Torqit
TORQIT Modulemap: Remote Remap For 3.2L Nw Mitsubishi Pajero - MMP21-99
$1,791.00
$1,990.00
MODULEMAP FOR MITSUBISHI PAJERO NW 3.2L: 2012 – 2017
Access the full potential of your NW Pajero with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your Pajero safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your Pajero to stock performance
Torqit
TORQIT Modulemap: Remote Remap For 3.2L Nx Mitsubishi Pajero (11/2013) - MMP21-100
$1,791.00
$1,990.00
MODULEMAP FOR MITSUBISHI PAJERO NX 3.2L: 11/2013…
Access the full potential of your NX Pajero with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your Pajero safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your Pajero to stock performance
Torqit
TORQIT Modulemap: Remote Remap For Mitsubishi Np Pajero 3.2L 11/2002 - MMP21-84
$1,791.00
$1,990.00
MODULEMAP FOR MITSUBISHI NP PAJERO 3.2L: 11/2002…
Access the full potential of your Mitsubishi NP Pajero with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your NP Pajero safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your Pajero’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your NP Pajero to stock performance
MSA
MSA Mitsubishi Pajero Sport Towing Mirrors (Black, Electric, Indicators, Blind Spot Monitoring) 2015-Current - TM1202
$888.30
$987.00
Description
MITSUBISHI PAJERO SPORT TOWING MIRRORS (BLACK, ELECTRIC, INDICATORS, BLIND SPOT MONITORING)
Year: 2015-CurrentModel: Mitsubishi Pajero Sport (Black, Electric, Indicators, Blind Spot Monitoring)Part Number: TM1202
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
Torqit
TORQIT Power Module & Pedal Torq Package For Mitsubishi Triton Mq - KIT1058PT
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.
Torqit
TORQIT Power Module & Pedal Torq Package For Mitsubishi Pajero, Triton - KIT1032PT
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.
Torqit
TORQIT Power Module & Pedal Torq Package For Mitsubishi Challenger, Triton - KIT1003PT
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.
Torqit
TORQIT Pedal Torq Plus To Suit Mitsubishi Triton - PTP1062
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT Pedal Torq Plus To Suit Mitsubishi Challenger, Pajero & Triton - PTP1036
$593.01
$658.90
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT Mitsubishi Ml Triton 3" Turbo Strainless Steel Back Exhaust - HS8021SS
$1,970.10
$2,189.00
Upgrade your ride with the sturdy stainless steel Torqit Turbo Back Exhaust System. Suits suit Mitsubishi ML Triton. Unbridled power. Order Now
Torqit
TORQIT Premium Mitsubishi Mk Triton 3" Turbo Back Car Exhaust - HS8022SS
$1,611.00
$1,790.00
Experience power and style with the tough stainless steel Torqit Turbo Back Exhaust System. Suits Mitsubishi MK Triton. Elevate your ride. Order now.
Torqit
TORQIT High-Grade Mitsubishi Nw Pajero 3" Turbo Back Car Exhaust - HS8110SS
$1,970.10
$2,189.00
Improve your vehicle's exhaust system with the long-lasting stainless steel Torqit Turbo Back Exhaust. Suits Mitsubishi NW Pajero. Performance unleashed. Order today.
Torqit
TORQIT Ultimate 3" Turbo Back Exhaust Mitsubishi Ns Pajero - HS8109SS
$1,970.10
$2,189.00
Unshackle the power of your ride with the robust Stainless Steel Torqit Turbo Back Exhaust System. Suits Mitsubishi NS Pajero. Turn heads wherever you go.
Torqit
TORQIT 3" Turbo Back Exhaust Mitsubishi Np Pajero & Nissan R51 Pathfinder - HS8126SS
$1,970.10
$2,189.00
Achieve optimal performance with the solid stainless steel Turbo Torqit Back Exhaust. To suit Mitsubishi NP Pajero and Nissan R51 Pathfinder. Power and style combined.
Torqit
TORQIT High Quality 3" Turbo Back Exhaust Mitsubishi Challenger - HS8119SS
$1,970.10
$2,189.00
Upgrade your vehicle's exhaust system to the everlasting stainless steel Torqit Turbo Back Exhaust. Unleash your ride's true potential. Suits Mitsubishi Challenger
Torqit
TORQIT Power Module To Suit Mitsubishi Mq Triton - CRM1058
$1,633.50
$1,815.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT Power Module To Suit Mitsubishi Ns Pajero, Nw Pajero, Ml Triton - CRM1032
$1,633.50
$1,815.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT Power Module To Suit Mitsubishi Challenger Kh, Triton Ml/Mn - CRM1003
$1,633.50
$1,815.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Front Runner
FRONT RUNNER Mitsubishi Pajero Ck/Bk Lwb Slimline Ii Roof Rack Kit - KRMP018T
$2,186.10
$2,429.00
This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mitsubishi Pajero CK/BK LWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
NOTE: Factory holes are used for installation, requires factory rails to be removed.
Features
KRMP018T - Mitsubish Pajero2006-Curr SlimlineII Roof Rack Kit
Consisting of:
1 x FAMP001 - Mitsubishi Pajero CK (3 Gen) LWB Foot Rails - by Front Runner
1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 630mm (25")
Length 1640mm (65")
Height 160mm (6")
Shipping Weight:
Weight 39.4kg (86.6lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero L040 (1982-1990) Slimline Ii Roof Rack Kit - KRMP023T
$2,316.60
$2,574.00
This 2368mm/93.2"long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and eight (8) Gutter Mount Legs to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty*
Features
KRMP023T - Mitsubishi Pajero L040 (1982-1990) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4x LASS104 - No 4 Leg 170mm (Pair)
1x RRSTG12 - SLII Tray - 1345mm(W)X2368mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.09kg (90.59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 44kg (97lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Lwb (1991-1999) Slimline Ii Roof Rack Kit - KRMP007L
$2,205.00
$2,450.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero LWB (1991-1999) contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMP007L - Mitsubishi Pajero LWB (1991-1999) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3x LASP104 - No 4 Plus Leg 180mm (Pair)
1x LASS105 - No 5 Leg 190mm (Pair)
1x RRSTG11 - SLII Tray - 1345mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.3kg (86.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 37.95kg (83lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Lwb (1991-1999) Slimline Ii Roof Rack Kit / Tall - KRMPT07L
$2,094.30
$2,327.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero LWB (1991-1999) contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMPT07L - Mitsubishi Pajero LWB (1991-1999) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.1kg (83.9lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Lwb Load Bar Kit / Gutter Mount - KRMP014
$486.00
$540.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 155mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMP014 - Mitsubishi Pajero LWB Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1445mm (57")
Height 175mm (7")
Shipping Weight:
Weight 8.5kg (18.8lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Sport (2008-2015) Load Bar Kit / Track And Feet - KRMP016
$618.30
$687.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 50mm Feet, 2 1165mm Load Bars, 2 Mitsubishi Pajero Sport 1900mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.
These Load Bars are mounted to the vehicles roof via a set of supplied Tracks and Track Mounted Feet.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMP016 - Mitsubishi Pajero Sport (2008-2015) Load Bar Kit / Track & Feet - by Front Runner
Consisting of:
2 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x TRMP004 - Mitsubishi Pajero Sport Tracks / 1900mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 9kg (19lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1910mm (75")
Height 180mm (7")
Shipping Weight:
Weight 9.9kg (21.8lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Sport (2008-2015) Slimline Ii Roof Rack Kit - KRMP009T
$1,784.70
$1,983.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero Sport (2008-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMP009T - Mitsubishi Pajero Sport (2008-2015) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x RRSTA09 - Slimline II Tray - 1165mm(W) X 1762mm(L) - by Front Runner
1 x TRMP004 - Mitsubishi Pajero Sport Tracks / 1900mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.4kg (67.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
34.0kg (75.0lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Sport (2008-2015) Slimline Ii Roof Rack Kit / Tall - KRMPT09T
$1,765.80
$1,962.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero Sport contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMPT09T - Mitsubishi Pajero Sport (2008-2015) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTA09 - Slimline II Tray - 1165mm(W) X 1762mm(L) - by Front Runner
1 x TRMP004 - Mitsubishi Pajero Sport Tracks / 1900mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.8kg (68.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
34.4kg (76.0lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Sport (Qe Series) Slimline Ii Roof Rack Kit - KRMP024T
$1,926.90
$2,141.00
This 1964mm/77.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your Mitsubishi Pajero Sport (QE Series). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
NOTE: Factory holes are used for installation, requires factory rails to be removed.
