The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. Component Mid-range Size mm (in.) 70 (3) Power Handling - Peak W 100 Power Handling - Peak Note (Hi-Pass filtered @250Hz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 20 (0.8) Frequency Response Hz 180 ÷ 18k Magnet size D x d x h mm (in.) 19.7 x 0 x 2 (0.78 x 0 x 0.08) Weight of one speaker kg (lb.) 0.17 (0.37) Magnet Neodymium Cone Pressed-pulp cone with cotton fibers D mm 65 Re Ohm 3,7 Fs Hz 110 Le mH 0,12 Vas I 1 Mms g 2,9 Cms mm/N 0,7 BL T*m 2,8 Qts 0,82 Qes 1 Qms 4,6 Spl dB 88 A 87,8 mm 3,46 in. B 73 mm 2,87 in. C 50 mm 1.97 in. D 44 mm 1.73 in. E 93 mm 3.66 in. F 17 mm 0.67 in.

The MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.   Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 3 Voice Coil Ø 25 (1) Frequency Response Hz 45 ÷ 4,5k Magnet size D x d x h mm (in.) 95 x 45 x 17 (3.74 x 1.77 x 0.67) Weight of one speaker kg (lb.) 1.2 (2.65) Magnet High density flux ferrite Cone Pressed-pulp cone with cotton fibers Xmech mm (in.) ±7.5 (0.3) D mm 132 Re Ohm 2,6 Fs Hz 75 Le mH 0,28 Vas I 8 Mms g 15,1 Cms mm/N 0,3 BL T*m 5,45 Qts 0,56 Qes 0,63 Qms 5,2 Spl dB 94 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74,5 mm 2.93 in. D 64 mm 2.52 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.

Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 car audio woofers boast outstanding dispersion features and generates high SPL with compact dimensions, ensuring a wide low frequency response, even in cars with no space for a subwoofer. Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 90 Power Handling - Peak W 180 Impedance Ohm 4 Voice Coil Ø 25 (1) Frequency Response Hz 40 ÷ 5k Magnet size D x d x h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.67) Weight of one speaker kg (lb.) 1.07 (2.36) Magnet High density flux ferrite Cone Pressed-pulp cone with cotton fibers Xmech mm (in.) ±7 (0.28) D mm 132 Re Ohm 3,1 Fs Hz 70 Le mH 0,3 Vas I 9,5 Mms g 14,9 Cms mm/N 0,36 BL T*m 5,5 Qts 0,58 Qes 0,67 Qms 4,6 Spl dB 93 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74 mm 2.91 in. D 63 mm 2.48 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.

The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the threespoke anti-resonant aluminium alloy basket with vented holes.Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. 1. Neodymium magnet optimized with FEA simulations, for superior dynamics and control.2. Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.3. Extremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.4. Exponential V-cone® with optimized geometry for utmost linearity and dispersion.5. CONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.8. Junction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.9. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.10. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.11. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo. Component Mid-range Size mm (in.) 70 (3) Power Handling - Peak W 100 Power Handling - Peak Note (Hi-Pass filtered @ 250Hz - 12dB Oct.) Impedance Ohm 4 Voice Coil Ø 20 (0.8) Frequency Response Hz 200 - 20k Magnet size D x d x h mm (in.) 45 x 25 x 3,5 (1.77 x 0.98 x 0.13) Weight of one speaker kg (lb.) 0,21 (0.46) Magnet Neodymium Cone Pressed-pulp cone with cotton fibres D mm 65 Re Ohm 3,8 Fs Hz 110 Le mH 0,05 Vas I 1,1 Mms g 2,7 Cms mm/N 0,7 BL T*m 3,3 Qts 0,57 Qes 0,67 Qms 4 Spl dB 90 A 87,8 mm 3.45 in B 74 mm 2.91 in C 47 mm 1.85 in D 41,3 mm 1.62 in E 93 mm 3.66 in. F 17 mm 0.67 in.

