Top Rated 4WD Accessories

This low-profile flat deck Slimsport Tray has a load-carrying area of 2280mm (89.8") x 1289mm (50.7"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for all Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (both sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables are not compatible with the Slimsport rack kit range Fits to existing factory holes with factory rails removed. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSTL002T - Toyota Land Cruiser 100 Slimsport Roof Rack Kit Consisting of: 1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray 1x RRAC281 - Toyota Lnd Crusr 100 series Slmsprt Wind Fairing 1x RRAC971 - Protection Strip Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 37.43kg (82.52lbs) Assembled Rack Kit Dimensions: 2280mm (89.8") L x 1289mm (50.7") W x 150mm (5.9") H The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 220mm (9") Shipping Weight: Weight: 40kg (88lbs)

For showers, drinking, and cooking, this universal 67l (17.7gal) water tank mounts to any flat surface. Moulded with slots along the sides of the tank to accommodate tie-down straps. 67l (17.7gal) capacity. Made from food grade polyethylene and is BPA free. This tank has plastic pipe fittings and The Water Tank Hose Kit for this water tank is sold separately. Features Material used: Tank: BPA-free polyethylene Fittings: Plastic Capacity: 67l (17.7gal) Product Dimensions: L 950mm (37.4") x H 260mm (10.2") x W 300mm (11.8") Weight: 6.98kg (15.4lbs) Special Notes SKU: CR1038-GY-COMP

Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent. Simply release the tabs on the 6 latches and lift the tent away in seconds. No more wrenching in tight spaces during the off-season or time-consuming weekday removal of a roof top tent. This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks. Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*. Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below. 6 low profile base brackets are bolted to a Front Runner Rack while 6 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set. Secures in place with 6 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock. Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack. The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available. No tent modification is required. Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes. Supplied with all required mounting hardware. Fitting instructions are included. James Baroud Quick Release Tent Channel Set / 6 Piece or Autohome Quick Release Tent Channel Set / 6 Piece may be required for other tent brands (sold separately). *Soft shell and hard shell tents may need additional Nut Plates, sold separately. **IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent. Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support. Features Consists of: 6 x Quick Release Brackets Installation Hardware Fitting Instructions Materials used: Black powder coated steel 304 Stainless steel Product Dimensions: (Per assembled bracket) 131mm (5.2") L x 142mm (5.6") W x 60mm (2.4") H Weight: 9.9kg (21.8lbs)

TWIN 3″ INTO SINGLE 4″ EXHAUST FOR TOYOTA 200 SERIES 4.5L LANDCRUISER: 10/2015… FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. PERFORMANCE GAIN: 16KW / 52NM Whether used for towing, touring or daily driving, the 200 Series Landcruiser is one of the most capable 4WD’s on the market, and Torqit’s 200 Series DPF Back Performance Exhaust has the strength and quality to back it up. Renowned for our Landcruiser exhausts, Torqit has put in extensive R & D to produce one of the thickest and most durable mandrel bent systems of its kind in Australia. Manufactured from 304 grade brushed stainless steel, our exhausts are fully mandrel bent and up to 2mm thick to prevent cracking when traversing rough terrain. The three-bolt, laser cut flanges are also manufactured from 304 grade stainless steel, and welded inside and out for extra strength. This 200 Series exhaust is a twin 3” system which exits through a single 4” tailpipe. The thickness of the steel and the 4” tailpipe add depth and rumble to the note, a large improvement on the factory exhaust. To further amplify and deepen the note, this 200 Series exhaust comes standard with an x-pipe. The x-pipe redirects the exhaust gases through a less congested path and balances out uneven exhaust pulses. This increases the sound output, reduces back pressure, and increases the engine efficiency and fuel economy.* As the owner of a vehicle fitted with a DPF, no doubt you are aware there are few things which damage a diesel engine quicker than excessive Exhaust Gas Temperatures (EGT’s). By improving the flow of gases, Torqit’s 200 Series Performance Exhaust has been developed to lower these EGT’s and help your vehicle breathe better and live longer. The Torqit 200 Series Performance Exhaust bolts directly onto the back of the DPF, and keeps your vehicle compliant with all warranty and insurance regulations. It is the ideal alternative to deleting your DPF, without the legal ramifications. Combine this 200 Series system with additional upgrades to completely transform your vehicles’ performance PERFORMANCE EXHAUST FEATURES Thick Stainless SteelAn exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone.  304 Grade Stainless SteelThe highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.  Internal & External WeldsHigh quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter. Mandrel Bent SystemTorqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment.  SINGLE EXIT PERFORMANCE EXHAUST INSTALLATION Torqit’s Twin into Single Exit 200 Series Performance Exhaust is a DIY full bolt together system, and comes with detailed fitting instructions. It does not require a hoist for install, and can be fitted in approximately one hour on your driveway. It comes with a full fitment kit and requires only a basic socket set and spanners. FEATURES Brushed stainless steel tube up to 2mm thick Premium 304 grade stainless steel Fully mandrel bent system Internal and external welds Three-bolt laser cut flanges Heavy-duty wrap around brackets Stainless steel resonator/muffler Deep note without cabin drone DIY bolt together install Ten year product warranty

