Front Runner
FRONT RUNNER TOYOTA SEQUOIA (2023-CURRENT) BASE DECK -SSDS133
$880.00
$978.00
Install the three-piece carpeted seat delete Base Deck and get your Toyota Sequoia primed for all types of gear-carrying duties. You now have a level packing surface, perfect for mounting a Fridge Slide or a stack of secured Wolf Pack Pro storage boxes.
Includes 3 base decks (1 front, 1 middle and 1 rear deck), 6 mounting brackets, installation hardware and fitting instructions.
The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Toyota Sequoia.
The decks are covered with a durable, UV resistant nylon pile carpet.
The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration.
The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow.
Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The 3rd row of seats need to be removed for installation of the base deck.
Features
Consists of:
1 x Rear Deck
1 x Middle Deck
1 x Front Deck
3 x Deck Support
3 x Front Mounting Feet
3 x Rear Mounting Feet
Installation Hardware
Fitting Instructions
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1200mm (47.2") L x 1340mm (52.8") W x 170mm (6.7") H
Weight:
20.23Kg (44.6lbs)
Front Runner
FRONT RUNNER TOYOTA SEQUOIA (2023-CURRENT) SLIMSPORT ROOF RACK KIT -KSTS002T
$1,833.00
$2,037.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2637mm (103.8") L x 1383mm (54.5") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Sequoia (2023-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KSTS002T - Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC285 - Toyota Sequoia (2023 - Current) Slimsport Rack Win
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2637mm (103.8) L x 1383mm (54.4) W x 170mm (6.7) H
Approximate Installed Weight: 45.78kg (100.93lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 46kg (101lbs)
Front Runner
FRONT RUNNER TOYOTA SEQUOIA (2023-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY -KSTS003T
$1,833.00
$2,037.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2666mm (105") x 1383mm (54.4").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Sequoia (2023-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTS003T - Toyota Sequoia(2023-Cur) Slimsport Roof Rack Kit Lightbar Ready
Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC286 - Toyota Sequoia(23-cur)Slimsport rack 40" lightbar wind faring
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2666mm (105) L x 1383mm (54.4) W x 196mm (7.7) H
Approximate Installed Weight: 45.45kg (100.2lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 270mm (11")
Length: 1700mm (67")
Height: 325mm (13")
Shipping Weight:
Weight: 47kg (103lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-CURRENT) RETRAX SLIMLINE II LOAD BED RACK KIT -KRTT958T
$1,696.00
$1,885.00
This kit creates a full-size rack that sits above your Toyota Tacomas (2005 + w/Retrax rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing Retrax cover tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT958T - Toyota Tacoma (2005-Current) Retrax Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 58.25kg (128.42lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18"); Length: 1735mm (68"); Height: 245mm (10")
Shipping Weight:
Weight: 28.6kg (63lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA 3RD GEN (2015-2023) CAB OVER CAMPER SLIMLINE II ROOF RACK KIT...
$795.00
$883.00
Get your Toyota Tacoma ready for cargo-carrying duties and adventures with this modular and lightweight roof rack. The kit consists of Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the tray to your Tacoma. The rack is compatible with over 55 accessories tailored to various sports, camping and overland gear.
This 550mm/21.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tacoma. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
KRTT011T - Toyota Tacoma 3rd Gen (2015-2023) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FATT011 - Toyota Tacoma 3rd Gen (2015-2023) Contour Rails
1x RRSTD03 - SLII Tray - 1255mm(W)X550mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 12.47kg (27.49lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 18kg (40lbs)
Front Runner
Front Runner Toyota Tacoma 3rd Gen Ditch Mount A-Pillar Light Brackets -VACC036
$44.00
$49.00
Durable spot light mounts for your Toyota Tacoma 3rd Gen.
Installs easily to the hood latch using existing factory bolts. No drilling required.
This Bracket allows fitment of various pod lights to increase field of vision at night.
Can also be used to mount small antenna's.
Sold in pairs.