Two-way system Cento CK 165 features the new C 26 tweeter with a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil, delivering detailed and natural reproduction of medium-high frequencies. The R&D team optimized the C 26 dispersion characteristics to maximize performance at the listening point, ensuring a natural and progressive roll-off with excellent frequency linearity. Extensive research led to the selection of SPP-M (Semi Pressed Paper-Mica) for the C 165 woofer cone, preserving the natural sound of paper while enhancing rigidity through Mica powder. 165 mm (6.5 in.) | System | 285 W | 4 Ohm The result is an excellent balance between lightness and damping for powerful, controlled sound. The oversized ferrite magnet ensures superior control even at higher excursions. The ultra-compact CCX 2 crossover includes tweeter level control (0 / +3 dB) and uses selected components for a full and engaging sound. CG 165 grilles are included, made from high-resistance ABS with metal mesh, offering excellent protection and a refined in-car appearance. Technical Specs Component System Size mm (in.) 165 (6.5) Power Handling – Continuous W 95 Power Handling – Peak W 285 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Sensitivity dB SPL 93 Frequency Response Hz 55 – 22.5k Crossover Cut-off 2.5 kHz @ 12 dB/Oct Crossover Type 2-Way Passive Crossover Woofer Weight kg (lb) 0.96 (2.12) Tweeter Weight kg (lb) 0.03 (0.07) Crossover Weight kg (lb) 0.185 (0.41) Electro-Acoustic Specs D mm 131.5 Re Ohm 3.2 Fs Hz 60 Le mH 0.2 Vas l 13.24 Mms g 13.9 Cms mm/N 0.51 BL T·m 4.9 Qts 0.59 Qes 0.69 Qms 3.9 SPL dB 93   Accessories CPG 165 GRILE- Provided High resistance ABS metal finish grille and removable metallic mesh supplied   Technologies SPP-M (Semi Pressed Paper-Mica) cone enhanced with Mica powder for an excellent balance between lightness and damping.   Features C 26:  1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances. 2. Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range. 3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations. 4. Wide range of accessories, for easy integration in OEM placements. C 165:  1. 165 mm (6.5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper- Mica) enhanced with Mica powder for an excellent balance between lightness and damping. 2. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels. 3. 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high excursion and power handling. 4. Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations. 5. Provided elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh. CCX 2:  1. Tweeter level adjustment through a three-position switch (0, +3 dB) for an optimal tone balance that can be customized by the user. 2. Low-loss factor capacitors and low resistance inductances made with pure copper, for maximum sound transparency and clear high frequencies. 3. Compact design with metallic finish for an easy installation, with air vents for efficient heat dissipation.

Pure Dynamics. Unrivalled Precision. The Focal 6.5 KM 6½″ (165 mm) woofer from the K2 Power M Series brings uncompromising performance, combining raw power, absolute control, and musical precision.Built in Focal’s French workshops, this high-end driver is engineered for enthusiasts demanding the very best in clarity, tonal balance, and dynamic expression. Like all K2 Power M components, the 6.5 KM uses Focal’s iconic aramid fibre K2 sandwich cone, enhanced with the exclusive ‘M’-profile geometry for superior dispersion and reduced mounting depth. The result is an ultra-compact, high-efficiency driver that delivers authentic, full-bodied sound in virtually any installation. K2 Technology – Precision That Performs The K2 cone is a Focal signature: an aramid-fibre composite built for unmatched rigidity and low mass.By adding the ‘M’-profile, Focal’s engineers have refined frequency response and dispersion while minimising distortion — giving your music a tighter, faster, and more accurate attack. Every detail of the 6.5 KM is designed to serve one purpose: pure, high-fidelity energy that feels as alive as it sounds. Patented TMD® Surround – Zero Distortion Originally developed for Focal’s Sopra home hi-fi series, the TMD® (Tuned Mass Damper) surround eliminates unwanted cone resonances and mechanical colouration.By stabilising the surround and suppressing deformation, the 6.5 KM achieves ultra-clean midrange detail with extraordinary linearity — even at high volumes. Progressive Spider – Dynamic Control Focal’s progressive-profile spider enhances cone control and damping, allowing for greater excursion without losing composure.This advanced suspension system ensures impeccable dynamics, transient precision, and bass authority across the entire frequency range. Modular Freedom – Your System, Your Way The K2 Power M range is designed “à la carte”, giving installers and enthusiasts the flexibility to build a truly bespoke system.Pair the 6.5 KM with the 3 KM midrange and FRAK tweeter to create an extraordinary 3-way configuration, or run it as a dedicated mid-bass driver for uncompromising accuracy. Key Features Made in France – designed and built in Focal’s acoustic labs 6½″ (165 mm) woofer – premium K2 Power M mid-bass driver Aramid fibre K2 sandwich cone – ultra-rigid, lightweight, dynamic ‘M’-profile cone – superior dispersion and reduced mounting depth Patented TMD® surround – eliminates resonance and distortion Progressive spider – improved damping and linearity Aluminium chassis – rigid, non-magnetic structure for high excursion Compact form factor – ideal for tight factory locations or custom installs Bespoke system ready – integrate seamlessly with 3 KM and FRAK drivers The K2 Legacy Lives On The Focal 6.5 KM continues the K2 Power legacy — engineering mastery, handcrafted precision, and sound that moves you.Every detail is tuned for realism, delivering the emotion, energy, and excellence that define Focal’s performance heritage. Focal 6.5 KM – Dynamic Power. Absolute Fidelity.   Sound Acoustics Product type : Woofer Loudspeakers : Woofer: 6.5″ Membrane : K2 Power Suspension technology : Tuned Mass Damper Filter : Integrated Frequency response (+/- 3dB) : 50Hz – 5kHz Maximum power : 240 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 120 W RMS Sensivity : 92.5 dB Sound Electronics RMS power : 120 W RMS Design Product Depth: 54 mm Cut-Out diameter : 165 mm Weight : 1950 g Grilles Available

