Direction Plus™ Ryco Pre-Filter Kit RC642DPK is designed, engineered & assembled in Australia to suit Toyota Landcruiser 70 series 1VD-FTV (2018-2022) models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Land Cruiser 70 Series 1VD-FTV (4.5L 8cyl) 2018 – On Driver side mounting location. PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

  Direction Plus™ Ryco Pre-Filter Kit RC648DPK is designed, engineered & assembled in Australia to suit Toyota Landcruiser 70 series 1GD-FTV 2.8L 4cyl (2023 – On) models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Land Cruiser 70 Series 1GD-FTV (2.8L 4cyl) 2023 – On Driver side mounting location. PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC629DPK is designed, engineered & assembled in Australia to suit Mitsubishi Triton MQ, MR & Pajero Sport models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Mitsubishi Triton MQ 4N15 (2.4L 4cyl) 2015 – 2018 NOT dual battery compatible Mitsubishi Triton MR 4N15 (2.4L 4cyl) 2018 – 2024 NOT dual battery compatible Mitsubishi Pajero Sport 4N15 (2.4L 4cyl) 2015 – 2023 NOT dual battery compatible PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC652DPK is designed, engineered & assembled in Australia to suit Mitsubishi Triton MV models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Mitsubishi Triton MV 4N16 (2.4L 4cyl) 2024 – on PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC630DPK is designed, engineered & assembled in Australia to suit Nissan Navara NP300 models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015 – On PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC671DPK is designed, engineered & assembled in Australia to suit Ford Next Gen Everest & Ranger models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. UPDATE: Version 2 bracket released November 2023 now compatible for Touring & Premium Pack options with Auxilliary 6 switch pack (overhead switches) This kit fits: Ford Next-Gen Ranger & Everest (BF2S 3.0L 6cyl) 2022- On Compatible with Dual Battery Systems Ford Next-Gen Ranger & Everest (YN2S 2.0L 4cyl) 2022- On Compatible with Dual Battery Systems VW Amarok Core & Life NF – (DXWA 3.0L 6cyl) 2023- On  Excludes Aventura, Panamericana & Style due to different battery tray VW Amarok Core & Life NF – (DXK 2.0L 4cyl) 2023-On Excludes Aventura, Panamericana & Style due to different battery tray PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC620DPK is designed, engineered & assembled in Australia to suit Toyota Prado 150 and 155 Series (2009-2021) models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl) 2009 – 2015 Toyota Prado 150/155 Series 1GD-FTV (2.8L 4cyl) 2015 – On PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC612DPK is designed and engineered in Australia to suit Toyota Hilux (1KD-FTV) models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Hilux 1KD-FTV (3.0L 4cyl) 2004 – 2006 Toyota Hilux 1KD-FTV (3.0L 4cyl) 2008 – 2009 Toyota Hilux 1KD-FTV (3.0L 4cyl) 2009 – 2015 PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC628DPK is designed, engineered & assembled in Australia to suit Toyota Hilux N80 and Fortuner models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Hilux N80 1GD-FTV (2.8L 4cyl) 2016 – On Toyota Hilux N80 2GD-FTV (2.4L 4cyl) 2018 – On Toyota Fortuner 1GD-FTV (2.8L 4cyl) 2016 – On PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC625DPK is designed, engineered & assembled in Australia to suit Toyota Land Cruiser 70 Series models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Land Cruiser 70 Series 1VD-FTV (4.5L 8cyl) 2012 – On *Radiator mounting location PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Long gone are the days of scheduling unnecessary fuel water separator inspections. Traditionally pre-filters rely on a visual inspection of the bowl and draining when full. With the NEW Ryco S102XK Fuel Pre-Filter Sensor Kit, simply log into the Ryco Connect App or let the Ryco Bluetooth Sensor Indicator let you know when it’s time to drain the unit. All of this adds an extra layer of protection for your diesel engine’s sensitive fuel system. The Ryco S102XK Pre-Filter Sensor Kit comes with all the parts necessary for users to be notified instantly by the Ryco Connect App when it is time to inspect and drain the unit, eliminating unnecessary visual assessments. Having a fuel water separator can assist your vehicle’s fuel system by filtering water and particulates before they ever reach the fuel filter, however, this is only working if the fuel water separator itself is clean and serviced regularly. What the Ryco Fuel Water Separator Sensor Kit does is support this line of defence, providing additional assurance to 4×4 owners that their engine health is protected by being better aware of what the fuel water separator’s servicing needs are. Ryco has also introduced the S101X Bluetooth Sensor Indicator, a hands-free optional accessory to accompany the Fuel Water Separator Sensor Kit, providing an in-cabin audio-visual alert notifying drivers when it is time to service their fuel water separator. The Bluetooth Sensor Indicator is powered by the traditional auxiliary 12/24V power adaptor or modern USB-A port and will operate even when the Fuel Water Separator Sensor Kit is connected to the Ryco Connect app, never interfering with app notifications if you are wanting to use both. BENEFITS OF A RYCO PRE-FILTER KIT: Be notified instantly through the Ryco Connect App when it’s time to drain the unit Remote filter monitoring via Bluetooth Connect remotely to your smartphone with the Ryco Connect app or in the cabin with the Ryco Bluetooth Sensor Indicator Easy Installation. No drilling through the firewall to run wires Fits all common fuel water separator brand filters (Adapters included) Kit comes with fuse taps to provide ignition-on power rather than wiring a separate circuit Expandable, system allows for the connection of 2 sensors IP67 rated to resist dust and water protection against harsh driving conditions Suitable for 12/24 volt systems with automatic voltage detection S102XK PRE-FILTER ADAPTORS: The S102XK Kit comes with various adaptors to suit upgrades to all RYCO Pre-Filters and other popular fuel pre-filters. All adaptors also come with a built-in drain, allowing you to simply drain water from the fuel system. ADAPTORS COMPATIBLE WITH: Ryco Z980, Z980S, Z981, Z982 Series Fuel Manager 31863, 31871 & 36693 Mann+Hummel Preline PL150 Dolandson P551615, P550588 & P551426 Stanadyne 37281 Fleetguard FS1069 Baldwin BF7956D NAPA 3694 WIX 33694

