Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles. When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - suspension bottoming out - rough ride - excessive sway & body roll - unpredictable braking characteristics - poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-35psi - Tough moulded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Toyota - Hilux GEN 5 & 6,1988 - 2004, RWD + 4WD

MSA 4x4  Landcruiser 80 Series GXL/RV Front Seat Covers- 8012 SUITS: Landcruiser 80 Series GXL/RV Includes: Front twin bucket seats FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean

MSA 4x4  Landcruiser 78 Series Front Seat Covers - 78907 SUITS: Landcruiser 78 (08/12-09/16) Troop Carrier Workmate/GXL + Landcruiser 79 (08/12-09/16) Single/Dual Cab Workmate/GX/GXL Includes: Front twin bucket and 3/4 bench seats FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean

MSA 4x4 75 Series  LC75 LandCruiser Front Seat Covers - 7502 SUITS: Landcruiser 75 Series LC75 Standard Ute + Landcruiser 75 Series LC75 Personnel Carrier Front twin bucket and 3/4 bench seats FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean

MSA 4x4 LandCruiser 100 Series Front & Second Row Seat Covers- 10002 Front bucket and 3/4 bench seats with F/D armrest cover FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean

MSA LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM-E930A-LC76-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC100-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA LANDCRUISER 76 SERIES RIGHT STORAGE DRAWER SYSTEM-E930A-LC76-RIGHT-COM SUITS: Toyota LandCrusier 76 Series Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA LANDCRUISER 300 SERIES RIGHT STORAGE DRAWER-41012 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 433mm  

MSA 4X4 LANDCRUISER 200 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC200-COM Designed from the ground up, the way a quality 4WD storage system should be. SUITS Toyota Landcruiser 200 Series GXL/VX/Sahara Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

VEHICLE DATE: 01/98-12/07 PRODUCT TYPE: Canvas Seat covers SUITS: Landcruiser 100 Series GXL/RV (Seat Covers Unavailable for GXV Models) Complete front and second row seat set - (10012 + 10015) FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean *Only available on select models

VEHICLE DATE: 1989-1998 PRODUCT TYPE: NON Power Fold SUITS: Toyota LandCruiser 80 Series Chrome, Manual FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty

VEHICLE DATE: 1989-1998 PRODUCT TYPE: NON Power Fold SUITS: Toyota LandCruiser 80 Series Black, Manual FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty

VEHICLE DATE: 09/2002-2009 PRODUCT TYPE: NON Power Fold SUITS: Prado 120 Series Towing Mirrors Chrome, Electric FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty