FRONT RUNNER Toyota Land Cruiser 76 Load Bar Kit /...
$495.00
$550.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 155mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 155mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTL035 - Toyota Land Cruiser 76 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 120mm (5")Length 1555mm (61")Height 175mm (7")
Shipping Weight:
Weight 8.7kg (19.2lbs)
FRONT RUNNER Canopy Load Bar Kit / 1165Mm (W) -...
$495.00
$550.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 40mm Feet, 2 1165mm Load Bars, 2 1150mm Canopy Tracks, and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA007 - Canopy Load Bar Kit / 1165mm (W) - by Front Runner
Consisting of:
2 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner1 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 7kg (14lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 245mm (10")Length 1290mm (51")Height 115mm (5")
Shipping Weight:
MSA 4X4 Straight Fridge Slide 200kg Load Rating - SL50
$495.00
$550.00
MSA 4X4 SL50 Straight Fridge Slide
Part Number: SL50
The MSA 4X4 SL50 Straight Fridge Slide is designed to provide safe, convenient, and reliable access to your portable fridge while maximising storage efficiency in your 4WD, ute, canopy, caravan, or camper trailer. Ideal for vehicles with lower rear storage systems, the SL50 allows your fridge to slide smoothly beyond the tailgate while remaining level for easy access.
Engineered for Australian touring conditions, the SL50 features heavy-duty over-extension roller bearings that deliver maximum slide travel while maintaining an impressive 200kg slide runner rating. This makes it easier to access food, drinks, recovery gear, and camping equipment without climbing into your vehicle or lifting a fully loaded fridge.
For added safety and peace of mind, the SL50 incorporates MSA's proven lock-in and lock-out safety mechanism, along with a key lock and tie-down system to keep your fridge secure during operation and transport.
Features
Heavy-duty 200kg slide runner rating
Over-extension roller bearing system for maximum slide travel
Unique lock-in and lock-out safety feature
Pre-assembled for quick and easy installation
Blue anodised aluminium fittings
Includes all fixings and fridge tie-down straps
Sealed dust-resistant construction
Compatible with MSA Fridge Barriers
Suitable for 4WDs, caravans, camper trailers, canopies, and touring vehicles
Frequently Asked Questions
What is the load rating of the MSA SL50 Fridge Slide?
The SL50 features a heavy-duty 200kg slide runner rating, providing reliable support for loaded portable fridges and touring equipment.
Can the MSA SL50 be installed in a caravan or camper trailer?
Yes. The SL50 is suitable for caravans, camper trailers, canopies, 4WDs, and other touring vehicle storage systems.
Does the SL50 include installation hardware?
Yes. The SL50 comes pre-assembled and includes all required fixings and fridge tie-down straps for straightforward installation.
MSA SL60 Straight Fridge Slide 200kg Load Rating - SL60
$495.00
$550.00
MSA 4X4 SL60 Straight Fridge Slide
Part Number: SL60
The MSA 4X4 SL60 Straight Fridge Slide is designed to provide fast, safe, and convenient access to your portable fridge while maximising storage efficiency in your 4WD, ute, canopy, caravan, or camper trailer. Ideal for touring vehicles with lower rear storage setups, the SL60 allows your fridge to slide smoothly out beyond the tailgate or rear bar while remaining level for easy access.
Engineered for Australian touring conditions, the SL60 features heavy-duty over-extension roller bearings that deliver exceptional slide travel while maintaining an impressive 200kg load rating. Whether you're accessing food, drinks, or camping supplies, the slide eliminates the need to climb into your vehicle or struggle with lifting a fully loaded fridge.
For added safety and security, the SL60 incorporates MSA's unique lock-in and lock-out mechanism, preventing unwanted movement during operation and transit. A built-in key lock, sealed dust-resistant design, and included tie-down straps ensure your fridge remains secure on every adventure.
Features
Heavy-duty 200kg slide runner rating
Over-extension roller bearing system for maximum slide travel
Unique lock-in and lock-out safety mechanism
Pre-assembled for quick and easy installation
Blue anodised aluminium fittings for a premium finish
Includes all fixings and fridge tie-down straps
Sealed dust-resistant design
Available in multiple sizes to suit different fridge setups
Compatible fridge barriers available
Ideal for 4WDs, caravans, camper trailers, canopies, and touring vehicles
Frequently Asked Questions
What size fridge is the MSA SL60 suitable for?
The SL60 is designed to suit a wide range of portable fridges. We recommend checking your fridge dimensions and weight to ensure compatibility with the slide and your vehicle setup.
Can the MSA SL60 be installed in a canopy or caravan?
Yes. The SL60 is suitable for installation in 4WD wagons, ute canopies, caravans, camper trailers, and other touring setups where a straight slide configuration is preferred.
What is the weight capacity of the SL60 Fridge Slide?
The MSA SL60 features a heavy-duty 200kg slide runner rating, providing reliable performance for loaded fridges and touring equipment.
DIRECTION-PLUS Pv200 Kit To Suit Isuzu D-Max & Mu-X -...
$495.00
$550.00
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
ALPINE Next-Generation 6X9(16 X 24Cm) Component 2-Way R-Series Speakers -...
$494.96
$549.95
The All-new R-Series Speakers
Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget.
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.
6×9” 2-Way Component Speaker
The R2-S69C is the 6×9” 2-Way model of the new 2022 R-Series speaker line-up. It features a 16 x 24cm door woofer and a 4.3cm tweeter with up to 40kHz frequency response.
Glass-Fiber Reinforced Cone
The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.
Composite Basket and Large Magnets
The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth).
Hi-Res Audio Certified Hard Dome Tweeter
The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot.
Easy-Fit Tweeter in OEM Locations
You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation.
High-Pass X-Over Network
This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB.
HAMR Surround
Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion.
New Speaker Grills
The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.
ALPINE R-Series 12 Dual 2 Ohm Dvc Subwoofer - R2-W12D2
$494.96
$549.95
Alpine R2-W12D2 2nd Gen
Product Details:
12" Dual 2 ohms Alpine Type-R Series Series Subwoofer
Power Handling:
Peak: 2250 watts
RMS: 750 watts
Kevlar Reinforced Pulp Paper Cone
High-Amplitude Multi-Roll (H.A.M.R) Surround
Push-Type Speaker Terminals (Up To 8AWG Wire Size)
Oversized Dust Cap
65.5 mm (2.6")" High Temperature Voice coil
20 mm Xmax
127 oz. Double Stacked Ferrite magnet motor structure
Frequency Response: 24 - 200 Hz
Resonance Frequency (Fs): 29 Hz
Sensitivity: 85 dB
Sealed box volume: .55 cubic feet
Ported box volume: 1.0 cubic feet
Top-mount depth: 6-3/8"
Cutout diameter: 10.88"
CTA-2031 Compliant: Yes
ALPINE R-Series 12 Dual 4 Ohm Dvc Subwoofer - R2-W12D4
$494.96
$549.95
Next-Generation 12-inch (30cm) R-Series Subwoofer with Dual 4-Ohm Voice Coils
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. the new ceramic dust cap is very light weight and rigid, keeping distortion an absolute minimum. The new, enlarged motor structure ensures better overall woofer control for a clean, strong bass response.
General
Sealed: 12″
Frequency Response: 24Hz-200kHz
RMS Power Handling: 750W
Peak Power Handling: 2250W
DIRECTION-PLUS Pl Kit For Toyota Hilux N80 - PL628DPK
$494.10
$549.00
Direction-Plus™ PreLine-Plus Pre-filter kit PL628DPK fits in Toyota Hilux and Fortuner.
PROTECTION FROM CORROSION AND ABRASION
Direction-Plus™ PreLine-Plus Pre-filter kit is an innovative pre-filter system designer for diesel fuel systems which will ensure a high degree of water and particle pre-separation protecting your fuel system from corrosion and abrasion. The kit also includes an intuitive multi-stage water alert that will notify when it is necessary to drain the filter.
FRONT RUNNER Toyota Condor Load Bar Kit / Gutter Mount...