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

The Direction-Plus™ TR+ Throttle Controller TR0151DP fits Great Wall Cannon, Haval H1, H2, H2S, H4, H6, H7, H8, H9 and F7X; and Volkwagen Amarok models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures) INSTALLATION With an easy installation, the TR+ can be fitted to both diesel and petrol vehicles in less than 5 minutes! The Direction-Plus™ TR+ Throttle Controller utilises all factory plugs so there is no cutting or rewiring necessary.

The Direction-Plus™ TR+ Throttle Controller TR0609DP fits Pajero, Triton and Challenger models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0801DP fits Nissan Patrol GU ZD30 (3.0L 4cyl) 2006-2018 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! NOTE: This TR+ throttle controller model is only suited to common rail vehicles (CRD) due a changeover in 2006/07 where the throttles are completely different. CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0601DP fits Mitsubishi Pajero Sport and Triton models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0715DP fits Everest / Ranger / Raptor and BT-50 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0567DP fits: Toyota FJ 1GR (2007-2017) Hilux 1KD-FTV (2004-2015) Hilux 1GR (2009-2015) Land Cruiser 70 series 1VD-FTV (2007-2012) Prado 120 1KD-FTV (2003-2009) Prado 150 1GR (2010-2017) The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. 

The Direction-Plus™ TR+ Throttle Controller TR0830DP fits Holden Colorado (2008-2012), Rodeo (2007-2008); Isuzu D-Max (2012-2022) and MU-X (2013-2022) ; Mazda BT-50 (2020-2022) Toyota Hilux 1GD-FTV (2016-2022) 2GD-FTV (2018-2022), Fortuner 1GD-FTV (2016-2022), Landcruiser 70 (2007-2022), 200 series (2007-2022) and 300 series (2022), Prado 150 1GD-FTV (2015-2021) and 155 series 1GD-FTV (2015-2022) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0719DP fits: Nissan Navara D22 YD25 (2.5L 4cyl) 2008-2015 The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0221DP fits: LDV T60 I4 (2.0L 4cyl) 2017-2022 LDV D90 Turbo MPFI  (2.0L 4cyl) 2017-2022 The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0833DP fits Ford Ranger WEAT / WLAT (2007-2011) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0985DP fits Jeep Wrangler & Grand Cherokee WK2 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures) INSTALLATION With an easy installation, the TR+ can be fitted to both diesel and petrol vehicles in less than 5 minutes! The Direction-Plus™ TR+ Throttle Controller utilises all factory plugs so there is no cutting or rewiring necessary.

The TransChill Transmission oil cooler kit is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic transmission fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.

The TransChill Transmission oil cooler kit is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic transmission fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.

The NEW 32mm 14 row TransChill Transmission cooler kit TCB645DPK fits Isuzu D-Max and Mazda BT-50 4JJ3-TCX (3.0L 4cyl) 2020 – On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The TransChill Arctic Black Transmission cooler kit TCB612DPK fits Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2004-2015 & 1GR (4.0L 6cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The TransChill Arctic Black Transmission cooler kit TCB671DPK fits: Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB621DPK fits Ford Ranger, Everest and Mazda BT-50 P5AT (3.2L 5cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The NEW 32mm 14 row TransChill Transmission cooler kit TCB601DPK fits Isuzu D-Max and MU-X 4JJ1TCX (3.0L 4cyl) 2012 – 2020 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB615DPK fits Toyota Landcruiser 200 Series models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB652DPK fits Mitsubishi Triton MV 4N16 (2024 – On) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The NEW & IMPROVED 32mm 14 row Arctic Black TransChill Transmission Oil Cooler Kit (TCB630DPK) suits the Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015- On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation Pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer 75% more performance than a comparable tube and fin design (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Australian Made vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets Locally designed and packed with all the mounting hardware required for a DIY installation ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The Transchill Arctic Black Transmission cooler kit TCB635DPK fits: Toyota Landcruiser 300 Series F33A-FTV (3.3L 6cyl) 2022 – On * Vehicles with standard bumper may require minor trimming of some plastic bumper supports. This transmission cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The TransChill Arctic Black Transmission cooler kit TCB620DPK fits: Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl) Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2009 – On models Toyota Prado 155 Series 1KD-FTV (3.0L 4cyl) Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2009 – On models This product is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The NEW 32mm 14 row Universal TransChill Arctic Black Automatic Transmission cooler kit TCBUNIDPK and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Automatic Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The TransChill Transmission cooler kit TCD602DPK (dual cooler) fits Holden Colorado models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. Designed and engineered in Australia 100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Internal tubulation for efficient heat transfer 3/8” (9 mm) push-on fittings for quick and easy installation WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. By having two coolers the TCD602DPK kit has a higher cooling capacity than the single cooler kit TC602DPK. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT) 3yr Warranty *Conditions apply

