
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 100 SERIES SLIMSPORT ROOF RACK KIT -KSTL002T
$1,484.00
$1,649.00
This low-profile flat deck Slimsport Tray has a load-carrying area of 2280mm (89.8") x 1289mm (50.7").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for all Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (both sold separately).
Fitment guide and all mounting hardware included.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Fits to existing factory holes with factory rails removed.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTL002T - Toyota Land Cruiser 100 Slimsport Roof Rack Kit
Consisting of:
1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray
1x RRAC281 - Toyota Lnd Crusr 100 series Slmsprt Wind Fairing
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37.43kg (82.52lbs)
Assembled Rack Kit Dimensions:
2280mm (89.8") L x 1289mm (50.7") W x 150mm (5.9") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 40kg (88lbs)

Front Runner
FRONT RUNNER ISUZU D-MAX (2020-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY -KSID002T
$975.00
$1,083.00
Get your Isuzu D-Max ready for all adventure types and gear-carrying assignments with this low-profile Slimsport Roof Rack Kit/Lightbar Ready. Now, you can mount various accessories onto the rack's super-strong slats via the T-slots.
This low-profile flat deck Slimsport rack has a load carrying area of 1410mm (55.5") x 1141mm (44.9").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Isuzu D-Max (2020-Current) Slimsport Rack is the Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Note: Only compatible with rear factory antenna or when no front antenna is fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSID002T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray
1x RRAC309 - Isuzu D-Max (20-current) Lightbar Windfairing
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 18.75kg (41.34lbs)
Assembled Rack Kit Dimensions:
1410mm (55.5") L x 1140mm (44.9") W x 125mm (4.9") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 24kg (53lbs)

Rhino-Rack
RHINO-RACK VORTEX COMPLETE ROOF RACK BUNDLE FOR BYD SHARK 6
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia

Front Runner
FRONT RUNNER TOYOTA TUNDRA (3RD GEN) 4 DOOR CREWMAX 5.5' (2022-CURRENT) PRO BED RACK KIT...
$2,854.00
$3,171.00
Up your Toyota Tundra’s gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack—no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5 load bed.
Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headboard Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5 with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBTT002S - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 79kg (174.16lbs)Shipping Dimensions:Width: 645mm (25")Length: 1720mm (68")Height: 500mm (20")Shipping Weight:Weight: 85kg (187lbs)

Front Runner
FRONT RUNNER FORD F-150 6.5' BED (2009-CURRENT) PRO BED RACK KIT PBFF004T
$3,236.00
$3,595.00
Turn your Ford-150 into the ultimate gear carrier with the Pro Bed Rack System and a Slimline II Rack. Now you can enjoy easy side access to all the Pro Bed Pro Bed Rack-specific accessories, such as the Molle Panel and Recovery Device Mount, while taking advantage of the extra free space in the load bed. Customize your Slimline II Rack for any adventure thanks to the 55 plus available rack accessories.
This Pro Bed Rack Kit is specifically designed to fit the Ford F-150 6.5' load bed.
Included in this Kit is the a 1425mm/56.1" x 1964mm/77.32" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket,Pro Bed Rack Headboard Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford F-150 6.5' with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please
PBFF004T - Ford F-150 6.5' Bed (2009-Current) Pro Bed Rack Kit
Consisting of:4x FASS025 - Foot Set / 70mm - 80mm1x PBFF004S - Ford F-150 6.5" Bed (2009-Current) Pro Bed System1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumInstalled height from load bed ledge:640mm/ 25.19"
Approximate Installed Weight: 83kg (182.98lbs)
Shipping Dimensions:Width: 640mm (25")Length: 1820mm (72")Height: 490mm (19")
Shipping Weight:Weight: 83kg (183lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN AMAROK (2023-CURRENT) SLIMSPORT ROOF RACK KIT/LIGHTBAR READY KSVA002T
$975.00
$1,083.00
Improve your Amarok’s camping-, sports- and adventure-gear load capacity with a roof rack. The lightweight, low-profile Slimsport Roof Rack kit designed for the roofline of your cab and has a special cutout, so you can easily mount the 40” LED Slim Light Bar for expeditions at all hours.
This low-profile flat deck Slimsport rack has a load carrying area of 1468mm (57.8") x 1233mm (48.5").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included in the Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit/Lightbar Ready has a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Note: Only compatible with rear factory antenna or when no front antenna is fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KSVA002T - Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit/Lightbar ReadyConsisting of:1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray1x RRAC312 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt 40" Lbar WFMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 21.3kg (46.96lbs)Assembled Tray Dimensions:1468mm (57.8") L x 1233mm (48.5") W x 139mm (5.5") HThe t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 25kg (55lbs)

