Make

The Direction-Plus™ TR+ Throttle Controller TR0801DP fits Nissan Patrol GU ZD30 (3.0L 4cyl) 2006-2018 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! NOTE: This TR+ throttle controller model is only suited to common rail vehicles (CRD) due a changeover in 2006/07 where the throttles are completely different. CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0830DP fits Holden Colorado (2008-2012), Rodeo (2007-2008); Isuzu D-Max (2012-2022) and MU-X (2013-2022) ; Mazda BT-50 (2020-2022) Toyota Hilux 1GD-FTV (2016-2022) 2GD-FTV (2018-2022), Fortuner 1GD-FTV (2016-2022), Landcruiser 70 (2007-2022), 200 series (2007-2022) and 300 series (2022), Prado 150 1GD-FTV (2015-2021) and 155 series 1GD-FTV (2015-2022) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

The Direction-Plus™ TR+ Throttle Controller TR0715DP fits Everest / Ranger / Raptor and BT-50 models. The  TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power! CUSTOMISABLE SETTINGS The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences. The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)

Ranger PX2 (08/16-07/19) Inc. Facelift Model Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + Ranger PX2 (05/15-07/16) Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + BT50 (06/18-09/20) XTR Dual Cab (Facelift) + BT50 (01/17-05/18) Series 2 Dual Cab XTR/XT/Freestyle XTR/XT Single Cab + BT50 (05/15-12/16) Series 2 Dual Cab XTR/XT/Freestyle XTR/XT Single Cab

3″ DPF BACK EXHAUST FOR TOYOTA 78 SERIES 4.5L LANDCRUISER: 08/2016 PERFORMANCE GAIN: 11KW / 28NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this Torqit exhaust system. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new Torqit exhaust. Together, they provide improved drivability, quicker acceleration, and a more responsive driving experience on and off the road. Offer available while stocks last. Upgrade your Toyota 78 Series LandCruiser with Torqit's 3" exhaust system, designed to deliver maximum power, torque, and reliability across all terrains. Built for towing, touring, and serious off-roading, this 3" DPF Back Exhaust enhances airflow, reduces exhaust gas temperatures (EGTs), and produces a deep, clean exhaust note—taking the legendary performance of the Troopy to the next level. The tough 304 grade stainless steel is up to 2mm thick, producing a deep exhaust note while guaranteeing exceptional strength across all terrains. Manufactured from premium 304 grade stainless steel, the three-bolt laser-cut flanges are TIG welded internally and externally for maximum durability during heavy-duty off-road use. As this 78 Series Troopy Exhaust bolts onto the back of the DPF, it complies with all regulations and insurance requirements while keeping your vehicle warranty intact. The DPF Back LandCruiser system improves exhaust gas flow, lowering exhaust gas temperatures (EGTs). Reducing EGTs helps improve the air-to-fuel ratio (AFR), enhancing engine efficiency, fuel economy, and long-term reliability without the legal ramifications of removing the DPF. Combine this Troopy exhaust system with additional performance upgrades to unlock your vehicle's full potential. PERFORMANCE EXHAUST FEATURES Thick Stainless Steel Manufactured from stainless steel up to 2mm thick, Torqit Performance Exhausts are built to withstand extreme temperatures and harsh off-road conditions while producing a deep exhaust note without cabin drone. Premium 304 Grade Stainless Steel Torqit uses premium 304 grade stainless steel for superior corrosion resistance, strength and longevity. Ideal for off-road vehicles regularly exposed to mud, water crossings and coastal environments. Internal & External TIG Welds All flanges are TIG welded internally and externally to maximise structural strength, reduce fatigue and prevent exhaust leaks, ensuring long-lasting reliability. Mandrel Bent System Each exhaust is precision mandrel bent to maintain consistent pipe diameter, improving exhaust flow, reducing back pressure and ensuring an accurate factory-style fit. INSTALLATION This 3" DPF Back Exhaust is a DIY bolt-together system that requires no hoist for installation. It includes detailed fitting instructions and a complete fitting kit, allowing installation in under an hour using basic hand tools. FEATURES Brushed stainless steel tubing up to 2mm thick Premium 304 grade stainless steel construction Fully mandrel bent system TIG welded throughout Three-bolt laser-cut flanges with internal and external welds Heavy-duty wrap-around brackets Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems (vehicle-specific conditions apply) Please Note: Aftermarket accessories such as long-range fuel tanks and suspension upgrades should be considered before ordering. Contact our team for compatibility advice. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional dispatch time.

3" SINGLE EXIT EXHAUST FOR TOYOTA 79 SERIES 4.5L DUAL CAB LANDCRUISER: 08/2016 ON PERFORMANCE GAIN: 8KW / 26NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. The Toyota 79 Series Dual Cab is renowned as one of Australia's toughest and most dependable workhorses. TORQIT's 3" DPF Back Single Exit Performance Exhaust is engineered to maximise power, torque and reliability while delivering the perfect balance of performance, sound and durability. Manufactured from premium 304 grade brushed stainless steel, this fully mandrel bent exhaust system features tubing up to 2mm thick for exceptional strength and corrosion resistance. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally to withstand demanding towing, touring and off-road conditions. Designed to bolt directly behind the DPF, this exhaust improves exhaust gas flow to help lower exhaust gas temperatures (EGTs), improve engine efficiency and optimise fuel economy while remaining fully compliant with manufacturer warranty and insurance requirements. It delivers a deep, refined exhaust note without unwanted cabin drone. KEY FEATURES 3" DPF Back Single Exit Performance Exhaust Performance gain of up to 8KW / 26NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Three-bolt laser-cut flanges Heavy-duty wrap-around brackets Stainless steel resonator for a deep exhaust note DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems TOOLBOX CLEARANCE If your vehicle is fitted with a toolbox, allow a minimum clearance of 165mm measured from the inside wall of the tray to ensure correct exhaust fitment. INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can typically be installed in under an hour using a basic socket set and spanners. Please Note: Compatible with LRA, Long Ranger, Frontier Long Range and Brown Davis long-range fuel tanks. If your vehicle has additional aftermarket accessories, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional time before dispatch.

3″ TURBO BACK EXHAUST FOR TOYOTA 79 SERIES 4.2L LANDCRUISER: 11/1999 – 12/2006 PERFORMANCE GAIN: 15KW / 77NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. Upgrade your Toyota LandCruiser 79 Series 4.2L with TORQIT's premium 3" Turbo Back Performance Exhaust. Designed for maximum power, torque and durability, this Australian-engineered exhaust system is built to handle harsh touring, towing and off-road conditions while delivering the deep exhaust note Torqit is renowned for. Manufactured from premium 304 grade brushed stainless steel, this fully mandrel bent exhaust system features tubing up to 2mm thick for exceptional strength and corrosion resistance. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally to withstand demanding Australian conditions. Running from the turbo back, the system incorporates a high-flow diesel catalytic converter, double braided stainless steel flex bellows and exclusive titanium-coated dump pipes. Together these components improve exhaust flow, reduce exhaust gas temperatures (EGTs), increase engine efficiency and help protect critical engine components during heavy-duty use. The brushed stainless steel finish, premium construction and deep exhaust note make this the ideal upgrade for owners wanting improved performance without sacrificing long-term reliability. KEY FEATURES 3" Turbo Back Performance Exhaust Performance gain of up to 15KW / 77NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Three-bolt laser-cut flanges Heavy-duty wrap-around brackets High-flow diesel catalytic converter Titanium-coated dump pipes for improved heat management Double braided stainless steel flex bellows Stainless steel resonator/muffler Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can typically be installed in approximately two hours using a basic socket set and spanners. No hoist is required for installation. VEHICLE COMPATIBILITY Toyota LandCruiser 79 Series 4.2L Turbo Diesel (11/1999 – 12/2006) Compatible with LRA, Long Ranger, Frontier Long Range and Brown Davis Long Range fuel tanks Please Note: If your vehicle has additional aftermarket accessories, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch.

3″ TURBO BACK EXHAUST FOR TOYOTA 78 SERIES 4.5L LANDCRUISER: 03/2007 – 07/2016 PERFORMANCE GAIN: 17KW / 39NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last Upgrade your Toyota 78 Series Troop Carrier with TORQIT's premium 3" Turbo Back Performance Exhaust. Designed to maximise power, torque and engine efficiency, this Australian-engineered exhaust system is built for serious touring, towing and off-road adventures while delivering the deep V8 exhaust note TORQIT is renowned for. Manufactured from premium 304 grade brushed stainless steel, this fully mandrel bent exhaust system features tubing up to 2mm thick for outstanding strength and corrosion resistance. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally to withstand Australia's toughest driving conditions. Running from the turbo back, the system incorporates a high-flow diesel catalytic converter, double braided stainless steel flex bellows and exclusive titanium-coated dump pipes. Together these components improve exhaust flow, reduce exhaust gas temperatures (EGTs), improve engine efficiency and help protect critical engine components for long-term reliability. The premium stainless steel construction delivers a deep V8 exhaust note without excessive cabin drone, making it ideal for everyday driving, heavy towing and long-distance touring. KEY FEATURES 3" Turbo Back Performance Exhaust Performance gain of up to 17KW / 39NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Three-bolt laser-cut flanges Heavy-duty wrap-around brackets High-flow diesel catalytic converter Titanium-coated dump pipes for improved heat management Double braided stainless steel flex bellows Deep V8 exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can typically be installed in approximately two hours using a basic socket set and spanners. No hoist is required, making it ideal for experienced DIY installers. VEHICLE COMPATIBILITY Toyota LandCruiser 78 Series 4.5L Troop Carrier (03/2007 – 07/2016) Please Note: If your vehicle has aftermarket accessories such as long-range fuel tanks or suspension upgrades, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch.