Features
KRMP024T - Mitsubishi Pajero Sport (QE Series) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAMP003 - Mitsubishi Pajero Sport (QE Series) Foot Rails
1x RRSTA10 - SLII Tray - 1165mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.15kg (84.11lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 39kg (86lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Swb (1991-1999) Slimline Ii Roof Rack Kit / Tall - KRMPT12T
$1,643.40
$1,826.00
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero SWB (1991-1999) contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMPT12T - Mitsubishi Pajero SWB (1991-1999) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
2 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner
1 x TRMP005 - Mitsubishi Pajero SWB Tracks / 1620mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.7kg (63.2lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
34.2kg (75.0lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero Swb (1992-1999) Load Bar Kit / Track And Feet - KRMP017
$576.00
$640.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 60mm Feet, 2 1165mm Load Bars, 2 Mitsubishi Pajero SWB 1620mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.
These Load Bars are mounted to the vehicles roof via a set of supplied Tracks and Track Mounted Feet.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMP017 - Mitsubishi Pajero SWB Load Bar Kit? / Track & Feet - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x TRMP005 - Mitsubishi Pajero SWB Tracks / 1620mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 110mm (4")
Length 1625mm (64")
Height 180mm (7")
Shipping Weight:
Weight 9.4kg (20.7lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero/Montero Ck (3Rd Gen) Swb Load Bar Kit - KRMP003
$618.30
$687.00
A set of Load Bars used to transport gear on the roof of your Mitsubishi Pajero/Montero CK SWB. This low profile solution includes 4 mounting Feet, 2 1255mm Load Bars, tracks, installation kit and fitting instructions.
These Load Bars are mounted to the Mitsubishi Pajero/Montero CK SWB via a set of supplied Mounted Feet and Tracks.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMP003 - Mitsubishi Pajero/Montero CK (3rd GEN) SWB Load Bar Kit - by Front Runner
Consisting of:
2x FASS024 - Foot Set / 40mm - 50mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)1x TRMP002 - Mitsubishi Pajero CK (3rd Gen)SWB Tracks/1600mm(L)1x WDLB001 - Load Bar Wind Deflector / 10mm
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.77kg (19.33lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 115mm (5"); Length: 1610mm (63"); Height: 250mm (10")
Shipping Weight:
Weight: 9.4kg (21lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero/Montero Ck (3Rd Gen) Swb Slimline Ii Roof Rack Kit - KRMP004T
$1,665.00
$1,850.00
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero/Montero CK (3rd Gen) SWB contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMP004T - Mitsubishi Pajero/Montero CK (3rd Gen) SWB Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner
1 x TRMP002 - Mitsubishi Pajero CK (3rd Gen) SWB Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.7kg (63.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
34.2kg (75.0lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero/Montero Ck (3Rd Gen) Swb Slimline Ii Roof Rack Kit - KRMPT04T
$1,668.60
$1,854.00
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero/Montero CK (3rd Gen) SWB contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMPT04T - Mitsubishi Pajero/Montero CK (3rd Gen) SWB Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner
1 x TRMP002 - Mitsubishi Pajero CK (3rd Gen) SWB Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.0kg (64.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
34.5kg (76.0lbs)
Front Runner
FRONT RUNNER Mitsubishi Pajero/Montero Swb (2Nd Gen) Slimline Ii Roof Rack Kit - KRMP012T
$1,643.40
$1,826.00
This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero/Montero SWB 2nd Gen contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMP012T - Mitsubishi Pajero/Montero SWB (2nd Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner
1 x TRMP005 - Mitsubishi Pajero SWB Tracks / 1620mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.7kg (63.2lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
34.2kg (75.0lbs)
Front Runner
FRONT RUNNER Mitsubishi Triton (2015-Current) Egr Rolltrac Load Bed Load Bar Kit - KRRT008
$537.30
$597.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Mitsubishi Triton when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1425mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT008 - Mitsubishi Triton (2015-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK016 - Roof Load Bar Pair 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.32kg (18.34lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1540mm (61")
Height: 160mm (6")
Shipping Weight:
Weight: 8.4kg (18lbs)
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
