MSA Mazda Bt50 Front Twin Buckets (Airbag Seats) + Console...
$458.10
$509.00
Model: Mazda BT50 Series 2 Freestyle XT 05/15 - 12/16
FRONT RUNNER Toyota Tacoma 3Rd Gen (2015-2023) Cab Over Camper...
$782.10
$869.00
Get your Toyota Tacoma ready for cargo-carrying duties and adventures with this modular and lightweight roof rack. The kit consists of Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the tray to your Tacoma. The rack is compatible with over 55 accessories tailored to various sports, camping and overland gear.
This 550mm/21.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tacoma. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
KRTT011T - Toyota Tacoma 3rd Gen (2015-2023) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FATT011 - Toyota Tacoma 3rd Gen (2015-2023) Contour Rails
1x RRSTD03 - SLII Tray - 1255mm(W)X550mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 12.47kg (27.49lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 18kg (40lbs)
FRONT RUNNER Chevrolet Silverado 3Rd/4Th Gen (2013-Current) Cab Over Camper...
$1,052.10
$1,169.00
Ensure your Chevrolet Silverado can comfortably carry extra gear on top of the cab by fitting this Front Runner Rack Kit that includes a Slimline II Rack Tray, wind deflector and 2 Cab Over Camper Rails. Your Silverado is now rack-ready for any adventure.
This 752mm/29.6” long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Cab Over Camper Rails to mount the Slimline II Tray to your Chevrolet Silverado 3rd/4th Gen. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FACS004 - Chev Silverado 3rd & 4th gen Shorty foot rails1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 17.04kg (37.57lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")Shipping Weight:Weight: 24kg (53lbs)
FRONT RUNNER Chevrolet Colorado /Gmc Canyon Zr2 2Nd Gen (2015-2022)...
$984.60
$1,094.00
Need external cargo carrying capacity for your Chevrolet Colorado /GMC Canyon ZR2 with the Cab Over Camper? Then look no further than the Slimline II Roof Rack Kit, which includes a tray, wind deflector and foot rails.
This 752mm/29.6” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado/GMC Canyon ZR2 2nd Gen. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCC012T - Chevrolet Colorado /GMC Canyon ZR2 2nd Gen (2015-2022) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:1x FACC005 - Chev Colorado/GMC Canyon (15-22)ZR2 Shorty Foot1x RRSTD04 - SLII Tray - 1255mm(W)X752mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 14.75kg (32.52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 280mm (11")
Shipping Weight:Weight: 20kg (44lbs)
FRONT RUNNER 4 Wolf Pack Pro Storage System Kit /...
$1,125.00
$1,250.00
This convenient narrow storage solution means your vehicle can cleverly store 4 Wolf Pack Pro boxes in style. It’s been designed for interior vehicle use or in the covered load bed of a pick-up and takes only minutes to install, and then you can easily slide your storage boxes in and out. The carpeted deck holds up to 80kg / 176.4 lbs and is perfect for fridge/cargo slides. Includes four clip-to-close, stackable, and durable Wolf Pack Pro storage boxes.
This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The deck is covered with a durable, UV resistant nylon pile carpet.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.
FRONT RUNNER 4 Wolf Pack Pro Storage System / Narrow...
$881.10
$979.00
This convenient narrow storage solution means your vehicle can cleverly store 4 Wolf Pack Pro boxes in style. It’s been designed for interior vehicle use or in the covered load bed of a pick-up and takes only minutes to install, and then you can easily slide your storage boxes in and out. The carpeted deck holds up to 80kg and is perfect for fridge/cargo slides.
This storage system includes 1 storage unit, top deck, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The deck is covered with a durable, UV resistant nylon pile carpet.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Storage unit2 X Wood decks with carpetInstallation hardwareFitting instructions
Materials used:Black powder-coating high strength steel and alumimiunNylon carpetWood
Product Dimensions:1081mm (42.6") L x 921mm (36.3") W x 313mm (12.3") H
Weight:35.3Kg (77.8lbs)
Load Rating: 80kg (176.4lbs) top deck load capacity
FRONT RUNNER 4 Wolf Pack Pro Storage System / Asymmetric...
$859.50
$955.00
This smart, asymmetrical storage solution enables your vehicle to house your 4 Wolf Pack Pro boxes. It takes minutes to install, and then you can slide your Wolf Pack Pro boxes into place. This system is spring-loaded so that the boxes won’t vibrate or move excessively. The clean bamboo deck can hold a max weight of 80 kg and is perfect for your fridge and slide.
This storage system includes 1 storage unit, top deck , brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.Note: Wolf Pack Pros are sold separately.Wolf Pack Pro Hi-Lids are not compatible with this storage system.
Consists of:1 x Storage Unit2 x Top DecksInstallation HardwareFitting Instructions
Materials used:Black powder-coated aluminium and steel
Product Dimensions:971mm (38.2") L x 971mm (38.2") W x 310mm (12.2") H
Weight:36kg (79.4lbs)
Special Note:80kg (176.4lbs) top deck load capacity
GME 406Mhz Gps Personal Locator Beacon - Australia - MT610GAUS
$429.00
Includes a free Carry Case (CC610) valued at $30 (Black Friday Exclusive)
Introducing the all-new Australian Made 406MHz GPS Personal Locator Beacon from GME, the MT610G.
MT610GAUS Personal Locator Beacon (PLB) is GME’s most compact and lightweight design ever, complementing our market-leading range of Emergency Beacon products.
The GME MT610GAUS is a super-compact, lightweight PLB, offering an impressive 7-year battery life and a 6-year warranty. Featuring a ‘Non-Hazmat’ battery pack for ease of transport, the MT610GAUS ensures you remain safe and connected, wherever life takes you.
The GME MT610GAUS has been designed, engineered, and manufactured in Australia, to provide the outdoor adventurer or lone worker with a GPS PLB solution that is compact, easy to use, and affordable.
Featuring an integrated 72-channel GPS receiver, zero warm-up time, high-intensity LEDs, IP68 Ingress Protection, and an inherently buoyant design, the compact size of the MT610GAUS has not compromised the safety features included.
Features:
Compact, Lightweight DesignIP68 Ingress ProtectionIntegrated 72Ch GPS Receiver7 Year Battery Life121.5MHz Homing TransmitterCospas-Sarsat Certified (Class 2)Easily Deployed in an EmergencyInherently Buoyant
What's in the box?
GPS Personal Locator Beacon (MT610G)Safety LanyardInstruction ManualQuick-start GuidePart Number: MT610GAUS
TRED Pro Recovery Boards Red - TREDPROR
$349.00
TRED Pro is the gold standard of recovery boards designed for the serious adventurer who eats, sleeps, and breathes exploring.
TRED Prois the next generation of the world's most advanced all-in-one off-road vehicle recovery boards. It's specifically designed to get your 4WD, ATV, and equipment out of seriously adventurous trouble when traction is lost in sand, mud or snow. Developed and manufactured in Australia, TRED Proout-performs any other traction aid in the market allowing you to explore with confidence whatever the terrain.
Please note: TRED Prorecovery boards are sold in a pair (one set).
FEATURES:
EXOTRED
Unparalleled and patented dual composite construction provides superior strength, durability and wear-resistance to the board's Grip Nodules. As a result, the EXOTRED will not suffer instant catastrophic damage as has been experienced with other recovery ramp products under wheelspin.
MADE TO LAST
Engineered with a special nylon material blend to flex under pressure and be wear resistant.
SIPE-LOCK
Distinct patented grip profile developed from real data and engineered to engage with the water evacuation channels on the outer edges of tires aka "sipes'.
MADE FOR EVERY SEASON
Optimized design and product development to help you recover from sand, mud, and snow.
PROGRESSIVE VARIABLE TOOTH DESIGN
Improved tooth distribution and design based on research of hundreds of tire manufacturer's tread patterns for maximum traction to create an effortless escape.
DEDICATED ENTRY AND EXIT POINTS
With a directional recovery board, we're able to design the nodule's profile to better grip the tyre's profile and allow it to conform to the terrain.
LIFETIME WARRANTY
The world's first non-mechanical solo off road vehicle recovery device with a lifetime warranty!
IMPROVED FEATURES
Ergonomic improvements to the shovel and handles, plus a new contour ramp for maximum grip, comfort, and control to clear debris & obstructions.
DUAL COLOR TONE
Stealth mode engaged with stealth black teeth across the board.
DIMENSIONS:
Single Unit Dimensions
Length - 1160 mm (45.67 inches)
Width - 330 mm (12.99 inches)
Height - 65 mm (2.56 inches)
Nested / Stacked Height
(one set/pair)
85 mm (3.35 inches)
Weight
TRED Pro (pair)
weighs 8.2kgs (18.08 pounds)
TRED Pro Recovery Boards Blue - TREDPROBU
$349.00
TRED Pro is the gold standard of recovery boards designed for the serious adventurer who eats, sleeps, and breathes exploring.
