
TJM
XGS GREASABLE SHACKLE (EACH) FOR MITSUBISHI TRITON
$49.01
Shackles are an integral component of the suspension system that attaches between the leaf spring and vehicle frame. As a leaf spring flexes up or down, its length from main eye to shackle eye changes. Since one end is mounted solidly (the main eye), and cannot move, length changes occur at the shackle end of the leaf pack. TJM greaseable shackles allows regular greasing to lubricate the bushes with no dismantling required for access.
Package Weight:
1.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS COIL SPRINGS REAR RAISED PROGRESSIVE 200KG (PAIR) FOR MITSUBISHI CHALLENGER / MITSUBISHI PAJERO
$409.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Progressive rate
Coil Location:
Rear
LBA:
200kg
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
16.00 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI PAJERO NH-NJ-NK 05/91-12/96
MITSUBISHI PAJERO NL GL/GLX 01/97-04/00
MITSUBISHI PAJERO NL GLS/EXCEED 09/97-04/00

TJM
XGS COIL SPRINGS REAR RAISED PROGRESSIVE 100-150KG (PAIR) FOR MITSUBISHI PAJERO
$310.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Progressive rate
Coil Location:
Rear
LBA:
100-150kg
Lift:
0-40mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
17.50 kg
Compatible Vehicles
MITSUBISHI PAJERO NS-NT 11/06-09/11
MITSUBISHI PAJERO NW 10/11-06/14
MITSUBISHI PAJERO NX 07/14-On
MITSUBISHI PAJERO NM-NP 05/00-10/06

TJM
XGS COIL SPRINGS REAR RAISED 0-50KG (PAIR) FOR MITSUBISHI PAJERO SPORT QE 12/15-01/20/ MITSUBISHI PAJERO...
$299.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Rear
LBA:
0-50kg
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
13.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24

TJM
XGS COIL SPRINGS FRONT RAISED 60KG+ (PAIR) FOR MITSUBISHI PAJERO
$320.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
60kg+
Lift:
0-40mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
12.28 kg
Compatible Vehicles
MITSUBISHI PAJERO NS-NT 11/06-09/11
MITSUBISHI PAJERO NW 10/11-06/14
MITSUBISHI PAJERO NX 07/14-On
MITSUBISHI PAJERO NM-NP 05/00-10/06

TJM
XGS COIL SPRINGS FRONT RAISED 50KG+ (PAIR) FOR MITSUBISHI PAJERO SPORT/ MITSUBISHI TRITON MQ 04/15-11/18...
$290.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
50kg+
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
10.65 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS COIL SPRINGS FRONT RAISED 50KG+ (PAIR) FOR MITSUBISHI CHALLENGER / MITSUBISHI CHALLENGER PC/ MITSUBISHI...
$320.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
50kg+
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
10.65 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS COIL SPRINGS FRONT RAISED 0-50KG (PAIR) FOR MITSUBISHI PAJERO SPORT / MITSUBISHI TRITON MQ...
$310.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
0-50kg
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
11.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM VENTURER HOOP BLACK STEEL FOR MITSUBISHI TRITON MV
$165.00
The TJM Venturer removable hoop features a strong multi-fold channel, all-steel construction and a bold design that perfectly complements your Mitsubishi Triton. The TJM Venturer hoop lets you customise the look of your Venturer bar, allowing the fitment of TJM light bars and aerials of your choice. Take the lead with this custom hoop for your TJM Venturer bar.
Material:
Matte Black textured steel
Suits:
Compatible with Ultimate 24” Light Bar X1 or Ultimate 8” Light Bar up to X3
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD TRANSMISSION STEEL BLACK/ MITSUBISHI CHALLENGER PB / MITSUBISHI TRITON MN /ML
$200.00
Keep your vehicle's vital underbody components protected with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. Our under-body guards are shot blasted, immersed in zinc phosphate and black powdercoat for corrosion resistance and durability. For maximum protection combine a front under-body guard, sump guard and transmission guard.
