FRONT RUNNER Land Rover Defender 90/110 (1983-2016) Ladder - LALD009
$270.00
$300.00
This ladder clamps onto the gutter and bolts to the vehicle body. The bottom rung mounts below the bumper using existing holes.
The ladder conforms to the contours of the vehicle and is made with off-road tough black powder-coated high-strength steel for maximum durability and strength.
Easy installation: The top part of the ladder clamps onto the gutter and bolts to the vehicle body (drilling required).
The bottom step mounts below the bumper using existing holes.
Features
Consists of:
1 x Land Rover Defender 90 110 (1983-2016) Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated steel & aluminium
Product Dimensions:
155mm (6.1") L x 230mm (9.1") W x 721mm (28.4") H
Weight:
4.51kg (9.9lbs)
FRONT RUNNER Quick Release Tent Mount Kit / 6 Piece...
$278.10
$309.00
Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent.
Simply release the tabs on the 6 latches and lift the tent away in seconds.
No more wrenching in tight spaces during the off-season or time-consuming weekday removal of a roof top tent.
This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks.
Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*.
Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below.
6 low profile base brackets are bolted to a Front Runner Rack while 6 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set.
Secures in place with 6 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock.
Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available.
No tent modification is required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware.
Fitting instructions are included.
James Baroud Quick Release Tent Channel Set / 6 Piece or Autohome Quick Release Tent Channel Set / 6 Piece may be required for other tent brands (sold separately).
*Soft shell and hard shell tents may need additional Nut Plates, sold separately.
**IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent.
Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.
Features
Consists of:
6 x Quick Release Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
304 Stainless steel
Product Dimensions: (Per assembled bracket)
131mm (5.2") L x 142mm (5.6") W x 60mm (2.4") H
Weight:
9.9kg (21.8lbs)
POLYAIR Standard Bellows Ultimate Airbag Kit, Ford Ranger Raptor -...
$1,495.00
POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY.
NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY.
This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS
*** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS !
This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required.
Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle.
The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain.
This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design.
NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!
MSA Power Fold Towing Mirror Ford Ranger 2012-May 2022 -...
$1,485.00
$1,650.00
MSA 4X4 TM650 -Ford Ranger 2012-May 2022 Black, Electric, Heated, Indicators, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-castaluminium components
5 Year Warranty
ALPINE S2-Series 10" Dual Voice Coil Subwoofer - S2-W10D4
$269.96
$299.95
ALPINE S2-SERIES 10" DUAL VOICE COIL SUBWOOFER-S2-W10D4
Enhance your sound system’s performance with the remarkable S-Series S2-W10D4 10″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 10-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W10D4 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W10D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W10D4 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W10D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W10D4 10″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W10D4 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 600W RMS / 1800W Peak
Nominal Impedance: 4Ω
Frequency Response: 25Hz – 215Hz
Sensitivity (1W/1M): 84.9dB
Voice Coil: 66.04mm
X-Max (1-Way): 15mm
Magnet Weight: 1.81kg
NARVA 9" Ex2 Driving Lamp Kit (Single) - 72182
$699.00
The Narva 9" EX2 Driving Light Kit Pair is designed for off-road enthusiasts, fleet, and transport applications requiring reliable and powerful lighting. Part of the EX2 range, these lights feature exceptional beam pattern performance, durable construction, and easy installation. With extensive customisation options, they allow users to enhance their vehicle’s visibility and appearance while maintaining high-quality, long-lasting performance. The kit is suitable for 12V and 24V systems, providing versatility across a wide range of vehicles.
Features:
9" EX2 driving light kit (only 1 light) for 12V and 24V systems
Exceptional beam pattern performance
Robust, durable construction for long-term use
EXtra-easy installation for DIY enthusiasts
Extensive customisation options to suit vehicle style
Ideal for 4WD, fleet, and transport applications
Warranty: 7 years
Specifications
EXtra-Easy Installation:
Internal switching means only three wires need to be connected to be up and runningPatent-pendingNo components needing to be routed through the firewall unless NSW & QLD
EXceptional Performance:
Best combination between distance and widthThe 9"" pair produces 27,200 raw lumens and 19,400 effective lumens
EXpress Yourself:
8 interchangeable custom colour trims: Sunburst (Yellow), Volcano (Red), Juiced (Orange), Hyper (Green), Electric (Blue), Slate (Grey), Bubblegum (Pink) and Stealth (Black)Black ‘stealth’ lens protectors
EXceptional Build Quality:
Highest possible ingress protection (IP68 & IP69K)Virtually unbreakable polycarbonate lens - no yellowing or chipsGlass filled nylon brackets - no corrosion or rust, lighter and stronger7 year ‘no fault’ warranty
FRONT RUNNER Winch Plate - WPLA001
$152.10
$169.00
A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.