DESIGNED & TESTED FOR TOWING! Towing Mirrors no longer need to look ugly.  The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror adjuster. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.  The MSA 4x4 patented Towing Mirrors are manufactured extremely tough and WILL NOT VIBRATE ON TOUGH ROADS! Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.  FEATURES:    Four different mirror positions     Large, single mirror lens     Adjustable viewing angles     Vertical and horizontal adjustment     Unique pivot design     Fold inwards or outwards     ADR Compliant     Injection moulded and die-cast aluminium components

Get your Isuzu D-Max ready for all adventure types and gear-carrying assignments with this low-profile Slimsport Roof Rack Kit/Lightbar Ready. Now, you can mount various accessories onto the rack's super-strong slats via the T-slots. This low-profile flat deck Slimsport rack has a load carrying area of 1410mm (55.5") x 1141mm (44.9"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately). Included in the Isuzu D-Max (2020-Current) Slimsport Rack is the Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Note: Drilling required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range. Note: Only compatible with rear factory antenna or when no front antenna is fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSID002T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of: 1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray 1x RRAC309 - Isuzu D-Max (20-current) Lightbar Windfairing Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 18.75kg (41.34lbs) Assembled Rack Kit Dimensions: 1410mm (55.5") L x 1140mm (44.9") W x 125mm (4.9") H   The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 220mm (9") Shipping Weight: Weight: 24kg (53lbs)

Turn your reliable Isuzu into a gear carrier of note with this low-profile Slimsport Rack. The rack is extremely quiet, thanks to the included wind fairing. You can fit our wide range of accessories to the top of the rack. This low profile flat deck Slimsport rack has a load-carrying area of 1415mm (55.7") x 1141mm (44.9"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: No drilling required All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSID003T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit Consisting of: 1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray 1x RRAC310 - Isuzu Dmax (2020-Current) Slimsport Rack Wind Fair Material Used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 1415mm (55.7") L x 1141mm (45") W x 121mm (4.8") H  Approximate Installed Weight: 19.68kg (43.39lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 220mm (9") Shipping Weight: Weight: 27kg (59lbs)

ALPINE S2-SERIES 12" DUAL VOICE COIL SUBWOOFER-S2-W12D2 Enhance your sound system’s performance with the remarkable S-Series S2-W12D2 12″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 12-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W12D2 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W12D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W12D2 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W12D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W12D2 12″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W12D2 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 2Ω Frequency Response: 23Hz – 215Hz Sensitivity (1W/1M): 85.7dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

CLEARVIEW Compact Towing Mirrors Manual Toyota Hi-Lux 2005 (MY05) - 2014 (MY14)-CVC-TH-SR-MB Mirror Features: Manual Finish: Black Suits:Toyota Hi-Lux 2005 (MY05) - 2014 (MY14) The Clearview Compact Towing Mirrors are the perfect solution for those looking for a sleek| space-saving design without sacrificing functionality. These mirrors extend a full 180mm to provide a wider field of vision| essential for safe towing and reversing. Designed to slide back into the vehicle when not in use| they maintain a low profile similar to standard OEM mirrors. Large convex mirror to reduce blind spots Sleek design that retracts when not in use Durable and ADR compliant Available in black| chrome| and raw finishes Why You Should Buy: Ideal for smaller vehicles or those with limited space| the Compact Towing Mirrors offer enhanced visibility and safety while towing| without the bulk of larger mirrors. Why Clearview Accessories? Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.

