HERTZ Marine 6.5" (165Mm) 100W 2-Way Total-White Coaxial Speaker -...
$329.99
HEX 6.5 M marine coaxial, available with both total-white (TW) and total-black grilles (TC), provides the perfect style for your boat, giving you years of pure fun while cruising, being over-engineered, and tested for Marine applications.
The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" (165Mm) 100W 2-Way Total-Charcoal Coaxial Speaker -...
$329.99
HEX 6.5 M marine coaxial, available with both total-white (TW) and total-black grilles (TC), provides the perfect style for your boat, giving you years of pure fun while cruising, being over-engineered, and tested for Marine applications.
The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" 2-Way Black Coaxial Speaker - Pair (Hex...
$325.00
The HEX 6.5 M-C-O combines timeless marine design with the rugged performance expected from Hertz Marine. Featuring a Marine Total Black grille, this speaker adds a sleek, modern touch to any vessel while ensuring long-lasting protection in the harshest marine environments. Engineered and tested for real marine duty, the HEX 6.5 M-C-O delivers detailed, dynamic sound in a compact format, only 2.36 inches deep, making every voyage more enjoyable. Certified with the Hertz Pure Marine stamp, it meets IP65, ASTM-D4329 UV, and ASTM-B117 salt fog standards for maximum durability and performance. Its high-efficiency tweeter, optimized through FEM simulation, ensures perfect off-axis dispersion typical of in-boat installations, while the sound-transparent mesh grille with a twist-and-lock system guarantees elegance and solid protection. The 25 mm (1”) voice coil woofer, designed for infinite baffle applications, features silicone-insulated leads for extended reliability, complemented by a sealed built-in crossover with resettable tweeter protection and nickel-plated corrosion-resistant terminals. Pure style, powerful sound, and lasting protection, engineered for life at sea.
Component
COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" 2-Way Classic White Coaxial Speaker - Pair...
$374.99
HEX 6.5 C-W marine coaxial features classic grilles will give you years of pure fun while cruising, being over engineered and tested for Marine applications. The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
CLASSIC COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
84.5 (3.33)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1,1 (2.4)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
192,5 mm
7.58 in.
B
128 mm
5.04 in.
C
84,5 mm
3.33 in.
D
60,5 mm
2.38 in.
F
24 mm
0.94 in.
HERTZ Mille Legend Crossover Set - Pair (Mlcx 2 Tw.3...
$469.99
Hertz MLCX 2 TW.3 car audio crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favourite sound.
1. Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability.2. Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listener s favourite sound.3. Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener.4. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter.5. Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune thetransducer s emission.6. Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener.7. Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.8. Air wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.9. High power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter.
Component
Crossover
Power Handling - Peak W
300
Power Handling - Peak Note
150
Depth mm (in.)
41 (1.68)
Adjustment
Tweeter +2 / 0 / -2 dBHi-Boost ON / OFFHi-Contour ON / OFFMid-Contour ON / OFFBi-Amp ON / OFF
Weight of one component - Crossover kg (lb)
0,57 (1.26)
Crossover
Woofer Lo-pass 6 dB Oct.Tweeter Hi-pass 12 dB Oct.Cut-off 2.5 kHz (Mid/Hi-Cont. = ON)3.5 kHz (Mid/Hi-Cont. = OFF)
G
195 mm
7.67 in.
H
119 mm
4.68 in.
I
41 mm
1.61 in.
HERTZ Cento 6.5" 2-Way Component System (Flat Profile) - Pair...
$354.99
The installation of after-market woofers in factory placements limited by a reduced depth is a recurring problem that forces specialists to make complicated mechanical changes, extending the time to finish the job significantly. The Cento line new C 165 F flat profile woofer is the solution, thanks to a super slim basket with reduced depth that allows the use even in the most problematic OEM scenarios, widespread in new generation cars. The R&D team, through an extensive design process was able to obtain high performance even with the super slim basket feature. This was made possible by the optimization of the mobile group excursion and the new design of the cone and dust-cup geometry. Like the other components of the Cento range, the use of SPP-M (Semi-Pressed Paper-Mica) provides the C 165 F with a light and rigid cone at the same time that guarantees high efficiency and an extended frequency response.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
90
Power Handling - Peak W
270
Impedance Ohm
4
Tweeter diaphragm mm (in.)
26 (1)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Sensitivity dB SPL
93
Frequency Response Hz
65 ÷ 22,5k
Crossover Cut off
2,5 kHz @ 12 dB Oct.
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
0,72 (1.59)
Weight of one component - Tweeter kg (lb)
0,03 (0.07)
Weight of one component - Crossover kg (lb)
0,185 (0.41)
D mm
134
Re Ohm
2,7
Fs Hz
80
Le mH
0,154
Vas I
9,40
Mms g
12
Cms mm/N
0,33
BL T*m
3,9
Qts
0,80
Qes
1,00
Qms
3,4
Spl dB
93
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
50,6 mm
1.99 in.
D
43,5 mm
1.71 in.
HERTZ Spl Show 8" Woofer Component - Pair (Sv 200L)
$439.99
The Hertz SV 200L car audio woofers was designed to offer superior performance in terms of both thermal and mechanical capability. The target has been fully hit since the woofer features a pure copper voice coil wound on KSV former, an oversized magnet and a vented bottom plate. The SV 200L employs the proprietary V-cone technology with the cone constructed from pulp with cotton fibre as well as Lossless Polymer Rubber Surround, offering a powerful low frequency response as well as the best off-axis dispersion.
Component
SPL Woofer
Size mm (in.)
200 (8)
Power Handling - Continuous W
250
Power Handling - Peak W
500
Impedance Ohm
4
Voice Coil Ø
50 (2)
Frequency Response Hz
45 ÷ 4,5k
Magnet size D x d x h mm (in.)
120 x 60 x 20 (4.7 x 2.4 x 0.8)
Weight of one speaker kg (lb.)
2,32 (5.1)
Magnet
High density flux ferrite
Cone
Ultra light, non pressed paper
D mm
168
Re Ohm
3
Fs Hz
44
Le mH
0,75
Vas I
29
Mms g
31,5
Cms mm/N
0,42
BL T*m
8,6
Qts
0,33
Qes
0,36
Qms
3,32
Spl dB
94,5
A
209 mm
8.3 in.
B
178 mm
7 in.
C
91 mm
3.6 in.
D
82 mm
3.2 in.
HERTZ Mille Legend 7" Woofer Component - Pair (Ml 1800.3...
$994.99
ML 1800.3 Legend car audio woofers has been thought and designed for the enthusiasts attending contests who need a component merging the timbre accuracy of ML 1650.3 Legend to a wider extension to the low frequencies thanks to the large emission surface, higher power handling and control which only a 50 mm voice coil can ensure. To get to these results, the R&D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite. Like in the suspensions of competition cars, the surround must stand the most extreme working conditions to ensure maximum stability and symmetry at high excursions, and so to achieve impact and extension to the low frequency range. For this reason, the electro-acoustic designers developed a new surround-basket gluing system called “Boundary Free Surround”. This technology, provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure.
Component
Woofer
Size mm (in.)
180 (7)
Power Handling - Continuous W
200
Power Handling - Peak W
400
Impedance Ohm
4
Voice Coil Ø
50 (2)
Frequency Response Hz
38 - 6k
Magnet size D x d x h mm (in.)
90 x 60,7 x 5 (3.54 x 2.39 x 0.2)
Weight of one speaker kg (lb.)
1,71 (3.77)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibres
Xmech mm (in.)
±10 (0.4)
D mm
149
Re Ohm
3,2
Fs Hz
60
Le mH
0,35
Vas I
12,2
Mms g
27,5
Cms mm/N
0,3
BL T*m
7,8
Qts
0,5
Qes
0,53
Qms
7,22
Spl dB
93
A
184 mm
7.24 in.
B
160 mm
6.3 in.
C
88 mm
3.46 in.
D
76 mm
3 in.
E
189,2 mm
7.45 in.
F
27 mm
1.06 in.
HERTZ Mille Legend 6.5" Woofer Component - Pair (Ml 1650.3...
$849.00
During these past few years the Mille line car audio woofers have been the choice of many enthusiasts looking for extreme performance; with ML 1650.3 Legend the Hertz designers increased again the limits of achievable performance for components designed for door installation. To get to these results, the R&D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite. To ensure extraordinary power handling and very high thermal stability even with tracks especially rich of bass frequencies, ML 1650.3 Legend features a 36 mm mobile voice coil. This size ensures the best compromise between power handling and high frequency response. The cone geometry has been subject of in-depth studies with FEA simulations and measurements performed with the Klippel Scan Vibrometer; all that led to the optimization of the V-cone® profile. In the subwoofers and in the woofers, to reproduce the lowest frequency spectrum, the cone needs to move a remarkable amount of air, so it is forced to make long excursions moving like a piston does. The V-cone® profile prevents the cone from deforming during its course, ensuring that the “piston” works in a correct position, maximizing the production of acoustic pressure.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
125
Power Handling - Peak W
250
Impedance Ohm
4
Voice Coil Ø
36 (1.4)
Frequency Response Hz
40 - 6.5k
Magnet size D x d x h mm (in.)
80 x 45 x 5 (3.15 x 1.77 x 0.2)
Weight of one speaker kg (lb.)
1,29 (2.84)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibres
Xmech mm (in.)
±9 (0.35)
D mm
132
Re Ohm
3,3
Fs Hz
65
Le mH
0,24
Vas I
8,3
Mms g
17,5
Cms mm/N
0,3
BL T*m
7
Qts
0,52
Qes
0,52
Qms
5,3
Spl dB
93
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
80 mm
3.15 in.
D
69 mm
2.71 in.
E
170 mm
6.7 in.
F
26 mm
1.02 in.
HERTZ Cento 6.5" Woofer Component - Pair (C 165)
$199.99
Much time was invested in the research of the perfect material for the C 165 woofer cones: through a long process of customisation of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
70
Power Handling - Peak W
210
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
55 ÷ 7k
Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Weight of one speaker kg (lb.)
0,96 (2.12)
Magnet
High density flux ferrite
Cone
Semi-pressed paper+ Mica
Xmech mm (in.)
4,9 (0.19)
D mm
131,5
Re Ohm
3,2
Fs Hz
60
Le mH
0,2
Vas I
13,24
Mms g
13,9
Cms mm/N
0,51
BL T*m
4,9
Qts
0,59
Qes
0,69
Qms
3,9
Spl dB
93
A
165 mm
6.5 in.
B
142 mm
5.59 in.
C
71 mm
2.8 in.
D
62,5 mm
2.46 in.
E
171 mm
6.73 in.
F
24 mm
0.94 in.
HERTZ Spl Show 6X9" 3-Way Coaxial Speaker - Pair (Sx...
$609.99
SX 690 NEO.1 is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and a 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on a polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.
The provided MPG 690 grille is made of a high-resistance ABS plastic structure with a metallic finish and a protective metal mesh.
Component
SPL COAXIAL
Size mm (in.)
in. 6 x 9
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Frequency Response Hz
65 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
110 x 45 x 20 (4.33 x 1.77 x 0.79)
Tweeter Magnet size D x h mm (in.)
24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
1,69 (3.73)
Woofer Magnet
Special Neodymium N38 H
Tweeter Magnet
Special Neodymium N38 H
Cone
Water repellent pressed paper
Dome
Tetolon
D mm
169
Xmax mm
5,5
Re Ohm
3
Fs Hz
65
Le mH
0,4
Vas I
11,29
Mms g
36,1
Cms mm/N
0,16
BL T*m
7,665
Qts
0,62
Qes
0,78
Qms
2,9
Spl dB
94
A
237,5 mm
9.35 in.
B
225 mm
8.86 in.
C
93 mm
3.66 in.
D
85 mm
3.35 in.
E
163 mm
6.42 in.
F
154 mm
6.06 in.
HERTZ Spl Show 6X9" 3-Way Coaxial Speaker - Pair (Sx...
$599.99
SX 690 H NEO coaxial for 2024 Harley is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.
Component
SPL COAXIAL
Size mm (in.)
in. 6 x 9
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Frequency Response Hz
65 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
110 x 45 x 20 (4.33 x 1.77 x 0.79)
Tweeter Magnet size D x h mm (in.)
24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
1,69 (3.73)
Woofer Magnet
Special Neodymium N38 H
Tweeter Magnet
Special Neodymium N38 H
Cone
Water repellent pressed paper
Dome
Tetolon
D mm
169
Xmax mm
5,5
Re Ohm
3
Fs Hz
65
Le mH
0,4
Vas I
11,29
Mms g
36,1
Cms mm/N
0,16
BL T*m
7,665
Qts
0,62
Qes
0,78
Qms
2,9
Spl dB
94
A
237,5 mm
9.35 in.
B
225 mm
8.86 in.
C
93 mm
3.66 in.
D
85 mm
3.35 in.
E
163 mm
6.42 in.
F
154 mm
6.06 in.
HERTZ Spl Show 6.5" 2-Way Coaxial Speaker - Pair (Sx...
$419.99
Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use.
Component
SPL COAXIAL
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Tweeter diaphragm mm (in.)
PEI
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
100 ÷ 20k
Woofer Magnet size D x d x h mm (in.)
70 x 45 x 7 (2.76 x 1.77 x 0.28)
Tweeter Magnet size D x h mm (in.)
19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.)
0,94 (2.08)
Woofer Magnet
Special Neodymium N38 H
Tweeter Magnet
Special Neodymium N38 H
Cone
Water repellent pressed paper
D mm
128
Re Ohm
3,3
Fs Hz
110
Le mH
0,061
Vas I
4,92
Mms g
10,14
Cms mm/N
0,21
BL T*m
5,83
Qts
0,64
Qes
0,68
Qms
9,7
Spl dB
96,5
A
167,2 mm
6.58 in.
B
143,3 mm
5.64 in.
C
69,5 mm
2.74 in.
D
57,8 mm
2.28 in.
HERTZ Spl Show 6.5" Midrange Woofer Component - Pair (Sv...
$334.99
The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.
SV 165.1165 (6.5) mm (in.) | Spl Midrange | 400 W | 4 Ohm
The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.
Component
SPL Midrange
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
150
Power Handling - Peak W
400
Impedance Ohm
4
Voice Coil Ø
38 (1.5)
Frequency Response Hz
100 ÷ 10k
Magnet size D x d x h mm (in.)
110 x 45 x 20 (4.3 x 1.8 x 0.8)
Weight of one speaker kg (lb.)
1,85 (4)
Magnet
High density flux ferrite
Cone
Ultra light pressed paper
D mm
128
Re Ohm
3,2
Fs Hz
110
Le mH
0,26
Vas I
4,65
Mms g
10,4
Cms mm/N
0,2
BL T*m
6,5
Qts
0,5
Qes
0,55
Qms
5,53
Spl dB
97
A
168 mm
6.6 in.
B
145 mm
5.7 in.
C
74 mm
2.9 in.
D
66 mm
2.6 in.
HERTZ Spl Show 1.8" (46Mm) High Efficiency Compression Driver -...
$524.99
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only.
Component
HIGH EFFICIENCY COMPRESSION DRIVER
Size mm (in.)
46 (1.8)
Power Handling - Peak W
120
Power Handling - Peak Note
Hi-pass filtered @ 5 kHz - 12 dB Oct.
Impedance Ohm
4
Voice Coil Ø
35 (1.4)
Frequency Response Hz
2k ÷ 20k
Weight of one component kg (lb.)
0,53 (1.17)
Magnet
Neodymium
Dome
Aluminium
D mm
46
Re Ohm
3,3
Fs Hz
4000
Le mH
0,02
BL T*m
3,5
Spl dB
109
A
69 mm
2.72 in.
B
52 mm
2.05 in.
C
65,7 mm
2.59 in.
D
33,3 mm
1.31 in.
HERTZ Mille Pro 6X9" 3-Way Coaxial Speaker - Pair (Mpx...
$524.99
The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.
Component
Coaxials
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
30 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
107 x 45 x 20 (4.21 x 1.77 x 0.79)
Weight of one speaker kg (lb.)
2.28 (5.03)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±8 (0.31)
D mm
169
Re Ohm
3
Fs Hz
50
Le mH
0,07
Vas I
24
Mms g
30
Cms mm/N
0,34
BL T*m
7,2
Qts
0,43
Qes
0,55
Qms
2
Spl dB
94
A
241 mm
9.49 in.
B
223 mm
8.74 in.
C
108 mm
4.25 in.
D
90 mm
3.54 in.
E
267 mm
10.53 in.
F
38,5 mm
1.52 in.
HERTZ Mille Pro 6.5" 2-Way Coaxial Speaker - Pair (Mpx...
$419.99
The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations.
Component
Coaxials
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
36 (1.42)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 21,5k
Woofer Magnet size D x d x h mm (in.)
90 x 45 x 17 (3.54 x 1.77 x 0.67)
Tweeter Magnet size D x h mm (in.)
29.5 x 22 x 4 (1.16 x 0.87 x 0.16)
Weight of one speaker kg (lb.)
1.27 (2.8)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±6 (0.24)
D mm
132
Re Ohm
3,1
Fs Hz
90
Le mH
0,01
Vas I
4
Mms g
18,9
Cms mm/N
0,15
BL T*m
5,8
Qts
0,88
Qes
1,06
Qms
5,5
Spl dB
92
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D
62,6 mm
2.46 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Pro 3" Midrange Speaker - Pair (Mp 70.3...
$314.99
The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @250Hz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
180 ÷ 18k
Magnet size D x d x h mm (in.)
19.7 x 0 x 2 (0.78 x 0 x 0.08)
Weight of one speaker kg (lb.)
0.17 (0.37)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
D mm
65
Re Ohm
3,7
Fs Hz
110
Le mH
0,12
Vas I
1
Mms g
2,9
Cms mm/N
0,7
BL T*m
2,8
Qts
0,82
Qes
1
Qms
4,6
Spl dB
88
A
87,8 mm
3,46 in.
B
73 mm
2,87 in.
C
50 mm
1.97 in.
D
44 mm
1.73 in.
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Mille Pro 28Mm (1.38") Tweeters And Crossovers - Pair...
$314.99
MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k ÷ 25k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,075 (0.16)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,024
Vas I
-
Mms g
0,4
Cms mm/N
0,08
BL T*m
2
Qts
1,1
Qes
1,7
Qms
3,3
Spl dB
91
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
28 mm
11.1 in.
D
13,5 mm
0.53 in.
E
72 mm
2.8 in.
F
45,6 mm
1.8 in.
G
23 mm
0.9 in.
HERTZ Mille Pro 25Mm (1") Tweeter - Pair (Mp 25.3...
$259.99
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Component
Tweeter
Size mm (in.)
29 (1.14)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
1.4k ÷ 22.5k
Magnet size D x d x h mm (in.)
24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
0.07 (0.14)
Magnet
Neodymium
Dome
Tetolon
D mm
29
Re Ohm
3,9
Fs Hz
1200
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,1
BL T*m
1,6
Qts
0,55
Qes
1,98
Qms
0,57
Spl dB
91
A
44 mm
1.73 in.
B
41 mm
1.61 in.
C
27 mm
1.06 in.
D
17 mm
0.67 in.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
