FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$1,996.20
$2,218.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm/53" (W) x 1762mm/69.4" (L)), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*This rack fits a load bed width of 1405mm - 1494mm (55-58") and length of 1804mm - 2032mm (71-80").For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x RRSTG09 - Slimline II Tray - 1345mm(W) X 1762mm(L) - by Front Runner1 x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 36.0kg (79.2lbs)
FRONT RUNNER Land Rover Defender Ute/Dc Spare Wheel Carrier /...
$901.80
$1,002.00
A spare wheel carrier for the Land Rover Defender 90 and 110 Ute.
Allows fitment of an additional spare wheel to the rear of the vehicle.
Secures to the chassis and the load bed body with supplied brackets and hardware.
The spare wheel can then swing open to allow the tail gate to be opened.
FRONT RUNNER Land Rover Defender 130 Ute Spare Wheel Carrier...
$1,129.50
$1,255.00
A spare wheel carrier for the Land Rover Defender 130/DC Ute.
Allows fitment of an additional spare wheel to the rear of the vehicle.
Secures to the chassis and the load bed body with supplied brackets and hardware.
The spare wheel can then swing open to allow the tail gate to be opened.
Load capacity 60kg (132.3lbs)
FRONT RUNNER Stainless Steel Water Tank For Ute Drawer System...
$1,414.80
$1,572.00
A 52L stainless steel water tank that fits behind the Front Runner Ute drawer system. This water tank is positioned below the drawer deck to utilize the concealed space between the back of the drawer and the vehicle to preserve needed cargo space. Includes a 12V pump.
Water Tank:A 52L stainless steel water tank that fits behind the Front Runner Ute drawer system.
This water tank is placed below the drawer deck to utilize the space between the back of the drawer and the vehicle.
All piping and fittings are provided to plumb the tanks contents to the front of the drawer system for ease of use.
Knocked out holes in the drawer's side panel plate accommodates the fittings and ensures that all the pipe work is neatly hidden.
Additionally a 12 volt electric pump is included to increase the outlet pressure and flow rate.
Water Pump:Features:
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes.
Compact design and plug-in port fittings make installation easy.
Can run dry without damage and handle liquids up to 130° F (54° C).
No metal contact with liquid being pumped.
Ball bearing drive throughout pump and motor assures longer pump life.
Excellent self-priming capability. Pump may be located above the liquid level.
Powerful, permanent magnet motor with low current draw and long life brushes.
Consists of:1 x Stainless Steel Water Tank1 x Shut-off Valve1 x 12V Water PumpPipe KitInstallation HardwareWater Tank:Materials used:304 Stainless SteelProduct Dimensions:1065mm (41.9") W x 230mm (9.1") L x 285mm (11.2") HWeight:14.2kg (31.3lbs)Water Pump:Pump Specifications:12 Volts12.5 Liters per minute35psiProduct Dimensions:360mm (14.2") L x 135mm (5.3") W x 110mm (4.3") HWeight:2.13kg (4.7lbs)Approximate Total Product Weight:16.33kg (36lbs)
FRONT RUNNER Tonneau Cover Slimline Ii Load Bed Rack Kit...
$2,259.00
$2,510.00
Get your Pickup Truck geared up for any adventure with the Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to customize your gear setup with over 55 accessories. This particular kit is designed for a load bed with a Tonneau Cover and creates a full-size rack that sits above the load bed.
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Tonneau Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1762mm) and 6 Pickup Roll Top Leg Mounts that fit into the supplied tracks that are mounted onto your Tonneau Cover. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM09 - SLII Tray - 1475mm(W)X1762mm(L)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 38.67kg (85.25lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1815mm (71")Height: 275mm (11")Shipping Weight:Weight: 40kg (88lbs)
FRONT RUNNER Toyota Land Cruiser 79 Dc Ute Slimline Ii...