This ladder clamps onto the gutter and bolts to the vehicle body. The bottom rung mounts below the bumper using existing holes. The ladder conforms to the contours of the vehicle and is made with off-road tough black powder-coated high-strength steel for maximum durability and strength. Easy installation: The top part of the ladder clamps onto the gutter and bolts to the vehicle body (drilling required). The bottom step mounts below the bumper using existing holes. Features Consists of: 1 x Land Rover Defender 90 110 (1983-2016) Ladder Installation Hardware Fitting Instructions Materials used: Black Powder coated steel & aluminium Product Dimensions: 155mm (6.1") L x 230mm (9.1") W x 721mm (28.4") H Weight: 4.51kg (9.9lbs)

POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY. NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY. This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS *** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS ! This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself. As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required. Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle. The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain. This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design. NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!

VEHICLE DATE: 2015-Current PRODUCT TYPE: Power Fold SUITS: Mitsubishi Pajero Sport Chrome, Electric, Indicators, Power Fold FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty MSA POWER FOLD™ is a trademark used under licence

MSA 4X4 TM650 -Ford Ranger 2012-May 2022 Black, Electric, Heated, Indicators, Powerfold FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-castaluminium components 5 Year Warranty 

Unleash a world of adventure for your Nissan X-Trail/Rogue when you fit Front Runner’s tough Slimline II Roof Rack Kit. You can now access 55+ accessories made for this reliable rack system. Carrying your sports or camping gear has never been easier. This 1358mm/53.5” long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan X-Trail/Rogue. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:1x FANX003 - Nissan X-Trail (23-Current) Foot Rail1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 22.16kg (48.85lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 565mm (22")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 26kg (57lbs)

ALPINE S2-SERIES 10" DUAL VOICE COIL SUBWOOFER-S2-W10D4 Enhance your sound system’s performance with the remarkable S-Series S2-W10D4 10″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 10-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W10D4 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W10D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W10D4 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W10D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W10D4 10″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W10D4 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 4Ω Frequency Response: 25Hz – 215Hz Sensitivity (1W/1M): 84.9dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

The Narva 9" EX2 Driving Light Kit Pair is designed for off-road enthusiasts, fleet, and transport applications requiring reliable and powerful lighting. Part of the EX2 range, these lights feature exceptional beam pattern performance, durable construction, and easy installation. With extensive customisation options, they allow users to enhance their vehicle’s visibility and appearance while maintaining high-quality, long-lasting performance. The kit is suitable for 12V and 24V systems, providing versatility across a wide range of vehicles. Features: 9" EX2 driving light kit (only 1 light) for 12V and 24V systems Exceptional beam pattern performance Robust, durable construction for long-term use EXtra-easy installation for DIY enthusiasts Extensive customisation options to suit vehicle style Ideal for 4WD, fleet, and transport applications Warranty: 7 years Specifications EXtra-Easy Installation: Internal switching means only three wires need to be connected to be up and runningPatent-pendingNo components needing to be routed through the firewall unless NSW & QLD EXceptional Performance: Best combination between distance and widthThe 9"" pair produces 27,200 raw lumens and 19,400 effective lumens EXpress Yourself: 8 interchangeable custom colour trims: Sunburst (Yellow), Volcano (Red), Juiced (Orange), Hyper (Green), Electric (Blue), Slate (Grey), Bubblegum (Pink) and Stealth (Black)Black ‘stealth’ lens protectors EXceptional Build Quality: Highest possible ingress protection (IP68 & IP69K)Virtually unbreakable polycarbonate lens - no yellowing or chipsGlass filled nylon brackets - no corrosion or rust, lighter and stronger7 year ‘no fault’ warranty

​A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle. ​A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.This allows a winch to sit securely on the chosen vehicle. Consists of:1 x Winch Plate Product Dimensions:600mm (23.6") L x 190mm (7.5") W x 87mm (3.4") H Weight:5.5kg (12.1lbs)

CLEARVIEW Next Gen Towing Mirrors Heat, Camera, Power-Fold, BSM, Indicators, Electric Mitsubishi Pajero Sport - Exceed & GSR Variants Nov 2009-CVNG-MT-2015-HVFSIEC Mirror Features: Heat, Camera, Power-Fold, BSM, Indicators, Electric Finish: Chrome Suits:Mitsubishi Pajero Sport - Exceed & GSR Variants Nov 2009 The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features. Features: Large flat top mirror and smaller convex bottom mirror Extends 180mm for optimal towing visibility Power fold and manual fold options Available in black| chrome| and raw finishes Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring Why You Should Buy: With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road. Why Clearview Accessories? Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.

CLEARVIEW Next Gen Towing Mirrors Power-Fold, BSM, OAT Sensor, Indicators, Electric Ford Ranger | Mar 2023 (MY23.5) on-CVNG-FD-RE22-FSTIEB Mirror Features: Power-Fold, BSM, OAT Sensor, Indicators, Electric Finish: Black Suits:Ford Ranger | Mar 2023 (MY23.5) on The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features. Features: Large flat top mirror and smaller convex bottom mirror Extends 180mm for optimal towing visibility Power fold and manual fold options Available in black| chrome| and raw finishes Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring Why You Should Buy: With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road. Why Clearview Accessories? Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.

CLEARVIEW Next Gen Towing Mirrors Manual Toyota LandCruiser 70 Series 2021 - Aug 2023-CVNG-TL-70S-MB Mirror Features: Manual Finish: Black Suits:Toyota LandCruiser 70 Series 2021 - Aug 2023 The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features. Features: Large flat top mirror and smaller convex bottom mirror Extends 180mm for optimal towing visibility Power fold and manual fold options Available in black| chrome| and raw finishes Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring Why You Should Buy: With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road. Why Clearview Accessories? Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.

CLEARVIEW Next Gen Towing Mirrors Electric Toyota LandCruiser 80 Series 1990-1998-CVNG-TL-80S-EB Mirror Features: Electric Finish: Black Suits:Toyota LandCruiser 80 Series 1990-1998 The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features. Features: Large flat top mirror and smaller convex bottom mirror Extends 180mm for optimal towing visibility Power fold and manual fold options Available in black| chrome| and raw finishes Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring Why You Should Buy: With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road. Why Clearview Accessories? Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.

CLEARVIEW Compact Towing Mirrors Indicators, Electric Ford Territory 2004-2018-CVC-FD-TY-IEB Mirror Features: Indicators, Electric Finish: Black Suits:Ford Territory 2004-2018 The Clearview Compact Towing Mirrors are the perfect solution for those looking for a sleek| space-saving design without sacrificing functionality. These mirrors extend a full 180mm to provide a wider field of vision| essential for safe towing and reversing. Designed to slide back into the vehicle when not in use| they maintain a low profile similar to standard OEM mirrors. Large convex mirror to reduce blind spots Sleek design that retracts when not in use Durable and ADR compliant Available in black| chrome| and raw finishes Why You Should Buy: Ideal for smaller vehicles or those with limited space| the Compact Towing Mirrors offer enhanced visibility and safety while towing| without the bulk of larger mirrors. Why Clearview Accessories? Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.

