All 4WD Parts and Accessories

#N/A

Description MAZDA BT50 TOWING MIRRORS Year: Sept 2020 - CurrentModel: Mazda BT50 (Chrome, Electric, Indicators, Blind Spot Monitoring)Part Number: TM1603 DESIGNED & TESTED FOR TOWING! MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle! We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving. Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle. FEATURES: Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving Slightly curved glass for even more vision, but not too curved that its distracting Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension Designed for towing caravans, camper trailers, trailers, boats and horse floats Available to suit a growing range of tray backs and towing vehicles   Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions

The Direction-Plus™ TR+ Throttle Controller TR0601DP fits Mitsubishi Pajero Sport and Triton models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0609DP fits Pajero, Triton and Challenger models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0801DP fits Nissan Patrol GU ZD30 (3.0L 4cyl) 2006-2018 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! NOTE: This TR+ throttle controller model is only suited to common rail vehicles (CRD) due a changeover in 2006/07 where the throttles are completely different. CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0719DP fits: Nissan Navara D22 YD25 (2.5L 4cyl) 2008-2015 The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0221DP fits: LDV T60 I4 (2.0L 4cyl) 2017-2022 LDV D90 Turbo MPFI  (2.0L 4cyl) 2017-2022 The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0830DP fits Holden Colorado (2008-2012), Rodeo (2007-2008); Isuzu D-Max (2012-2022) and MU-X (2013-2022) ; Mazda BT-50 (2020-2022) Toyota Hilux 1GD-FTV (2016-2022) 2GD-FTV (2018-2022), Fortuner 1GD-FTV (2016-2022), Landcruiser 70 (2007-2022), 200 series (2007-2022) and 300 series (2022), Prado 150 1GD-FTV (2015-2021) and 155 series 1GD-FTV (2015-2022) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0505DP fits Great Wall Steed (2006-2022), V200 (2011-2014), V240 (2006-2021) and X240 (2006-2012) models and Ssangyong Musso 2.2lt Turbo Diesel 2022 model. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0715DP fits Everest / Ranger / Raptor and BT-50 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0833DP fits Ford Ranger WEAT / WLAT (2007-2011) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

Direction-Plus™ ProVent® oil separator kit PV665DPK suits Ford Ranger P5AT model and it is mounted on the radiator support panel. The ProVent® oil separator kit PV665DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. HOW IT WORKS Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance.

Direction-Plus™ ProVent® oil separator kit PV602DPK suits Holden Colorado / Colorado 7 models. The ProVent® oil separator kit PV602DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. HOW IT WORKS Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance

Direction Plus™ Fuel Manager Pre-Filter Kit FM645DPK suits Isuzu D-Max, MU-X and Mazda Bt-50 4JJ3-TCX (2020-2022) models, protecting its engine against costly injector failure. HOW IT WORKS Installing a Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.This leaves the O.E.M fuel filter to do the final and finer filtration, ensuring you are maximising the protection of your diesel fuel system.

Direction-Plus™ PreLine-Plus PL645DPK is an innovative pre-filter system for diesel fuel which suits Isuzu D-Max, MU-X and Mazda Bt-50 4JJ3-TCX (2020-2022) models. PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.

Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4x4 Storage Drawer System? MSA 4X4's Storage Drawer Systems are designed with a patented slide technology offering a smoother opening under heavy loads. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4's Storage Drawer Systems are constructed with aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented "Stay-Open Block" allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4's Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. Features: 100% Drawer extension for complete access Patented "Stay-Open Block" Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels Includes: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4's Lifetime Guarantee Parts Included: Left Drawer Module (1045 x 530 x 275) Left Wing & Fit Kit Single Width Trim Associate Parts: Drawer Divider Single Drawer Side Carpet Piece Drawer Stacking Kit Left Power Panel Left Explorer Pre-Cut Panel

SUITS: Toyota Landcruiser 100 Series (models with rear aircon) Toyota Landcruiser FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee   ARTS INCLUDED: Left Drawer Module Left Fit Kit Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm WEIGHT 46.2kg

One of the lightest drawer systems ever made, the ADR Crash Test Certified MSA 4X4 Explorer Aluminium Storage Drawer System boasts more storage space than most other systems with the same outside dimensions! Patented “Pro-Glide” technology smoothly handles up to 250kg per pair of drawers providing smooth opening under heavy loads as well as 100% drawer extension and access. The entire drawer comes out further than the frame! No hard to reach items in our drawers and no unpacking of contents to reach items at the back! Designed from the ground up to establish the way a quality 4WD system should be, the MSA 4X4 Explorer Aluminium Storage Drawer System delivers many more features than any other 4WD Drawer system in the market today!We've re-set the benchmark in quality 4WD Drawer Systems from a safety, functionality and quality perspective. Features include: 100% aluminium construction with anodised aluminium components means that our drawers are super strong, lightweight and have a lifetime corrosion resistance. This also means that our drawers are lighter than many generic steel drawers in the market – a very important feature as the GVM (Gross Vehicle Mass is the maximum weight that a vehicle can carry including its own weight) is crucial to the safe and efficient operation of a vehicle. The patented “stay-open block” in our Explorer Aluminium Storage Drawer System allows the drawer to remain in an open position, even on a 30-degree slope! This is another important safety feature which prevents a fully loaded, open drawer from unexpectedly slamming shut whilst still in use. This “stay-open block” also doubles as two electrical contacts, that when the drawer is open, create an electrical circuit without any moving wires to power the included LED strip light. The patented internal LED strip light delivers increased practicality, complete with manual override switch conveniently located in the drawer face. The patented “Pro-Glide” system of our MSA 4X4 Explorer Aluminium Storage Drawer System utilises the side of the drawers and the frame as the actual slide unit, which means that no usable storage space inside the drawers are lost to traditional side slide runners. The over extension using custom sealed bearings, removes the need for additional slide components, maximising storage space. More internal drawer space is achieved with equivalent external frame dimensions of other drawers. Flush finish internal drawer sides provide greater storage practicality without any internal folds to hinder how larger items are placed inside the drawers or removed from the drawers. Flush fitting removable wing kits in our Explorer Aluminium Storage Drawer Systems are designed to clip or bolt in, allowing access to storage areas beside the drawers! This is great for customers who want to store items such as their second battery or compressor in that available space. If a customer has a Fridge Drop Slide or other item hard mounted onto the wing kit, access under the drawer wings are also possible due to the unique removable front facing wing panels. Floor extensions are included as standard with Dual Cab Ute wing kits which are the wing pieces behind the drawers to create a full flat surface at the back of the tray, preventing items from falling behind the drawers. Our Explorer Aluminium Storage Drawer System's injection moulded design-registered lock system with purpose built injection-moulded frame & aluminium components help deliver a 100% safe and secure lock system that cannot be levered open from underneath (unlike other drawers), providing safe storage. An anodised knurled aluminium handle has been designed for comfort & practicality. A dust & water resistant designed seal around the front panel resists ingress, making our drawers the perfect storage solution for road trips through the red dust centre of Australia. Stainless steel fasteners are also used throughout where possible for a rust free and problem free life! Explorer Aluminium Storage Drawer Systems are available in 3 different lengths to suit popular wagons and dual cab utes. The 930 drawer system is 945mm long (overall complete drawer length including handle lock) and suits vehicles such as the Ford Everest, Toyota Fortuner, 150 Series Prado, 120 Series Prado and 76 Series Wagons. The 1030 drawer system is 1045mm long (overall complete drawer length including handle lock) and suits vehicles such as the 200 Series & 100 Series Land Cruisers. The 1350 drawer system is 1365mm long (overall complete drawer length including handle lock) and suits most dual cab utes! We recommend that any tub liners are removed before installing our drawer system as the tub liners do not follow the contours of the tub precisely enough and won’t result in an ideal fit. Whilst every detail has been taken into account and engineered specifically to deliver the best and most reliable 4WD Storage Drawer System available in the market, MSA 4X4’s Lifetime Guarantee ensures that all Explorer Aluminium Storage Drawer System customers have the peace of mind that if anything were to go wrong, that they’d be looked after. 1030 Complete Double Drawer System to suit Nissan Patrol GU ST Y61 (Series 4-10) 10/04-2016 Complete Kit includes: Left & Right 1030 Drawer Modules Left & Right Wing & Fit Kits Double Drawer Join Kit Double Trim

MSA 4X4 Double Storage Drawer System for Toyota LandCruiser 76 Series (2007-Current) Transform the storage capability of your Toyota LandCruiser 76 Series with the MSA 4X4 Double Storage Drawer System. Designed and engineered specifically for touring, work, and off-road applications, this premium storage solution keeps your gear organised, secure, and easily accessible while maximising available cargo space. Featuring MSA 4X4's patented drawer slide technology, each drawer extends 100% beyond the frame, providing complete access to stored equipment without the frustration of hard-to-reach items. Fully sealed stainless steel bearings and nylon rollers deliver smooth, quiet operation even under heavy loads, while reducing overall system weight. Constructed from lightweight yet incredibly strong aluminium with anodised components and stainless steel fasteners throughout, this drawer system is built to withstand years of harsh touring and off-road use while remaining corrosion resistant. Key Features Designed specifically for Toyota LandCruiser 76 Series (2007-Current). 100% drawer extension for complete access to stored items. Patented Stay-Open Block keeps drawers open even on slopes up to 30 degrees. Fully sealed stainless steel bearings with nylon rollers. Internal LED light strip activates at full drawer extension. Safe and secure anti-lever lock system. Dust-resistant seals help keep stored items clean. Removable wing and face panels provide access to additional storage areas. Premium Construction Lightweight aluminium drawer modules. Anodised aluminium components for enhanced durability. Rust-resistant stainless steel fasteners throughout. Engineered for strength, longevity, and corrosion resistance. Reduced overall weight compared to traditional steel drawer systems. Safety & Compliance Crash-tested and ADR compliant. Tested to ADR3/02, ADR34/01, and ADR42 standards. Includes cargo barrier mounting points. Includes child restraint anchor points. Designed to improve cargo security and occupant safety. What's Included Left Drawer Module Left Fit Kit Left Wing Kit Right Drawer Module Right Fit Kit Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire Complete Wing Kits Cargo Barrier Mounting Points Child Restraint Points Compatible Accessories Drawer Stacking Kit (40001) Drawer Divider (EDDIV-A) Left Power Panel (EPP-Left) Right Power Panel (EPP-Right) Pre-Cut Panels (SP0506 & SP0507) Large Battery Box (40018) Slimline Battery Box (40019) Explorer Storage Bag Range Deluxe Coffee Kits Dimensions External Dimensions Overall Length: 945mm (including handle lock) Overall Height: 275mm Overall Width (Single Drawer): 510mm (excluding wings) Internal Drawer Dimensions Internal Length: 830mm Internal Width: 433mm Drawer Height: 211mm Usable Height: 215mm Specifications Product Code: E930A-LC76-COM Vehicle Fitment: Toyota LandCruiser 76 Series (2007-Current) Product Type: Double Storage Drawer System Weight: 86.2kg Warranty Backed by the renowned MSA 4X4 Lifetime Guarantee for long-term confidence and reliability.

MSA 4X4 1350 Left Storage Drawer Module - E1350-Left The MSA 4X4 1350 Left Storage Drawer Module is a premium storage solution designed to keep your tools, recovery gear, camping equipment, and valuables organised, secure, and easily accessible. Featuring MSA's innovative drawer technology, this heavy-duty storage module delivers exceptional durability, smooth operation, and maximum storage efficiency for touring, work, and off-road applications. Built from lightweight yet incredibly strong materials, the drawer extends 100% from the frame, providing complete access to your stored gear without the frustration of reaching into the back of the drawer. Fully sealed stainless steel bearings and nylon rollers ensure smooth, quiet operation while maintaining excellent load-carrying performance. The patented Stay-Open Block allows the drawer to remain open even on slopes of up to 30 degrees, while the integrated LED light strip automatically illuminates the drawer contents when fully extended for added convenience in low-light conditions. Key Features 100% drawer extension for full access to stored equipment. Patented Stay-Open Block keeps the drawer open on slopes up to 30°. Fully sealed rust-resistant stainless steel bearings. Nylon roller system for smooth and quiet operation. Integrated LED light strip activates at full extension. Safe and secure lock system. Dust-resistant seal helps keep contents clean. Corrosion-resistant stainless steel fasteners throughout. Benefits Provides organised and secure storage for touring and work equipment. Allows quick access to tools and gear. Improves vehicle storage efficiency. Protects contents from dust and dirt. Built to withstand demanding off-road conditions. Offers reliable long-term performance. What's Included Left Storage Drawer Module Cargo Barrier Mounting Points Child Restraint Points Compatible Accessories Left Fit Kit Single Width Trim Drawer Stacking Kit (40001) Drawer Divider (EDDIV) Large Battery Box (40018) Slimline Battery Box (40019) Explorer Storage Bag Bundle (20013) Explorer Storage Bag Large (20012) Explorer Storage Bag Medium (20011) Explorer Storage Bag Small (20010) Deluxe Coffee Kit Black (45042) Deluxe Coffee Kit Cream (45043) Dimensions External Dimensions Length: 1365mm (including handle lock) Width: 530mm Height: 275mm Internal Drawer Dimensions Internal Length: 1250mm Internal Width: 453mm Drawer Height: 211mm Usable Height: 215mm Specifications Product Code: E1350-Left Product Type: Single Storage Drawer Module Fitment: Generic Fit Weight: 48.2kg Important Information MSA 4X4 Storage Drawer Systems are designed to fit directly to the vehicle tub body. Not compatible with vehicle tub liners. Tub liners must be removed prior to installation. Warranty Covered by the renowned MSA 4X4 Lifetime Guarantee for complete confidence and long-term reliability.