FEATURES:
Material:
Electrocoated 3mm Steel with Black Powdercoat Finish
Size:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Suits:
All models
Kit:
Combine with Front & Sump Guards for total protection
Package Weight:
12.00 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM UNDERBODY GUARD TRANSMISSION/ MITSUBISHI TRITON MV 03/24-ON GLX
$260.00
Keep the vital components protected on your Mitsubishi Triton with a TJM Transmission Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
13.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD SUMP FOR MITSUBISHI TRITON MV 03/24-ON
$180.00
Keep the vital components protected on your Mitsubishi Triton with a TJM Sump Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
7.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD SUMP FOR MITSUBISHI TRITON MV 03/24-ON GLX
$180.00
Keep the vital components protected on your Mitsubishi Triton with a TJM Sump Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
7.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD FRONT STEEL BLACK FOR MITSUBISHI PAJERO SPORT / MITSUBISHI TRITON MQ/MR
$175.00
Keep your vehicle's vital components out of the firing line with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. TJM under-body guards will take the brunt of lower off-road collisions, ensuring vital components are shielded from direct impact. A black powdercoat finish and corrosion resistance offer additional protection.
FEATURES:
Material:
Electrocoated 3mm steel with black powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Kit:
Combine with Sump & Transmission Guards for total protection
Package Weight:
11.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM UNDERBODY GUARD FRONT FOR MITSUBISHI TRITON
$295.00
Keep the vital components protected on your Mitsubishi Triton a with a TJM Front Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powder coat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
10.00 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM U-BOLT W/FLANGE NUTS TYPE B OD14 W75 L185 FOR MITSUBISHI TRITON
$19.00
TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This U-bolt is 14 x 75 x 185mm with a and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.
Size:
Square Top - Material OD 14mm - Inside Width 75mm - Inside Length 185mm
Package Weight:
0.49 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM U-BOLT W/FLANGE NUTS TYPE B OD12 W77 L190 FOR MITSUBISHI TRITON
$19.00
TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This XGS U-bolt is 12 x 72 x 170mm with a square top (B) and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.
Size:
Square Top - Material OD 12mm - Inside Width 72mm - Inside Length 190mm
Package Weight:
0.43 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM SUPPLEMENTARY WIRING KIT. SUITS TJM BULL BAR FOR MITSUBISHI PAJERO SPORT QF 02/20-03/24
$330.00
Plug and play wiring loom to suit the ancillary lights fitted to a TJM bull bar.
Suits:
Pajero Sport 02/20 On
Package Weight:
0.03 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QF 02/20-03/24

TJM
TJM SUPPLEMENTARY WIRING KIT SUIT TJM BULLBAR FOR MITSUBISHI TRITON MQ
$120.00
Plug and play wiring loom to suit the ancillary lights fitted to a TJM bullbar.
FEATURES:
Suits:
Triton MQ GLS and Exceed Models
Package Weight:
0.20 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM SUPPLEMENTARY WIRING KIT SUIT TJM BULLBAR FOR MITSUBISHI TRITON MR
$200.00
Plug and play wiring loom to suit the ancillary lights fitted to a TJM bullbar.
FEATURES:
Suits:
Mitsubishi Triton MR 12/18-On All models
Package Weight:
0.30 kg
Compatible Vehicles
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM SUPPLEMENTARY WIRING KIT SUIT TJM BULLBAR FOR MITSUBISHI TRITON MQ
$110.00
Plug and play wiring loom to suit the ancillary lights fitted to a TJM bullbar.
FEATURES:
Suits:
Triton MQ GLX Models
Package Weight:
0.20 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM SUPPLEMENTARY WIRING KIT SUIT TJM BULLBAR FOR MITSUBISHI PAJERO NX 07/14-ON
$130.00
Plug and play wiring loom to suit the ancillary lights fitted to a TJM bullbar.
FEATURES:
Suits:
Mitsubishi Pajero NX 07/14-On All models
Package Weight:
0.40 kg
Compatible Vehicles
MITSUBISHI PAJERO NX 07/14-On

TJM
TJM SIDE BAR MODULAR STEEL SAT BLACK 63MM FOR MITSUBISHI TRITON MR 12/18-02/24 4DR C/C...