ALPINE S2-SERIES 12" DUAL VOICE COIL SUBWOOFER-S2-W12D4 Enhance your sound system’s performance with the remarkable S-Series S2-W12D4 12″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 12-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W12D4 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W12D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W12D4 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W12D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W12D4 12″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W12D4 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 4Ω Frequency Response: 23Hz – 215Hz Sensitivity (1W/1M): 86.2dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

ALPINE S2-SERIES 10" DUAL VOICE COIL SUBWOOFER-S2-W10D2 Enhance your sound system’s performance with the remarkable S-Series S2-W10D2 10″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 10-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W10D2 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W10D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W10D2 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W10D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W10D2 10″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W10D4 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 2Ω Frequency Response: 25Hz – 215Hz Sensitivity (1W/1M): 84.7dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

ALPINE R2-SERIES 12" HALO SUBWOOFER ENCLOSURE-R2-SB12V A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system to R-Series amplifiers and R-Series speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB12V is designed for amplifier compatibility with 20hm loads. Optimal Sound Performance The R2-SB12V delivers incredible low-down, ground-pounding bass for the ultimate sound experience. The USA designed enclosure features an optimised vent and rounded internal port edges that maximises output performance of the subwoofer. The result is a higher total sound output for deep, powerful and accurate bass coupled with R-Series renowned reliability and endurance. Built to Perform Without compromise the R2-SB12V is built from high-quality construction materials to achieve a custom look, without the custom work. Made from 3/4-inch medium density fibreboard (MDF) with internal edge bracing, the R-SB12V is sturdy and rugged, yet stylish with a premium black carpet covering and brushed aluminium finish on the metallic front baffle.   Tuned for R-Series The R2-SB12V includes a preloaded R-Series R2-W12D4 12-inch subwoofer that’s tuned to 35Hz for optimised performance with Alpine R-Series sound system speakers and amplifiers. Dual 4Ω voice coils are wired in parallel for a 2Ω load that’s compatible with the R-Series R-A75M Mono Power Amplifier. Gold-plated binding post terminals allow for speaker wire, ring terminal, or quick disconnect banana plug connections.   Stand Out In the Crowd The Alpine Halo platform modernises the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and silver accent of the Alpine Halo Display, the R2-SB12V shares the same design cues, with a curved silver trim and a metallic front baffle. The R2-SB12V offers not only premium sound performance, but also elevates the interior of the vehicle for a subwoofer you can be proud to show off.   KTX-H12 Linking Kit  ProLink™ is unique to Alpine and allows you to link two R2-SB12V enclosures together using an optional KTX-H12 Linking Kit (sold separately) to create a dual subwoofer-enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer immediately if more bass is desired, or gives you the capability to upgrade your bass later-on. Features Includes Preloaded R-W12D4 12” R-Series Subwoofer Ground-breaking Alpine Halo Design ProLink™ Ported Enclosure Design USA Designed for Optimal Bass and Sound Quality Performance CARB compliant 3/4-inch MDF construction Premium Black Carpet Silver Alpine Embossed Side Logo Badge Brushed Aluminium Finished Metallic Front Baffle KTX-H12 Linking Kit Ready   Specifications Peak Power Handling: 2250W RMS Power Handling: 750W High-Excursion Overhung Voice Coil Configuration 65.5mm Voice Coil with High-Temp 4-Layer DVC Winding on Aluminium Former Stacked High-Grade Strontium Ferrite Magnets Cast Aluminium Frame Progressive Spider with Reinforced Layer Tinsel Leads Airflow Management & Heat Transfer System Optimised Dual Flare Pole Vent Concealed Mount Gasket Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap) High-Amplitude Multi-Roll (HAMR) Surround Dimensions: 17” W x 14.625” H x 15” D Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) 12 Gauge OFC Speaker Box Wire Binding Post Terminal Cup Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation) Nominal Impedance: 4Ω+4Ω Dual Voice Coil 2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit) Frequency Response: 24Hz-200Hz Vented Enclosure Tuning Frequency: 35Hz Sensitivity 84dB   Unique ProLink™ Design  When you’re looking to make a noticeable impact in your sound system, you add a subwoofer that will bring out the low-end bas of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or you can build your bass with Alpine’s new ProLink™ technology.