Features
Consists of:
2 x Toyota Tacoma 3rd Gen Ditch Mount A-Pillar Light Brackets
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
219mm (8.6") L x 118mm (4.6") W x 58mm (2.3") H
Weight:
1kg (2.2lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA 3RD GEN DOUBLE CAB 5' (2016-2023) PRO BED RACK KIT -PBTT001T
$2,487.00
$2,763.00
Up your Toyota Tacoma's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Toyota Tacoma Double Cab 5' load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Toyota Tacoma Double Cab 5' with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001T - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBTT001S - Toyota Tacoma (2005-Current) Pro Bed Rack S
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 72.23kg (159.24lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1720mm (68")
Height: 510mm (20")
Shipping Weight:
Weight: 81kg (178lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA 3RD GEN DOUBLE CAB 5' (2016-2023) PRO BED SYSTEM -PBTT001S
$1,157.00
$1,285.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tacoma Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tacoma Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tacoma Double Cab with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001S - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT001 - Toyota Tacoma Pro Bed Rack Mounting System
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 51.4kg (113.32lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1280mm (50")
Height: 340mm (13")
Shipping Weight:
Weight: 55kg (121lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 6IN (2005-CURRENT) SLIMLINE II LOAD BED RACK KIT -KRTT962T
$1,987.00
$2,208.00
This kit creates a full-size rack that sits above your Toyota Tacomas (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT962T - Toyota Tacoma ReTrax XR 6" (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.4kg (64.82lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 34kg (75lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA (3RD GEN) 4 DOOR CREWMAX 5.5' (2022-CURRENT) PRO BED SYSTEM -PBTT002S
$1,348.00
$1,498.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tundra, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT002S - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-Current) Pro Bed System
Consisting of:
1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT002 - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 54.74kg (120.68lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1490mm (59")
Height: 340mm (13")
Shipping Weight:
Weight: 59kg (130lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA REGULAR CAB 2-DOOR UTE (1995-2000) SLIMLINE II LOAD BED RACK KIT...
$1,650.00
$1,833.00
This kit creates a full size rack that sits above your Toyota Tacoma's Regular Cab 2-Door (1995-2000) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA XTRA CAB 2-DOOR UTE (2001-CURRENT) SLIMLINE II LOAD BED RACK KIT...
$1,650.00
$1,833.00
This kit creates a full size rack that sits above your Toyota Tacoma's Xtra Cab 2-Door (2001-Current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA ACCESS CAB 2-DOOR UTE (1999-2006) SLIMLINE II LOAD BED RACK KIT...
$1,679.00
$1,865.00
This kit creates a full size rack that sits above your Toyota Tundra Access Cab 2-Door (1999-2006)'s truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA CREW CAB 4-DOOR UTE (2007-CURRENT) SLIMLINE II LOAD BED RACK KIT...
$1,679.00
$1,865.00
This kit creates a full size rack that sits above your Toyota Tundra Crew Cab 4-Door's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Bakkie Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA CREW MAX UTE (1999-CURRENT) SLIMLINE II LOAD BED RACK KIT -KRTT952T
$1,679.00
$1,865.00
This kit creates a full size rack that sits above your Toyota Tundra Pickup Truck (1999-Current)'s truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.While Front Runner racks and mounting systems have been engineered and built to hold 660 lbs/299kgs, this may exceed your vehicle manufacturers’ recommendations. Until all vehicle components are made as off-road tough as Front Runner’s, we suggest contacting your vehicle maker to check load limits before aggressive loading of the rack.For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA REGULAR CAB 2-DOOR UTE (2007-CURRENT) SLIMLINE II LOAD BED RACK KIT...
$1,679.00
$1,865.00
This kit creates a full size rack that sits above your Toyota Tundra Regular Cab's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1915mm (75")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX (2015-CURRENT) SLIMSPORT ROOF RACK KIT -KSTH005T
$988.00
$1,098.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1386mm (54.6") x 1147mm (45.2").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182) for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Hilux H48 DC (2015-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack (RRAC213) is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KSTH002 - Toyota Hilux (2015-Curr) SlimSport Roof Rack Kit1x RRAC244 - Toyota Hilux H48(2015-Curr)SsportRack Wind Fairing1x RRAC971 - Protection Strip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions: 1386mm (54.6") L x 1147mm (45.2") W x 116mm (4.6") H
Approximate Installed Weight: 24.352537kg (53.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 160mm (06")
Shipping Weight:Weight: 25kg (55lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX (2015-CURRENT) SLIMSPORT ROOF RACK KIT LIGHTBAR READY -KSTH004T
$988.00
$1,098.00
This low-profile flat deck Slimsport rack has a load carrying area of 1386mm (54.6") x 1147mm (45.2").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included in the Toyota Hilux DC Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTH004T - Toyota Hilux (2015-Current) Slimsport Roof Rack Kit Lightbar ready - by Front Runner
Consisting of:
1x KSTH002 - Toyota Hilux (2022-Curr) SlimSport Roof Rack Kit
1x RRAC245 - Toyota Hilux Slimsport Rack 40" L Bar Wind Fairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.352537kg (53.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 160mm (06")
Shipping Weight:
Weight: 25kg (55lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX (2016-CURRENT) EGR ROLLTRAC LOAD BED LOAD BAR KIT -KRRT011
$544.00
$604.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Hilux when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT011 - Toyota Hilux (2016-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK017 - Roof Load Bar Pair 1475mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.08kg (17.81lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1585mm (62")
Height: 165mm (6")
Shipping Weight:
Weight: 8.6kg (19lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX (2016-CURRENT) EGR ROLLTRAC SLIMLINE II LOAD BED RACK KIT -KRRT041T
$1,725.00
$1,917.00
This kit creates a full-size rack that sits above your Toyota Hilux's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT041T - Toyota Hilux (2016-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.46kg (67.15lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 33.2kg (73lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX DC (1988-1997) LOAD BAR KIT / GUTTER MOUNT -KRTH013
$447.00
$497.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1255mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
NOTE: These load bars are for the Toyota Hilux with external rain gutters only. If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Features
KRTH013 - Toyota Hilux DC (1988-1997) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (15lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1370mm (54")
Height 180mm (7")
Shipping Weight:
Weight 8.0kg (17.6lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX LEGEND RS SLIMLINE II LOAD BED RACK KIT -KRTH013T
$1,232.00
$1,369.00
This kit creates a full size rack that sits above your Toyota Hilux Legend RS's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1156mm) and 4 feet that fit into the existing tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTH013T - Toyota Hilux Legend RS Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x FASS016 - Flat Feet (pair) / 65mm1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.29kg (51.35lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 23.8kg (52lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX N50/N60/N70 4TH GEN (1984-1988) SLIMLINE II ROOF RACK KIT -KRTH001L
$1,354.00
$1,504.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Hilux (1984-1988) contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTH001L - Toyota Hilux N50/N60/N70 4th Gen (1984-1988) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x LASS102 - No 2 Leg 130mm (Pair)
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 25.51kg (56.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 25.93kg (57lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX REVO DC (2016-2021) SLIMLINE II ROOF RACK KIT / LOW PROFILE...
$1,439.00
$1,599.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo 2016+. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTH012T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATH003 - Toyota Hilux Revo DC(2016-Current) Foot Rails/Low1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.28kg (62.35lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 28.57kg (63lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX REVO EXTENDED CAB (2016-CURRENT) SLIMLINE II ROOF RACK KIT / LOW...
$1,076.00
$1,196.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTH022T - Toyota Hilux Revo Extended Cab (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATH006 - Toyota Hilux Revo ExCab(2016-Curr) Foot Rails/Low1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.78kg (45.81lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 275mm (11")
Shipping Weight:
Weight: 23kg (51lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 78 3-DOOR WAGON LOAD BAR KIT / GUTTER MOUNT -KRTL038
$501.00
$557.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTL038 - Toyota Land Cruiser 78 3-Door Wagon Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRAC044 - SLAT TO LOAD BAR CONVERSION END CAP KIT - by Front Runner
2 x RRSS1425 - 1425mm Slat - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1545mm (61")
Height 175mm (7")
Shipping Weight:
Weight 8.3kg (18.4lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX REVO DC (2016-CURRENT) TRACK AND FEET SLIMLINE II ROOF RACK KIT...
$1,426.00
$1,584.00
This kit consists of two (4) x Tent Brackets
Works with both Front Runner Roof Racks and Front Runner Load Bars and fits a wide variety of hard shell tents including various ranges from James Baroud and Autohome.
These brackets let you mount your James Baroud or Autohome tents with the proper lateral support, even if your rack is narrower or wider than your tent base.
When fitting a James Baroud or Autohome tent to a rack that is smaller (narrower, shorter or both) than your tent base footprint, the included spacer raises the mounting height of the tent so it rests on the edge of the racks side profiles for full support.
When mounted to a rack that is larger (longer and wider) than your tent base footprint, the brackets position your tent flush on the rack for full support and use of the included spacer isnt required.
Supplied with all installation hardware and fitting instructions.
Features
Consists of:
4 x Tent Brackets
4 x James Baroud Channel Plates
4 x Auto Home Channel Plates
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions: (Per Bracket)
140mm (5.5") L x 23.5mm (0.9") W x 81mm (3.2") H
Weight: (Per Pair of Brackets)
1.6kg (3.5lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX REVO DOUBLE CAB (2016-CURRENT) PRO BED RACK KIT -PBTH001T
$2,449.00
$2,721.00
Up your Toyota Hilux Revo's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Toyota Hilux Revo Pro load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/ Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Toyota Hilux Revo Pro with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTH001T - Toyota Hilux Revo Double Cab (2016-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBTH001S - Toyota Hilux Revo Pro Bed Rack (2016 - Current) Pr
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 70.3kg (154.98lbs)
Shipping Dimensions:
Width: 640mm (25")
Length: 1720mm (68")
Height: 470mm (19")
Shipping Weight:
Weight: 82kg (180lbs)
Front Runner
FRONT RUNNER TOYOTA HILUX REVO DOUBLE CAB (2016-CURRENT) PRO BED RACK SYSTEM -PBTH001S
$1,119.00
$1,243.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Hilux Revo Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Hilux Revo Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Hilux Revo Double Cab with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTH001S - Toyota Hilux Revo Double Cab (2016-Current) Pro Bed Rack System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTH001 - Toyota Hilux Revo Pro Bed Rack Mounting System
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 49.53kg (109.19lbs)
Shipping Dimensions:
Width: 640mm (25")
Length: 1230mm (48")
Height: 470mm (19")
Shipping Weight:
Weight: 52kg (114lbs)
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTF051T FITS TOYOTA 4RUNNER 4TH GEN
$1,737.00
$1,930.00
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (4th Gen). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF051T - Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF003 - Toyota 4runner (2002-2008) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 30kg (65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 34.4kg (75.7lbs)
Front Runner
FRONT RUNNER SLIMSPORT ROOF RACK KIT KSTF003T FITS TOYOTA 4RUNNER 5TH GEN 2010-ON
$1,445.00
$1,606.00
This low profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") L x 1181mm (46.5").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota 4Runner (2009-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTF003T - Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit
1 x RRAC234 - TOYOTA4RUNNER SLIMSPORT RACK WIND FAIRING
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (81.57lbs)
Assembled Rack Kit Dimensions:
2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTC001L FITS TOYOTA CONDOR
$1,762.00
$1,958.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Condor contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTC001L - Toyota Condor Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.9kg (72.4lbs)
Front Runner
FRONT RUNNER KRTC002T SLIMLINE II ROOF RACK KIT FITS TOYOTA COROLLA CROSS 2020-ON
$1,321.00
$1,468.00
Ignite your Toyota Corolla Cross's spirit of adventure and transform it into a reliable gear and sports carrier with the robust Slimline II Roof Rack Kit. No drilling is needed to fit the Slimline II Tray, Foot Rails and Wind Deflector.
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Corolla Cross. It easily installs using the existing factory mounting points. No drilling required.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Only suitable for versions with OEM roof rails.
Features
KRTC002T - Toyota Corolla Cross (2020-Current) Slimline II Roof Rack Kit
Consisting of:
1x FATC001 - Toyota Corolla Cross (2020 - Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 21.6kg (47.62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 27kg (59lbs)
Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 6IN (2005-CURRENT) TRIPLE LOAD BAR KIT -KRTT966
$805.00
$895.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT966 - Toyota Tacoma ReTrax XR 6" (2005-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8kg (17.64lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1510mm (59"); Height: 150mm (6")
Shipping Weight:
Weight: 10kg (22lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA (2007-CURRENT) LOAD BED LOAD BARS KIT -KRTT951T
$514.00
$571.00
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pairs of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tundras 2007+
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Toyota Tundra factory bed rails.