Performance Meets Precision in Compact Form The 3 KM is a specialised 3-inch (80 mm) mid-range driver built for serious car audio systems that demand clarity and fidelity in tight installation spaces. As part of the K2 Power M series, it brings Focal’s premium acoustic technologies into a compact format Key Features & Specifications Aramid fibre K2 sandwich cone with M-profile – improved frequency response, better dispersion and reduced depth Patented TMD® (Tuned Mass Damper) surround – lowered distortion and improved cone stability. Rigid aluminium non-magnetic frame – high mechanical integrity. Nominal power: ~60 W RMS, peak ~120 W (various sources). Sensitivity: ~89 dB (2.83 V/1 m) with 4 Ω impedance. Frequency response: approx. 200 Hz–9 kHz (as a dedicated mid-range driver). Mounting depth: approx. 27.3 mm / 1-1/8″. 4 Ω nominal impedance Why Use It? If you’re building a custom high-fidelity car audio system, the 3 KM allows precise mid-range reproduction with high accuracy. Its compact size makes it suitable for limited spaces while maintaining premium acoustic performance. The use of the “M” profile cone ensures better dispersion and reduced installation depth — ideal for demanding installs. Installation & System Considerations Because this is a dedicated mid-range driver, you’ll need appropriate crossover filters (often active crossovers) to ensure proper integration with tweeters and woofers. Its compact depth (~27 mm) allows for flush or near-flush mounting in constrained spaces. Should be paired with other components from the K2 Power M line to maintain tonal match and performance (e.g., 6.5 KM woofer, FRAK tweeter). Ensure your amplifier and system power levels align with the RMS/peak specs to avoid under- or over-driving. Summary The Focal 3 KM mid-range driver brings audiophile-grade mid-range clarity into a compact form, leveraging top-tier technologies like the K2 sandwich cone, TMD surround, and M-profile design. If you’re seeking to elevate your car audio build with precision and performance — this is a strong choice.   Sound Acoustics Product type : Medium Loudspeakers : Medium: 3.14″ Membrane : Aluminum/magnesium with “m” profile Suspension technology : Tuned Mass Damper Medium : 3″ Filter : Integrated Frequency response (+/- 3dB) : 200Hz – 9kHz Maximum power : 120 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 60 W RMS Sensivity : 89 dB Sound Electronics RMS power : 60 W RMS Design Product Depth: 27.3 Cut-Out diameter : 80 mm Weight : 200 g Accessories Supplied with screws and mounting brackets Grilles Available

Hertz DPK165.3 Dieci Series 6-1/2" 80W RMS 2-Way Component Speaker System  The DPK165.3 speakers from the Dieci Series have improved performance through the use of new components and technical solutions and are distinguished by premium sound quality in their price category. The packaging has an additional exclusive labeling GOLD SOUND - LIMITED EDITION. DPK165.3 is equipped with the new DPT26.4 tweeters with a 26 mm Soft Tetolon dome that features very natural and detailed high frequencies. Bass / midrange speakers DPV165.3 diffuser V-cone have a low enough resonant frequency Fs of 60 Hz which ensures dense and deep bass with a standard setup. The DPCX2.3 compact passive crossovers feature an asymmetric 6/12 dB / octave configuration that is optimal for ease of implementation and linearity in phase response. High-quality low-loss 100 V ADC metallized polypropylene capacitor is installed in the high-pass filter circuit, connection terminals are also gold-plated. Features: 6.5” Component System 160W Peak Power, 80W RMS 4 Ohm Impedance 93 DB Sensitivity Soft dome tweeters with powerful neodymium magnets deliver smooth, accurate and natural sound The woofers / midrange drivers are equipped with a V-cone cone made of lightweight, compressed cellulose that has excellent internal damping characteristics The compact passive crossovers have an asymmetric 6/12 dB / octave configuration that is optimal for ease of implementation and phase linearity. Specifications: Power handling: Peak: 160W  Continuous: 80W Impedance: 4 Ohm Frequency response: 45 – 23K Hz Sensitivity: 93 dB SPL Voice coil: 25mm Woofer size: 165 mm Tweeter size: 26mm Woofer magnet: High density flux ferrite Tweeter magnet: Neodymium Woofer cone: Water-repellent pressed paper Tweeter dome: Tetolon Crossover type: Hi-pass | Lo-pass Crossover cut off: Hi-pass @ 5kHz - 12dB / Oct | Lo-pass @ 5kHz - 6dB / Oct

