FATZ FABRICATION Gu Patrol Lh Snorkel. Ram Head, Texture Coated...
$1,460.00
Fatz GU Patrol 4″ Snorkel (All Series)
The Nissan GU Patrol is an icon for modification and performance improvements. With this, there is the need for improved Air flow potential and naturally, a high Air inlet for off road applications. Our Nissan GU Patrol Snorkel is designed as such, allowing for a 4” tube all the way from the snorkel tip to the Airbox inlet. Built with 316 Grade Stainless steel, professionally TIG welded and polished to a seamless 320 grain finish on polished snorkels. Powder coated are built in premium quality 304 grade stainless steel tube and finished to a true seamless form and powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. The snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox in quality silicone and stainless-steel tubing. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately) See separate product listing.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Coupling From Fatz Built Airbox To Factory/Safari Snorkel...
$165.00
GU Patrol 4″ High Flow Airbox
Our GU Patrol 4″ High flow Airbox is a versatile unit with great compatibility in many common set ups. With GU Patrol 4” inlet and outlet, supplied with our Fatz Built filter in your choice of either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, template for enlarging the hole through the inner guard and fitting instructions supplied with the box. The box incorporates a water trap and duck valve drain, to allow water to drain away from the filter when ingested through the snorkel. The box is compatible with dual batteries with no modification to the box or tray. Simply select your plumbing kit (sold separately) to allow fitment with many common Engine combinations such as TD42, ZD30, RD28, LS1-3 etc. Not compatible with TB48 or TB45 without modifications. With an increase in flow from 410CFM with the factory box to Over 850CFM* with our High Flow Airbox, the improvements will be obvious. Supplied in all cases with filter, template for guard hole enlargement, clear lid, fasteners and instructions to fit out.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Additional Plumbing Kit Required To Plumb Fatz Built...
$340.00
Fatz Fabrication Additional plumbing kit required to plumb Fatz Built snorkel to Factory TD48 Airbox.-48-SN-FAB-PL-KT
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Lh Snorkel. Polished. Suit 3.5" Airbox Inlet...
$1,460.00
Fatz GU Patrol 4″ Snorkel (All Series)
The Nissan GU Patrol is an icon for modification and performance improvements. With this, there is the need for improved Air flow potential and naturally, a high Air inlet for off road applications. Our Nissan GU Patrol Snorkel is designed as such, allowing for a 4” tube all the way from the snorkel tip to the Airbox inlet. Built with 316 Grade Stainless steel, professionally TIG welded and polished to a seamless 320 grain finish on polished snorkels. Powder coated are built in premium quality 304 grade stainless steel tube and finished to a true seamless form and powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. The snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox in quality silicone and stainless-steel tubing. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately) See separate product listing.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Lh Snorkel. Powder Coated Satin Black. Suit...
$1,460.00
Fatz GU Patrol 4″ Snorkel (All Series)
The Nissan GU Patrol is an icon for modification and performance improvements. With this, there is the need for improved Air flow potential and naturally, a high Air inlet for off road applications. Our Nissan GU Patrol Snorkel is designed as such, allowing for a 4” tube all the way from the snorkel tip to the Airbox inlet. Built with 316 Grade Stainless steel, professionally TIG welded and polished to a seamless 320 grain finish on polished snorkels. Powder coated are built in premium quality 304 grade stainless steel tube and finished to a true seamless form and powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. The snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox in quality silicone and stainless-steel tubing. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately) See separate product listing.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Lh Snorkel. Polished Finish. Suit 4" Airbox...
$1,460.00
Fatz GU Patrol 4″ Snorkel (All Series)
The Nissan GU Patrol is an icon for modification and performance improvements. With this, there is the need for improved Air flow potential and naturally, a high Air inlet for off road applications. Our Nissan GU Patrol Snorkel is designed as such, allowing for a 4” tube all the way from the snorkel tip to the Airbox inlet. Built with 316 Grade Stainless steel, professionally TIG welded and polished to a seamless 320 grain finish on polished snorkels. Powder coated are built in premium quality 304 grade stainless steel tube and finished to a true seamless form and powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. The snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox in quality silicone and stainless-steel tubing. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately) See separate product listing.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Lh Snorkel. Powder Coated Satin Black. Suit...
$1,460.00
Fatz GU Patrol 4″ Snorkel (All Series)
The Nissan GU Patrol is an icon for modification and performance improvements. With this, there is the need for improved Air flow potential and naturally, a high Air inlet for off road applications. Our Nissan GU Patrol Snorkel is designed as such, allowing for a 4” tube all the way from the snorkel tip to the Airbox inlet. Built with 316 Grade Stainless steel, professionally TIG welded and polished to a seamless 320 grain finish on polished snorkels. Powder coated are built in premium quality 304 grade stainless steel tube and finished to a true seamless form and powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. The snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox in quality silicone and stainless-steel tubing. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately) See separate product listing.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Hdj Series Rh Snorkel. Ram Head. Powder Coated...
$1,460.00
HDJ79 4″ Snorkel.