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Toyota Tundras 2007+
The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.
The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.
The sliding nut t-slots on the Load Bars allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.
Accessories can be mounted to t-slots on the top and bottom of the Load Bars.
DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!
Features
KRTT951T - Toyota Tundra (2007-Current) Load Bed Load Bars Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (15lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 240mm (9")
Length 1490mm (59")
Height 130mm (5")
Shipping Weight:
Weight 8.0kg (17.6lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA (2022-CURRENT) SLIMSPORT RACK 40IN LIGHT BAR WIND FAIRING -RRAC264
$226.00
$251.00
Lightbar wind fairing for Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab (2022-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:
4.2kg (9.3lbs)
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTH019T FITS TOYOTA HILUX REVO EXTRA CAB 2016-ON
$1,114.00
$1,238.00
This 954mm/37.6" long, full-size, Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector, two (2) Tracks, and four (4) Feet to mount the Slimline II Tray to your 2016-Current Toyota Hilux Revo Extra Cab.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty.*
Note: Drilling is required for installation.
Features
KRTH019T - Toyota Hilux Revo Extra Cab (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FASS012 - Foot Set / 40mm - 50mm
1x FASS015 - Foot Set Angled / 75mm
1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
1x TRTH007 - Toyota Revo Extra Cab (2016-Current) Tracks
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.25kg (44.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 22kg (48lbs)
Front Runner
FRONT RUNNER DOUBLE REAR SEAT VEHICLE SAFE SAFE007 FITS TOYOTA HILUX XTRA CAB 2012
$404.00
$449.00
All vehicle based adventures require you to carry valuables. Dont leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft.
The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor on both the driver side and the passenger side, yet is still easily accessible.
Manufactured with black powder coated 14 gauge, thick steel.
Designed and built in South Africa - a country where crime deterrence is an art form.
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTQ005L FITS TOYOTA QUANTUM LOW ROOF 2004-ON
$2,738.00
$3,042.00
This 2272mm/89.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Quantum/HiAce Low Roof contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTQ005L - Toyota Quantum Low Roof (2004-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 43kg (94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 620mm (24")
Length 1635mm (64")
Height 160mm (6")
Shipping Weight:
Weight 49.7kg (109.3lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER DC UTE SLIMLINE II ROOF RACK KIT -KRTL022L
$1,605.00
$1,783.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL022L - Toyota Land Cruiser 79 DC Pick-Up Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.5lbs)
Direction-Plus
DIRECTION-PLUS FUEL MANAGER PRE-FILTER + ULTIMATE CATCH CAN KIT TOYOTA HILUX N70 (FMPV613DPC)
$721.04
$801.15
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Combo Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Ultimate Catch Can Combo Kit – FMPV613DPC is designed and engineered in Australia to suit:
Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2011-2015
Vehicles with updated master cylinder only (with VSC)
HOW DOES IT WORK?
FUEL MANAGER PRE-FILTER
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW PANEL / GLASS- GWTL301
$521.00
$579.00
The Gullwing Window Panel is a replacement part for your Front Runner Gullwing Window.
This Glass Gullwing Window Panel is sold as a seperate component in order to replace a damaged window panel.
If you currently own an Aluminium Gullwing Window and would like to swap out your aluminium panel for a glass panel, the Gullwing Window's Panel has been designed to be interchangable. The glass panel blends in well to the Land Cruiser 76's exterior style and allows you to peer into your load bed area for ease of access to your goods.
Consists of:1x Glass panelMaterials used:Tinted and toughened 6mm glassProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:5.39kg (11.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW PANEL / RIGHT HAND SIDE ALUMINIUM- GWTL202
$341.00
$379.00
This Aluminium Gullwing Window Panel is sold as a seperate component in order to replace a damaged window. If you currently own a Glass Gullwing Window and would like to swap out your glass panel for an aluminium panel, the Gullwing Window's Panel has been designed to be interchangable. The aluminium panel allows for added security and blocks out view of your goods in the load bed area of your vehicle.