A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.This allows a winch to sit securely on the chosen vehicle.
Consists of:1 x Winch Plate
Product Dimensions:600mm (23.6") L x 190mm (7.5") W x 87mm (3.4") H
Weight:5.5kg (12.1lbs)
FATZ FABRICATION Fatz Built 9" Element Oiled Element Filter. 8...
$130.00
Fatz 9″ long Element, 4″ outlet Dry Filters
Our Fatz Build 9 Inch Dry element Air filters are quality made filters, built with Off-road driving in mind. Our paper element filters have been independently tested as per ISO 5011 standards and rated with a filtration efficiency of 99.9%. Our Filters have been supplied to our customer base for over a decade and have undergone hundreds of thousands of km of vigorous testing in vehicles from daily driven vehicles to off-road racing applications, such as Winch truck Challenges and Off-Road Rally, all with great results. Our 9″ element filters can be supplied for general applications as well as replacements for your Fatz built Airbox. Maximum flow capacity on our Dry element 9″ filters are 1080CFM as tested. The Pod design offers many advantages over OEM panel filters. With a very secure sealing design to the Airbox outlet, the filter will not cause a leak when under heavy suction in a clogged state. If the filter element is a quality material, there is no way for dust to bypass the filter under normal operating conditions. Add an additional filter to your Airbox order to have a convenient swap out option when on the road. Purchase our Fatz Build 9 Inch Air Filters and experience the difference.
(*Air Flow data should be used as comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
CLEARVIEW Chrome Next Gen Towing Mirrors Heat, Camera, Power-Fold, Bsm,...
$1,471.50
$1,635.00
CLEARVIEW Next Gen Towing Mirrors Heat, Camera, Power-Fold, BSM, Indicators, Electric Mitsubishi Pajero Sport - Exceed & GSR Variants Nov 2009-CVNG-MT-2015-HVFSIEC
Mirror Features: Heat, Camera, Power-Fold, BSM, Indicators, Electric
Finish: Chrome
Suits:Mitsubishi Pajero Sport - Exceed & GSR Variants Nov 2009
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
CLEARVIEW Black Next Gen Towing Mirrors Power-Fold, Bsm, Oat Sensor,...
$1,372.50
$1,525.00
CLEARVIEW Next Gen Towing Mirrors Power-Fold, BSM, OAT Sensor, Indicators, Electric Ford Ranger | Mar 2023 (MY23.5) on-CVNG-FD-RE22-FSTIEB
Mirror Features: Power-Fold, BSM, OAT Sensor, Indicators, Electric
Finish: Black
Suits:Ford Ranger | Mar 2023 (MY23.5) on
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
CLEARVIEW Black Next Gen Towing Mirrors Electric Toyota Landcruiser 80...
$796.50
$885.00
CLEARVIEW Next Gen Towing Mirrors Electric Toyota LandCruiser 80 Series 1990-1998-CVNG-TL-80S-EB
Mirror Features: Electric
Finish: Black
Suits:Toyota LandCruiser 80 Series 1990-1998
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
CLEARVIEW Black Compact Towing Mirrors Indicators, Electric Ford Territory 2004-2018...
$841.50
$935.00
CLEARVIEW Compact Towing Mirrors Indicators, Electric Ford Territory 2004-2018-CVC-FD-TY-IEB
Mirror Features: Indicators, Electric
Finish: Black
Suits:Ford Territory 2004-2018
The Clearview Compact Towing Mirrors are the perfect solution for those looking for a sleek| space-saving design without sacrificing functionality. These mirrors extend a full 180mm to provide a wider field of vision| essential for safe towing and reversing. Designed to slide back into the vehicle when not in use| they maintain a low profile similar to standard OEM mirrors.
Large convex mirror to reduce blind spots
Sleek design that retracts when not in use
Durable and ADR compliant
Available in black| chrome| and raw finishes
Why You Should Buy:
Ideal for smaller vehicles or those with limited space| the Compact Towing Mirrors offer enhanced visibility and safety while towing| without the bulk of larger mirrors.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
ALPINE S2-Series 10" Dual Voice Coil Subwoofer - S2-W10D2
$269.96
$299.95
ALPINE S2-SERIES 10" DUAL VOICE COIL SUBWOOFER-S2-W10D2
Enhance your sound system’s performance with the remarkable S-Series S2-W10D2 10″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models.
This subwoofer’s standout feature is its formidable 10-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W10D2 guarantees an immersive experience like never before.
Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time.