$1,191.60
$1,324.00
This 954mm/37.6" long 3/4 size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
This 954mm/37.6" long 3/4 size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTJ05 - Slimline II Tray - 1425mm(W) X 964mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 20kg (45lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 23.8kg (52.4lbs)
FRONT RUNNER Toyota Land Cruiser 79 Dc Ute Slimline Ii...
$1,700.10
$1,889.00
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruisers DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruisers DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
3 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 32.4kg (71.2lbs)
FRONT RUNNER Toyota Tacoma Ute (2005-Current) Slimline Ii Load Bed...
$1,507.50
$1,675.00
This kit creates a full size rack that sits above your Toyota Tacomas (2005 + w/OEM bed rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)) and 4 Pickup Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Due to load limitations of the factory bed tracks, we do NOT advise loading more than 150 lbs (68 kg). While Front Runner racks and mounting systems have been engineered and built to hold 660 lbs/299kgs, this may exceed your vehicle manufacturers recommendations. Until all vehicle components are made as off-road tough as Front Runners, we suggest contacting your vehicle maker to check load limits before aggressive loading of the rack.
Features
KRTT900T - Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 27.8kg (61.1lbs)
FRONT RUNNER Toyota Tacoma Dc 4-Door Ute (1995-2000) Slimline Ii...
$1,633.50
$1,815.00
This kit creates a full size rack that sits above your Toyota Tacoma's DC 4-Door (1995-2000) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTT904T - Toyota Tacoma DC 4-Door Pickup Truck (1995-2000) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
FRONT RUNNER Toyota Tundra Dc 4-Door Ute (1999-2006) Slimline Ii...
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Toyota Tundra DC 4-Door (1999 to 2006)'s truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTT954T - Toyota Tundra DC 4-Door Pickup Truck (1999-2006) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
FRONT RUNNER Volkswagen Amarok (2010-Current) Egr Rolltrac Load Bed Load...
$546.30
$607.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Volkswagen Amarok when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT010 - Volkswagen Amarok (2010-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK017 - Roof Load Bar Pair 1475mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.54kg (18.83lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1585mm (62")
Height: 165mm (6")
Shipping Weight:
Weight: 8.6kg (19lbs)
FRONT RUNNER Volkswagen Caddy (2022-Current) Slimline Ii Roof Rack Kit...
$1,586.70
$1,763.00
Transform your Volkswagen Caddy into the most versatile cargo carrier imaginable when you fit Front Runner's reliable Slimline II Roof Rack Kit. It's the perfect solution for the tradesman who needs to load up his work gear during the week and his sports or camping gear on the weekend.
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy SWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVC015T - Volkswagen Caddy (22 - Curr) SWB Slimline II Roo
Consisting of:
1x FAVC001 - Volkswagen Caddy (2022-Current) Footrails
1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.82kg (61.33lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 33kg (73lbs)
FRONT RUNNER Volkswagen Caddy Lwb (2015-2020) Slimline Ii Roof Rack...
$1,862.10
$2,069.00
Get your Volkswagen Caddy set up for work or play gear-carrying duties by easily installing the modular and tough Slimline II Roof Rack kit. This rack has more than 55 accessories to gear up for your next Caddy adventure.
This 1964mm/77.32" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy LWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVC013T - Volkswagen Caddy (2015 - 2020) LWB Slimline II Roof Rack
Consisting of:
1x FAVC002 - Volkswagen Caddy (2015-2020) LWB Foot Rail
1x RRSTA10 - SLII Tray - 1165mm(W)X1964mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.71kg (72.11lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 37kg (81lbs)
FRONT RUNNER Volkswagen Caddy Swb (2015-2020) Slimline Ii Roof Rack...
$1,499.40
$1,666.00
Transform your Volkswagen Caddy's gear-carrying capabilities with the proven Slimline II Roof Rack Kit. This rack has over 55 available accessories, so it can easily fulfil your every work or play need. Great for carrying a kayak or long work gear that won't fit in the back.
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 4 Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy SWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVC014T - Volkswagen Caddy SWB (2015-2020) Slimline II Roof Rack Kit
Consisting of:
1x FAVC003 - Volkswagen Caddy SWB (2015-2020) Footrails
1x RRSTA08 - SLII Tray - 1165mm(W)X1560mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 26.11kg (57.56lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 36kg (79lbs)
FRONT RUNNER Volkswagen T6/T6.1 Caravelle Transporter Lwb (2015-Current) Slimline Ii...
$2,729.70
$3,033.00
This 2772mm/109.1" long, full size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your 2015-Current Volkswagen T6/T6.1. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVT019T - Volkswagen T6/T6.1 Caravelle Transporter LWB 2015-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAVT004 - Volkswagen T6/T6.1 Caravelle/Transporter LWB FR
1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 53.54kg (118.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 54kg (119lbs)
FRONT RUNNER Volkswagen Touareg (2002-2010) Slimline Ii Roof Rack Kit...
$1,407.60
$1,564.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Volkswagen Touareg contains Slimline II Tray, Wind Deflector and 6 Feet. It installs easily to factory mounting points with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVT005T - Volkswagen Touareg (2002-2010) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)
FRONT RUNNER Suzuki Jimny (2018-Current) Slimline Ii Roof Rack /...
$1,430.10
$1,589.00
This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the 2018+ Suzuki Jimny contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ005T - Suzuki Jimny (2018-Current) Slimline II Roof Rack / Tall
Consisting of:
3x LASS103 - No 3 Leg 155mm (Pair)
1x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.51kg (67.26lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 180mm (7")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Base Deck -...
$422.10
$469.00
Includes 2 base decks (1 left and 1 right hand side), 3 mounting brackets, installation hardware and fitting instructions.
The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Suzuki Jimny.
The decks are covered with a durable, UV resistant nylon pile carpet.
The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration.
The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow, SUV Drawer / Small.
Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
Please Note: The rear seats need to be removed to install the base deck.
Features
Consists of:
2 x Base Decks (1 Left hand & 1 Right hand side)
3 x Mounting brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
12mm Laminated Plywood
Nylon Carpet
Product Dimensions:
830mm (32.7") L x 920mm (36.2") W x 110mm (4.3") H
Weight:
7.9kg (17.4lbs)
Load Rating:
250kg (551.2)
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Rear Window Molle...
$227.70
$253.00
This Jinmy 4 Gen Molle Panel creates much-needed storage space or storage configuration options.
Installation to vehicles without a curtain airbag (South Africa):
Mounts to the rear grab handle and the factory mounting points under the left or right rear window. No drilling is required.
Installation to vehicles with a curtain airbag (EU and AU):
Drilling is required above the rear window and secures to the factory mounting points under the left or right rear window.
Strap your additional supplies and adventure gear to the Molle Panel using the supplied straps, two (2) long and two (2) short adjustable webbing straps included.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
The Molle Panel is compatible with the Suzuki Jimny Internal Storage Shelf to maximize the load solutions.
Features
Consists of:
1 x Molle Panel
2 x Mounting Brackets
2 x Short Molle Panel Straps
2 x Long Molle Panel Straps
Installation Instructions
Fitting Instructions
Materials Used:
Black powder coated high strength steel
Product Dimensions:
Molle Panel Dimensions:
630mm (24.8") W x 3mm (0.1") D x 450mm (17.7") H
Product Dimensions w/Grab Handle Bracket:
556mm (21.9") H x 630mm (24.8") W x 65mm (") D
Product Dimensions w/Drill Mount Bracket:
458 (19.1") H x 630mm (24.8") W x 50mm (2") D
Weight:
3.7 kg (8.2lbs)
FRONT RUNNER Suzuki Jimny 5 Door (2023-Current) Slimline Ii Roof...
$1,799.10
$1,999.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 5 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ007T -Suzuki Jimny 5 Door (2018-Current) Slimline II Roof Rack
Consisting of:
4x LASS102 - No 2 Leg 130mm (Pair)
2x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.37kg (84.59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 170mm (7")
Shipping Weight:
Weight: 39kg (86lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