Consists of:1x Aluminium panelMaterials used:Black powder-coated AluminiumProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:3.16kg (7lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW PANEL / LEFT HAND SIDE ALUMINIUM- GWTL201
$341.00
$379.00
This Aluminium Gullwing Window Panel is sold as a seperate component in order to replace a damaged window.If you currently own a Glass Gullwing Window and would like to swap out your glass panel for an aluminium panel, the Gullwing Window's Panel has been designed to be interchangable. The aluminium panel allows for added security and blocks out view of your goods in the load bed area of your vehicle.
Consists of:1x Aluminium panelMaterials used:Black powder-coated AluminiumProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:3.16kg (7lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW / RIGHT HAND SIDE ALUMINIUM- GWTL004
$1,200.00
$1,333.00
The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Aluminum Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle.
Includes 2 locking latches.
Sealed with the same durable, weather resistant powder coating as the Front Runner Roof Rack.
The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window.
Drilling required for fitment.
Consists of:Steel FrameHingesGas strutsLocksSet of keysAluminium panelMaterials used:Black powder-coated high strength steelBlack powder-coated 6mm Aluminium
Product Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:13.6kg (30lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW / LEFT HAND SIDE ALUMINIUM- GWTL003
$1,200.00
$1,333.00
The Front Runner Aluminium Gullwing Window replaces the stock LEFT HAND rear window with an upward/outward opening window that is hinged at the top. Create easy access to the rear storage area of your Toyota Land Cruiser 76.
The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Aluminum Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle.
Includes 2 locking latches.
Sealed with the same durable, weather resistant powder coating as the Front Runner Roof Rack.
The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window.
Drilling required for fitment.
Consists of:Steel FrameHingesGas strutsLocksSet of keysAluminium panelMaterials used:Black powder-coated high strength steelBlack powder-coated 6mm Aluminium
Product Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:13.6kg (30lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW / RIGHT HAND SIDE GLASS- GWTL002
$1,378.00
$1,531.00
The Front Runner Glass Gullwing Window replaces the stock RIGHT HAND rear window with an upward/outward opening window that is hinged at the top. Create easy access to the rear storage area of your Toyota Land Cruiser 76.
The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Glass Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle.
Includes 2 locking latches.
The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window.
Drilling required for fitment.
Consists of:Steel FrameHingesGas strutsLocksSet of keysGlass PanelMaterials used:Black powder-coated high strength steelTinted and toughened 6mm glassProduct Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:14kg (30.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 GULLWING WINDOW / LEFT HAND SIDE GLASS- GWTL001
$1,378.00
$1,531.00
The Front Runner Glass Gullwing Window replaces the stock LEFT HAND rear window with an upward/outward opening window that is hinged at the top. Create easy access to the rear storage area of your Toyota Land Cruiser 76.
The Front Runner Gullwing window replaces the rear window of a Toyota Land Cruiser 76 allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Glass Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle.
Includes 2 locking latches.
The Toyota Land Cruiser 76 can be brought back to stock within minutes by removing and replacing with standard window.
Drilling required for fitment.
Consists of:Steel FrameHingesGas strutsLocksSet of keysGlass PanelMaterials used:Black powder-coated high strength steelTinted and toughened 6mm glassProduct Dimensions:886mm (34.9") W x 537mm (21.1") H x 53mm (2.1") DWeight:14kg (30.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 70/76 TRANSFER BOX GUARD- BGTL001
$354.00
$393.00
Black powder coated mild steel 3mm transfer gearbox protection for Land Cruiser 70/76.Please Note: This product is designed for diesel models only and does not fit the Land Cruiser 79.
Front Runner
FRONT RUNNER TOYOTA FORTUNER/HILUX REVO (2016-CURRENT) BELLY GUARD- BGTH002
$277.00
$308.00
Protects the Toyota Fortuner/Hilux's gearbox and transfer case from damage. Secures to the vehicles existing mounting points with no modification required.
Bolts to existing mounting points on the vehicle, with no modification required.
Prevents damage to vehicles' gearbox and transfer case over large obstacles and rough terrain.
Manufactured from 3mm steel and powder coated black for protection from the elements.
Installation hardware and fitting instructions included.
Consists of:1 x Belly GuardInstallation HardwareFitting InstructionsMaterials used:3mm Black powder coated steelProduct Dimensions:770mm (30.3") L x 722mm (28.4") W x 127mm (5") HWeight:11.2kg (24.7lbs)
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