TRED Prois the next generation of the world's most advanced all-in-one off-road vehicle recovery boards. It's specifically designed to get your 4WD, ATV, and equipment out of seriously adventurous trouble when traction is lost in sand, mud or snow. Developed and manufactured in Australia, TRED Proout-performs any other traction aid in the market allowing you to explore with confidence whatever the terrain.
Please note: TRED Prorecovery boards are sold in a pair (one set).
FEATURES:
EXOTRED
Unparalleled and patented dual composite construction provides superior strength, durability and wear-resistance to the board's Grip Nodules. As a result, the EXOTRED will not suffer instant catastrophic damage as has been experienced with other recovery ramp products under wheelspin.
MADE TO LAST
Engineered with a special nylon material blend to flex under pressure and be wear resistant.
SIPE-LOCK
Distinct patented grip profile developed from real data and engineered to engage with the water evacuation channels on the outer edges of tires aka "sipes'.
MADE FOR EVERY SEASON
Optimized design and product development to help you recover from sand, mud, and snow.
PROGRESSIVE VARIABLE TOOTH DESIGN
Improved tooth distribution and design based on research of hundreds of tire manufacturer's tread patterns for maximum traction to create an effortless escape.
DEDICATED ENTRY AND EXIT POINTS
With a directional recovery board, we're able to design the nodule's profile to better grip the tyre's profile and allow it to conform to the terrain.
LIFETIME WARRANTY
The world's first non-mechanical solo off road vehicle recovery device with a lifetime warranty!
IMPROVED FEATURES
Ergonomic improvements to the shovel and handles, plus a new contour ramp for maximum grip, comfort, and control to clear debris & obstructions.
DUAL COLOR TONE
Stealth mode engaged with stealth black teeth across the board.
DIMENSIONS:
Single Unit Dimensions
Length - 1160 mm (45.67 inches)
Width - 330 mm (12.99 inches)
Height - 65 mm (2.56 inches)
Nested / Stacked Height
(one set/pair)
85 mm (3.35 inches)
Weight
TRED Pro (pair)
weighs 8.2kgs (18.08 pounds)
TRED Hd Compact Recovery Boards Fluro Green - TREDCPHDGR
$199.00
The TRED HD is the ultimate recovery board for the off-road enthusiast whose trips demand exceptional quality gear.
TRED HD is made from a high-quality custom blend engineered Nylon enabling high levels of flex while delivering superior strength and durability. The mix of elasticity and tough rigid design in the main body means that the TRED HD will maintain a high level of pressure on your tire to provide ultimate traction whilst still being able to take the flex from the vehicle's weight on unstable and uneven ground. TRED HD's special all season formulation will aid you all year round in ambient temperatures from -15C (5F) to 70C (158F).
Please note. TRED HD recovery boards are sold in a pair (one set).
FEATURES:
MADE TO LAST
Expertly engineered with Nylon formulation
SIPE-LOCK
Distinct patented grip profile developed from real data and engineered to engage with the water evacuation channels on the outer edges of tires aka "sipes'
MADE FOR EVERY SEASON
Whether it's sand, mud, or snow, the optimized design and product development of TRED HD Compacts will get you out of a tough spot.
LIFETIME WARRANTY
The world's first non-mechanical solo off road vehicle recovery device with a Lifetime Warranty!
TRED-LINK
Nest your TRED GT or TRED HD Compact recovery boards from entry ramp to shovel end, to give a potentially limitless recovery surface without the need for additional joiners.
ONE-OF-A-KIND FEATURES
Ergonomic features to the shovel and handles, plus a contour ramp for maximum grip, comfort, and control to clear debris & obstructions
DEDICATED ENTRY AND EXIT POINTS
With a directional recovery board we're able to design the nodule's profile to better grip the tyre's profile and allow it to conform to the terrain.
PROGRESSIVE VARIABLE TOOTH DESIGN
Improved tooth distribution and design based on research of hundreds of tire manufacturer's tread patterns for maximum traction to create an effortless escape.
CONCAVE/CONVEX PROFILE
Get better surface contact to the vehicle's tires for optimum initial traction and recovery ease. The convex board design conforms to the direction of the terrain as you roll out of the hole your tires and vehicle are in.
DIMENSIONS:
Single Unit Dimensions
Length - 790 mm (31.10 inches)
Width - 310 mm (12.20 inches)
Height - 62 mm (2.45 inches)
Nested / Stacked Height
(one set/pair)
84 mm (3.31 inches).
Weight
TRED HD Comapct (pair)
weighs 5kgs (11 pounds)
TRED Hd Compact Recovery Boards Black - TREDCPHDBK
$199.00
The TRED HD is the ultimate recovery board for the off-road enthusiast whose trips demand exceptional quality gear.
TRED HD is made from a high-quality custom blend engineered Nylon enabling high levels of flex while delivering superior strength and durability. The mix of elasticity and tough rigid design in the main body means that the TRED HD will maintain a high level of pressure on your tire to provide ultimate traction whilst still being able to take the flex from the vehicle's weight on unstable and uneven ground. TRED HD's special all season formulation will aid you all year round in ambient temperatures from -15C (5F) to 70C (158F).
Please note. TRED HD recovery boards are sold in a pair (one set).
FEATURES:
MADE TO LAST
Expertly engineered with Nylon formulation
SIPE-LOCK
Distinct patented grip profile developed from real data and engineered to engage with the water evacuation channels on the outer edges of tires aka "sipes'
MADE FOR EVERY SEASON
Whether it's sand, mud, or snow, the optimized design and product development of TRED HD Compacts will get you out of a tough spot.
LIFETIME WARRANTY
The world's first non-mechanical solo off road vehicle recovery device with a Lifetime Warranty!
TRED-LINK
Nest your TRED GT or TRED HD Compact recovery boards from entry ramp to shovel end, to give a potentially limitless recovery surface without the need for additional joiners.
ONE-OF-A-KIND FEATURES
Ergonomic features to the shovel and handles, plus a contour ramp for maximum grip, comfort, and control to clear debris & obstructions
DEDICATED ENTRY AND EXIT POINTS
With a directional recovery board we're able to design the nodule's profile to better grip the tyre's profile and allow it to conform to the terrain.
PROGRESSIVE VARIABLE TOOTH DESIGN
Improved tooth distribution and design based on research of hundreds of tire manufacturer's tread patterns for maximum traction to create an effortless escape.
CONCAVE/CONVEX PROFILE
Get better surface contact to the vehicle's tires for optimum initial traction and recovery ease. The convex board design conforms to the direction of the terrain as you roll out of the hole your tires and vehicle are in.
Dimensions:
Single Unit Dimensions
Length - 790 mm (31.10 inches)
Width - 310 mm (12.20 inches)
Height - 62 mm (2.45 inches)
Nested / Stacked Height
(one set/pair)
84 mm (3.31 inches).
Weight
TRED HD Comapct (pair)
weighs 5kgs (11 pounds)
TRED Gt Compact Recovery Boards Red - TREDCPGTR
$159.00
The TRED GT Recovery Board is made for the traveller who wants to explore with confidence.
Constructed using high-quality automotive-grade polypropylene, TRED GT delivers superior strength, impact resistance and durability. With a material formulation that performs all year round in ambient temperatures from 0C (32F) to 55C (131F) and a tough rigid design profile, TRED GT provides great reliability and performance in any off-road recovery situation.
Please note: TRED GT recovery boards are sold in a pair (one set).
FEATURES:
MADE TO LAST
Constructed using high quality automotive grade Polypropylene
SIPE-LOCK
Distinct patented grip profile developed from real data and engineered to engage with the water evacuation channels on the outer edges of tires aka "sipes'
MADE FOR EVERY SEASON
Optimized design and product development to help you recover from sand, mud, and snow
LIFETIME WARRANTY
The world's first non-mechanical solo off road vehicle recovery device with a Lifetime Warranty!
TRED-LINK
Nest your TRED GT or TRED HD compact recovery boards from entry ramp to shovel end, to give a potentially limitless recovery surface without the need for additional joiners.
PROGRESSIVE VARIABLE TOOTH DESIGN
Improved tooth distribution and design based on research of hundreds of tire manufacturer's tread patterns for maximum traction to create an effortless escape.
ONE-OF-A-KIND FEATURES
Ergonomic features to the shovel and handles, plus a contour ramp for maximum grip, comfort, and control to clear debris & obstructions
CONCAVE RAMP
Get better surface contact to the vehicle's tires for optimum initial traction and recovery ease.