Your entry to high-res audio Using technology developed for their flagship F#1 Status Series, Alpine built their Next-Generation R-Series Pro Series speakers to be accessible and fun for enthusiasts who are into high-resolution audio playback. Play your high-res music files with confidence, knowing that the ultra-wide frequency response of these speakers will provide the detailed, authentic sound you're looking for.  Minimal distortion Alpine optimizes their R2-S65 6-1/2" 2-way speakers for near-perfect sound from premium sources. The combination of a highly rigid aluminum frame and a lightweight glass-fiber reinforced woofer cone keeps the sound clean. The high-amplitude multi-roll surround maximizes impact while maintaining linearity, so you'll get punch to go with the clarity. And speaking of a little more punch, Alpine ups the mid-bass output with a ferrite magnet and larger motor structure. Loud and fun All the exquisite detail you need is handled by a 1" magnesium hard dome tweeter, which contributes to the "loud and fun" sound associated with Alpine's R-Series. These speakers make a great addition to any high-powered system, thanks to power-handling up to 100 watts RMS. Hook ‘em up and play ‘em loud! Product highlights: 6-1/2" 2-way car speakers (pair) glass-fiber woofer cone with High-Amplitude Multi-Roll surround 1" magnesium hard dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz grilles included warranty: 1 year MFR # R2-S65 Item # 500R2S65 What's in the box: Two 2-way Speakers Two multi-purpose adapter rings (includes GM/Chrysler) Two grilles Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice On-line product registration information Template and specs on box Features & specs General Speaker Size 6 1/2 Driver Design 2-way Woofer Design Cone Woofer Material Glass-Fiber Woofer Surround Rubber Midrange Design --- Midrange Material --- Tweeter Design Dome Tweeter Material Magnesium Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included Black, Steel mesh, Plastic frame Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 88 Sensitivity at 2.83 volts N/A Frequency Response 65 - 40k Hz Maximum RMS Wattage 100 Peak Power Handling (Watts) 300 Top-mount Depth (Inches) 2 1/2 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 3/8 Mounting Height (Inches) 0.667 Frame Width 6.497 Frame Length 6.497

This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. GENERAL SPECIFICATIONS: Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle Steel mesh grilles are included to protect the subwoofer drivers Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 – 500W Nominal Impedance: 2 Ω Continuous Power Handling (RMS) 500 W Enclosure Type Slot-ported, Low-profile External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm

C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing. The C7-650cw component woofer is capable of operating in a 3-way system, with a midrange and tweeter, or with only a tweeter in a 2-way configuration. Engineered from the ground up, it has exceptional linear excursion capability and outstanding linearity, resulting in solid mid-bass and pure, precise, mid-range performance. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviours. Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. Made in the USA with Global Components Sold individually, with a cast-alloy grille tray, one fine mesh steel grille insert and one spiral steel grille insert DESIGN FEATURES: Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A specially shaped dust cap attaches to the cone body and the voice coil former to improve high-frequency behaviour. Suspension design: The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from a Nomex®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting the C7-650cw’s outstanding excursion capability. Motor Design: The C7-650cw employs a high-density magnetic circuit with a high-grade Y35 Strontium-ferrite magnet, and a specially machined, T-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver’s performance range. A 32 mm (1.27 inch) diameter, the overhung voice coil is employed, wound with copper wire onto a fibreglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels. Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area and our patented Elevated Frame Cooling technology. DESIGN BANDWIDTH: With 48 dB/octave filters: 50 Hz – 5 kHz With 24 dB/octave filters: 60 Hz – 5 kHz With 12 dB/octave filters: 70 Hz – 5 kHz GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 125 W Peak Music Power: 225 W Recommended Amplifier Power (RMS): 50 - 175 W / Ch. Nominal Impedance: 4 Ω Frequency Response: 50 Hz - 5 KHz ± 3 dB Voice Coil Resistance (Re): 3.114 Ω Free Air Resonance (Fs): 54.5 Hz Reference Efficiency (no): 0.304% Efficiency: 87.0 dB @ 1W / 1m | 93.0 dB @ 1W / 0.5m Sensitivity: 90.0 dB @ 2.83V / 1m Electrical “Q” (Qes): 0.669 Mechanical “Q” (Qms): 6.265 Total Speaker “Q” (Qts): 0.605 Equivalent Compliance (Vas): 0.461 cu. ft. (13.05 liters) Moving Mass (Mms): 17.679 g Mechanical Compliance (Cms): 0.000482 m/N Magnetic Strength (BL): 5.31 N/A Effective Piston Area (Sd): 21.4 sq. in. (0.013807 sq. m) One Way Linear Excursion (Xmax): 5 mm