The TransChill Transmission cooler kit TCD629DPK fits Mitsubishi Triton MQ/MR 4N15 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. Designed and engineered in Australia 100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Internal tubulation for efficient heat transfer 3/8” (9 mm) push-on fittings for quick and easy installation WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. By installing a dual cooler kit you will have a higher cooling capacity than the single cooler kit TC629DPK. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT) or 2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT) 3yr Warranty *Conditions apply

The TransChill Transmission dual cooler kit TCD615DPK fits Toyota Landcruiser 200 series models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific mounting brackets Stainless steel fixing hardware ATF Hose (400psi J1019) 2x 23 row oil cooler

The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The TransChill Transmission cooler kit TC602DPK (single cooler) fits Holden Colorado models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. Designed and engineered in Australia 100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Internal tubulation for efficient heat transfer 3/8” (9 mm) push-on fittings for quick and easy installation WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. By having two coolers the TCD602DPK kit has a higher cooling capacity than the single cooler kit TC602DPK. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT) 3yr Warranty *Conditions apply

The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The Universal Ryco Pre-Filter Kit RC801DPK, comes with a 10 micron element + bracket + 12mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

The Universal Fuel Manager Pre-Filter Kit FM802DPK, comes with a 30 micron element + bracket + 12mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. It is designed specifically to cope with extreme weather conditions and poor fuel quality. PROTECT YOUR DIESEL ENGINE AGAINST WATER AND PARTICLE CONTAMINATION It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. FUEL MANAGER: HOW IT WORKS When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel. HIGH LEVEL PROTECTION As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

The Universal Ryco Pre-Filter Kit RC802DPK, comes with a 10 micron element + bracket + 12mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

The Universal Fuel Manager Pre-Filter Kit FM804DPK, comes with a 30 micron element + bracket + 8mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. It is designed specifically to cope with extreme weather conditions and poor fuel quality. PROTECT YOUR DIESEL ENGINE AGAINST WATER AND PARTICLE CONTAMINATION It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. FUEL MANAGER: HOW IT WORKS When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel. HIGH LEVEL PROTECTION As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

The Universal Ryco Pre-Filter Kit RC804DPK, comes with a 10 micron element + bracket + 8mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

Direction-Plus™ Universal ProVent® oil separator PV200DPK kit comes with drain and adapters. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. . It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance. Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DPK Kit: • Up to 200 l/min blow-by gas • Very compact design • Available with high-efficiency or ultra-efficiency medium \n• Integrated pressure regulation for crankcase • Also available with bypass valve (integrated in separation element) • Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle • Suitable for use with open or closed CCV system • Use of two ProVent 200 in parallel possible • Check valve for oil return available (recommended) 

PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION   Direction-Plus™ Universal ProVent® Ultimate Catch Can only (PV200DP) kit comes with: Inc Provent 200 Element  It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. It also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance. DOESN’T VOID YOUR WARRANTY! If you are wondering about your vehicle’s warranty, you don’t need to worry about it, because this kit doesn’t void any vehicle’s warranties. You can read an article from AAAA about Genuine Parts and Vehicle Warranty HERE. Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DP: • Up to 200 l/min blow-by gas • Very compact design • Available with high-efficiency or ultra-efficiency medium • Integrated pressure regulation for crankcase • Also available with bypass valve (integrated in separation element) • Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle • Suitable for use with open or closed CCV system • Check valve for oil return available (recommended)

Direction-Plus™ Universal ProVent® Ultimate Catch Can PV150DPK kit comes with Provent Element 150 + fittings. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance. NOTE: This kit does not include brackets. If you need the same kit with brackets go to PV151DPK Advantages of The Direction-Plus™ ProVent® Oil Separator PV150DPK Kit: • Ultra-compact design• Up to 150 l/min blow-by gas• Equipped as standard with high-efficiency medium• Pressure regulation• Available with by-pass or pressure-relief valve• Suitable for use as an open or closed CCV• Use of two ProVent 150 in parallel possible• Protection against incorrect insertion of replacement element through symmetrical design• Check valve for oil return available as option (recommended)• Cover position adjustable in steps of 3 degrees