CONVEX PROFILE
The convex board design conforms to the direction of the terrain as you roll out of the hole your tires and vehicle are in.
DIMENSIONS:
Single Unit Dimensions
Length - 790 mm (31.10 inches)
Width - 310 mm (12.20 inches)
Height - 62 mm (2.45 inches)
Nested / Stacked Height
(one set/pair)
84 mm (3.31 inches)
Weight
TRED GT Compact (pair)
weighs 3.90kgs (8.60 pounds)
TRED Gt Recovery Board Storage Bag - TRBSB
$139.95
TRED GT Recovery Board Storage Bags have been carefully designed for strength, durability and ease of use.
The TRED Recovery Board Storage Bag is perfectly designed to fit 2 to 4 full sized TRED Pro, HD or GT Recovery Boards.
With a handy expansion zipper, the TRED Recovery Board Storage Bag can be down/upsized to accommodate the contents stored. The TRED Recovery Board Storage Bag has double, centred handles with connector tab, for easy grab-and-go convenience.
Made with PVC outer and state-of-the art Cordura lining for durability and easy cleaning, this handy storage bag is the perfect alternative to vehicle-mounting.
The TRED Recovery Board Storage Bag will keep your recovery boards safe, clean, dry and ready for your next adventure.
TRED Hd Recovery Device Silver - TREDHDSI
$299.00
The TRED HD Recovery Boards are the ultimate recovery board for the off-road enthusiast whose trips demand exceptional quality gear.
TRED HD Recovery Boards are made from a high-quality custom blend Engineered Nylon enabling high levels of flex while delivering superior strength and durability. The mix of elasticity and tough rigid design in the main body means that the TRED HD will maintain a high level of pressure on your tire to provide ultimate traction whilst still being able to take the flex from the vehicle’s weight on unstable and uneven ground. TRED HD’s special all season formulation will aid you all year round in ambient temperatures from -15°C (5°F) to 70°C (158°F).
Please note. TRED HD recovery boards are sold in a pair (one set).
TRED Gt Kinetic Rope 8200Kg - TR8KR
$179.00
TRED GT 8,200KG Kinetic Rope.
8,200KG minimum breaking strength 9 meters long. TRED GT Kinetic Ropes are constructed using high quality Nylon 66 and offer up to 30% elongation. After assembly, each TRED GT rope is coated in a UV treatment.
TRED GT Kinetic Ropes feature a highly durable vinyl polymer-coated eyelets for extra protection to critical parts when in use
TRED GT Kinetic Ropes use the kinetic energy generated during use to help in removing a stranded vehicle. The combination of the recovery vehicle pull and the tension in the rope creates a ‘snatching’ effect that can pull a vehicle free from being stuck or unable to move itself. When used in accordance with these guidelines, vehicles may be recovered with minimal risk of injury to people, or damage to vehicles or equipment.
It is very important to use the correct recovery rope. A rope with a ‘too light” breaking strength may break under load. A rope with a ‘too heavy’ breaking strength may not be stretched properly and more stress will be placed on the recovery points, possibly causing damage or injury. The minimum breaking strength of the rope should be between two and three times the GVM of the ‘lighter’ of the two vehicles used in the recovery process. Please note that the recovery rope will be under greater load if the vehicle is bogged in mud, sand or heavily loaded. If the GVM is not stated on the identification plate of a vehicle or its registration certificate, it could be available from the owner’s handbook or from the vehicle manufacturer.
Local NATA laboratory tested to ensure TRED quality standards are met and exceeded.
TRED 12,500Kg Gt Kinetic Rope - TR12KR
$209.00
12|500KG minimum breaking strength 9 meters long. TRED GT Kinetic Ropes are constructed using high quality Nylon 66 and offer up to 30% elongation. After assembly| each TRED GT rope is coated in a UV treatment.
TRED GT Kinetic Ropes feature a highly durable vinyl polymer-coated eyelets for extra protection to critical parts when in use
TRED GT Kinetic Ropes use the kinetic energy generated during use to help in removing a stranded vehicle. The combination of the recovery vehicle pull and the tension in the rope creates a ‘snatching’ effect that can pull a vehicle free from being stuck or unable to move itself. When used in accordance with these guidelines| vehicles may be recovered with minimal risk of injury to people| or damage to vehicles or equipment.
It is very important to use the correct recovery rope. A rope with a ‘too light” breaking strength may break under load. A rope with a ‘too heavy’ breaking strength may not be stretched properly and more stress will be placed on the recovery points| possibly causing damage or injury. The minimum breaking strength of the rope should be between two and three times the GVM of the ‘lighter’ of the two vehicles used in the recovery process. Please note that the recovery rope will be under greater load if the vehicle is bogged in mud| sand or heavily loaded. If the GVM is not stated on the identification plate of a vehicle or its registration certificate| it could be available from the owner’s handbook or from the vehicle manufacturer.
MAXTRAX Xtreme Turquoise - MTXXTQ
$519.00
MAXTRAX XTREME - the world's best 4WD recovery tracks just got better!Multi-award-winning MAXTRAX XTREME is the most advanced 4WD recovery track ever created, featuring 88 replaceable hard-anodised alloy teeth moulded into a heavy-duty, super-tough, engineering-grade reinforced Nylon recovery track. MAXTRAX XTREME is designed and manufactured for professional use based on direct feedback from some of the world's most elite military units, off-road racing champions, certified 4WD driver trainers and globe-trotting expedition leaders as a mission-critical recovery track for a wide range of scenarios where time is of the essence and aggressive driving and excessive wheel spin is often unavoidable, including active combat situations, timed motorsport competitions and remote area expeditions.
MAXTRAX XTREME is manufactured in Australia using our secret recipe; a heavy-duty, super-tough, engineering-grade reinforced Nylon; the same amazing material that weve made MAXTRAX MKII from for almost a decade. The manufacturing process involves a custom jig attached to a robot arm inserting the 88 alloy teeth in the correct orientation into special sockets in the injection mould, then over-moulding them into the body of the track, ensuring that the Nylon material conforms closely to the thread of each tooth for a super-secure fit, virtually eliminating the risk of a tooth unwinding from the body of the track. All 88 alloy teeth are hard-anodised to protect against corrosion in harsh, salt water or muddy environments.
As the alloy is significantly harder and more durable than the rubber compound found in tyres and also more resistant to wear from a spinning tyre than any polymer available today, you can expect faster, more secure engagement with the tyre's tread pattern, which not only makes MAXTRAX XTREME the most-durable recovery track on the market, but also the fastest.MAXTRAX XTREME is also easily repairable in the field. If a tooth gets damaged, simply flip the board over and use a T-50 Torx bit to remove and replace the damaged tooth. MAXTRAX XTREME uses a proprietary and patent-pending thread & bliplock system to ensure secure physical engagement of a new tooth with its recess after replacement. Replacement teeth and a custom T-head tool which also works with our mounting pins will soon be available on our website.MAXTRAX XTREME will nest with MAXTRAX MKII recovery tracks, (although there is a slightly larger space between the tracks due to the design of the underside of the MAXTRAX XTREME).
Mounting pins designed exclusively for the MAXTRAX XTREME are now available, including a hybrid mounting pin designed for those adding a set of MAXTRAX XTREME to the top of their current MKII recovery tracks.MAXTRAX XTREME is also compatible with MAXTRAX mini and our fixing and linking kit to create a portable roadway.
Australian designed, engineered and manufactured
88 replaceable anodised alloy teeth; designed for XTREME users
Safe and easy recovery from sand, mud, snow and slush
Made from super tough engineering-grade reinforced Nylon
Compatible with MAXTRAX MKII and MAXTRAX mini
Proven, patent-pending, multi-award-winning design
Weight: 9kg/20lbs per pair
Six glove-friendly handles
Lifetime warranty
A variety of mounting and carrying options are available
Colour: Turquoise Please note: Actual colour may vary slightly from images shown.
MAXTRAX Xtreme Red - MTXXFJR
$519.00
MAXTRAX RED XTREME - the world's best 4WD recovery tracks just got better!Multi-award-winning MAXTRAX XTREME is the most advanced 4WD recovery track ever created, featuring 88 replaceable hard-anodised alloy teeth moulded into a heavy-duty, super-tough, engineering-grade reinforced Nylon recovery track. MAXTRAX XTREME is designed and manufactured for professional use based on direct feedback from some of the world's most elite military units, off-road racing champions, certified 4WD driver trainers and globe-trotting expedition leaders as a mission-critical recovery track for a wide range of scenarios where time is of the essence and aggressive driving and excessive wheel spin is often unavoidable, including active combat situations, timed motorsport competitions and remote area expeditions.