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget. The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat. A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. Features Install Terminal Layout: Two-sided Included terminal covers Screw terminals (for speaker and power cables) General Class-D Amplification (Digital) Channel Design: Mono Channel Side panel controls Thermal Management Control Top Mounted LED Power/Status Indicator Speaker Level Input 3 turn-on modes (DC HI, Remote HI, Remote LO) Input Channel Selector Switch for Subwoofer Crossover: Variable Low-pass Filter (LPF) Adjustable Gain Control Bass EQ Remote Bass Control (RUX-KNOB2) Ready Specifications RMS Power Ratings Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1200W Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 600W Sound Tuning Crossover: Variable LPF: 50-400Hz (-24dB/oct) Bass EQ (+12dB) General Power Requirements: 14.4 V.DC (9 – 16 V allowable) Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V High Level Input with automatic power on Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz THD+N (@ 10W into 4 Ohms): <0.03% Damping Factor: >750 Weight: 4.0kg Dimensions Heat Sink (WxHxD) mm: 352 x 57 x 210  

The KTP-445U Universal Power Pack amplifies the head unit power output, resulting in up to a 150 percent power increase over the original power from the head unit’s built-in amplifier. Add higher output and more dynamic response with this easy-to-install head unit power upgrade. Features For aftermarket and factory installed systems Compact size 4-channel Amplifier 45 Watts x 4 @ 4Ω/2Ω 90 Watts x 2 @ 4Ω Bridged Fuse: 15A Specifications Power Output Per Channel, Ref: 14.4V, 4ohms, @ < 1% THD+N: 45W RMS x 4 Per Channel, Ref: 14.4V, 2ohms, @ < 1% THD+N: 45W RMS x 4 S/N Ratio IHF A-wtd + AES-17, Ref: 1 W into 4 ohms: 82dB IHF A-wtd + AES-17, Ref: Rated Power into 4 ohms: 98dB Frequency Response +0 / -3 dB, Ref: 1 W into 4 ohms 15Hz – 45kHz Input Impedance > 10k ohms Input Sensitivity Ref: Rated Power into 4 ohms, RCA Inputs: 0,2 – 4,0 V Ref: Rated Power into 4 ohms, Speaker Level Inputs: 0,5 – 10,0 V Crossover Ch 1 / 2: Selectable HPF (-12 dB/oct.), defeatable: Off/60/80/120Hz Ch 3 / 4: Selectable HPF (-12 dB/oct.), defeatable: Off/60/80/120Hz Dimensions Width: 189.0mm (7-7/16”) Height: 38.2mm (1-1/2”) Depth: 64.5mm (2-1/2”) Weight: 0.8kg (1,5lbs)

Elevate your Toyota HiAce's gear-carrying game to unparalleled levels when you install Front Runner's low-profile Slimpro Van Kit. It's a great option for tradesmen such as plumbers and electricians. The versatile and adaptable roof rack has ample packing space so you can live the van life and not worry about where to put your gear.  Compatible with the Toyota HiAce LWB/SLWB High Roof (2019-Current) vans with a vehicle length of 5265mm / 207.3". Load-carrying area: 2974mm (117") x 1344mm (52.9"). Six (6) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 131mm (5.2"). Compatible with most Front Runner side mount accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. All Front Runner racks are backed by a limited lifetime warranty.* Features KVTH002T - Toyota HiAce LWB/SLWB High Roof (2019-Current) Slimpro Van Rack Kit Consisting of: 2x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm 1x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 1x RRAC978 - Toyota HiAce LWB(2019-) SlimPro Rack Spacer 4x RRNS1255 - Narrow Slat / 1255mm (Pair) 1x SPVT001 - Van Rack Side Profile / 1156mm 1x SPVT004 - Van Rack Side Profile / 1762mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimension: 2975mm (177.1") L x 1345mm (53") W x 135mm (5.3") H Approximate Installed Weight: 28.57kg (62.99lbs) Toyota Hiace Van Rack Kit heights are adjustable from 85mm (Z bracket inverted) to 131mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 445mm (18") Length: 1770mm (70") Height: 160mm (6") Shipping Weight: Weight: 35kg (77lbs)

The safe is bolted to the body of the vehicle and the original centre console reinstalled to the top of the safe. Installs easily using supplied installation kit and installation guide. This robust safe is manufactured with 2mm thick mild steel and a tamper proof cam lock. Powder coated black. Carpet lined. Note: Not suitable for Left-hand drive vehicles. Features Consists of: 1x Under Console Safe 2x Keys supplied Installation kit Materials used: Black powder-coated mild steel with carpeted base Product dimensions: L 535mm (21.1") x W 205mm (8.1") x H 205mm (8.1") Weight: 4.3kg (9.5lbs)

Install the three-piece carpeted seat delete Base Deck and get your Toyota Sequoia primed for all types of gear-carrying duties. You now have a level packing surface, perfect for mounting a Fridge Slide or a stack of secured Wolf Pack Pro storage boxes. Includes 3 base decks (1 front, 1 middle and 1 rear deck), 6 mounting brackets, installation hardware and fitting instructions. The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Toyota Sequoia. The decks are covered with a durable, UV resistant nylon pile carpet. The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration. The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow. Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The 3rd row of seats need to be removed for installation of the base deck. Features Consists of: 1 x Rear Deck 1 x Middle Deck 1 x Front Deck 3 x Deck Support 3 x Front Mounting Feet 3 x Rear Mounting Feet Installation Hardware Fitting Instructions Materials used: Black powder-coated high strength steel Product Dimensions: 1200mm (47.2") L x 1340mm (52.8") W x 170mm (6.7") H Weight: 20.23Kg (44.6lbs)

A 40” LED Light Bar featuring 36 intense, high-performance LEDs, with OSRAM technology, that reaches a distance of 525m and delivers 6000 lumens. The 5700 Kelvin, light intensity is distributed as a combo beam pattern- near and far-field illumination. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light. To accommodate its wide range of uses, the searchlight is equipped with a durable polycarbonate lens. The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan. Individual installation is possible due to the VX1000-CB SM's double ECE certification. The 12V/24V LED light bar is ECE-compliant and versatile in application and is not limited to automotive use only. Special regulations and legislation within each country should be taken into consideration before use. Secures to your Front Runner Roof Rack with supplied RRAC217.   Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions Materials used:Black powder coated steel and aluminium mounting brackets Product Dimensions:Light Bar:1031mm (40.6") L x 67mm (2.6") D x 35mm (1.4") H Light Bar with Bracket:1070mm (42.1") L x 102mm (4") W x 58mm (2.3") H Weight:5.56kg (12.3lbs) Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)

The Front Runner Glass Gullwing Window replaces the rear window of a Defender and allows you to tilt​ up the window, creating 100% easy access to the contents of your load area.     The locking Front Runner Gullwing Window can be fitted together with the Front Runner Gullwing Box (GWDL004) to create extra gear storage possibilities.  The 6mm toughened glass with tinted laminate​ allows you to see what is stored, keeps your valuables secure, and adds a stylish finish to your vehicle's exterior.​​Note: The glass and aluminium panels for the Land Rover Defender are not interchangeable. Consists of:1x Glass gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:6mm Toughened glass with tinted laminateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1") x W 50mm (2") x H 490mm (19.3")Door Panel: L 1044mm (41.1") x H 414mm (16.3")Weight:15kg (33.1lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8

The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles. The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads! When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim All this can be mitigated by simply installing a set of Polyair Ultimate Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’ The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support! Features: - Air adjustable from 5-60psi ! - Tough molded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Mitsubishi - Pajero 2000 - on , NM, NX,

FEATURES: Made in Australia 75W LED / 8820lm (raw) for industry-leading output 21 x high-quality Lumileds LEDs that provide consistent performance LED spot reflector with the ability to use a combination modular filter 66mm slim footprint that provides multiple mounting options 3 stage operation: Full intensity, day time, or nighttime positioning options Reverse polarity voltage protection and high current waterproof connectors CISPR25 compliant, reduced radio frequency interference technology Thermal overload protection prevents light from overheating Hard-wearing UV stable powder coat finish IP69K rated / Gore® waterproof membrane to protect against water and dust Pressure diecast aluminium housing and bezel providing lightweight strength Impact-resistant polycarbonate filter for added protection 3 year warranty. PRODUCT SPECIFICATION More Information Distance: 1 lux at 939m (Pair) Effective Lumens 5764 Raw Lumens 8820 Colour Temperature 5000K CRI 70 Current Draw 5.7Amps @ 13.2V Voltage Range 10V - 32V DC Wattage 75W Ingress Protection Rating IP69K Weight 1.2kg Including Bracket

A 6 (six) step ladder that provides easy access to your Front Runner Slimpro Van rack. Secures to the side profile of the Slimpro Van Rack and to the bottom trim of the vehicle. Made from high-strength steel, aluminum and powder coated in the same durable black powder coating as all Front Runner racks. Drilling is required on the bottom trim of the vehicle. All mounting hardware and fitment guide is included. Load Capacity 110 kg / 242.5 lbs. Features Consists of: 1 x Mercedes Sprinter H1 Slimpro Van Rack Ladder Installation Hardware Fitting instructions Materials used: Black powder coated aluminum and steel Product Dimensions: 343mm (13.5") L x 235mm (9.3") W x 2066mm (81.3") H Weight: 7.6 kg (16.8 lbs)

A 7 (seven) step ladder that provides easy access to your Front Runner Slimpro Van rack. Secures to the side profile of the Slimpro Van Rack and to the bottom trim of the Mercedes Sprinter H2. Made from high-strength steel, aluminum and powder coated in the same durable black powder coating as all Front Runner racks. Drilling is required on the bottom trim of the vehicle. All mounting hardware and fitment guide is included. Load Capacity 110 kg / 242.5 lbs. Features Consists of: 1 x Mercedes Sprinter H2 Ladder Installation Hardware Fitting Instructions Materials used: Black powder coated aluminium and steel Product Dimensions: 455mm (17.9") L x 235mm (9.3") W x 2348mm (92.4") H Weight: 7.9kg (17.4lbs)

Get your Ram 1500 ready for serious gear-carrying duties with the Slimsport Roof Rack. The sleek, low-profile Slimsport Roof Rack is form-fit to complement the aesthetic of your RAM and is compatible with 55+ accessories so you can kit up for any adventure. This low-profile flat deck Slimsport rack has a load carrying area of 1660mm (65.4") x 1380mm (54.3"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim makes the rack ultra-quiet. Need a lightbar? The optional RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: Drilling required for installation. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Under Rack Tables are not compatible with the Slimsport rack kit range Features KSDR002T - RAM 1500 Slimsport Roof Rack Kit Consisting of: 1x KSDR001 - Dodge Ram 1500 Slimsport Tray 1x RRAC279 - RAM 1500 Slimsport Rack Wind Fairing Material Used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 1660mm (65.4") L x 1380mm (54.3") W x 152mm (6") H Approximate Installed Weight: 30.55kg (67.35lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 225mm (9") Shipping Weight: Weight: 34kg (75lbs)

Upgrade your Grenadier adventure by fitting this strong 4-step ladder. Roof racks are for jerry cans, recovery tracks, storage boxes, bicycles, kayaks, and a roof top tent, all of which can be easily accessed with the Ineos Grenadier Ladder.   This ladder mounts to the vehicle's OEM Mounting points on the rear door.  The ladder mimics the rugged exterior of the vehicle and is made with off-road tough black powder-coated high-strength steel for maximum durability and strength. The ladder has 4 steps. Length from the bottom step to the top step is 1147.59mm / 45.18". This ladder has a maximum load rating of 110kg /242.5lbs. Fitment guide and installation hardware included. Consists of:1 x Ineos Grenadier LadderInstallation GuideFitting Instructions Materials used:Black powder-coated high strength steelBlack powder-coated aluminiumHigh-density polyethylene Product Dimensions:1157mm (45.6") L x 208mm (8.2") W x 245mm (9.6") H Weight:4.62kg (10.2lbs) Load Rating:110kg (242lbs)