Front Runner
FRONT RUNNER TOYOTA RAV4 (2019-CURRENT) SLIMSPORT ROOF RACK KIT KSTR003T
$1,300.00
$1,444.00
Gear up your Toyota Rav4 (2019-Current) for any adventure with the Slimsport Roof Rack Kit. The Slimsport was designed for activity-focused drivers that do not require an expedition-grade build. It has a low-profile and is compatible with over 55 Front Runner accessories.
This low-profile flat deck Slimsport rack has a load-carrying area of 1676mm (66") x 1175mm (46.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Rav4 (2019-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Additional drilling is required for the RAV4 LE models.Note: The panoramic glass roof is not operational when this Rack Kit is installed. For panoramic glass roof the Toyota Rav4 (2019-Current) Slimline II Roof Rack Kit is suited, or Toyota Rav4 Adventure / TRD-Offroad (2019-Current) Slimline II Roof Rack Kit for adventure model.
KSTR003T - Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit- by Front Runner
Consisting of:1 x Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit1 x RRAC238 - Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing1 x RRAC971 - Protection stripInstallation HardwareFitting Instructions
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Dimensions: 1676mm (66") L x 1175mm (46.3") W x 135mm (5.3") H
Approximate Installed Weight: 34.74kg (76.59lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1705mm (67")Height: 220mm (9")
Shipping Weight:Weight: 35kg (77lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER PRADO 250 (2024-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY...
$1,564.00
$1,738.00
Turn your ordinary Toyota Land Cruiser Prado 250 into an extraordinary cargo carrier with the low-profile and lightbar-ready Slimsport Roof Rack. Prado owners will love how this durable, user-friendly rack can be customized to carry camping, sports, work, or any other gear. The multi-functional Slimsport Roof Rack will effortlessly do the job in the city and on the toughest trails your Toyota can find. This rack is super quiet thanks to the included 40” Lightbar Wind Fairing.
This low-profile flat deck Slimsport rack has a load carrying area of 2210mm (87") L x 1200mm (47.2") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included in the Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing allows the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
KSTL005T - Toyota Land Cruiser Prado 250 (2024-Current) Slimsport Roof Rack Kit / Lightbar ReadyConsisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC341 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 38.06kg (83.91lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 320mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 41kg (90lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER PRADO 250 (2024-CURRENT) SLIMSPORT ROOF RACK KIT KSTL004T
$1,738.00
Turn your ordinary Toyota Land Cruiser Prado into an extraordinary cargo carrier with the low-profile and lightweight Slimsport Roof Rack. This durable, user-friendly roof rack can be customized to carry camping, sports, work, or any other gear. The multi-functional Slimsport Roof Rack will effortlessly do its job in the city and on the toughest trails your Toyota can find.
This low-profile flat deck Slimsport rack has a load-carrying area of 2210mm (87") L x 1200mm (47.2") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.\
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182) for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
KSTL004T - Toyota Land Cruiser Prado 250 (2024-Current) Slimsport Roof Rack KitConsisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC340 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 38.78kg (85.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 320mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 42kg (92lbs)

Front Runner
Front Runner Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit / Lightbar ready
$1,445.00
$1,606.00
KSTF002T - Toyota 4Runner 5th Gen (2010-Current) Slimsport Roof Rack Kit / Light Bar Ready - by Front Runner
This low-profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") x 1181mm (46.5").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included in the Toyota 4Runner (2010-2024) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:1x KSTF001 - Toyota 4Runner (2010-2024) SlimSport Roof Rack Kit1x RRAC195 - Toyota4Runner Slimsport Rack 40" LBar Wind FairingMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.95kg (88.07lbs)Assembled Rack Kit Dimensions:2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") HThe t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 41kg (90lbs)
This product is compatible with the following vehicles:
Toyota4Runner5th Gen N280 2010-2024

Front Runner
FRONT RUNNER SUBARU XV CROSSTREK 2ND GEN (GT) (2017-2023) SLIMSPORT ROOF RACK KIT KSSX003T
$1,105.00
$1,228.00
It’s never been easier to start your adventure with the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! The Slimsport Roof Rack is ready to play.
Fits to existing factory holes with factory rails removed.
Low-profile flat deck Slimsport rack has a load carrying area of 1474mm (58") x 1146mm (45.11").
Sleek side rails have integrated mounting feet with additional brace brackets for added strength.
High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for all Front Runner side mount accessories (sold separately).
Included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (both sold separately).
Fitment guide and all mounting hardware included.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KSSX003T - Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack KitConsisting of:1 x Subaru XV Crosstrek (2017-2023) Slimsport Roof Rack Kit1 x RRAC235 - SUBARU XV CROS SLIMSPOT RACK WIND FAIRINGInstallation HardwareFitting InstructionsMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:1645mm (64.8") L x 1146mm (45.1") W x 169mm (6.7") HApproximate Installed Weight: 31.25kg (68.89lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 332mm (13")Length: 1696mm (67")Height: 171mm (7")Shipping Weight:Weight: 31.25kg (69lbs)

Front Runner
FRONT RUNNER SUBARU XV CROSSTREK 2ND GEN (GT) (2017-2023) SLIMSPORT ROOF RACK KIT / LIGHTBAR...
$1,105.00
$1,228.00
The Subaru XV Crosstrek 2nd Gen (2018-2023) Slimsport Roof Rack Kit is the key to your most fun adventures yet. It comes light bar ready, so you can keep the journey going into the after-hours. This durable, low-profile rack lets you immediately haul out to the Great Outdoors with a wide variety of compatible Front Runner accessories.
Fits to existing factory holes with factory rails removed.
This low-profile flat deck Slimsport rack has a load carrying area of 1474mm (58") x 1146mm (45.11").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included in the Subaru XV Crosstrek (2017-2023) Slimsport is a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Under Rack Tables are not compatible with Slimsport rack kits
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KSSX002T - Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit / Lightbar readyConsisting of:1x KSSX001 - Subaru XV Crosstrek (2017-2023)Ssport RR K1x RRAC211 - Subaru XV Cros Slimspot Rack 40" LBar Wind FairingMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.15kg (75.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 230mm (9")Shipping Weight:Weight: 35kg (77lbs)

Front Runner
FRONT RUNNER SUBARU OUTBACK GEN 6 (2020-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY KSSO005T
$1,481.00
$1,645.00
Transform your Subaru Outback GEN 6 into an extraordinary gear carrier with the low-profile and Lightbar-ready Slimsport Roof Rack. This durable, user-friendly rack can be adapted to carry sports, adventure or any other gear. Don’t be afraid of using your Subaru in the dark as this rack already has a cutout for a 40” lightbar.
This low-profile flat deck Slimsport rack has a load carrying area of 1999mm (78.7") x 1151mm (45.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.\
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included is the Subaru Outback GEN 6 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing has a cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Sunroof fully operational in slide open and closed mode.
Note: Sunroof not operational in vent / tilt mode.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER SUBARU OUTBACK GEN 6 (2020-CURRENT) SLIMSPORT ROOF RACK KIT KSSO004T
$1,481.00
$1,645.00
Transform your Subaru Outback GEN 6 into an extraordinary gear carrier with the low-profile and lightweight Slimsport Roof Rack. This durable, user-friendly rack can be adapted to carry camping, sports, work, or any other gear. The multi-functional Slimsport Roof Rack will effortlessly do the job in the city and when off-road.
This low-profile flat deck Slimsport rack has a load-carrying area of 1999mm (78.7") x 1151mm (45.3").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport Side Mount Accessory Bracket / Small (sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
The fitment guide and all mounting hardware are included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Sunroof fully operational in slide open and closed mode.
Note: Sunroof not operational in vent / tilt mode.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER SUBARU CROSSTREK 3RD GEN (GU)(2023-CURRENT) SLIMSPORT ROOF RACK KIT LIGHTBAR READY KSSC003T
$1,316.00
$1,462.00
Get ready for endless adventures when you fit the low-profile Slimsport Roof Rack to your Subaru Crosstrek. You can easily fit any Front Runner top mount accessories to the high-strength aluminium slats. Your Subaru is now ready for any gear needed for your adventures.
Fits to existing factory holes with factory rails removed.
This low-profile flat deck Slimsport rack has a load carrying area of 1633mm (64.3") x 1146mm (45.11").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included is the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
KSSC003T - Subaru Crosstrek(2023-Curr)Ssport RRack LightReady
Consisting of:1x KSSC001 - Subaru Crosstrek (2023-Current) Slimsport Tray1x RRAC211 - Subaru XV Cros Slimspot Rack 40" LBar Wind Fairing
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:1633mm (64.3") L x 1146mm (45.12") W x 137mm (5.4") H
Approximate Installed Weight: 25.22kg (55.6lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 225mm (9")Length: 1700mm (67")Height: 235mm (9")
Shipping Weight:Weight: 28kg (62lbs)

Front Runner
FRONT RUNNER SUBARU CROSSTREK 3RD GEN (GU) (2023-CURRENT) SLIMSPORT ROOF RACK KIT KSSC002T
$1,316.00
$1,462.00
Get ready for awesome gear-carrying adventures when you fit this low-profile Slimsport Roof Rack to your Subaru Crosstrek. This tough rack has a large load-carrying area, and thanks to its high-strength aluminum slats, you can fit all Front Runner top mount accessories onto it.
Fits to existing factory holes with factory rails removed.
This low-profile flat deck Slimsport rack has a load carrying area of 1640mm (64.6") x 1146mm (45.11").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.

Front Runner
FRONT RUNNER MAZDA BT50 (2020-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY
$975.00
$1,083.00
Customized your Mazda BT50 for weekend getaways and sporty adventures with this sleek, lightbar ready, Slimsport Roof Rack Kit. The wind fairing features a 40" cut out to allow the use of the Front Runner 40” LED Slim Light Bar, so your adventures can continue well into the night. This rack kit has over 55 compatible accessories to suit your camping or sporting gear needs.
This low-profile flat deck Slimsport rack has a load carrying area of 1384mm (54.5") x 1141mm (44.9").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included in the Mazda BT50 (2020-Current) Slimsport Rack is the Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling maybe required for some models.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER MAZDA BT50 (2020-CURRENT) SLIMSPORT ROOF RACK KIT KSMB001T
$975.00
$1,083.00
Get set for customized weekend getaways and sporty adventures with the Mazda BT50 Slimsport Roof Rack Kit. Attach your rack accessories using the T-slots found in the slats. The included wind fairing on this sleek rack ensures rack noise is minimal.
This low profile flat deck Slimsport rack has a load-carrying area of 1413mm (55.6") L x 1141mm (44.9").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Fitment guide and all mounting hardware included.
Note: Drilling maybe required for some models.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER LEXUS GX 550 (2024-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY KSLE003T
$1,564.00
$1,738.00
This lightbar-ready Slimsport Roof Rack Kit offers a sleek storage solution for the Lexus GX 550. It’s perfect for nighttime adventures, thanks to the 40’ cutout for a light bar. The T-slots on the rack’s strong slats can easily accommodate sports and camping gear accessories.
This low-profile flat deck Slimsport rack has a load carrying area of 2210mm (87") L x 1200mm (47.2") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included in the Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing allows the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
KSLE003T - Lexus GX 550 (2024-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC341 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 40kg (88lbs)

Front Runner
FRONT RUNNER LEXUS GX 550 (2024-CURRENT) SLIMSPORT ROOF RACK KIT KSLE002T
$1,564.00
$1,738.00
The Slimsport Roof Rack Kit offers a sleek storage solution for the Lexus GX 550. Safely carry all your sports and camping gear, so you can get kitted for any adventure. Includes noise-reducing, aerodynamic wind fairing.
This low-profile flat deck Slimsport rack has a load-carrying area of 2210mm (87") L x 1200mm (47.2") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
KSLE002T - Lexus GX 550 (2024-Current) Slimsport Roof Rack KitConsisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC340 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 225mm (9")Shipping Weight:Weight: 40kg (88lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN T5/T6 (2003-CURRENT) W/SCA POP TOP ROOF SLIMLINE II ROOF RACK KIT KRVK008T
$1,393.00
$1,548.00
Use all of the valuable cargo carrying space you can with the Volkswagen T5/T6 (SWB or LWB) w/SCA Pop Top Slimline II Roof Rack Kit. Mount 55+ accessories on what was once wasted roof space so you can adventure longer and explore more.
This 1358mm/ 53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T5/T6 (2003-Current) w/SCA Pop Top Roof contains Slimline II Tray, Wind Deflector and 6 mounting Feet. This system installs easily with off-road tough feet that grip onto the existing factory/OEM SCA Pop Top rails. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Please adhere to the load rating of your SCA Pop Top Roof.
KRVK008T - Volkswagen T5/T6 (2003-Current) w/SCA Pop Top Roof Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner3 x RRAC907 - Stud Plate MB Sprinter Track1 x RRSTG07 - Slimline II Tray - 1345mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24.8kg (54.7lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Height: 150mm (5.9")Length: 1730mm (68.1")Width: 440mm (17.3")
Shipping Weight:
Weight 25.4Kg (56lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN T5 TRANSPORTER SWB (2003-2015) SLIMLINE II 1/2 ROOF RACK KIT KRVK005T
$1,559.00
$1,732.00
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Volkswagen T5 Transporter. It easily installs using the existing factory mounting points. No drilling required.
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Volkswagen T5 Transporter. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRVK005T - Volkswagen T5 Transporter SWB (2003-2015) Slimline II 1/2 Roof Rack Kit - by Front RunnerConsisting of:1x FAVT001 - Volkswagen T5 Caravelle/Transporter Foot Rails1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.75kg (76.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 620mm (24")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 32.55kg (72lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN ID BUZZ SWB SLIMLINE II ROOF RACK KIT KRVI001T
$1,775.00
$1,972.00
Prepare your Volkswagen ID Buzz SWB for any adventure with the Slimline II Roof Rack. This highly versatile roof rack is designed to fit perfectly on your Buzz and boasts a unique modular design that allows you to customize it with a wide range of accessories to suit your travel and adventure-sports lifestyle.
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your Volkswagen ID Buzz SWB. It easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRVI001T - Volkswagen ID Buzz SWB Slimline II Roof Rack KitConsisting of:1x FAVI001 - Volkswagen ID Buzz Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.96kg (68.26lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")Shipping Weight:Weight: 37kg (81lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CADDY MAXI LWB (2020-CURRENT) SLIMLINE II ROOF RACK KIT KRVC016T
$1,953.00
$2,170.00
This 1964mm/77.3" long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your Volkswagen Caddy Maxi.
Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty.*
KRVC016T - Volkswagen Caddy Maxi LWB (2022-Current) Slimline II RoofConsisting of:1x FAVC004 - Volkswagen Caddy (2020 - Current) LWB Foot Rail1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 40kg (88.18lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 265mm (10")Shipping Weight:Weight: 40kg (88lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CADDY (2022-CURRENT) SLIMLINE II ROOF RACK KIT KRVC011T
$1,670.00
$1,855.00
This 1560mm/64.1" long full-size Slimline II cargo carrying roof rack kit for the Volkswagen Caddy contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
KRVC011T - Volkswagen Caddy (2022-Current) Slimline II Roof Rack Kit - by Front RunnerConsisting of:3x FASS025 - Foot Set / 70mm - 80mm1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)1x TRMP004 - Mitsubishi Pajero Sport Tracks / 1900mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.03kg (66.2lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1965mm (77")Height: 275mm (11")Shipping Weight:Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CALIFORNIA T6.1 SLIMLINE II ROOF RACK KIT KRVC010T
$1,863.00
$2,070.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen California T6.1 contains a Slimline II Tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Due to the weight of the roof rack after fitting, the function of the pop-up roof can only be used to a limited extent.
KRVC010T - Volkswagen California T6.1 Slimline II Roof Rack Kit - by Front RunnerConsisting of:4x FASS024 - Foot Set / 50mm - 60mm1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 32.46kg (71.56lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1715mm (68")Height: 155mm (6")Shipping Weight:Weight: 31.4kg (69lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CRAFTER/MAN TGE W/O OEM TRACKS (2017-CURRENT) SLIMLINE II ROOF RACK KIT KRVC009T
$3,129.00
$3,477.00
Add even more versatility to your Volkswagen Crafter/MAN TGE w/o OEM Tracks (2017-Current) and explore more with this Slimline II Roof Rack Kit. Haul your adventure gear and toys to those secret camping spots and still have interior room for more cargo and passengers.
This 2772mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the VW Crafter/MAN TGE contains the Slimline II Tray, Wind Deflector, 2 Tracks and 8 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
KRVC009T - VW Crafter/MAN TGE w/oOEM Tracks(17-Current) Slimline II Roof Rack KitConsisting of:3x FASS024 - Foot Set / 50mm - 60mm1x FASS028 - Foot Set / 85mm-95mm1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)1x TRMS001 - Mercedes-Benz Sprinter (2006-Curr) Tracks/3082-4098mmL1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 52.39kg (115.5lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1800mm (71")Height: 270mm (11")Shipping Weight:Weight: 52.6kg (116lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CRAFTER/MAN TGE W/OEM TRACKS (2017-CURRENT) SLIMLINE II ROOF RACK KIT KRVC008T
$2,612.00
$2,902.00
Add even more versatility to your Volkswagen Crafter/MAN TGE w/OEM Tracks (2017-Current) and explore more with this Slimline II Roof Rack Kit. Haul your adventure gear and toys to those secret camping spots and still have interior room for more cargo and passengers.
This 2772mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the VW Crafter/MAN TGE contains a Slimline II tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRVC008T - Volkswagen Crafter/MAN TGE w/OEM Tracks (2017-Current) Slimline II Roof Rack Kit - by Front RunnerConsisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC907 - Stud Plate MB Sprinter Track1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44.48kg (98.06lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1715mm (68")Height: 230mm (9")Shipping Weight:Weight: 45.6kg (100lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CRAFTER SLIMLINE II ROOF RACK KIT/TALL KRVC004T
$2,536.00
$2,818.00
This 2772mm/ 109" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen Crafter w/OEM Tracks contains Slimline II Tray, Wind Deflector and 8 mounting Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRVC004T - Volkswagen Crafter Slimline II Roof Rack Kit/Tall
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 39kg (85lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 45.0kg (99.0lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN CRAFTER W/O OEM TRACKS SLIMLINE II ROOF RACK KIT KRVC003T
$3,128.00
$3,475.00
This 2772mm/ 109" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen Crafter w/o OEM Tracks contains Slimline II Tray, Wind Deflector, 2 Tracks and 8 mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRVC003T - Volkswagen Crafter w/o OEM Tracks Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner1 x TRMS001 - Mercedes-Benz Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 45kg (100lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 52.7kg (116.0lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN AMAROK (2023-CURRENT) SLIMLINE II ROOF RACK KIT/LOW PROFILE KRVA008T
$1,463.00
$1,625.00
This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the Fitment Guide in the Install tab.
Drilling is required.
Note: Under-rack accessories and some side-mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
For further information on installation, please see the fitment instructions in the INSTALL tab.
KRVA008T - Volkswagen Amarok (2023-Current) Slimline II Roof Rack Kit/Low ProfileConsisting of:1x FAFR012 - Ford Rngr T6.2(22-Cur)VW Amark (23-Cur)Low Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.39kg (53.77lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 300mm (12")Shipping Weight:Weight: 30.27kg (67lbs)

Front Runner
FRONT RUNNER VOLKSWAGEN AMAROK (2023-CURRENT) SLIMLINE II ROOF RACK KRVA007T
$1,466.00
$1,629.00
This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
Drilling is required.
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 5 (2005-CURRENT) SLIMLINE II LOAD BED RACK KIT KRTT961T
$1,696.00
$1,885.00
This kit creates a full-size rack that sits above your Toyota Tacoma’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
KRTT961T - Toyota Tacoma ReTrax XR 5" (2005-Current) Slimline II Load Bed Rack KitConsisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.54kg (56.31lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1730mm (68")Length: 440mm (17")Height: 240mm (9")Shipping Weight:Weight: 30kg (66lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA CREWMAX 6.5' (2007-CURRENT) SLIMLINE II LOAD BED RACK KIT KRTT960T
$2,156.00
$2,396.00
This kit creates a full-size rack that sits above your Toyota Tundra Crewmax truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
KRTT960T - Toyota Tundra Crewmax 6.5' (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner2 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 36.3kg (79.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18.0")Length: 1730mm (68.0")Height: 290mm (11.0")
Shipping Weight:36.6kg (81.0lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA CREWMAX 5.5' (2007-CURRENT) SLIMLINE II LOAD BED RACK KIT KRTT959T
$1,830.00
$2,033.00
This kit creates a full-size rack that sits above your Toyota Tundra Crewmax truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1358mm) and 6 Pickup Truck Bed Universal Legs.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTT959T - Toyota Tundra Crewmax 5.5' (2007-Current) Slimline II Load Bed Rack Kit - by Front RunnerConsisting of:3x LASS026 - Universal Load Bed Leg / Tall (Pair)2x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.51kg (67.26lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 290mm (11")Shipping Weight:Weight: 33.6kg (74lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA DC 4-DOOR UTE (2007-CURRENT) SLIMLINE II LOAD BED RACK KIT KRTT956T
$1,679.00
$1,865.00
This kit creates a full size rack that sits above your Toyota Tundra DC 4-Door's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
KRTT956T - Toyota Tundra DC 4-Door Pickup Truck (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA CREW MAX UTE (2007-CURRENT) SLIMLINE II LOAD BED RACK KIT KRTT950T
$1,553.00
$1,725.00
This kit creates a full size rack that sits above your Toyota Tundra’s (2007 + w/OEM bed rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm/58.1" (W) x 1358mm/53.5" (L)) and 4 Pickup Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Due to load limitations of the factory bed tracks, we do NOT advise loading more than 150 lbs (68 kg). While Front Runner racks and mounting systems have been engineered and built to hold 660 lbs/299kgs, this may exceed your vehicle manufacturers’ recommendations. Until all vehicle components are made as off-road tough as Front Runner’s, we suggest contacting your vehicle maker to check load limits before aggressive loading of the rack.For further information on installation, please see the fitment instructions in the INSTALL tab.
KRTT950T - Toyota Tundra Pick-Up Truck (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.2lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA DOUBLE CAB (2024-CURRENT) SLIMLINE II ROOF RACK KIT KRTT013T
$1,428.00
$1,587.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tacoma Double Cab. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount table (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTT013T - Toyota Tacoma Double Cab (2024-Current) Slimline II Roof Rack KitConsisting of:1x FATT013 - Toyota Tacoma Double Cab (2024-Current) Foot Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 23.74kg (52.34lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA (3RD GEN) CAB OVER CAMPER SLIMLINE II ROOF RACK KIT KRTT012T
$1,008.00
$1,120.00
This 752mm/29.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tundra when equipped with a Cab Over Camper. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
KRTT012T - Toyota Tundra (3rd Gen) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:1x FATT012 - Toyota Tundra Double Cab 2nd/3rd Gen (2007-Current) Short Foot Rails / Low Profile 1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 16.79kg (37.02lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 275mm (11")
Shipping Weight:Weight: 22kg (48lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA DOUBLE CAB (2007-2021) SLIMLINE II ROOF RACK KIT / LOW PROFILE...
$1,234.00
$1,371.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Tundra Double Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
KRTT010T - Toyota Tundra DC (2007-2021) Slimline II Roof Rack Kit / Low Profile - by Front RunnerConsisting of:1x FATT006 - Toyota Tundra Double Cab (2007-2021) Foot Rail / Low Profile1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28kg (61.7lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 250mm (10")Shipping Weight:Weight: 30kg (66lbs)

Front Runner
FRONT RUNNER TOYOTA SEQUOIA (2022-CURRENT) SLIMLINE II ROOF RACK KIT KRTS002T
$2,552.00
$2,835.00
This 2570mm/101.2" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Sequoia. Easily installs using the existing factory mounting points. No drilling or modification required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER TOYOTA SEQUOIA (2008-2022) SLIMLINE II ROOF RACK KIT KRTS001T
$2,304.00
$2,560.00
This 2166mm/85.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Sequoia. Easily installs using the existing factory mounting points. No drilling or modification required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER TOYOTA RAV4 (2019-CURRENT) SLIMLINE II ROOF RACK KIT KRTR004T
$1,322.00
$1,469.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Rav4 2019+. Easily installs using the existing mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: The factory glass sun roof is only operational with vent mode and can not be fully retracted to open with this Rack Kit fitted. This Rack Kit is not suitable for Rav4 Adventure, TRD or LE models.
KRTR004T - Toyota Rav4 (2019-Curr) SLII Roof Rack Kit
Consisting of:
1 x FATR001 - Toyota Rav4 (2019-Current) Foot Rails - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24.9kg (54.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1610mm (63")Height 260mm (10")
Shipping Weight:
Weight 24.9kg (54.8lbs)

Front Runner
FRONT RUNNER TOYOTA UTE (1988-1994) SLIMLINE II LOAD BED RACK KIT KRTP016T
$1,650.00
$1,833.00
This kit creates a full size rack that sits above your Toyota's (1988-1994) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm/49.5" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks Drilling may be required for installation..
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
KRTP016T - Toyota Pickup Truck (1988-1994) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.1lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 150 SLIMLINE II ROOF RACK KIT KRTP015T
$2,002.00
$2,225.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Toyota Prado 150. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTP015T - Toyota Prado 150 SLII Roof Rack Kit - by Front RunnerConsisting of:1x FATP003 - Toyota Prado 150 Foot Rails1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.61kg (87.32lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 39kg (86lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 90 SLIMLINE II ROOF RACK KIT KRTP001L
$1,836.00
$2,040.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for Toyota Prado 90 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTP001L - Toyota Prado 90 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner1 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner1 x RRSTG09 - Slimline II Tray - 1345mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 29kg (64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 33.8kg (74.4lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 78 SLIMLINE II ROOF RACK KIT / TALL KRTLT25L
$2,895.00
$3,217.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for your Toyota Land Cruiser 78 contains Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty
KRTLT25L - Toyota Land Cruiser 78 Slimline II Roof Rack Kit / Tall - by Front RunnerConsisting of:1x LASD110 - No 10 Leg Diagonal 280mm (Pair)4x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 52.64kg (116.05lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 52.23kg (115lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 80 SLIMLINE II ROOF RACK KIT / TALL KRTLT20L
$2,115.00
$2,350.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for all 80 series Toyota Land Cruisers contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
2 x LASS027 - Leg Spacer 6mm (Pair) - by Front Runner4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 33kg (72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")Shipping Weight:
Weight 38.2kg (84.0lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 80 SLIMLINE II 1/2 ROOF RACK KIT / TALL KRTLT19L
$1,440.00
$1,600.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for all 80 series Toyota Land Cruisers contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTLT19L - Toyota Land Cruiser 80 Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTG07 - Slimline II Tray - 1345mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 27.4kg (60.2lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER PRADO 250 (2024-CURRENT) SLIMLINE II ROOF RACK KIT KRTL047T
$2,194.00
$2,438.00
This 2166mm/85.3” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser Prado. No drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails allow for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allows the fitment of a Table that mounts under the rear of the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
KRTL047T - Toyota Land Cruiser Prado 250 (2024-Current) Slimline II Roof Rack KitConsisting of:1x FATL006 - Toyota Land Cruiser Prado (2024) Foot Rail1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.45kg (82.56lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 47kg (103lbs)