6.5" (165 mm) Component Woofer (with Grille) Born from shared technologies used in our flagship C7 speakers, the C6-650cw component woofer benefits from vast woofer design experience and advanced modeling systems of JL Audio. Ideal for active systems, the C6-650cw component woofer features a proprietary cast alloy frame outfitted with our Elevated Frame Cooling™ technology and a DMA-optimized motor system to generate outstanding midbass impact with ultralow distortion. Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor, such as the JL Audio TwK® DSP, or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. C6-650cw Component Woofer Features:• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels• Cast alloy frame with our Elevated Frame Cooling feature• Includes fine mesh grille Design Bandwidth:With 48 dB/octave filters: 55 Hz-6 kHzWith 24 dB/octave filters: 65 Hz-6 kHzWith 12 dB/octave filters: 80 Hz-6 kHz Component woofers are sold individually and include a plastic grille tray, one fine steel mesh grille and one electroformed JL Audio badge logo. General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 87.37 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 55 Hz - 6 KHz ± 3 dB Woofer Physical Specifications Frame Outer Diameter* (A) 6.50 in / 165 mm Grille Tray Outer Diameter** (B) 6.76 in / 172 mm Motor Outer Diameter (C) 3.54 in / 90 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion*** (E) 1 in / 25 mm Mounting Hole Diameter (F) 5.46 in / 139 mm Mounting Depth (G) 2.60 in / 66 mm *Does not take into account mounting tabs**Does not take into account logo badge***Frontal grille protrusion measured from mounting surface

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. The Focal 6.5KM 6-1/2" component woofers are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. This pair of Focal 6.5KM component woofers will handle the low-end detail and dynamics in your K2 Power M Series component system.     Powerful sound Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make these 6-1/2" woofers uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 120 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 6-1/2" component woofers (pair) "M"-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket neodymium magnet 4-ohm impedance handles up to 120 watts RMS (240 watts peak power) frequency response: 50-5,000 Hz sensitivity at 2.83V: 92.5 dB top-mount depth: 2-1/8" grille not included warranty: 1 year MFR # 6.5KM Item # 09165KM What's in the box: Two 6.5 KM Woofers Focal Performance owner's manual Eight 1-1/8" Screws Eight speed clips Quick start guide Features & specs General Speaker Size 6 1/2 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Aramid Fiber Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 93 Frequency Response 50 - 5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 120 Peak Power Handling (Watts) 240 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.45 Frame Width 6.494 Frame Length 6.494

GENERAL SPECIFICATIONS Continuous Power Handling (RMS): 300 WSystem Nominal Impedance: 4 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: No PHYSICAL SPECIFICATIONSExternal Width (W) 16.31 in / 414 mmExternal Height (H) 15.18 in / 386 mmExternal Depth (D1) 20.3 in / 516 mmExternal Top Surface Depth (D2) 15.75 in / 400 mmNet Weight 33.1 lb / 15 kg

JIMNY RE-STYLE | EXTERIOR Metio Premium Audio For Jimny 2018 > 3Dr Jimny 150W Peak Power 50W RMS 4Ω 5cm Roof Speaker with Gunmetal Grille 16.5cm Door Woofers High Quality Crossover Network Mounting Accessories

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs. The C2-525 system features 5.25-inch (130 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair.

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer deigns. The C2-600 system features 6-inch (150 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6-inch (150 mm) format is a direct fit in many Japanese vehicles where a full-size 6.5-inch speaker (165 mm) will not fit without modification. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6-inch (150 mm) speaker. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-525 system features 5.25-inch (130 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB