
Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1165mm(W) X...
$2,160.00
$2,400.00
This Rack Kit is for truck canopies/camper shells/caps and trailers
Roof Top Size: Approximately 1165mm/45.9'' (W) x 2368mm/93.2'' (L)
The Slimline II Tray mounts to eight (8) supplied Feet that slide into the supplied Track. The 2 x 750mm/29.5" long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Included in the Kit:
All Front Runner Rack Kits contain installation instructions
All the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,804.00
$2,005.00
This Rack Kit is for truck canopies/camper shells/caps and trailers
Roof Top Size: Approximately 1165mm/45.9'' (W) x 2166mm/85.3'' (L)
The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
Included in the Kit:
All Front Runner Rack Kits contain installation instructions
All the components needed to mount the Slimline II Tray to your vehicle.
For Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1165mm(W) X...
$2,048.00
$2,275.00
This Rack Kit is for truck canopies/camper shells/caps and trailers
Roof Top Size: Approximately 1165mm/45.9'' (W) x 2166mm/85.3'' (L)
The Slimline II Tray mounts to eight (8) supplied Feet that slide into the supplied Track. The 2 x 750mm/29.5 long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Included in the Kit:
All Front Runner Rack Kits contain installation instructions
All the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1165mm(W) X...
$1,757.00
$1,952.00
This Rack Kit is for truck canopies/camper shells/caps and trailers
Roof Top Size: Approximately 1165mm/45.9'' (W) x 1762mm/69.4'' (L)
The Slimline II Tray mounts to eight (8) supplied Feet that slide into the supplied Track. The 1600mm/63” long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Included in the Kit:
All Front Runner Rack Kits contain installation instructions
All the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,507.00
$1,674.00
This Rack Kit is for truck canopies/camper shells/caps and trailers
Roof Top Size: Approximately 1165mm/45.9'' (W) x 1762mm/69.4'' (L)
The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
Included in the Kit:
All Front Runner Rack Kits contain installation instructions
All the components needed to mount the Slimline II Tray to your vehicle.
Compatibility Requirements:
Slot base width: min 20mm / max 25mm
Slot base height: min 6.5mm / max 10mm
Slot opening width: min 8.5mm / max 10.5mm
Slot opening height: min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$950.00
$1,056.00
This Rack Kit is for truck canopies/camper shells/caps and trailers
Roof Top Size: Approximately 1165mm/45.9'' (W) x 954mm/37.6'' (L)
The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
Included in the Kit:
All Front Runner Rack Kits contain installation instructions
All the components needed to mount the Slimline II Tray to your vehicle.
Compatibility Requirements:
Slot base width: min 20mm / max 25mm
Slot base height: min 6.5mm / max 10mm
Slot opening width: min 8.5mm / max 10.5mm
Slot opening height: min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1165mm(W) X...
$956.00
$1,062.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 752mm/29.6'' (L).
The Slimline II Tray mounts to four (4) supplied Feet that slide into the supplied Track. The 750mm/29.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$834.00
$927.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 752mm/29.6'' (L).
The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,404.00
$1,560.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 1560mm/61.4'' (L).
The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1255mm(W) X...
$1,499.00
$1,666.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L).
The Slimline II Tray mounts to six (6) supplied Feet that slide into the supplied Track. The 1500mm/59” long pair of tracks can be easily mounted to your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
See the Track installation instructions in the INSTALL tab for further details.

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,306.00
$1,451.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L).
The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,252.00
$1,391.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L).
The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,072.00
$1,191.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1156mm/45.5'' (L).
The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1165mm(W) X...
$1,233.00
$1,370.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1156mm/45.5'' (L).
The Slimline II Tray mounts to four (4) supplied Feet that slide into the supplied Track. The 1150mm/45.3 long pair of tracks can be easily mounted to your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall...
$1,346.00
$1,496.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1560mm/61.4'' (L).
The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
Front Runner Ute Canopy or Trailer Slimline II Rack Kit / Tall / 1165mm(W) X...
$1,449.00
$1,610.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L).
The Slimline II Tray mounts to six (6) supplied Feet that slide into the supplied Track. The 1400mm/55.1” long pair of tracks can be easily mounted to your canopy/shell or trailer.
See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*

Front Runner
FRONT RUNNER TOYOTA TACOMA (2015-2023) 6' BED ALU-CAB EXPLORER CANOPY SLIMLINE II RACK KIT -KRCA096T
$1,800.00
$2,000.00
This kit includes a full-size rack for the Toyota Tacoma Alu-Cab Explorer Canopy . The rack size is approximately 1255mm/49.4" (W) x 1964mm/77.3" (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This kit is only suitable for Alu-Cab Explorer Canopy.
Consisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.36kg (60.32lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 170mm (7")Shipping Weight:Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2015-2023) 6' BED ALU-CAB CONTOUR CANOPY SLIMLINE II RACK KIT -KRCA095T
$1,895.00
$2,106.00
This kit includes a full-size rack for the Toyota Tacoma Alu-Cab Contour Canopy. The rack size is approximately 1345mm/53" (W) x 1964mm/77.3" (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This kit is only suitable for Alu-Cab Contour Canopy.
Consisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.03kg (64lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 34kg (75lbs)

Front Runner
Front Runner Pickup Truck Canopy or Trailer Slimline II Rack Kit / 1345mm(W) X 1358mm(L)...
$1,587.00
$1,763.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 1500mm/59.1" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)1x TRCA004 - Canopy Tracks / 1500mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.17kg (62.1lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")Shipping Weight:Weight: 29kg (64lbs)

Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) RSI SMART CANOPY SLIMLINE II RACK KIT -KRCA092T
$1,417.00
$1,575.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Gladiator JT RSI Smart Canopy contains a Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.65kg (54.34lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 155mm (6")Shipping Weight:Weight: 25kg (55lbs)

Front Runner
Front Runner RSI Smart Canopy Slimline II Rack Kit / Full Size Pickup 6.5' Bed...
$1,525.00
$1,694.00
This 1762mm/69.4" long, full-size, Slimline II cargo carrying roof rack kit for the RSI Extra Cab Smart Canopy contains a Slimline II Tray, Wind Deflector and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTA09 - SLII Tray - 1165mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 26.68kg (58.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 155mm (6")Shipping Weight:Weight: 27.6kg (61lbs)

Front Runner
Front Runner Cargo Slide/Fridge Slide / 40L to 52L- FSLI005
$423.00
$470.00
This slide system makes accessing your fridge or other heavy gear quick and simple while using minimal space.
Mountable to any flat surface, including Front Runner drawer systems and pick-up truck beds.
Mounting holes are predrilled.
High strength bearing drawer slides allows the tray to extend nearly 100% from the anchored base.
Unique design keeps the slide rattle free when closed.
A clip latch securely locks the drawer in the closed position.
Features a hold open mechanism to prevent the slider from closing when the vehicle is parked on uneven surfaces.
Finished in the same durable weather resistant black powder coating as the Front Runner Slimline II Roof Rack.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Mounting hardware included for wood and metal surfaces.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately,
Consists of:1x Fridge SlideInstallation HardwareFitting InstructionsMaterials used:Black powder-coated mild steelProduct Dimensions:Overall Dimensions793mm (31.2") L x 535mm (21.1") W x 85mm (3.3") HClosed Dimensions:793mm (31.2") L x 533mm (21.0") W x 85mm (3.3") HOpened Dimensions:1529mm (60.2") L x 533mm (21.0") W x 85mm (3.3") HInner Dimensions:735mm (28.9") L x 460mm (18.1") W x 64mm (2.5") HWeight:16.4kg (36.2lbs)Load Rating:113Kg (250lbs)

Front Runner
FRONT RUNNER JEEP CHEROKEE SPORT XJ SLIMLINE II ROOF RACK KIT / TALL -KRJCT02L
$1,953.00
$2,170.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)

Front Runner
FRONT RUNNER SUZUKI JIMNY (2018-CURRENT) DROP DOWN TABLE -TBRA056
$464.00
$516.00
An essential accessory to add to your Front Runner Expander Camping Chair*.
Creates a foldable table on either side of the Expander Chair.
Secures to the frame of the Expander Chair's seat and hooks on the armrest to place your belongings.
Ideal for camping, sports events, the beach, and any other activities.
Once secured the table top folds up with the chair and can be stored together in the Expander Chair Storage Bag .
Features an integrated cut-out to place a glass/wine glass conveniently next to your chair at an easy-to-reach height.
Made from aluminum and high-strength steel and sealed in the same weather-resistant finish as all Front Runner racks.
* The Front Runner Expander Camping Chair is not included and must be purchased separately.
Features
Consists of:
1 x Side Table Top
1 x Table Hinge
1 x Strap
1 x Table Hook
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated aluminium
Black Powder coated high strength steel
Product Dimensions:
190mm (7.5") L x 267mm (11.7") W
Weight:
0.48kg (1.1 lbs)

Front Runner
Front Runner Toyota Land Cruiser 100 Series Slimsport Rack 40in Light Bar Wind Fairing -RRAC282
$174.00
$193.00
Light Bar wind fairing for Toyota Land Cruiser 100 Series Slimsport Roof Rack Kit / Lightbar Ready
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1286mm (50.6") L x 162mm (6.4") W x 148mm (5.8") H
Weight:
3.14kg (6.9lbs)

Front Runner
Front Runner Wind Fairing for Low Profile Rack / 1345mm/1425mm(W) -RRAC175
$215.00
$239.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1262mm (49.7") L x 2mm (0.1") W x 127mm (5") H
Weight:
1.6kg (3.5lbs)

Front Runner
Front Runner Wind Fairing for Rack / 1165mm/1255mm(W) -RRAC143
$233.00
$259.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: This Wind Fairing is not suitable for the Toyota Rav4 Adventure Models
Note: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.1kg (2.4lbs)

Front Runner
Front Runner Wind Fairing For Rack / 1255mm (W) -RRAC311
$234.00
$260.00
This Wind Fairing will reduce drag and wind noise while pushing airflow up and over your rack's cargo. It's easy to secure the Wind Fairing to your rack in just three simple steps.
Note: May interfere with sunroof operation on some vehicles.
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
1 x Protective Vinyl Strip
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1180mm (46.5") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.9kg (4.2lbs)

Front Runner
Front Runner Wind Fairing for Rack / 1475mm(W) -RRAC145
$260.00
$289.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H
Weight:
1.5kg (3.3lbs)

Front Runner
Front Runner Wolf Pack Pro Rack Mounting Bracket / MKII -RRAC257
$98.00
$109.00
Secures and holds the Wolf Pack Pro firmly in place on top of your rack.
Can be used with the Wolf Pack Pro Hi-Lid.
The versatile placement allows the Wolf Pack Pro to be secured either length or crossways on the rack.
Effortlessly access the Wolf Pack Pro by easily releasing the quick-release latch.
The bracket can be locked with a padlock or Rack Accessory Lock / Small (not included) for extra security and peace of mind.
Can be used together with Adjustable Rack Cargo Chocks for extra support on extreme terrain.
Made from steel and powder coated with the same durable coating as the Front Runner rack.
Installation hardware and fitting instructions are included.
Features
Consists of:
1 x Wolf Pack Pro Mounting Brackets
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
101mm (4") L x 309mm (12.2") W x 255mm (10") H (Per Bracket)
Weight:
1.65kg (3.6lbs)

Front Runner
Front Runner Ute Slimline II Load Bed Rack Kit / 1165(W) x 1358(L) -KRLB006T
$1,475.00
$1,639.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1165mm/45.9" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*This rack fits a load bed width of 1000mm - 1320mm (39-52") and length of 1270mm - 1550mm (50-61").For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 23kg (51lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")Shipping Weight:
Weight 26.8kg (58.9lbs)

Front Runner
FRONT RUNNER TOYOTA HILUX (2005-2015) SLIMLINE II ROOF RACK KIT -
$1,398.00
$1,553.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Hilux (2005-2015). Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FATH001 - Toyota Hilux (2005-2015) Foot Rails - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)

Front Runner
FRONT RUNNER TOYOTA HILUX (2005-2015) SLIMLINE II ROOF RACK KIT / TALL -KRTHT08T
$1,319.00
$1,466.00
This 1156mm/45.5" long full size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Drilling is required for installation.
This 1156mm/45.5" long full size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x FASS015 - Foot Set Angled / 75mm - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.0kg (50.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0")
Shipping Weight:26.3kg (58.0lbs)

Front Runner
Front Runner Toyota Hilux (2005-2015) Spare Wheel Lock -SWLT002
$112.00
$125.00
Front Runner Spare Wheel Lock / Toyota Hilux 2005 - 2015

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 78 SLIMLINE II 3/4 ROOF RACK KIT -KRTL018L
$2,339.00
$2,599.00
This 2166mm/85.3" long, 3/4 Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser 78 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL018L - Toyota Land Cruiser 78 3/4 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x LASD105 - No 5 Leg Diagonal 190mm (Pair) - by Front Runner
3 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRSTJ11 - Slimline II Tray - 1425mm(W) X 2166mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.2kg (90.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
40.4kg (89.0lbs)

Front Runner
FRONT RUNNER TOYOTA TUNDRA CREW CAB (2022-CURRENT) SLIMSPORT RACK WIND FAIRING -RRAC263
$226.00
$251.00
A wind fairing for the Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab Slimsport Rack Wind Fairing
1 x Fitment Guide
1 x Installation Hardware
Materials used:
Black powder coated steel
Product Dimensions:
1460mm (57.5") L x 250mm (9.8") W x 50mm (2") H
Weight:
4.7kg (10.3lbs)

Front Runner
Front Runner Universal Track Non Drilled / 1800mm(L) -TRAC010
$251.00
$279.00
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
Suitable for universal fitment of a roof rack should the vehicle roof allow.
Often used for trailers and canopies to mount a rack or load bars.
Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
Powder coated black.
Comes in pairs.
Features
Consists of:
1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide
Materials used:
Black powder coated aluminum
Rubber
Product Dimensions:
1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H
Weight:
2.6kg (5.7lbs)

Front Runner
Front Runner Universal Vehicle Ladder / Medium -LADD019
$521.00
$579.00
This ladder bolts to the body or to the rear barn doors of vans or utility vehicles.
Surface required to secure the ladder to the vehicle is 1060mm 1780mm / 41.7" - 70".
The ladder has 6 steps.
Length from bottom step to top step is 1460mm / 57.5".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Universal Vehicle Ladder / Medium
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated steel and aluminium
Product Dimensions:
Overall Ladder Length:
Min 1485mm / 58.4"
Max 1786mm / 70.3"
Mounting hole centers:
Min 1022mm / 40.2"
Max 1738mm / 68.4"
Mounting surface required:
Min 1060mm / 41.7"
Max 1780mm / 70"
Weight:
7.87Kg (17.4lbs)

Front Runner
Front Runner Universal Vehicle Ladder / Short -LADD018
$483.00
$537.00
This ladder bolts to the body or to the rear barn doors of vans or utility vehicles.
Surface required to secure the ladder to the vehicle is 770mm 1480mm / 30.3" - 58".
The ladder has 5 steps.
Length from the bottom step to the top step is 1160mm / 45.7"
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Universal Vehicle Ladder / Short
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
Overall Ladder Length:
Min 1180mm / 46.4"
Max 1486mm / 58.5"
Mounting hole centers:
Min 722mm / 28.4"
Max 1438mm / 56.6"
Mounting surface required:
Min 770mm / 30.3"
Max 1480mm / 58"
Weight:
7.25kg (16lbs)

Front Runner
Front Runner Water Tank / 67l/17.7Gal -WTAN023
$266.00
$295.00
For showers, drinking, and cooking, this universal 67l (17.7gal) water tank mounts to any flat surface.
Moulded with slots along the sides of the tank to accommodate tie-down straps.
67l (17.7gal) capacity.
Made from food grade polyethylene and is BPA free.
This tank has plastic pipe fittings and The Water Tank Hose Kit for this water tank is sold separately.
Features
Material used:
Tank: BPA-free polyethylene
Fittings: Plastic
Capacity:
67l (17.7gal)
Product Dimensions:
L 950mm (37.4") x H 260mm (10.2") x W 300mm (11.8")
Weight:
6.98kg (15.4lbs)
Special Notes
SKU: CR1038-GY-COMP

Front Runner
Front Runner Water Tank 67l/17.7Gal Drawer System Mounting Kit -WTAN025
$29.00
$32.00
This Mounting System enables you to mount the Front Runner 67L Water Tank - Universalto one of our Drawer Systems or any other flat surface.
Features
Consists of:
4x Brackets
Nuts and bolts kit
Materials used:
Black powder-coated mild steel
Weight:
1kg (2.2lbs)

Front Runner
Front Runner Water Tank Cap -WTAN018
$15.00
$17.00
Get yourself a spare water tank cap, just in case your water tank loses it's top.
Please note: This water tank cap is only compatable with WTAN002, WTAN007, WTAN008, WTAN022, WTAN023.
Features
Product Dimensions:
70mm (2.8") Diameter x 25mm (1") H
Special Notes
SKU: BO161

Front Runner
Front Runner Water Tank Hose Kit -WTAN014
$41.00
$46.00
Includes a hose bracket that can attach to the tops or sides of Front Runner Slimline II Racks.
Features a standard Quick Release hose fitting for further customization of nozzles, taps, additional hoses, splitters, etc.
Features
Consists of:
1x 10mm (0.4") diameter x 1500mm (59") length of clear hose
1x Raco fitting
1x Raco fitting stopper
1x Hose clamp
1x Roof rack pipe bracket with nut and bolt
1x Right angled tank to pipe fitting
1x Straight tank to pipe fitting

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 100/LEXUS LX470 SLIMLINE II ROOF RACK KIT -KRTL029T
$2,134.00
$2,371.00
This 1964mm/77.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 100/Lexus LX470. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL029T - Toyota Land Cruiser 100 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATL002 - Toyota Land Cruiser 100 Foot Rails - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.5kg (91.3lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 200/LEXUS LX570 SLIMLINE II 1/2 ROOF RACK KIT -KRTL032T
$1,489.00
$1,654.00
This 1156mm/ 45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Land Cruiser 200 or Lexus LX570. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: For fitment to the Lexus LX570, the flush roof rails are required to be removed and the headliner will need to be lowered.
Features
KRTL032T - Toyota Land Cruiser 200 Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATL001 - Toyota Land Cruiser 200 Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.8kg (72.1lbs)

Front Runner
Front Runner Universal Quick Release Tent Channel Set / 4 Piece -TBMK038
$41.00
$46.00
A set of 4 plates that allow you to mount your Ikamper / Eezi Awn / Ironman / Gravity tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece.
These black powder-coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
Quick Release Tent Mount Kit / 4 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools.
NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment.
Features
Consists of:
2 x Pair of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
95mm (3.7") L x 33.5mm (1.3") W x 4mm (0.15") H (Single Nut Plate)
Weight:
0.52kg (1.15lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 100 SERIES SLIMSPORT ROOF RACK KIT / LIGHTBAR READY -KSTL003T
$1,484.00
$1,649.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2280mm (89.8") x 1289mm (50.7").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40 LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Features
KSTL003T - Toyota Land Cruiser 100 Series Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray
1x RRAC282 - Toyota Lnd Crusr 100 series Slmsprt 40" lgt Bar W
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 36.99kg (81.55lbs)
Assembled Rack Kit Dimensions:
2280mm (89.8") L x 1289mm (50.7") W x 150mm (5.9") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 39kg (86lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 80 LOAD BAR KIT / GUTTER MOUNT -KRTL037
$465.00
$517.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTL037 - Toyota Land Cruiser 80 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 115mm (5")
Length 1455mm (57")
Height 180mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-2023) SLIMLINE II ROOF RACK KIT / LOW PROFILE -KRTT005T
$1,276.00
$1,418.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Tacoma 2005+. Easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit will allow your sunroof to open completely, but it will not allow the sunroof to be operated in tilt/vent mode. If you would like to operate the sunroof in tilt/vent mode, you can use Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit, provided that you do not mount a table underneath.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTT005T - Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATT004 - Toyota Tacoma (2005-Curr) Foot Rails/Low Profile1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.51kg (54.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1610mm (63"); Height: 240mm (9")
Shipping Weight:
Weight: 24.53kg (54lbs)

Front Runner
Front Runner Toyota Tacoma (2005-Current) Slimsport Rack Wind Fairing -RRAC231
$111.00
$123.00
A wind fairing for the Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tacoma Slimsport Rack Wind Fairing
1 x Protection Strip
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1185mm (46.7") L x 170mm (6.7") W x 141mm (5.6") H
Weight:
3.2kg (7.1lbs)