Durability is a key focus in the redesign of the S2-W10D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress.
One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W10D2 seamlessly fits into various configurations thanks to its flexible connectivity options.
What truly sets the S-Series S2-W10D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank.
In summary, the S-Series S2-W10D2 10″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W10D4 and redefine your audio experience today.
Features
Dual Voice Coil Subwoofers with Configuration Jumpers
Carbon Fiber / Poly Propylene Cone
Poly Propylene / Ceramic Dust Cap
High-Grade Strontium Ferrite Magnets
Twist-Lock Grille Mount System
High-Amplitude Multi-Roll (H.A.M.R.) Surround
Push-Type Speaker Terminals (Up to 8AWG Wire Size)
Specifications
Power Handling: 600W RMS / 1800W Peak
Nominal Impedance: 2Ω
Frequency Response: 25Hz – 215Hz
Sensitivity (1W/1M): 84.7dB
Voice Coil: 66.04mm
X-Max (1-Way): 15mm
Magnet Weight: 1.81kg
ALPINE Digital Mono High Power Amplifier - S2-A120M
$584.96
$649.95
The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.
The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.
A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
Features
Install
Terminal Layout: Two-sided
Included terminal covers
Screw terminals (for speaker and power cables)
General
Class-D Amplification (Digital)
Channel Design: Mono Channel
Side panel controls
Thermal Management Control
Top Mounted LED Power/Status Indicator
Speaker Level Input
3 turn-on modes (DC HI, Remote HI, Remote LO)
Input Channel Selector Switch for Subwoofer
Crossover: Variable Low-pass Filter (LPF)
Adjustable Gain Control
Bass EQ
Remote Bass Control (RUX-KNOB2) Ready
Specifications
RMS Power Ratings
Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 600W
Sound Tuning
Crossover: Variable LPF: 50-400Hz (-24dB/oct)
Bass EQ (+12dB)
General
Power Requirements: 14.4 V.DC (9 – 16 V allowable)
Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
High Level Input with automatic power on
Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
THD+N (@ 10W into 4 Ohms): <0.03%
Damping Factor: >750
Weight: 4.0kg
Dimensions
Heat Sink (WxHxD) mm: 352 x 57 x 210
ALPINE Powerpack Amplifier - KTP-445U
$269.96
$299.95
The KTP-445U Universal Power Pack amplifies the head unit power output, resulting in up to a 150 percent power increase over the original power from the head unit’s built-in amplifier. Add higher output and more dynamic response with this easy-to-install head unit power upgrade.
Features
For aftermarket and factory installed systems
Compact size
4-channel Amplifier
45 Watts x 4 @ 4Ω/2Ω
90 Watts x 2 @ 4Ω Bridged
Fuse: 15A
Specifications
Power Output
Per Channel, Ref: 14.4V, 4ohms, @ < 1% THD+N: 45W RMS x 4
Per Channel, Ref: 14.4V, 2ohms, @ < 1% THD+N: 45W RMS x 4
S/N Ratio
IHF A-wtd + AES-17, Ref: 1 W into 4 ohms: 82dB
IHF A-wtd + AES-17, Ref: Rated Power into 4 ohms: 98dB
Frequency Response
+0 / -3 dB, Ref: 1 W into 4 ohms 15Hz – 45kHz
Input Impedance
> 10k ohms
Input Sensitivity
Ref: Rated Power into 4 ohms, RCA Inputs: 0,2 – 4,0 V
Ref: Rated Power into 4 ohms, Speaker Level Inputs: 0,5 – 10,0 V
Crossover
Ch 1 / 2: Selectable HPF (-12 dB/oct.), defeatable: Off/60/80/120Hz
Ch 3 / 4: Selectable HPF (-12 dB/oct.), defeatable: Off/60/80/120Hz
Dimensions
Width: 189.0mm (7-7/16”)
Height: 38.2mm (1-1/2”)
Depth: 64.5mm (2-1/2”)
Weight: 0.8kg (1,5lbs)
FRONT RUNNER Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit -...
$974.70
$1,083.00
Turn your reliable Isuzu into a gear carrier of note with this low-profile Slimsport Rack. The rack is extremely quiet, thanks to the included wind fairing. You can fit our wide range of accessories to the top of the rack.
This low profile flat deck Slimsport rack has a load-carrying area of 1415mm (55.7") x 1141mm (44.9").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: No drilling required
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSID003T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray
1x RRAC310 - Isuzu Dmax (2020-Current) Slimsport Rack Wind Fair
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1415mm (55.7") L x 1141mm (45") W x 121mm (4.8") H
Approximate Installed Weight: 19.68kg (43.39lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 27kg (59lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