$375.00
Genuine TJM Side Bars are designed to give your Triton total protection in the un-likely event of side impact whilst off roading. Designed to fit with TJM bull bars and integrate with TJM Side Steps as an option, you are sure to experience un-rivalled protection. Using TJM's solid steel side bar clamping system combined with a TJM Bull Bar you have completed your full off road protection kit to tackle any off road track and more. Our Side Bars are engineered to prevent air bag deployment for low level collisions, thanks to an integrated crumple zone for piece of mind and safety.
FEATURES:
Material:
Black powdercoat steel
Size:
63mm tube
ADR:
ADR Airbag Compliant. Does not void vehicle manufacturers warranty
Suits:
Dual Cab only
Tech:
Only fits with modular side steps (735SBSSA50Q)
Package Weight:
16.60 kg
Compatible Vehicles
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM SIDE STEPS MODULAR STEEL SAT BLACK 63MM FOR MITSUBISHI TRITON MQ 04/15-11/18 4DR C/C...
$1,150.00
TJM's modular range of side protection steps offer easy access and lower side protection for your Triton. When combined with side bars your vehicle will have excellent wheel arch, flare, sill and panel protection. Designed to work in conjunction with the frontal protection systems of a bull bar and prevents air bag deployment for softer collisions. Our modular design gives you the option to install side steps first, then add side bars later.
FEATURES:
Material:
Black powdercoat steel with alloy checker plate step tread
Size:
Chassis mounted 63mm tube
ADR:
Side Airbag Compliant
Suits:
Dual Cab models only
Tech:
Optional side bars available (780SBKIT50Q)
Package Weight:
33.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM SIDE STEPS MODULAR STEEL SAT BLACK 50MM FOR MITSUBISHI TRITON MN 09/09-03/15
$1,150.00
TJM's range of side protection steps offer easy access and lower side protection for your Triton. With 50mm black ed tube chassis mounted and a silver alloy checker plate step tread. Get 4x4 Equipped and take the lead with TJM Side Steps.
FEATURES:
Material:
Black powdercoat steel with silver alloy checker plate step tread
Size:
Chassis mounted 50mm tube
ADR:
Side Airbag Compliant
Suits:
Dual Cab and Single Cab models
Package Weight:
48.00 kg
Compatible Vehicles
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM PREMIUM CANOPY D/C IMPULSE BLUE D23 FOR MITSUBISHI TRITON M (IN STORE PICK-UP ONLY)
$4,799.00
*Please note that images are for illustration purposes only. The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. Your cargo will be kept safe and secured in style for many years to come!
FEATURES:
Colour:
Impluse Blue D23
Suits:
Dual Cab
Cental Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up.
Construction:
Fibreglass
Finish:
Smooth exterior, felt lined interior.
Lights:
LED Brake Light and LED Interior Light
Standard Accessories:
Roof Rails, Rear Spoiler
Optional Accessories
Rhino Roof Racks (100kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY D/C GRAPHITE GREY M08 FOR MITSUBISHI TRITON (IN STORE PICK-UP ONLY)
$4,799.00
*Please note that images are for illustration purposes only. The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. Your cargo will be kept safe and secured in style for many years to come!
Colour:
Graphite Grey
Suit:
Dual Cab
Central Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up
Construction:
Fiberglass
Finish:
Smooth exterior, felt lined interior
Light:
LED Brake Light ad LED Interior Light
Standard Accessories:
Roof Rail, Rear Spoiler
Optional Accessories:
Rhino Roof Racks (100 kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY D/C EARTH GREEN F27 FOR MITSUBISHI TRITON MQ (IN STORE PICK-UP ONLY)
$4,799.00
The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come!
FEATURES:
Colour:
Earth Green F27
Suits:
Dual Cab
Cental Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up.
Construction:
Fibreglass
Finish:
Smooth exterior, felt lined interior.
Lights:
LED Brake Light and LED Interior Light
Standard Accessories:
Roof Rails, Rear Spoiler
Optional Accessories
Rhino Roof Racks (100kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM VENTURER BULL BAR BLACK STEEL FOR MITSUBISHI TRITON MV 03/24-ON GLX (IN STORE PICK-UP...
$2,200.00
This genuine TJM Bull Bar has been created to complement the design of the Mitsubishi Triton The TJM Venturer bar delivers all-star looks and real-world protection where it counts. The Venturer features a boldly angular design with tapered wings that enhances the front of this Aussie icon product while also offering supreme impact protection. The TJM Venturer bar is put through a comprehensive design and testing process to ensure that it is ADR compliant, winch compatible and compatible with all your vehicles Safety and Technology features. Better yet, the TJM Venturer bar is embedded with TJM bull bar DNA, meaning it features an all-steel construction, winch facilities and rated recovery points as standard and an eye-catching design that enhances the aesthetics and functionality of the Mitsubishi Triton. Add our optional top hoop to stand out in the crowd and Take the Lead with TJM.
Material:
Matt black textured steel
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Tech:
Compatible with all OE Safety Systems including Cross Traffic Alert
Winch:
Rated to 9500lb/4300kg. Hawse Fairlead Winches only
Recovery:
Integrated 8000kg Rated Recovery Points. High lift jack points.
Lights:
Suits; TJM Seeker & TJM Ultima Light range and off road work lights
Aerial:
Dual aerial mount locations
Package Weight:
69.00 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM SIGNATURE BULL BAR POLISHED ALLOY FOR MITSUBISHI PAJERO SPORT QF 02/20-03/24 (IN STORE PICK-UP...
$3,700.00
Sporting sharp looks and cutting-edge performance, a Genuine TJM Signature bull bar will add value to your Pajero Sport. This TJM Signature bull bar is 4x4 equipped with a integrated steel winch-mount mount, integrated rated recovery points, LED combination lights plus optional fitment of LED or LED DRL fog lights ( model dependent). Meanwhile, it's ready to provide a home for additional accessories with dual aerial mounts and mounting points for installing driving lights. Upper pipework provides additional strength, obstacle deflection and headlight protection. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Whether you are in the big smoke or carving out your own adventure, the Signature range is an Aussie legend in the making.
Material:
Polished Alloy
Size:
76mm Centre Tube 63mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Suits:
PAJERO SPORT QF 11/19 - ON (NOT EXCEED or GSR MODEL)
Tech:
Compatible with MiTEC features, Adaptive Cruise Control, Autonomous Emergency Braking, Forward Collision Mitigation and Multi Around Monitor
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Integrated 8000kg Rated Recovery Points
Fog:
Optional Fog Lights 425TJMLEDFG. If harness required for Fog operation (033WHSPOTFOGSAA)
Indicators:
LED Indicator Park Lights
Lights:
Suits 180mm TJM Seeker & Ultima light range (size restriction due to radar
Aerial:
Dual Aerial Tabs
Package Weight:
105.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QF 02/20-03/24

TJM
TJM SIGNATURE BULL BAR POLISHED ALLOY FOR MITSUBISHI PAJERO NX 07/14-ON (IN STORE PICK-UP ONLY)
$3,300.00
A genuine TJM Signature bull bar with sporting sharp looks and cutting-edge performance provides the perfect blend of style and uncompromised protection for your Pajero. This TJM Signature bull bar is 4x4 equipped with a steel winch-mount, integrated DRL/LED fog lights, LED combination lights, dual aerial mounts and mounting points for installing large driving lights. Our high strength, multi-fold alloy channel design is backed by a tough central chassis that mounts securely to your vehicle for maximum frontal protection. Upper pipework provides additional strength, obstacle deflection and headlight protection. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Whether you are in the big smoke or carving out your own adventure, the TJM Signature range is an Aussie legend in the making
MITSUBISHI PAJERO NX 07/14-On

TJM
TJM SIGNATURE BULL BAR POLISHED ALLOY FOR MITSUBISHI PAJERO NS-NT 11/06-09/11 / MITSUBISHI PAJERO NW...
$3,500.00
TJM's genuine Tradesman bull bar blends style and features at a great price for your Triton. The TJM Tradesman bull bar is 4x4 equipped with a steel winch-mount, integrated rated recovery points, LED combination indicator park lights, and reinforced T-slot recovery jack points. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. A stylish 76mm centre tube and 63.5mm outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.