MAXTRAX XTREME is manufactured in Australia using our secret recipe; a heavy-duty, super-tough, engineering-grade reinforced Nylon; the same amazing material that weve made MAXTRAX MKII from for almost a decade. The manufacturing process involves a custom jig attached to a robot arm inserting the 88 alloy teeth in the correct orientation into special sockets in the injection mould, then over-moulding them into the body of the track, ensuring that the Nylon material conforms closely to the thread of each tooth for a super-secure fit, virtually eliminating the risk of a tooth unwinding from the body of the track. All 88 alloy teeth are hard-anodised to protect against corrosion in harsh, salt water or muddy environments.
As the alloy is significantly harder and more durable than the rubber compound found in tyres and also more resistant to wear from a spinning tyre than any polymer available today, you can expect faster, more secure engagement with the tyre's tread pattern, which not only makes MAXTRAX XTREME the most-durable recovery track on the market, but also the fastest.MAXTRAX XTREME is also easily repairable in the field. If a tooth gets damaged, simply flip the board over and use a T-50 Torx bit to remove and replace the damaged tooth. MAXTRAX XTREME uses a proprietary and patent-pending thread & bliplock system to ensure secure physical engagement of a new tooth with its recess after replacement. Replacement teeth and a custom T-head tool which also works with our mounting pins will soon be available on our website.MAXTRAX XTREME will nest with MAXTRAX MKII recovery tracks, (although there is a slightly larger space between the tracks due to the design of the underside of the MAXTRAX XTREME).
Mounting pins designed exclusively for the MAXTRAX XTREME are now available, including a hybrid mounting pin designed for those adding a set of MAXTRAX XTREME to the top of their current MKII recovery tracks.MAXTRAX XTREME is also compatible with MAXTRAX mini and our fixing and linking kit to create a portable roadway.
Australian designed, engineered and manufactured
88 replaceable anodised alloy teeth; designed for XTREME users
Safe and easy recovery from sand, mud, snow and slush
Made from super tough engineering-grade reinforced Nylon
Compatible with MAXTRAX MKII and MAXTRAX mini
Proven, patent-pending, multi-award-winning design
Weight: 9kg/20lbs per pair
Six glove-friendly handles
Lifetime warranty
A variety of mounting and carrying options are available
Colour: Red Please note: Actual colour may vary slightly from images shown.
MAXTRAX Mini Pair Black - MTXMPB
$209.00
MAXTRAX is the lightweight, easy-to-use vehicle recovery and extraction device thats easily carried by almost anything with four-wheels ensuring an easy way out if your vehicle becomes stuck.
MAXTRAX now brings you the MAXTRAX mini, still made from the same super-tough engineering-grade reinforced Nylon with a size suited to smaller vehicles or those with limited cargo space.
MAXTRAX mini takes the drama out of getting stuck. The aggressive large cleats on MAXTRAX mini sink their teeth into the tyre tread and the terrain under your ATV, UTV, SUV or 4WD vehicle to prevent it from slipping back into mud, snow, or sand and make vehicle recovery quick and easy.
MAXTRAX Mini smaller size measuring just 640mm long X 330mm wide x 85mm tall (25 inches long X 13 inches wide), each set of MAXTRAX Mini stacks together at a height of just 85mm (3.5 inches). MAXTRAX stows easily with the rest of your car camping, overlanding, or four-wheel drive touring gear.
Made of UV-stabilised, flexible, super toughengineering-grade reinforced nylon, MAXTRAX provides traction and a firm base to get your vehicle quickly back on track.
Each MAXTRAX Mini weighs approximately 2 kilograms (4.4 pounds). MAXTRAX is easy to carry and thanks to its signature double-edged design, its easy and quick to manoeuvre under your tyres.
MAXTRAX Mini has two comfortable built-in handles and a shovel at either end for removing excess earth to help get you unstuck quicker. They also have exclusive keyhole accessory points to allow you to securely mount your MAXTRAX Mini.
MAXTRAX Mini can be joined together with all MAXTRAX recovery boards extending their length using the MAXTRAX Fixing & Linking Kit.
Colour: Black Please note: Actual colour may vary slightly from images shown. Shipping: Please provide a physical address as we CANNOT ship to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email the total cost of your order including shipping (International shipping is NOT free).
Warranty: We back our confidence in this quality Australian Made product with a lifetime warranty against faulty materials and workmanship (terms and conditions apply)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
