Your 2019-Current Ford Ranger T6 / Wildtrak / Raptor can look slick on the road while geared up for adventure with this Low-Profile Slimline II Roof Rack Kit. The Slimline II opens your truck to a whole world of Front Runner accessories to build that next trip. This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.  All Front Runner Racks are backed by a limited lifetime warranty* For further information on installation, please see the Fitment Guide in the Install tab. Drilling is required for installation. Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAFR006 - Ford RangerT6/Wildtrak/Raptor(12-Curr)Foot Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.87kg (63.65lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 250mm (10")Shipping Weight:Weight: 29.4kg (65lbs)

Keep your truck bed secure while still hauling your favorite adventure gear with this Ford Ranger Raptor w/Securi Lid Slimline II Load Bed Rack Kit that mounts easily onto the factory tracks. This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Ford Ranger Raptor w/Securi Lid contains a Slimline II Tray, Wind Deflector and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.77kg (65.63lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 250mm (10")Shipping Weight:Weight: 29.4kg (65lbs)

Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range. This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 29.53kg (65.1lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10") Shipping Weight:Weight: 30kg (66lbs)  

Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range. This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.4kg (64.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 34kg (75lbs)

Double up the cargo-hauling space on your Ford Ranger Single Cab SWB Pickup Truck with this robust load bed rack. This rack was designed especially for single cab pickup trucks and creates a full-size Slimline II rack that sits above your Ranger’s load bed. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to haul all manner of loads and customize your setup with over 55 accessories to suit your lifestyle, travel and adventure-sports needs. This kit creates a full-size rack that sits above your Ford Ranger Single Cab SWB Pickup Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1762mm), 2 Tracks, and 6 Pickup Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)1x TRAC010 - Universal Track Non Drilled / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33kg (72.75lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1830mm (72")Height: 280mm (11")Shipping Weight:Weight: 36kg (79lbs)

Free up your Ranger's load bed space by carrying your adventure gear, or toys, over the load bed with this Ford Ranger DC (2012-Current) Slimline II Leg Mount Load Bed Rack Kit. This kit creates a full-size rack that sits above your Ford Ranger DC (2012-Current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LASS034 - Ford Ranger Load Bin Mount Brackets1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 49.05kg (108.14lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1715mm (68")Height: 290mm (11")Shipping Weight:Weight: 48.2kg (106lbs)

It’s never been easier to start your adventure with the Ford Ranger T6 / Wildtrak / Raptor Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! This Slimsport Roof Rack is ready to play. Compatible with the Ford Ranger T6 SuperCrew (2012-2022), Ranger Wildtrak SuperCrew (2014-2022) and Ranger Raptor SuperCrew (2019-2022). Low-profile flat deck Slimsport rack has a load carrying area of 1272mm (50") x 1150mm (45.27"). Sleek side rails have integrated mounting feet. High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for all Front Runner side mount accessories (sold separately). Included standard full fairing with rubber edge trim makes the rack ultra-quiet. Need a lightbar? The optional Ford Ranger Slimsport Rack 40" Light Bar Wind Fairing Ford Ranger (2012-2022) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Light Bar FX1000-CB SM / 12V/24V / Single Mount (both sold separately). Fitment guide and all mounting hardware included. Note: Drilling required for fitment (all hardware included). NO DRILLING REQUIRED FOR WILDTRAK MODELS All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1 x KSFR002 - Ford Ranger T6/Wildtrak (12-2022)Ssport RR K1 x RRAC230 - Ford Ranger Slimsport Rack Wind Fairing1 x RRAC971 - Protection StripInstallation HardwareFitting InstructionsMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:1411mm (55.6") L x 1222mm (48.1") W x 147mm (5.8") HApproximate Installed Weight: 24.52kg (54.06lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 160mm (6")Shipping Weight:Weight: 24.52kg (54lbs)

Your adventure gear has a low-profile, durable new home on the Ford Ranger (2012-2022) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner. The kit comes ready to mount a light bar, so your journeys don’t have to stop at sunset. Our wide range of compatible accessories makes it easy to haul out to nature for your go-to activities. Compatible with the Ford Ranger T6 SuperCrew (2012-2022), Ranger Wildtrak SuperCrew (2014-2022) and Ranger Raptor SuperCrew (2019-2022). This low-profile flat deck Slimsport rack has a load-carrying area of 1272mm (50.07") x 1185mm (46.65") The sleek side rails have integrated mounting feet. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket {RRAC182~showName) for most Front Runner side mount accessories (sold separately). Included in the Ford Ranger (2012-2022) Slimsport is a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: Drilling required for installation. No drilling is required for Wildtrak models. Note: Under Rack Tables are not compatible with the Slimsport rack kit range. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KSFR002 - Ford Ranger T6/Wildtrak (12-2022)Ssport RR K1x RRAC191 - Ford Ranger Slimsport Rack 40" L Bar Wind Fairing1x RRAC971 - Protection StripMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.45kg (60.52lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 29kg (64lbs)

Gear up your Ford Ranger T6 4th Gen Extended Cab for any adventure with the Slimline II Roof Rack. This versatile, off-road tough roof rack is compatible with a wide range of accessories which allows you to customize it to suit your lifestyle, adventure sport, and travels. This particular roof rack kit features Low Profile Foot Rails to help minimize drag when carrying loads, which could make it more fuel-efficient. This 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen Extended Cab. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab. Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAFR009 - Ford Ranger T6 4Gen ExCab(2012-Curr)Foot Rails/Low1x RRSTD05 - SLII Tray - 1255mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 20.69kg (45.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 165mm (6")Shipping Weight:Weight: 21kg (46lbs)

Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6 Wildtrak Raptor with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available rack accessories can go on the Slimline II—no more excuses for leaving any gear behind. This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6 Wildtrak Raptor load bed. Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Ford Ranger T6 Wildtrak Raptor with specific mounting brackets. Drilling is required for fitment.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.Note: This Pro Bed Kit is not compatible with the Twin Wolf Pack Pro Cargo System Bracket Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBFR001S - Ford Ranger T6 Wildtrak Raptor (2012-2022) Pro Bed3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L) Material Used:Black epoxy powder - coated T6 aluminium Installed height from load bed ledge:640mm/ 25.19" Approximate Installed Weight: 79.3kg (174.83lbs) Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 785mm (31") Shipping Weight:Weight: 82kg (180lbs)

This kit creates a full-size rack that sits above your Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Ford Ranger T6.2 DOES NOT have a standard OEM Roll Top, Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline II Load Bed Rack Kit is available. Features KRFR024T - Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit Consisting of: 3x FASS016 - Flat Feet (pair) / 65mm 3x RRAC962 - Track Mount Stud Plate 1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.94kg (52.78lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Length = 1720mm Width = 1445mm Height = 250mm Shipping Weight: Weight = 29kg

This kit creates a full-size rack that sits above your Ford Ranger Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm), 2 Load Bed Mounts, and 6 Pickup Legs that fit into the Load Bed Mounts. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Ford Ranger T6.2 comes standard with the OEM Roll Top, Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit is available. Features KRFR025T - Ford Ranger T6.2 (2022-Curr)SLII Load Bed Rack Kit Consisting of: 3x LASS026 - Universal Load Bed Leg / Tall (Pair) 1x LASS046 - Ford Rngr T6.2 (22-Curr) Ld bd rck mount system 1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 33.7kg (74.3lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 295mm (12") Shipping Weight: Weight: 39kg (86lbs)

Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6.2 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind. This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor load bed. Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Ford Ranger T6.2 Wildtrak/Raptor with specific mounting brackets bolted to the existing factory mounting points.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features PBFR002T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed Rack Kit Consisting of: 3x FASS025 - Foot Set / 70mm - 80mm 1x PBFR002S - Ford Ranger T6.2 Next Gen (2023-Current) Pro Bed S 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 70.63kg (155.71lbs) Shipping Dimensions: Width: 460mm (18") Length: 1720mm (68") Height: 640mm (25") Shipping Weight: Weight: 83kg (183lbs)

Unleash your Ford Ranger T6.2 Wildtrak/Raptor's full cargo and gear transporter potential with the sleek, low profile yet ultra-tough Slimline II Roof Rack. Whether it's mountain biking that pumps your adrenaline or overlanding that quenches your thirst for exploration, our wide range of accessories has you covered. Adventure awaits! This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a limited lifetime warranty* For further information on installation, please see the Fitment Guide in the Install tab. Drilling required for installation. No drilling is required for Wildtrak models. Note: Under-rack accessories and some side-mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Consisting of: 1x FAFR012 - Ford Rngr T6.2(22-Cur)VW Amark (23-Cur)Low Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

Transform your Ford Ranger T6.2 Wildtrak/Raptor Double Cab into the ultimate gear carrier with the extremely quiet Slimsport Roof Rack. The high-strength aluminium slats have T-slots, which makes them suitable for the wide range of top-mount Front Runner accessories. This low-profile flat deck Slimsport rack has a load-carrying area of 1272mm (50") L x 1166mm (45.9") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Drilling required. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSFR009T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit Consisting of: 1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray 1x RRAC313 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt WF Material Used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Dimensions: 1448mm (57") L x 1233mm (48.5") W x 147mm (5.8") Approximate Installed Weight: 21.95kg (48.39lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 330mm (13") Length: 1700mm (67") Height: 225mm (9") Shipping Weight: Weight: 26kg (57lbs)

Transform your Ford Ranger T6.2 Wildtrak/Raptor Double Cab into an absolute beast of a gear carrier with the low-profile Slimsport Roof Rack. This included Wind Fairing has been designed to host a slim 40" Light Bar and move air up, over the rack and cargo, thus reducing wind noise. This low-profile flat deck Slimsport rack has a load carrying area of 1272mm (50") L x 1166mm (45.9") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately). The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet. Included is the Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing with a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Drilling required. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSFR008T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of: 1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray 1x RRAC312 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt 40" Lbar WF Material Used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Dimensions: 1448mm (57") L x 1233mm (48.5") W x 147mm (5.8") Approximate Installed Weight: 21.23kg (46.8lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 330mm (13") Length: 1700mm (67") Height: 225mm (9") Shipping Weight: Weight: 26kg (57lbs)

This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation. All Front Runner Racks are backed by a limited lifetime warranty* Features KRFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit Consisting of: 1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.221kg (66.63lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 300mm (12") Shipping Weight: Weight: 7.22kg (16lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRFR007T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFR003 - Ford Ranger T6/Wildtrak (2012-2019) Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.91kg (63.74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 260mm (10") Shipping Weight: Weight: 30kg (66lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Features KRFR008T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 1x FAFR004 - Ford Ranger (2012-2019) Foot Rails / Low Profil 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.87kg (63.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 260mm (10") Shipping Weight: Weight: 30kg (66lbs)

This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. An opening on the Foot Rails allows access to Front Runner Under Rack Mount Tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a limited lifetime warranty* For further information on installation, please see the Fitment Guide in the Install tab. Drilling is required for installation. Features KRFR012T - Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAFR005 - Ford RangerT6/Wildtrak/Raptor(2012-2022)Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.91kg (63.74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 250mm (10") Shipping Weight: Weight: 29kg (64lbs)