Compatible with HDJ79 series vehicles, our HDJ79 series 4″snorkel is designed to work in conjunction with our Airbox as well as factory to ensure adequate flow potential for your needs. Built in 316 grade stainless steel and finished to your preference of 320 grain polished finish or powder coated Satin black to match common bar work on the market. In all cases our snorkels are finished to a seamless form, with no evidence of welding visible. Mounting brackets in 3mm Stainless steel picking up on factory mounting locations. 2 remaining mounting locations capped with fasteners. Supplied with stainless steel button head bolts For a professional and clean mounting solution. This snorkel couples to our Fatz Airbox with a straight silicone coupling to ensure a full 4″ of airflow into the airbox. Supplied in all cases with template, edge protector, fasteners and instructions for installation.Snorkel can be coupled with factory airbox with additional adaption kit utilizing Safari Armax inlet duct. Not Compatible with HZJ79/78 Series vehicles.
(COMPATIBLE WITH FACTORY AIRBOX WITH ADDITIONAL PARTS KIT)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION N70 Hilux Airbox. Dry Element Air Filter. Includes...
$1,700.00
N70 1KD Hilux High Flow Airbox package.
The Fatz Built N70 Hilux Airbox is in the line of our latest generation of Airboxes. With All aluminium construction, factory rubber mounting and CNC machined MAF housing, this product will not disappoint. The N70 factory airbox outlet and MAF mounting leaves a lot to be desired form a flow perspective, with a very tight bend at the outlet of the box into the MAF tube. This also makes the integration of the MAF into a different tube with better flow characteristics a little challenging. We have spent a lot of time in testing and development on this product to ensure it is accurate. Our box will not cause any drive-ability or tuning issues. The Box has a 4″ inlet to couple with our snorkel or existing snorkels in the same location. The box is supplied with plumbing to the turbo inlet, for a bolt in, drive away experience, with all needed to fit out. The Airbox has a 10mm thick perspex lid to make filter inspections a breeze. The box houses our 9″ long filter element in either an 8 layer gauze or paper element. Both options well suited for off road applications. With ease of fitment, accuracy in construction and performance to match the quality. You will be happy with you Fatz built N70 Hilux Airbox package.
Supplied with: Airbox, clear lid, filter, MAF housing, Plumbing to turbo inlet, instructions for fit out.
NOT COMPATIBLE WITH SAFARI SNORKEL WITHOUT MODIFICATIONS TO THE AIRBOX
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION N70 Hilux Series Airbox. Oiled Air Filter. Includes...
$1,700.00
N70 1KD Hilux High Flow Airbox package.
The Fatz Built N70 Hilux Airbox is in the line of our latest generation of Airboxes. With All aluminium construction, factory rubber mounting and CNC machined MAF housing, this product will not disappoint. The N70 factory airbox outlet and MAF mounting leaves a lot to be desired form a flow perspective, with a very tight bend at the outlet of the box into the MAF tube. This also makes the integration of the MAF into a different tube with better flow characteristics a little challenging. We have spent a lot of time in testing and development on this product to ensure it is accurate. Our box will not cause any drive-ability or tuning issues. The Box has a 4″ inlet to couple with our snorkel or existing snorkels in the same location. The box is supplied with plumbing to the turbo inlet, for a bolt in, drive away experience, with all needed to fit out. The Airbox has a 10mm thick perspex lid to make filter inspections a breeze. The box houses our 9″ long filter element in either an 8 layer gauze or paper element. Both options well suited for off road applications. With ease of fitment, accuracy in construction and performance to match the quality. You will be happy with you Fatz built N70 Hilux Airbox package.
Supplied with: Airbox, clear lid, filter, MAF housing, Plumbing to turbo inlet, instructions for fit out.
NOT COMPATIBLE WITH SAFARI SNORKEL WITHOUT MODIFICATIONS TO THE AIRBOX
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Snorkel. Ram Head, Texture Coated Satin...
$1,460.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25" snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25" all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Snorkel. Ram Head, Texture Coated Satin...
$1,460.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Snorkel. Polished Finish. Suit 3.25" Airbox...
$1,460.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25″ snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25″ all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Snorkel. Powder Coated Satin Black. Suit...
$1,460.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25" snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25" all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Snorkel. Polished Finish. Suit 4" Airbox...
$1,460.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Snorkel. Powder Coated Satin Black. Suit...
$1,460.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Ram Head, Texture...
$1,460.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Ram Head, Texture...
$1,460.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Dobinson 3.5"I.D Ram Head (Secures To Tube With...
$155.00
Safari 3.5″ Ram head.
3.5″″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
FATZ FABRICATION Ra Raptor 5″ P/C Snorkel. Includes Airbox Adation,...
$2,090.00
RA RAPTOR 5″ Snorkel inc Washer bottle
The Ranger Raptor is a substantial step up in the current generation with power to support the exceptional chassis configuration. The Fatz Built RA RAPTOR 5" snorkel incorporates the true RAPTOR ethos with it's oversized yet refined styling. Our Snorkel is built in 304 Grade Stainless steel tube and finished to a true seamless form through a process developed over the 14 years we have been building snorkels. Then powder coated Satin Black to match common accessories on the market. Fitment is key with the need to align with body panels from any angle. Mounting to the A pillar is secure and robust with 3 M6 Nutcerts mounting the folded bracket.
The RA comes from the factory with the washer bottle for the windscreen in the guard cavity making plumbing to the Airbox inlet difficult. Fatz has overcome this with our specifically designed Aluminium replacement unit which fits in the factory location. Resulting in the ability to plumb to the airbox inlet with 4" tubing for maximum airflow as required.
Our snorkels are provided with all components required for installation including all plumbing items needed, cad drawn and scale printed templates, colour photo instruction manual, Fabricated washer bottle, plumbing to airbox and the confidence only purchasing with Fatz can bring.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
