POLYAIR 2" Lift Red Series Airbag Kit, Holden Colorado 7...
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Holden - Colorado 7 Trailblazer RG
Isuzu - Mu-X Gen 1 & Gen 2, 2013 -on
POLYAIR Red Series Kit () Toyota - Lexus, Landcruiser 1"...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Lexus LX, 1995-on, NON-AIR SUSPENSION
Toyota - Landcruiser 80 Series, Toyota - Landcruiser 100 series IFS, Toyota - Landcruiser 200 Series
POLYAIR Red Series Kit To Suit Nissan Pathfinder R51 2005...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
POLYAIR Red Series Kit Toyota Prado 0 - 2" Lift...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Prado 95 series 1996 - 2002
MSA Toyota Hilux Sr5 Single/Extra D/C Rear Extra Cab Small...
$319.50
$355.00
Rear Extra Cab Small 50/50 bench single back (No Headrest).
Year: 08/97-04/05
Model: SR5 Single, Extra & Dual Cab
Position: Rear
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
FRONT RUNNER Expedition Rail Kit - Sides - For 2772Mm...
$318.60
$354.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 14 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 14 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:10x Tubular rails2x Cast LH drop downs2x Cast RH drop downs8x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2652mm (104.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.6kg (10.1lbs)
FRONT RUNNER Potjie Pot/Dutch Oven And Carrier - RRAC081
$316.80
$352.00
Theres no better place to keep potentially hot, grimy, dirty, and cumbersome camp kitchen supplies than up and out of the way, outside the vehicle.
The Front Runner Potjie Pot Carrier offers a sensible way to travel with a potjie pot.
The potjie pot is secured in the bracket by the three legs. The supplied ratchet strap threads through the lid of the pot and fixes points on the bracket.
The #3 cast iron pot holds 7.8L / 2.1 Gallons. The round shape and cast iron allows the heat to flow evenly around the sides and maintain liquids at the lowest point to keep them from burning. The lid has a deep lip for holding hot coals.
The high strength steel carrier is finished with the same durable, weather resistant powder coating as the Front Runner Slimline II Rack.
Like all Front Runner rack accessories, the installation is simple. Just slide the bolts into the t-slots of any Front Runner Rack Tray, set down the carrier, then add nuts and tighten.
Features
Consists of:
Rack mounted bracket
Strap guide
Ratchet strap
mounting hardware
No 3 cast iron pot
Materials used:
Black powder-coated high strength steel
Nylon strap
Cast iron pot
Product Dimensions:
280mm (11") W x 280mm (11") D x 343mm (13.5") H
Pot Specifications:
No. 3 potjie Pot - 7.8l (2.1gal) capacity
Max outer diameter: 290mm (11.4")
Height: 300mm (11.8")
Lid max outer diameter: 260mm (10.2")
Total Weight:
11.25kg (24.9lbs)
ALPINE S2-Series 12" Dual Voice Coil Subwoofer - S2-W12D4
$314.96
$349.95
ALPINE S2-SERIES 12" DUAL VOICE COIL SUBWOOFER-S2-W12D4
Enhance your sound system’s performance with the remarkable S-Series S2-W12D4 12″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 12-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W12D4 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W12D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W12D4 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W12D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W12D4 12″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W12D4 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 600W RMS / 1800W Peak
Nominal Impedance: 4Ω
Frequency Response: 23Hz – 215Hz
Sensitivity (1W/1M): 86.2dB
Voice Coil: 66.04mm
X-Max (1-Way): 15mm
Magnet Weight: 1.81kg
ALPINE S2-Series 12" Dual Voice Coil Subwoofer - S2-W12D2
$314.96
$349.95
ALPINE S2-SERIES 12" DUAL VOICE COIL SUBWOOFER-S2-W12D2
Enhance your sound system’s performance with the remarkable S-Series S2-W12D2 12″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 12-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W12D2 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W12D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W12D2 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W12D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W12D2 12″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W12D2 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 600W RMS / 1800W Peak
Nominal Impedance: 2Ω
Frequency Response: 23Hz – 215Hz
Sensitivity (1W/1M): 85.7dB
Voice Coil: 66.04mm
X-Max (1-Way): 15mm
Magnet Weight: 1.81kg
ALPINE Mono Powerpack Amplifier ( 200 Rms ) ( 400...
$314.96
$349.95
ALPINE MONO POWERPACK AMPLIFIER ( 200 RMS ) ( 400 DPP )-KTA-200M
The ground-breaking KTA-200M Mono Power Pack Amplifier produces 400-watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space.
Whats more, the KTA-200M Power Pack Mono amplifier perfectly pairs with the iLX-W650E 7” audio visual receiver (sold separately). By utilising the ultra-shallow chassis design of the head unit the amplifier mounts seamlessly onto the back of the chassis. This innovative space saving design, delivers incredible power output and dynamic sound—making the PowerStack duo an industry first.
Big Sound Small Space
Utilising Alpine’s exclusive Dynamic Peak Power (DPP) technology, the 200-watt KTA-200M delivers bursts of power to meet the peak demands of your music effectively rising to 400-watts and then rolling back to maintain efficiency. The result is crisp, clean music at all volumes.
Simple way to add BASS
If you’re craving the impact of bass in your sound system but don’t have the room in your budget or vehicle for a traditional amplifier, start your journey to better sound with the compact KTA-200M. With the highest performance value on the market, this mono-power amp provides an easy upgrade path to add more bass to your sound system.
ALPINE R-Series 8" Dual Voice Coil Subwoofer - R2-W8D4
$314.96
$349.95
The R2-W8D4 handles up to 350 watts RMS, so it's ready for your high-powered amp. Its dual oversized 4-ohm voice coils offer wiring flexibility for multiple subwoofer setups. Since it works well in sealed or ported enclosures you'll enjoy your music the way you like to hear it.
8" subwoofer with dual 4-ohm voice coils
Kevlar reinforced pulp cone with HAMR Santoprene rubber surround
frequency response: 30-200 Hz
power handling: 150-350 watts RMS (175 watts per coil)
peak power: 1,000 watts
sensitivity: 83.7 dB
top-mount depth: 4.631"
mounting height: 0.875"
sealed box volume: 0.2-0.5 cu. ft.
ported box volume: 0.3-0.75 cu. ft.
FRONT RUNNER 4X4 DS50 Drop Slide™ Fridge Slide 50L–80L -...
$314.10
$349.00
MSA 4X4 DS50 Drop Slide™ Fridge Slide
Product Code: DS50
The MSA 4X4 DS50 Drop Slide™ is the ultimate fridge access solution for 4WD touring, camping, caravans, camper trailers, and canopy setups. Designed to provide safe and convenient access to portable fridges, toolboxes, and generators, the patented Drop Slide™ lowers your fridge by 300mm while extending it further beyond the vehicle for effortless access.
Using MSA's innovative lowering mechanism, the platform remains perfectly level throughout operation while avoiding contact with your vehicle. This makes accessing food, drinks, and camping supplies significantly easier, particularly in lifted vehicles and high canopy installations.
Built to withstand Australia's toughest touring conditions, the DS50 features a heavy-duty powder-coated steel frame, stainless steel hardware, and MSA's signature blue anodised aluminium faceplate. The compact design maximises available storage space while the lock-in and lock-out safety system secures the slide during operation and transport.
Features
Patented Drop Slide™ design
300mm controlled lowering action
Compact space-saving design
Easy installation with pre-drilled mounting holes
Lock-in and lock-out safety system
Heavy-duty powder-coated steel frame
Stainless steel and blue anodised aluminium fittings
Travel lock and key included
Suitable for fridges, generators, and storage systems
Compatible with MSA 4X4 Fridge Barriers
All fixing hardware and tie-down straps included
Backed by MSA 4X4's Lifetime Guarantee
Specifications
Product Code: DS50
Weight: 35kg
Fridge Tray Size: 810mm x 480mm
Slide Length (Closed): 880mm
Slide Length (Open): 1860mm
Overall Width: 590mm
Handle Width: 535mm
Drop Distance: 300mm
Gas Strut Rating: 800N
Freight Dimensions: 860mm x 690mm x 170mm
Freight Weight: 38kg
Frequently Asked Questions
What size fridge will fit the MSA DS50 Drop Slide™?
The DS50 is designed to suit many popular portable fridge models typically ranging from 50L to 80L. We recommend checking your fridge dimensions against the tray size before purchasing.
How far does the DS50 Drop Slide™ lower?
The DS50 lowers approximately 300mm while extending out from the vehicle, making it easier to access fridges installed in canopies, wagons, and touring setups.
Can the DS50 be installed in a canopy or caravan?
Yes. The DS50 is suitable for 4WD wagons, ute canopies, caravans, camper trailers, and touring vehicles where easier fridge access is required.
FRONT RUNNER Upright Water Tank / Flat - WTAN007
$311.40
$346.00
For showers, drinking, and cooking, this slim upright water tank fits inconspicuously behind the rear seat.
The fact that it is of such a slim design reduces the water sloshing noise and allows it to utilise space that would usually go to waste.
40l (10.6gal) capacity.
Made from food grade polyethylene and is BPA free
This water tank has plastic pipe fitting located at the bottom of the cut-out.
The Water Tank Hose Kit for this water tank is sold seperately.
Features
Material used:
Tank: BPA-free polyethylene
Fittings: Plastic
Capacity:
40l (10.6gal)
Product Dimensions:
W 1260mm (50") x H 550mm (21.7") x L 65mm (2.6")
Cut-out size:
W 60mm (2.4") x H 270mm (10.6") - at one end only
Weight:
8.46kg (18.65lbs)
Special Notes
SKU: CR0874-GY-COMP
STORE PICK-UP ONLY- FRONT RUNNER Alu-Cab Roof Top Tent Mount...
$307.80
$342.00
Now, you can easily mount an Alu-Cab tent to your reliable Front Runner Roof Rack, thanks to this black powder-coated steel Tent Mount Kit, which consists of four brackets and two support channel, plus all the necessary nuts and bolts.
Mount your Alu-Cab tent with this specifically made Tent Mount Kit to the Front Runner Roof Rack.
This kit consists of four (4) x Tent Mount Bracket/Standard which match the roof rack's low profile (30mm H) and two (2) 1255mm slats to support your tent.
They are made from black powder-coated steel, have pre-cut mounting holes and all mounting pieces (eg. bolts and nuts) are included.
Additional Alu-Cab tent mount kit, Alu-Cab Roof Top Tent Mount Kit / 1425mm is available.
Consists of:2 x Tent Mount Bracket/Standard1 x Roof Load Bar Pair 1255mm(W)Fitting instructionsInstallation hardware
Materials used:Black powder-coated steel
Product Dimensions:244mm (9.6") L x 60mm (2.4") W x 25mm (1") H (Single Bracket)
Weight:4.34kg (9.6lbs)
FRONT RUNNER Land Rover Defender (1983-2016) Side Mount Jerry Can...
$305.10
$339.00
The same trusted and off-rough tough Front Runner lockable Jerry Can Holder, only conveniently reconfigured to mount on the side of the vehicle via a gutter mount.
The adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse.
For use with 20l / 5.3 gallon NATO/Wedco style military cans.
This strap covers the Jerry can cap. Add your own padlock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.
Simple installation that uses an existing pop-rivet hole.
Made of durable black powder coated high strength steel and designed to mount to the rain gutter on vehicles like the classic Land Rovers.
Note: Will not work with Scepter style cans.Note: This Jerry Can Holder is not compatible with the Land Rover New Defender.
Consists of:1 x Side Mount Jerry Can HolderInstallation HardwareFitting Instruction
Materials used:Black powder coated high strength steel
Product Dimensions:230mm (9.1") L x 385mm (15.2") W x 711mm (28") H
Weight:5.5kg (12.1lbs)
FRONT RUNNER Toyota Land Cruiser 76 Under Console Safe -...
$301.50
$335.00
The safe is bolted to the body of the vehicle and the original centre console reinstalled to the top of the safe.
Installs easily using supplied installation kit and installation guide.
This robust safe is manufactured with 2mm thick mild steel and a tamper proof cam lock.
Powder coated black.
Carpet lined.
Note: Not suitable for Left-hand drive vehicles.
Features
Consists of:
1x Under Console Safe
2x Keys supplied
Installation kit
Materials used:
Black powder-coated mild steel with carpeted base
Product dimensions:
L 535mm (21.1") x W 205mm (8.1") x H 205mm (8.1")
Weight:
4.3kg (9.5lbs)
MSA Toyota Hilux Sr5 Single/Extra Dual Cab Rear Dc Full...
$297.90
$331.00
Rear Dual Cab Full Width Bench (3 Head Rests) (MTO)
Year: 08/09-10/13
Model: SR5 Single, Extra & Dual Cab
Position: Rear
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Basket Pack (Medium) - BP1.5
$296.10
$329.00
Dimensions (cm) 150L x 90W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie-downs
Integrated anti-flap design on all harness straps.
Heavy duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
MSA Tourer Pack (Small) - TP1.2
$296.10
$329.00
MSA 4X4’s Tourer Packs are the perfect way to increase storage possibilities during travel while freeing up space inside your vehicle.
TP1.2 Small Dimensions (cm) 120L x 120W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie downs
Integrated anti-flap design on all harness straps.
Heavy-duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
LIGHTFORCE Remote Mount Striker Hid 50W 4200K - CBRMS5042
$296.10
$329.00
• Bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow "V" line common in aftermarket kits • XENON HID bulbs used in these kits have been specially manufactured to match the relevant ballast outputs • Colour rendering available 4200K, 5000K • Ballast is pre-mounted to a stainless steel bracket located directly to the back of the light • Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference • Fully sealed and water-resistant compact slim-line ballast • Waterproof connectors provided • Available in 50w and 70w
70w ballast is now upgraded to a Fast start (12v only) reaching 100% intensity in 3 seconds (previous model 100% intensity was reached at 8 seconds).
Specifications
Recommended operating temperatures (ambient)
-40°C > +40°C Maximum
-40°F > +104°F Maximum
Lumen output:
50 watt 5000 lumen
70 watt 6400 lumen
For 50w and 70w models
Input voltage range 12 - 16 volts
Operating voltage 13.2 volts DC (typical)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