$493.20
$548.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTC003 - Toyota Condor Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 120mm (5")Length 1420mm (56")Height 220mm (9")
Shipping Weight:
Weight 8.8kg (19.3lbs)
DIRECTION-PLUS Pl Kit For Nissan Navara D23 - PL630DPK
$493.20
$548.00
Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
FRONT RUNNER Load Bar Kit Gutter Mount Fits Vw T3...
$492.30
$547.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1475mm Load Bars and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRVK003L - Volkswagen T3 Transporter/Kombi Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 180mm (7")
Length 1590mm (63")
Height 120mm (5")
Shipping Weight:
Weight 8.6kg (19.0lbs)
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Toyota Prado 150...
$492.30
$547.00
The TransChill Arctic Black Transmission cooler kit TCB620DPK fits:
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
Toyota Prado 155 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
This product is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
MSA Toyota Landcruiser 200 Series Lc200 Gx (5 Seater) Front...
$492.30
$547.00
Front Twin Buckets (AIRBAG SEATS) + Console Cover
+ Integrated Lumbar Support Adjustor Knob on Base. Driver Electrics
FRONT RUNNER Toyota Prado 95 Load Bar Kit / Gutter...
$486.00
$540.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 170mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 170mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTP016 - Toyota Prado 95 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 120mm (5")Length 1448mm (57")Height 175mm (7")
Shipping Weight:
Weight 8.6kg (18.9lbs)
FRONT RUNNER Land Rover Range Rover (1970-1996) Load Bar Kit...
$486.00
$540.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1475mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRRR005 - Land Rover Range Rover (1970-1996) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 175mm (7")
Length 1565mm (62")
Height 120mm (5")
Shipping Weight:
Weight 8.6kg (18.9lbs)
FRONT RUNNER Mitsubishi Pajero Lwb Load Bar Kit / Gutter...
$486.00
$540.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 155mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMP014 - Mitsubishi Pajero LWB Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1445mm (57")
Height 175mm (7")
Shipping Weight:
Weight 8.5kg (18.8lbs)
FRONT RUNNER 40In Led Slim Light Bar Vx1000-Cb Sm /...
$486.00
$540.00
Keep the adventure going long after the sun sets with this 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount. The near and far-field illumination with 36 high-performance LED’s will light your way up to 525m so you can always know what your adventure holds.
The 36 intense, high-performance LEDs, with OSRAM technology, reach a distance of 525m and deliver 6000 lumens.
The 5700 Kelvin, light intensity is distributed as a combo beam pattern- near and far-field illumination.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
To accommodate its wide range of uses, the searchlight is equipped with a durable polycarbonate lens.
The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aids in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
Individual installation is possible due to the VX1000-CB SM's double ECE certification.
The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Special regulations and legislation within each country should be taken into consideration before use.
Secures to your Front Runner Roof Rack with supplied mounting kit LED Light Bar VX1000-CB SM Mounting Bracket sold separately.
Consists of:1 x Lightbar1 x Bracket set1 x Bolt Kit
Product Dimensions:Light Bar:1031mm (40.6") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with supplied bracket:1084mm (42.7") L x 67mm (2.6") D x 63mm (2.5") H
Weight:2.76Kg (6.1lbs)
Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24V108W9 AmpsColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)
FRONT RUNNER Universal Vehicle Ladder / Short - LADD018
$483.30
$537.00
This ladder bolts to the body or to the rear barn doors of vans or utility vehicles.
Surface required to secure the ladder to the vehicle is 770mm 1480mm / 30.3" - 58".
The ladder has 5 steps.
Length from the bottom step to the top step is 1160mm / 45.7"
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Universal Vehicle Ladder / Short
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
Overall Ladder Length:
Min 1180mm / 46.4"
Max 1486mm / 58.5"
Mounting hole centers:
Min 722mm / 28.4"
Max 1438mm / 56.6"
Mounting surface required:
Min 770mm / 30.3"
Max 1480mm / 58"
Weight:
7.25kg (16lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 4533Mm (L)...
$480.60
$534.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 4533mm / 178.5".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
16x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
12x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
4131mm (162.6") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
8.26kg (18.2lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
