Improve airflow and fuel consumption of your Ford Ranger T6.2 or Volkswagen Amarok when you fit this Slimsport Rack Wind Fairing. It will push the air up and over your rack and roof cargo, reducing wind noise. There is a durable rubber blade on the bottom edge of the fairing, which seals and protects the roof when going over rough terrain. A wind fairing for the Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit and Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting instructions Materials used:Black powder coated steel Product Dimensions:1160mm (45.7") L x 182mm (7.2") W x 182mm (7.2") H Weight:3.88kg (8.6lbs)

This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation. All Front Runner Racks are backed by a limited lifetime warranty* Features KRFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit Consisting of: 1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.221kg (66.63lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 300mm (12") Shipping Weight: Weight: 7.22kg (16lbs)

This 2166mm/85.3 full-size Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and a set of Foot Rails to mount the Slimline II Tray to the 5th Gen Toyota 4Runner. Easily install using the eight existing factory mounting points. Drilling and no drilling mounting options are included to secure the front Foot Rails. All Front Runner Rack Kits contain installation instructions and all the necessary components to mount the Slimline II Tray to your vehicle. The vehicle-specific Foot Rails have openings for storing compatible gear under the rack, such as Front Runner tables. An opening on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRTF054T - Toyota 4Runner (5th Gen) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FATF006 - Toyota 4runner (2009-Current) Full Rack Foot Rails1x RRAC961 - Toyota 4Runner (5th Gen) No Drill Installation Kit1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 41.379kg (91.22lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 41.84kg (92lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Volkswagen Amarok when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT010 - Volkswagen Amarok (2010-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x LBSK017 - Roof Load Bar Pair 1475mm(W) Material used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 8.54kg (18.83lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6") Length: 1585mm (62") Height: 165mm (6") Shipping Weight: Weight: 8.6kg (19lbs)

This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen Amarok. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 1 x FAVA001 - Volkswagen Amarok Foot Rails - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner  Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 26kg (57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 30.3kg (66.7lbs)

The rack size is approximately 1255mm/49.4'' (W) x 1762mm/69.4'' (L). The Slimline II Tray mounts to supplied feet that slide into the canopy track. All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: RSI Canopies are color-coded to your vehicle and have a lead time of 10 working days to manufacture.

The rack size is approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track. All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Direction Plus™ Fuel Manager Post-Filter Kit PF603DPK is designed and engineered in Australia to suit Volkswagen Amarok models, protecting the engine against costly injector failure. This kit fits: Volkswagen Amarok CDBA (2.0L 4cyl) 2012-2019 Single Battery Only Only one Kit can be fitted, either Fuel Manager or ProVent Catch Can PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Pre-Filter Kit FM643DPK is designed and engineered in Australia to suit Volkswagen Amarok 6cyl models, protecting the engine against costly injector failure. VW Amarok DDXC/XE (3.0L 6cyl) 2016 – 2023 Single Battery Only Only one Kit can be fitted, either Fuel Manager or ProVent Catch Can Kit will not fit if the water pump is fitted on the drivers side. Please check before purchase. PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. HOW IT WORKS Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

SUITS: Volkswagon Amarok 2H Volkswagen Amarok FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm WEIGHT 112.4kg

Compatible with: Volkswagen Amarok (4 cylinder models) 05/11 - Current

Compatible with: Volkswagen Amarok (4 cylinder models) 05/11 - Current

Compatible with: Volkswagen Amarok (4 cylinder models) 05/11 - Current

Compatible with: Volkswagen Amarok (4 cylinder models)

Compatible with: Volkswagen Amarok (4 cylinder models) Front Twin Buckets Pair with Driver & Passenger Seat Lumbar Support Adjustment inc. Console Cover (AIRBAG SEATS). Year: 05/15-CURRENT Model: VOLKSWAGEN AMAROK / CORE 4 CYLINDER

VEHICLE DATE: V6 Core 10/18-03/2023 + Trendline/Highline 2011-03/2023 PRODUCT TYPE: Canvas Seat covers SUITS: Amarok Trendline/Highline (4 Cylinder Model) + Amarok MY18 V6 Core (6 Cylinder Model) Complete front and second row seat set - (VWA01 + VWA02) FEATURES: Fully Airbag Compliant ADR Certified Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean