
SPP-M (Semi-Pressed Paper-Mica) cone for balanced sound and durability
40 mm Tetolon dome tweeter for clear, detailed highs
Neodymium tweeter magnet for high efficiency
Wide rubber surround for extended excursion and damping
High-density ferrite magnet for reduced distortion at high power
Rigid basket with rubber magnet cover to minimize vibrations
Optimized for in-car audio systems
Technical Specifications
Specification
Details
Brand
HERTZ
Model Name
CX690
Series
690
Speaker Type
2-Way Coaxial
Woofer Size
6 × 9 in (230 × 150 mm)
Tweeter Size
40 mm (1.58 in)
Supertweeter Size
20 mm (0.8 in)
Cone Material
Semi-Pressed Paper-Mica (SPP-M)
Tweeter Dome
Tetolon
Tweeter Magnet
Neodymium
Impedance
4 Ω
Sensitivity
93.5 dB SPL
Frequency Response
40 Hz – 23 kHz
Power Handling (Continuous)
100 W
Power Handling (Peak)
300 W
Woofer Voice Coil
30 mm (1.2 in)
Tweeter Voice Coil
28 mm (1.1 in)
Connectivity
Coaxial (Wired)
Recommended Use
In-Car Audio Systems
Color
Black
Speaker Size
9 Inches
Weight
6.8 lbs (3.42 lbs per unit approx.)
Included Components
CX690 Speakers
Manufacturer
Hertz
GTIN
08018823126687
ASIN
B07JWDZYY1
HERTZ Dab+ Digital Radio Module For Hertz Marine Hmr 20...
$314.99
This module adds DAB+ DIGITAL RADIO capability to Hertz Marine Source. Provided with the dedicated antenna.
Optional for Capri and HMR 20
HERTZ Digital Interface Processor (S8 Dsp)
$1,309.99
The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
General Specifications
POWER SUPPLY
Nominal Power supply voltage / fuse:
7 ÷ 20 VDC / 1A
Pulse operating voltage:
5 ÷ 24 VDC
Idling current:
0.34 A
OFF current (ART= OFF):
<80 uA
OFF current (ART= ON):
<80 uA
Remote IN
6 ÷ 20 VDC (10 mA)
Remote OUT
4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable):
1.5 ÷ 7 VDC
Input Stage
Analog low level Inputs
6 ch. (Differential input) (Molex microfit to RCAs)
Analog high level Inputs
6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator)
Digital inputs
Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA)
Input sensitivity (low level)
0.8V – 6V RMS
Input sensitivity (high level)
2.5V – 21V RMS
Analog inputs management
Audio input routing matrix type
Analog inputs eq
7 bands paragraphic for each input channel
ART
Automatic Remote Turn-On/Off with Speaker-In
Output Stage
Analog outputs (rca)
8 channels
Max output level (rms) @ 0.05% THD
4V
Analog outputs management
The DSP controls each output channel: gain, crossover, EQ, delay, polarity
Bandwidth
10Hz – 40KHz (+/-3db)
Signal to noise ratio (A weighted)
105dBA (Analog Input) 112dBA (Digital Input)
THD+N (@ 1Vrms out, @ 1Khz)
<0.005%
Crosstalk (channel separation) @ 1KHz
>95dBA
Digital Signal Processor
Sample rate
96KHz
Bit depth
24
Output equalizer
15 bands per channel w/ adjustable Q and Frequency
Equalizer resolution
1/10th dB per step +12dB / -12dB
Time alignment (distance)
0 ÷ 468.4 cm / 0 ÷ 184.4 inches
Time alignment (time)
0 ÷ 13.5ms
Time alignment (step)
0,08 ms; 2,8 cm / 1.1 inch
Time alignment (fine set)
0,02 ms; 0,7 cm / 0.27 inch
Crossovers
AP/HP/LP/BP all channels
Crossover type
Butterworth, Linkwitz-Riley, Bessel (All Channels)
Crossover slope
From 6dB/oct. until 30dB/oct. (6dB step)
Crossover steps
120 steps 20Hz-20KHz
Mute function
Each channel individually, or all channels.
Presets
4 presets
Presets selection
2 specific wires to control the 4 presets selection by extarnal switches.
Input selection by wire
One specific wire to select the desired input between Analog or Digital.
Audio signal compressor on output stage
Yes (enable/disable)
DSP chipset
Analog Device: ADAU1451
DSP management by bt app (iOS/ Android)
1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file.
Setup file sharing via bt
Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode.
DSP management by pc / mac / ios / android
Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Physical Specs
Max size W x H x D (mm/inch)
130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47
Weight (kg/lbs)
0,66 / 1.45
HERTZ Hertz Marine 10M Remote Controller Extension Cable (Hma C1310)
$174.99
HMA C1310 extension cable is made to connect CAPRI HD1 to the CAPRI H100 main unit.
Optional for CAPRI - 10 mt.
HERTZ Hertz Marine 6M Remote Controller Extension Cable (Hma C1306)
$119.99
13 pin remote controller extension cable 6 mt.
Optional for HMR 50.
HERTZ Hertz Marine Remote Controller Y-Splitter Cable (Hma C13Y)
$109.99
13 pin y cable.
Optional for HMR 50
HERTZ Marine 12" 1000W 2 Ohm Svc Rgb Black Subwoofer...
$734.99
The new HMS 12 marine classic charcoal grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The classi grille, features built-in LEDs. Can be easily and painted the perfect color for your vessel. The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion. Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion!
Size mm (in.)
300 (12)
Power Handling - Continuous W
500
Power Handling - Peak W
1000
Impedance Ohm
2
Depth mm (in.)
191 (7.52)
Voice Coil Type
single
No Filter Component
2Ω INFINITE BAFFLE LED SUBWOOFER
Voice Coil Ø
65.5 (2.6)
Magnet size D x d x h mm (in.)
156 x 80 x 40 (6.14 x 3.15 x 1.57)
Weight of one component kg (lb.)
7,6 (16.8)
Magnet
High density flux ferrite
Cone
Polypropylene with UV inhibitors
D mm
265
Xmax mm
19
Re Ohm
1.8
Fs Hz
30
Le mH
0.41
Vas I
95.4
Mms g
114
Cms mm/N
0.225
BL T*m
8
Qts
1
Qes
1.1
Qms
11.1
Spl dB
89.5
A
342.9 mm
13.5 in.
B
279.4 mm
11 in.
C
192.8 mm
7.59 in.
D
140.6 mm
5.54 in.
F
52.2 mm
2.06 in.
Frequency response
HERTZ Marine 1240W 1 Channel Amplifier (Hcp 1Mdk)
$944.99
HCP 1MDK mono marine amplifierfeatures latest generation D-Class 2Ω stable output stage reaching the impressive RMS power of 740 W x 1 (4 Ω). Engineered and tested for the real environment of application (UV, salt-fog, vibrations, high/low temperature, thermal shock, dust), HCP 1MDK features a compact design built from extruded aluminium heatsink with top side ensuring effective heat transfer. The special balanced input circuitry reject electro-magnetic disturbances and the Hi-Level and lo-level inputs are compatible with any source. The Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB adds more punch to subwoofer and SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to prevent damage to the subwoofer. The continuously adjustable PHASE control (0 to 180°) optimizes alignment of woofer bass frequencies with sub ones. The Optional Remote Volume Control (HRC) provides the ability to adjust subwoofer volume level from the dashboard.
General Specs
Channels
1
POWER SUPPLY
Power supply voltage / fuse:
11 ÷ 15 VDC / 3 x 30 A
Idling current (power ON/OFF)
0.8 A / 1 mA
Consumption @ 2 Ω, 14.4 VDC (Max Musical Power):
45 A
Remote In:
7 ÷ 15 VDC - 1 mA
ART:
Automatic Remote Turn-On/Off with Speaker-In
AMPLIFIER STAGE
Distorsion - THD (100 Hz @ 4 Ω):
0.25%
Bandwidth:
10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V):
100 dB
Damping factor (100 Hz @ 4 Ω):
> 100
Pre-In sensitivity:
0.2 ÷ 5 VRMS
Speaker-In sensitivity:
0.8 ÷ 20 VRMS
Load impedance (MIN)
@ 1 Ch:
2 Ω
Max size (mm / in.):
315 x 190 x 50 / 12.40 x 7.48 x 1.97
Weight (kg / lb.):
3 / 6,61
Adjustable Crossovers
yes
Output Power
Output Power (RMS) @ 14.4 VDC, THD 1%
1 Ch:
600 W x 1 (4 Ω)
1 Ch:
1100 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch:
740 W x 1 (4 Ω)
1 Ch:
1240 W x 1 (2 Ω)
CEA 2006-A Ratings:
RMS Power (4 Ω, ≤1 %THD + N, 14.4 V):
600 W x 1 Ch
S/N Ratio (ref. 1 W output):
80 dBA
Total Power
1240 W
INPUTS / FILTERS
INPUTS:
PRE IN / SPEAKER IN
Pre out Hi-Pass:
50 ÷ 250 Hz @ 12 dB/Oct.
Filters FULL:
Yes
Lo-Pass:
50 ÷ 250 Hz @ 24 dB/Oct.
SUBSONIC (on/off):
25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust):
(0 ÷ 6) dB
PHASE(adjust):
(0 ÷ 180) deg
Remote Volume Control (adjust):
(-50 ÷ 6) dB
Physical Specs
mm
in
A
315
12.40
B
291
11.45
C
190
7.48
D
166
6.53
E
50
1.97
HERTZ Marine Bluetooth Media Receiver - Bluetooth (Hmr Bt)
$349.99
Thanks to the IP67 water resistance rating, the HMR BT Bluetooth® audio controller/receiver is ideal for small boat and Powersports applications. When connected directly to an amplifier, it can be used as a stand-alone source unit/receiver or it can provide Bluetooth® connectivity to any source unit with line-level inputs. The white LED backlit push-button controls are always well visible at any hour of the day. Ready to have some serious fun with the HMR BT Bluetooth® Audio Controller/Receiver?
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
marine digital media receiver
made for off-road and marine use
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
rear-panel amplifier output
cutout dimensions: 1.77"
warranty: 1 year
MFR # HMR BT
Item # 301HMRBT
Specification
FRONT PANEL IP RATING
IP67
LINE OUTS
1x Stereo RCAs (left and right)
FREQUENCY RESPONSE
20 Hz - 18 kHz (±1dB)
S/N Ratio @ 4Vrms (THD <1%)
93 dB (20 Hz - 20 kHz)
PREOUT VOLTAGE & IMPEDANCE
4V RMS / <100Ohm
REMOTE OUT
8V - 24V
OPERATING VOLTAGE
8V - 28V
Fuse
2A
OPERATING TEMPERATURE RANGE
-10°C - 50°C
Sources
BLUETOOTH®
5.0Audio streamingMax distance 10 m / 30 ft.
A2DP / AVRCP
Playback
Qualcomm® APTX low latency
CD quality streaming
REMOTE CONTROL
HMC U1
Size & Mounting
Mounting Hole diameter mm (in.)
Ø 45 (1.77)
Mounting Method
Panel mount (4 screws); U-Bracket
Physical Specs
A
73,2 - 2.9 (mm - in.)
A1
64,1 - 2.5 (mm - in.)
B
63,7 - 2.5 (mm - in.)
B1
27,7 - 1.09 (mm - in.)
C
39,1 - 1.54 (mm - in.)
D
16,7 - 0.66 (mm - in.)
E
55,8 - 2.2 (mm - in.)
HERTZ Marine Remote Control (Hmc U1)
$294.99
Play your favorite song and pump up the volume while swimming in open water. With IPX7 certification you can install HMC U1 remote control anywhere on the boat. Optional for CAPRI, HMR 50, HMR 20, HMR 18, HMR 18D, HMR 15, HMR 15 D, HMR 10 D, HMR 10, HMR BT.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 45 (1,77)
Mounting Method
U-Bracket
Physical Specs
mm
in
A
68
2.68
A1
70
2.76
B
58
2.28
C
29
1.13
D
18
0.70
E
46
1.83
HERTZ Marine Remote Control With Tft Display (Hmc D1)
$429.99
HMCD1 provides the ability to replicate every function of the HMR 50 main unit, creating up to 3 independently controlled listening areas.
Optional for HMR 50
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 75 (2.95)
Mounting Method
U-Bracket/Screw
Physical Specs
mm
in
A
146
5.75
B
105
4.13
C
12
0.47
D
34
1.34
E
80
3.15
G
50
1.97
H
133
4.98
HERTZ Marine Remote Control With Tft Ips Display (Capri Hd1)
$849.99
CAPRI HD1 allows to replicate every function of the main unit in every place of the boat you desire, maximizing the onboard comfort.
Optional for CAPRI.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 60 (2.95)
Mounting Method
Screw
Physical Specs
mm
in
A
178.5
7.02
A1
163
6.42
B
101
3.57
B1
84
3.31
C
18
0.71
D
31.30
1.23
E
59. 89
2.36
F
8
0.31
HERTZ Mille 10" (250Mm) Subwoofer Grille - Single (Mg 250.3...
$114.99
Discover the MILLE PRO MG 250.3, a specially designed speaker grille from Hertz. Tailor-made for Mille Legend/Pro subwoofers, it offers complete protection for your subwoofer. It features a robust metal structure consisting of a solid cast aluminum ring and a black steel mesh grille with a diamond-cut Hertz logo. The mounting screws are completely hidden, allowing for elegant integration into the vehicle cabin. Included are M5 self-tapping hexagon socket screws with bit driver.Physical SpecificationsA 274 mmW 45 mm
HERTZ Mille Legend 10" (250Mm) Subwoofer Grille - Single (Mlg...
$124.99
The optional MLG 2500.3 Hertz Mille Legend subwoofer grille is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.
Size mm (in.)
250 (10)
No Filter Component
Grille
HERTZ Mille Legend 35Mm Tweeter - Pair (Ml 280.3 Legend)
$554.99
To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound.From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion.This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion.Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Power Handling - Peak Note
(Hi-Pass filtered @ 1,8kHz - 12dB Oct.)
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k - 28k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,10 (0.22)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,013
Mms g
0,4
Cms mm/N
0,09
BL T*m
1,9
Qts
1,3
Qes
1,9
Qms
4
Spl dB
92
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
29 mm
1.14 in
D
13,5 mm
0.53 in.
HERTZ Mille Pro 12" (300Mm) Subwoofer Grille - Single Unit...
$114.99
Designed for MP 300 D2/D4.3 , MG 300.3 grille features:1. Tailor-designed for Mille Legend/Pro subwoofers, providing total protection.2. Full metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo3. Mounting screws totally hidden for a superior integration within the car cabin.4. M5 self-tapping hexagon socket screws with bit driver included.
No Filter Component
GRILLE
A
327 mm
12.8 in.
B
45 mm
1.7 in.
HERTZ Mille Pro 12" (300Mm) Subwoofer Grille - Single Unit...
$134.99
The optional MPG 300 Hertz Mille PRO subwoofer grille is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.
Size mm (in.)
300 (12)
No Filter Component
Grille
HERTZ Mille Pro 25Mm (1") Tweeter - Pair (Mp 25.3...
$259.99
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Component
Tweeter
Size mm (in.)
29 (1.14)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
1.4k ÷ 22.5k
Magnet size D x d x h mm (in.)
24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
0.07 (0.14)
Magnet
Neodymium
Dome
Tetolon
D mm
29
Re Ohm
3,9
Fs Hz
1200
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,1
BL T*m
1,6
Qts
0,55
Qes
1,98
Qms
0,57
Spl dB
91
A
44 mm
1.73 in.
B
41 mm
1.61 in.
C
27 mm
1.06 in.
D
17 mm
0.67 in.
HERTZ Mille Pro 28Mm (1.38") Tweeters And Crossovers - Pair...
$314.99
MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k ÷ 25k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,075 (0.16)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,024
Vas I
-
Mms g
0,4
Cms mm/N
0,08
BL T*m
2
Qts
1,1
Qes
1,7
Qms
3,3
Spl dB
91
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
28 mm
11.1 in.
D
13,5 mm
0.53 in.
E
72 mm
2.8 in.
F
45,6 mm
1.8 in.
G
23 mm
0.9 in.
HERTZ Mille Pro 8" (200Mm) Subwoofer Grille - Single Unit...
$124.99
Designed for ML 2000.3, MG 200.3 grille features:1. Tailor-designed for Mille Legend/Pro subwoofers, providing total protection.2. Full metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo3. Mounting screws totally hidden for a superior integration within the car cabin.4. M5 self-tapping hexagon socket screws with bit driver included.
No Filter Component
Grille
A
233 mm
8.78 in.
B
38 mm
1.5 in.
HERTZ Mille Pro Crossover Set - Pair (Mpcx 2 Tm.3...
$314.99
The MPCX 2 TM.3 car audio crossover is specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.
Component
Crossover
Adjustment
Tweeter 0 / +2 dB
Weight of one component - Crossover kg (lb)
0,16 (0.35)
Crossover
Midrange Low pass 5,5 kHz @ – 6 dB Oct.Tweeter Hi pass 5,5k Hz @ – 12 dB Oct.
Physical Specs
G
102 mm
4.02 in.
H
76,5 mm
3.01 in.
I
37 mm
1.46 in.
Features
1. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.2. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.3. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.4. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.5. Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.
HERTZ Saddle Bag Lid Kit And Speaker Harness To Suit...
$849.99
The Hertz HD14H Kit is the ultimate solution for upgrading the audio system on your motorcycle. Designed with precision and ease of installation in mind, this kit is perfect for riders who want exceptional sound quality without the hassle. Please note, speakers are not included in this kit.
The HD14H Kit includes:
Saddlebag Lid: Crafted to seamlessly integrate with your motorcycle’s saddlebags, this lid is engineered to house Hertz 690 NEO.1 speaker. Its sleek and durable design ensures a perfect fit and enhances your bike's aesthetics while delivering a secure and acoustically optimized mounting location.
Speaker Harness: This plug-and-play harness makes installation a breeze. It connects directly to your existing audio system, eliminating the need for complex wiring or modifications.
Mounting Accessories: The kit comes with everything you need for a professional installation, including a cut-out template, 6x9 inch speaker mounts, speaker grilles, and all necessary mounting hardware.
Why Choose the HD14H Kit?
Custom-fit for a clean, professional look
Simplifies the upgrade process with easy installation
Built to last with high-quality materials
Designed to deliver superior sound performance
Take your ride to the next level with the Hertz HD14H Kit and enjoy an unparalleled audio experience every time you hit the road.
Component
Includes HD14 LID KIT and Speaker Harness (Speakers not included)
HERTZ Spl Show 1.8" (46Mm) High Efficiency Compression Driver -...
$524.99
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only.
Component
HIGH EFFICIENCY COMPRESSION DRIVER
Size mm (in.)
46 (1.8)
Power Handling - Peak W
120
Power Handling - Peak Note
Hi-pass filtered @ 5 kHz - 12 dB Oct.
Impedance Ohm
4
Voice Coil Ø
35 (1.4)
Frequency Response Hz
2k ÷ 20k
Weight of one component kg (lb.)
0,53 (1.17)
Magnet
Neodymium
Dome
Aluminium
D mm
46
Re Ohm
3,3
Fs Hz
4000
Le mH
0,02
BL T*m
3,5
Spl dB
109
A
69 mm
2.72 in.
B
52 mm
2.05 in.
C
65,7 mm
2.59 in.
D
33,3 mm
1.31 in.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