FEATURES:
Material:
Black Powdercoat Steel
Size:
76mm Centre Tube 63mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Integrated 8000kg Rated Recovery Points, Strengthened Hi Lift Jacking Points
Indicators:
LED Indicator Park Lights
Lights:
Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light ranges
Aerial:
Dual Aerial Tabs
Package Weight:
105.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM TRADESMAN BULL BAR BLACK STEEL FOR MITSUBISHI TRITON MQ (IN STORE PICK-UP ONLY)
$1,930.01
TJM's genuine Tradesman bull bar blends style and features at a great price for your Triton. The TJM Tradesman bull bar is 4x4 equipped with a steel winch-mount, integrated rated recovery points, LED combination indicator park lights, and reinforced T-slot recovery jack points. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. A stylish 76mm centre tube and 63.5mm outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.
FEATURES:
Material:
Black Powdercoat Steel
Size:
76mm Centre Tube 63mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Integrated 8000kg Rated Recovery Points, Strengthened Hi Lift Jacking Points
Indicators:
LED Indicator Park Lights
Lights:
Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light ranges
Aerial:
Dual Aerial Tabs
Package Weight:
105.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM TRADESMAN BULL BAR BLACK STEEL FOR MITSUBISHI TRITON MR (IN STORE PICK-UP ONLY)
$1,995.00
TJM's genuine Tradesman bull bar blends style and features at a great price for your Triton. The TJM Tradesman bull bar is 4x4 equipped with a steel winch-mount, integrated rated recovery points, LED combination indicator park lights, and reinforced T-slot recovery jack points. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. Stylish 63.5mm centre tube and outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.
FEATURES:
Material:
Black Steel
Size:
63.5mm
ADR:
Airbag Compliant.
Suits:
Does not suit GLS & GSR models or models fitted with factory park sensors
Tech:
Compatible with forward collision mitigation (FCM) lane departure warning (LDW)
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Integrated 8000kg Rated Recovery Points, Hi Lift Jacking Points
Fog:
Allows for factory supplied QH DRL or QH FOG fitment or upgrade to a finished fit with TJM LED DRL/FOG light kit (425TJMLEDDRL) (check vehicle)
Indicators:
LED Indicator Park Lights
Lights:
Suits up to 230mm dia.
Aerial:
Dual Aerial Tabs
Package Weight:
83.00 kg
Compatible Vehicles
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM OUTBACK BULL BAR BLACK STEEL FOR MITSUBISHI CHALLENGER (IN STORE PICK-UP ONLY)
$2,240.00
The genuine TJM Outback bull bar range offers exceptional frontal protection for your Mitsubishi. Our engineers have spent countless hours perfecting the design of these bars to ensure our customers are equipped with one of the finest products in the market. Full wrap cato straps and 50mm outer pipework provides added strength, damage deflection and headlight protection. This TJM Outback bull bar is 4x4 equipped with a steel winch-mount, combination lights, and reinforced T-slot recovery jack points. Option up to our TJM LED Fog Lights for those foggy mornings. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. Combining classic styling with premium features, TJM's Outback bull bar range offers uncompromised frontal protection for your 4x4. Take the lead with TJM Today.
FEATURES:
Material:
Black Powdercoat Steel
Size:
50mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Strengthened Hi Lift Jacking Points
Fog:
Optional Fog Lights 425TJMLEDFG. If harness required for Fog operation (033WHSPOTFOGSAA)
Indicators:
Indicator Park Lights
Lights:
Recessed light mount (width 75mm x 60mm) in top channel, suits single bolt lights only or LED Light bar please check Light base fits bar recess
Aerial:
Dual Aerial Tabs
Package Weight:
97.50 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15

TJM
TJM TRADESMAN BULL BAR BLACK STEEL FOR MITSUBISHI TRITON (IN STORE PICK-UP ONLY)
$1,800.00
TJM's genuine Tradesman bull bar blends style and features at a great price for your Triton. The TJM Tradesman bull bar is 4x4 equipped with a steel winch-mount, combination indicator park lights, and reinforced T-slot recovery jack points. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. A stylish 63.5mm centre tube and 50mm outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.
FEATURES:
Material:
Black Powdercoat Steel
Size:
63.5mm Centre Tube 50mm Outer Tube
ADR:
Airbag Compliant
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Strengthened Hi Lift Jacking Points
Indicators:
Recessed combination indicator park lights
Lights:
Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light ranges
Aerial:
Dual Aerial Tabs
Package Weight:
73.00 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM OUTBACK BULL BAR BLACK STEEL FOR MITSUBISHI PAJERO NS-NT/ MITSUBISHI PAJERO NW (IN STORE...
$2,300.00
The genuine TJM Outback bull bar range offers exceptional frontal protection for your Pajero. Our engineers have spent countless hours perfecting the design of these bars to ensure our customers are equipped with one of the finest products in the market. Full wrap cato straps and 50mm outer pipework provides added strength, damage deflection and headlight protection. This TJM Outback bull bar is 4x4 equipped with a steel winch-mount and combination indicator park lights. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. Combining classic styling with premium features, TJM's Outback bull bar range offers uncompromised frontal protection for your 4x4.
FEATURES:
Material:
Black Powdercoat Steel
Size:
50mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Winch:
Integrated mount rated to 9500lb/4300kg
Fog:
Optional Fog Lights 425TJMLEDFG. If harness required for Fog operation (033WHSPOTFOGSAA)
Indicators:
Indicator Park Lights
Lights:
Recessed Light Mount (Width 75mm x 60mm) in top channel, suits single bolt lights only or LED Light Bar please check Light base fits bar recess
Aerial:
Dual Aerial Tabs
Package Weight:
96.00 kg
Compatible Vehicles
MITSUBISHI PAJERO NS-NT 11/06-09/11
MITSUBISHI PAJERO NW 10/11-06/14

TJM
TJM OUTBACK BULL BAR BLACK STEEL FOR MITSUBISHI TRITON MR 12/18-02/24 (IN STORE PICK-UP ONLY)
$2,600.00
The genuine TJM Outback bull bar range offers exceptional frontal protection for your Triton. Our engineers have spent countless hours perfecting the design of these bars to ensure our customers are equipped with one of the finest products in the market. Full wrap cato straps and 63mm outer pipework provides added strength, damage deflection and headlight protection. This TJM Outback bull bar is 4x4 equipped with a steel winch-mount, integrated rated recovery points, integrated LED fog lights, LED combination lights, and reinforced T-slot recovery jack points. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. Combining classic styling with premium features, TJM's Outback bull bar range offers uncompromised frontal protection for your 4x4.
FEATURES:
Material:
Black Steel
Size:
63mm
ADR:
A/bag Compliant.
Suits:
All models
Tech:
Compatible with ADAS, AEB, Lane Departure, Parking Sensors, Multi-surround monitor)
Winch:
Integrated mount suit 9500lb/4300kg Hawse only
Recovery:
Integrated 8000kg Rated Recovery Points, Hi Lift Jacking Points
Fog:
Optional Fog Lights 425TJMLEDFG. If harness required for Fog operation (033WHSPOTFOGSAA)(Check for DRL in H/Light or Bumper?)
Indicators:
Combination LED Indicator Park lights
Lights:
Suits TJM Seeker & Ultima light range
Aerial:
Dual Tabs
Package Weight:
112.00 kg
Compatible Vehicles
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM OUTBACK BULL BAR BLACK STEEL FOR MITSUBISHI PAJERO NX 07/14-ON (IN STORE PICK-UP ONLY)
$2,600.00
The genuine TJM Outback bull bar range offers exceptional frontal protection for your Pajero. Our engineers have spent countless hours perfecting the design of these bars to ensure our customers are equipped with one of the finest products in the market. Full wrap cato straps and 63mm outer pipework provides added strength, damage deflection and headlight protection. This TJM Outback bull bar is 4x4 equipped with a steel winch-mount, LED combination lights, and reinforced T-slot recovery jack points. Select our optional LED fog lights and daylight running lights for those foggy mornings. It's ready to work for you with dual aerial mounts and mounting points for installing large driving lights. With premium features, TJM's Outback bull bar range offers frontal protection for your 4x4. Take the lead with TJM.
Material:
Black Powdercoat Steel
Size:
63mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Suits:
All models
Winch:
Integrated mount rated to 9500lb/4300kg
Fog:
Required purchase of LED/DRL Fog Light kit if vehicle has DRL in bumper. 425TJMLEDDRL. Check vehicle. Optional fog lights if no DRL 425TJMLEDFG. Bar comes standard with blanks only. If Harness Req (033WHSPOTFOGSAA)
Indicators:
Combination LED Indicator Park Lights
Lights:
Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light range
Aerial:
Dual Aerial Tabs
Package Weight:
79.00 kg
Compatible Vehicles
MITSUBISHI PAJERO NX 07/14-On

TJM
TJM OUTBACK BULL BAR BLACK STEEL FOR MITSUBISHI TRITON (IN STORE PICK-UP ONLY)
$2,300.00
The genuine TJM Outback bull bar range offers exceptional frontal protection for your Mitsubishi. Our engineers have spent countless hours perfecting the design of these bars to ensure our customers are equipped with one of the finest products in the market. Full wrap cato straps and 50mm outer pipework provides added strength, damage deflection and headlight protection. This TJM Outback bull bar is 4x4 equipped with a steel winch-mount, combination lights, and reinforced T-slot recovery jack points. Option up for those foggy mornings to our TJM LED Fog light kit. With dual aerial mounts and mounting points for installing large driving lights. Combining classic styling with premium features, TJM's Outback bull bar range offers uncompromised frontal protection for your 4x4. Take the lead with TJM.
FEATURES:
Material:
Black Powdercoat Steel
Size:
50mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Strengthened Hi Lift Jacking Points
Fog:
Optional Fog Lights 425TJMLEDFG. If harness required for Fog operation (033WHSPOTFOGSAA)
Indicators:
Indicator Park Lights
Lights:
Recessed light mount (width 75mm x 60mm) in top channel, suits single bolt lights only or LED Light bar please check Light base fits bar recess
Aerial:
Dual Aerial Tabs
Package Weight:
95.00 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM FRONT PARKER LAMP KIT SUIT CHASER BULL BARS - PAIR FOR ISUZU D-MAX /...
$115.01
Delivering product to meet all Australian design rules this TJM Front park light lamp kit is required for most TJM Chaser Bullbar fitments. Consult the information regarding the specific Chaser bull bar to choose the correct light.
Package Weight:
0.10 k
Compatible Vehicles
ISUZU D-MAX TF 06/12-01/17 Space C/Chas & Pick Up
ISUZU D-MAX TF 06/12-01/17 4Dr C/Chas & Pickup
ISUZU D-MAX TF 02/17-07/20 Space C/Chas & Pick Up
ISUZU D-MAX TF 02/17-07/20 4Dr C/Chas & Pick Up
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
XGS LEAF SPRING REAR RAISED 550KG (1 ONLY) FOR MITSUBISHI TRITON
$425.00
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
40mm±5mm @ 550kg
No. of Leaves:
5+2 + Caster Wedge
Free Camber:
133mm +/- 5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Package Weight:
33.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
XGS COIL SPRINGS REAR RAISED 150KG / 200KG (PAIR) FOR MITSUBISHI PAJERO
$415.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Rear
LBA:
150kg (LWB) / 200kg (SWB)
Lift:
0-40mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
20.00 kg
Compatible Vehicles
MITSUBISHI PAJERO NS-NT 11/06-09/11
MITSUBISHI PAJERO NW 10/11-06/14
MITSUBISHI PAJERO NX 07/14-On
MITSUBISHI PAJERO NM-NP 05/00-10/06

TJM
TJM SIGNATURE BULL BAR POLISHED ALLOY FOR MITSUBISHI TRITON MR 12/18-02/24 (IN STORE PICK-UP ONLY)
$3,950.00
A genuine TJM Signature bull bar with sporting sharp looks and cutting-edge performance provides the perfect blend of style and uncompromised protection for your Triton. This TJM Signature bull bar is 4x4 equipped with a steel winch-mount, integrated rated recovery points, LED fog lights, LED combination lights, dual aerial mounts and mounting points for installing driving lights. Our high strength, multi-fold alloy channel design is backed by a tough central chassis that mounts securely to your vehicle for maximum frontal protection. Upper pipework provides additional strength, obstacle deflection and headlight protection. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Whether you are in the big smoke or carving out your own adventure, the TJM Signature range is an Aussie legend in the making. Take the Lead with TJM.
FEATURES:
Material:
Polished Alloy
Size:
76mm Centre Tube 63mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Suits:
All models
Tech:
Compatible with ADAS system (AEB, Lane departure, parking sensors, and multi-surround monitor)
Winch:
Integrated mount rated to 9500lb/4300kg
Recovery:
Integrated 8000kg Rated Recovery Points
Fog:
For models with the DRL in the headlight use Optional TJM LED Fog light Kit 425TJMLEDDRL. Models with DRL in the bumper require TJM FOG/DRL Light Kit 425TJMLEDDRL.
Indicators:
Combination LED Indicator Park Lights
Lights:
Suits most TJM Seeker & TJM Ultima Light range
Aerial:
Dual Aerial Tabs
Package Weight:
72.00 kg
Compatible Vehicles
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY MITSUBISHI TRITON MR DC WHITE DIAMOND W85 FOR MITSUBISHI TRITON MR 12/18-02/24...
$4,799.00
The new TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come.
Colour:
White Diamond W32
Suit:
Dual Cab
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up
Construction:
Fiberglass
Finish:
Smooth exterior, felt lined interior
Light:
LED Brake Light ad LED Interior Light
Standard Accessories:
Roof Rail,, Rear Spoiler
Optional Accessories:
Rhino Roof Racks (100 kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY MITSUBISHI TRITON MR D/C BLACK PEARL FOR MITSUBISHI TRITON MQ 04/15-11/18 /...
$4,799.00
The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come!
Colour:
Black Pearl X37
Suit:
Dual Cab
Central Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up
Construction:
Fibreglass
Finish:
Smooth exterior, felt lined interior
Lights:
LED Brake Light ad LED Interior Light
Standard Accessories:
Roof Rail Rear Spoiler
Optional Accessories:
Rhino Roof Racks (100 kg rated), Internal Support Systems
Warranty:
2 years
Warranty:
3 years on canopy shell, 1 year on componentry
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY D/C STERLING SILVER U25 FOR MITSUBISHI TRITON MQ 04/15-11/18 / MITSUBISHI TRITON...
$4,799.00
The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come!
FEATURES:
Colour:
Sterling Silver U25
Suits:
Dual Cab
Cental Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up.
Construction:
Fibreglass
Finish:
Smooth exterior, felt lined interior.
Lights:
LED Brake Light and LED Interior Light
Standard Accessories:
Roof Rails, Rear Spoiler
Optional Accessories
Rhino Roof Racks (100kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY D/C BLACK PEARL X08 FOR MITSUBISHI TRITON MQ 04/15-11/18 4DR C/C &...
$4,799.00
The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come!
FEATURES:
Colour:
Black Pearl X08
Suits:
Dual Cab
Cental Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up.
Construction:
Fibreglass
Finish:
Smooth exterior, felt lined interior.
Lights:
LED Brake Light and LED Interior Light
Standard Accessories:
Roof Rails, Rear Spoiler
Optional Accessories
Rhino Roof Racks (100kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY MITSUBISHI TRITON MR D/C TITANIUM GREY FOR MITSUBISHI TRITON MQ 04/15-11/18 4DR...
$4,799.00
The TJM Premium Canopy for the Mitsubishi Triton MR D/C is a perfect blend of style and functionality. The titanium grey finish adds a sleek look to your vehicle, while its sturdy construction provides reliable protection for your belongings.
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

TJM
TJM PREMIUM CANOPY MITSUBISHI TRITON MR D/C WHITE W32 FOR MITSUBISHI TRITON MQ 04/15-11/18/ MITSUBISHI...
$4,799.00
*Please note that images are for illustration purposes only. The TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. Your cargo will be kept safe and secured in style for many years to come!
Colour:
White W32
Suit:
Dual Cab
Central Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up
Construction:
Fibreglass
Finish:
Smooth exterior, felt lined interior
Lights:
LED Brake Light ad LED Interior Light
Standard Accessories:
Roof Rail, Rear Spoiler
Optional Accessories:
Rhino Roof Racks (100 kg rated), Internal Support Systems
Warranty:
2 years
Warranty:
Package Weight:
90.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up