FRONT RUNNER Expedition Rail Kit - Sides - For 2166Mm...
$213.30
$237.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 11 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 11 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2046mm (80.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.6kg (7.9lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2368Mm...
$267.30
$297.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 12 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 12 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2248mm (88.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.87kg (8.5lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2570Mm...
$274.50
$305.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 13 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 13 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardware
Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2450mm(96.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.27kg (9.4lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2772Mm...
$318.60
$354.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 14 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 14 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:10x Tubular rails2x Cast LH drop downs2x Cast RH drop downs8x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2652mm (104.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.6kg (10.1lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 752Mm...
$159.30
$177.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 4-7 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit works with 7 Slat-long Front Runner Slimline II Roof Racks. If you would like to fit this kit to a rack with slats ranging from 4-6 slats, some cutting of the side rail tubing may be necessary, see the fitting instructions for further details.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:4x Tubular rails2x Cast LH drop downs2x Cast RH drop downs2x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1236mm (48.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.14kg (4.7lbs)
FRONT RUNNER Expedition Rails - Middle Kit - KRXX001
$181.80
$202.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to convert 2 Front Runner Expedition Rail Front or Rear Kits into a Full Perimeter rail kit.
The Front Runner Expedition Rail - Middle Kit allows easy conversion to a full perimeter, safari style, basket shaped roof rack. Designed as an upgrade for owners of 2 Front Runner Expedition Rail - Front or Rear kits.•Install in minutes.•No drilling required.•Adds extra cargo support.•Attractive, low profile design.•Mounting hardware included.•Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.•Manufactured in corrosion resistant high density aluminum components.The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.PLEASE NOTE: the Front Runner Expedition Rail - Middle Kit only works in conjunction with 2 Front Runner Expedition Rail - Front or Rear Kits and is used to create a Full Perimeter rail.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1x RRAC070 - Expedition Tubing Mid Section (700mm)3x RRAC073 - Expedition Rail Joiner PairMaterials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubingWeight:2,8kg (6lbs)
FRONT RUNNER Ford Bronco (2021-Current) Side Mount Ladder - LAFB001
$261.00
$290.00
Get set for super quick and easy access to your gear on the Slimline II Roof Rack with this strong Ford Bronco Side Mount Ladder. You can now add or remove all types of gear to or from your rack with ease.
This ladder installs into the side profile channel of your Slimline II roof rack and is secured to the body of Ford Bronco between the fiberglass roof and the vehicle's body.
Suitable for the 2 door and 4 door models.
The ladder has 3 rungs.
Made of black powder-coated high-strength steel for maximum durability and strength.
Fitment guide and installation hardware included.
This ladder has a maximum load rating of 110kg/242.5lbs.
Drilling is required for installation.
Consists of:1 x Ford Bronco Side Ladder Installation HardwareFitting InstructionsMaterials used:Black powder-coated steel and aluminumProduct Dimensions:665mm (26.2") L x 243mm (9.6") W x 254mm (10") HWeight:3.4kg (7.5lbs)Load Rating: 110kg (242.5lbs)
FRONT RUNNER Fiat Ducato (L1H1/118In Wb/Low Roof) (2014-Current) Slimpro Van...
$2,101.50
$2,335.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L1H1/118" WB) low roof vans with a vehicle length of 4963mm / 195.4".
Load-carrying area: 2570mm (101.2") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm1x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 30.99kg (68.32lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 35.35kg (78lbs)
FRONT RUNNER Fiat Ducato (L2H1/136In Wb/Low Roof) (2014-Current) Slimpro Van...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L2H1/136" WB) low roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.35kg (80lbs)
FRONT RUNNER Fiat Ducato (L2H2/136In Wb/High Roof) (2014-Current) Slimpro Van...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L2H2/136" WB) high roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.35kg (80lbs)
FRONT RUNNER Fiat Ducato (L4H2/159In Wb/High Roof) (2014-Current) Slimpro Van...
$2,692.80
$2,992.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L3H2/159" WB) high roof vans with a vehicle length of 5998mm / 236.1".
Load-carrying area: 3580mm (141") x 1565mm (61.6").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:4x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)2x SPVT004 - Van Rack Side Profile / 1762mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:3580mm (141") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 40.94kg (90.26lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 44.35kg (98lbs)
FRONT RUNNER Fiat Ducato (L5H2/159In Wb/High Roof) (2014-Current) Slimpro Van...
$2,837.70
$3,153.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L5H2/159" WB) high roof vans with a vehicle length of 6363mm / 250.5".
Load-carrying area: 3928mm (154.6") x 1565mm (61.6").
Ten (10) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:5x FAVF002 - FPCR Foot Set - by Front Runner2x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm2x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:3928mm (154.6") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 42.17kg (92.97lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 46.35kg (102lbs)
FRONT RUNNER Fiat Fullback (2016-Current) Slimline Ii Roof Rack Kit...
$1,370.70
$1,523.00
Take your Fiat Fullback (2016-2019) on new adventures with this Slimline II Roof Rack Kit. The full-sized rack helps clear interior space and gives even more cargo-carrying ability for your adventure gear and toys.
This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Fiat Fullback. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAMT001 - Mitsubishi Triton/L200 / 5th Gen Foot Rails1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.26kg (62.3lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 250mm (10")Shipping Weight:Weight: 27.8kg (61lbs)
FRONT RUNNER Ford Bronco (1966-1977) Slimline Ii Roof Rack Kit...
$2,172.60
$2,414.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Bronco contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Bronco contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:
4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 455mm (18")Length 1610mm (63")Height 250mm (10")
Shipping Weight:
Weight 39.1kg (86.0lbs)
FRONT RUNNER Ford Bronco 2 Door (2022-Current) Slimline Ii Roof...
$2,306.70
$2,563.00
Introducing our tough Slimline II Cargo Roof Rack Kit: an 85.3" Slimline II Tray, Wind Deflector, and 4 Foot Rails for precision mounting. Our sturdy racks will allow you to adventure confidently in your iconic Ford Bronco.
This 2166mm/85.3” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and a set of four (4) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFB004 - Ford Bronco 2 Door (2022-Curr) Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 39.26kg (86.55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 290mm (11")
Shipping Weight:Weight: 46kg (101lbs)
FRONT RUNNER Ford Bronco 4 Door W/Hard Top (2021-Current) Slimline...
$2,478.60
$2,754.00
Turn your Ford Bronco 4 Door into the ultimate adventure truck with this Slimline II Roof Rack Kit. This highly versatile and durable rack was designed specifically for the four-door with a hard top. It boasts a unique modular design that allows you to customize it with a range of purpose-built accessories to suit your load-hauling, travel and adventure-sports lifestyle.
This 2570mm/101” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector, front Foot Rails that fit to the factory accessory mounting points on the top of the windshield frame and the rear rails that clamp on using the rear factory clamp points to mount the Slimline II Tray.
No drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails allow for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allows the fitment of a Table that mounts under the rear of the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFB002 - Ford Bronco 4D w/Hard Top (2021-Curr) Foot Rails1x RRSTD13 - SLII Tray - 1255mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.78kg (100.93lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 290mm (11")Shipping Weight:Weight: 51kg (112lbs)
FRONT RUNNER Ford Dc (2012-2022) Slimline Ii Roof Rack Kit...
$1,373.40
$1,526.00
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford DC contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford DC contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FASS024 - Foot Set / 50mm - 60mm1x FASS014 - Foot Set - Angled / 65mm1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.11kg (55.36lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 28.43kg (63lbs)
FRONT RUNNER Ford E150/E250/E350 Extended Cab (1992-2014) Slimline Ii 3/4...
$3,138.30
$3,487.00
Turn your heavy duty van into the ultimate adventuremobile with the Ford E150/E250/E350 Extended Cab Slimline II 3/4 Roof Rack Kit. Mount your adventure gear on 3/4 of the roof so you can always have enough interior space to work or play.
Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x LASP104 - No 4 Plus Leg 180mm (Pair)4x LASS027 - Leg Spacer 6mm (Pair)2x LASS103 - No 3 Leg 155mm (Pair)2x LASS104 - No 4 Leg 170mm (Pair)1x RRSTP14 - SLII Tray - 1575mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 53.08kg (117.02lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 53.8kg (118lbs)
FRONT RUNNER Ford E150/E250/E350 Extended Cab (1992-2014) Slimline Ii Roof...
$4,233.60
$4,704.00
Turn your heavy duty van into the ultimate adventuremobile with the Ford E150/E250/E350 Extended Cab Slimline II Roof Rack Kit. Mount your adventure gear on the roof so you can always have enough interior space to work or play.
This 3524mm/138.7" long, full size , Slimline II cargo carrying roof rack kit for your Ford E150/E250/E350 Extended Cab contains the Slimline II Tray and Wind Deflector, as well as 12 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x LASP104 - No 4 Plus Leg 180mm (Pair)5x LASS027 - Leg Spacer 6mm (Pair)3x LASS103 - No 3 Leg 155mm (Pair)2x LASS104 - No 4 Leg 170mm (Pair)2x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 36.77kg (81.06lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 43.8kg (96lbs)
FRONT RUNNER Ford Everest (2015-2021) Slimline Ii Roof Rack Kit...
$1,871.10
$2,079.00
This 1762mm/69.4” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
This 1762mm/69.4” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFE001 - Ford Everest (2015-2021) Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.47kg (82.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 37.6kg (83lbs)