Upgrade your ride with the durable stainless steel Torqit Turbo Back Exhaust. Suit Nissan D40 Navara. Unleash the power and dominate the road.

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

BUNDLE & SAVE!! Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Combo Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong! The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Ultimate Catch Can Combo Kit – FMPV613DPC is designed and engineered in Australia to suit: Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2011-2015 Vehicles with updated master cylinder only (with VSC) HOW DOES IT WORK? FUEL MANAGER PRE-FILTER Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked PROVENT ULTIMATE CATCH CAN Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit (PF664DPK) is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure. This kit fits: Ford Everest YNWS (2.0L 4cyl) 2018 – 2022 Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022 Ford Ranger Raptor YN2S (2.0L 4cyl) 2018 – 2022 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF622DPK is designed and engineered in Australia to suit Toyota Prado 120, 150 and 155 models, protecting its engine against costly injector failure. This kit fits: Toyota Prado 120 Series 1KD-FTV (3.0L 4cyl) 2003 – 2009 Toyota Prado 120 Series 1KZ-TE (3.0L 4cyl) 2003 – 2007 Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl) 2009 – 2015 Dual battery compatible Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2015 – On Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2015 – On PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF617DPK is designed and engineered in Australia to suit Nissan Navara D22 models, protecting its engine against costly injector failure. This kit fits: Nissan Navara D22 YD25DDTi (2.5L 4cyl) 2002 – 2009 Not dual battery compatible PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Fuel Manager Post-Filter Kit PF612DPK is designed and engineered in Australia to suit Toyota Hilux (1KD-FTV) models, protecting its engine against costly injector failure. This kit fits: Toyota Hilux 1KD-FTV (3.0L 4cyl) 2004 – 2015 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure. All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination. BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD: Reduce wear & tear and avoid repair costs that can exceed $10,000 Superior particle removal down to 2 micron* Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked  Check fitment guide below to confirm suitability for your vehicle.

Direction Plus™ Ryco Pre-Filter Kit RC612DPK is designed and engineered in Australia to suit Toyota Hilux (1KD-FTV) models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles. This kit fits: Toyota Hilux 1KD-FTV (3.0L 4cyl) 2004 – 2006 Toyota Hilux 1KD-FTV (3.0L 4cyl) 2008 – 2009 Toyota Hilux 1KD-FTV (3.0L 4cyl) 2009 – 2015 PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water. HOW IT WORKS Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A RYCO PRE-FILTER KIT: Isolate water before it journeys through your fuel system causing damage. Protect your fuel system from corrosion of metal components that left unaddressed can cause expensive damage to your fuel system. Reduce micro-bacterial growth caused by water contamination, which can reduce engine durability and performance. Remove other contaminants down to 10 microns, meaning your OE filter does not have to work as hard. Water resistant silicone coated filter media provides maximum efficiency, life and flow Maximum working Pressure 87 PSI/6 bar/600 kPa Give you a visible or audible alert to water in your fuel system allowing you to take action to protect your engine (when used with S102XK and S101X accessories). Allow you to easily drain water from your fuel system multiple times to get to safety or a mechanical workshop. Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards  Check fitment guide below to confirm suitability for your vehicle.

The TransChill Arctic Black Transmission cooler kit TCB671DPK fits: Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The Transchill Arctic Black Transmission cooler kit TCB635DPK fits: Toyota Landcruiser 300 Series F33A-FTV (3.3L 6cyl) 2022 – On * Vehicles with standard bumper may require minor trimming of some plastic bumper supports. This transmission cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

The TransChill Arctic Black Transmission cooler kit TCB612DPK fits Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2004-2015 & 1GR (4.0L 6cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting. New & Improved model Designed and engineered in Australia 32mm, 14 row fin & plate design allows for extreme cooling Durable Black powder coat resists oxidisation 100% pressure tested at 150psi for quality assurance Internal tubulation for efficient heat transfer Up to 50% more efficient (*heat transfer rate – BTU/hr) Pre-drilled mounting plates for easy installation Inlet & Outlet size: M16 fittings WHY DO YOU NEED ONE? Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates. HOW IT WORKS The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components. AUTOMATIC TRANSCHILL CONTENTS: Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets All mounting hardware included ATF Hose (Meets or exceeds SAE J1019 requirements) 1x Davies Craig Black 32mm 14 row oil cooler 3yr Warranty *Conditions apply

Direction Plus™ Fuel Manager Pre-Filter Kit FM664DPK is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure. This kit fits: Ford Everest YNWS (2.0L 4cyl) 2018 – 2022Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022PROTECT YOUR ENGINEIt’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true! Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. HOW IT WORKSInstalling a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year. BENEFITS OF A FUEL MANAGER PRE-FILTER KIT: Reduce wear & tear and avoid repair costs that can exceed $10,000 95% water separation and superior particle removal Ability to separate emulsified water from ULSD Clear water drainage bowl to easily identify removed water Keeps critical engine components clean No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked Check fitment guide below to confirm suitability for your vehicle.

PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION   Direction-Plus ProVent Ultimate Catch Can kit (PV613DPK) comes with a Provent 200 filter and is designed and engineered in Australia to suit: Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2011-2015 -Vehicles with updated master cylinder only (with VSC) Direction-Plus ProVent Ultimate Catch Can kit PV613DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. PROTECTS AGAINST COSTLY REPAIRS AND POOR PERFORMANCE The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure. HOW IT WORKS Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance. BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT: Prevents oil and soot contamination entering the clean air intake Excellent protection for turbocharger Minimises oil consumption* Prevents oil buildup in intercoolers Regulates crankcase pressure Keeps critical engine components clean Reduces exhaust smoke and odours 98% oil separation efficiency Saves you money *Only in installations where the oil is returned to the sump

The Direction-Plus™ PreLine-Plus Pre-Filter + ProVent Combo Kit PLPV620DPC fits: Toyota Prado 150 series 1KD-FTV (3.0L 4cyl) 2009-2015 This is the ultimate defence against carbon build-up and water contamination with the PreLine-Plus pre-filter kit, with 100% efficiency and up to 98% oil separation efficiency with our ProVent kit. With this dual kit you can‘t go wrong! Protect your investment 24 hours a day, 365 days a year. HOW IT WORKS PRELINE-PLUS PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water. PROVENT ULTIMATE CATCH CAN Direction Plus™ ProVent Ultimate Catch Can protects your diesel engine by reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus™ ProVent Ultimate Catch Can system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus™ ProVent Ultimate Catch Can system is specifically designed to separate and redirect oil and air from blow-by gas produced from within the crankcase as it also provides the option of returning the oil back to the sump.

The Direction-Plus™ PreLine-Plus / Provent Dual Kit PLPV664DPK is The Ultimate Defence against carbon build-up and water contamination. It fits Ford Everest and Raptor models. The Dual Kit with our Preline-Plus offering up 100% water separation efficiency* and our ProVent withup to a massive 98% oil separation efficiency, including all parts needed you can‘t go wrong! Protect your investment 24 hours a day, 365 days a year. PROTECTION AGAINST WATER CONTAMINATION Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a 100% of water separation and 98% of particle pre-separation. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. PROTECTION AGAINST OIL & SOOT CONTAMINATION Direction-Plus™ ProVent® oil separator kit protects your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system

Direction-Plus™ ProVent® oil separator kit PV618DPK is designed to suit Nissan Navara D40 models and to protect its diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. HOW IT WORKS Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance.

Direction-Plus™ PreLine-Plus PL664DPK is an innovative pre-filter system for diesel fuel which suits Ford Everest, Ranger, Raptor PXIII Bi Turbo models. PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation. WATER SEPARATION EFFICIENCY With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.

Direction-Plus™ PreLine-Plus Pre-Filter Kit PL660DPK fits Toyota Prado 120 models. It is an innovative pre-filter system for diesel fuel systems which ensures 100% of water (based on 300um droplet size) and 98% particle pre-separation (based on 30micron particles). Designed specifically to cope with extreme weather conditions and poor fuel quality, it is the perfect choice for drivers in Australia. 100% WATER SEPARATION With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced. WATER ALERT SYSTEM INCLUDED The PreLine-Plus Pre-Filter kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.

3.5″ TWIN EXIT EXHAUST FOR TOYOTA 79 SERIES 4.5L DUAL CAB LANDCRUISER: 08/2012 – 07/2016 PERFORMANCE GAIN: 23KW / 91NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling demanding off-road conditions. Offer available while stocks last. Built for Australia's toughest working utes, the TORQIT 3.5" Twin Exit Performance Exhaust transforms the Toyota 79 Series Dual Cab with increased power, torque and an unmistakable deep V8 exhaust note. Engineered for towing, touring and heavy-duty off-road use, this turbo back exhaust delivers the perfect balance of performance, durability and premium sound. Manufactured from premium 304 grade brushed stainless steel, the fully mandrel bent system features tubing up to 2mm thick for maximum strength and corrosion resistance. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally to withstand harsh off-road environments while maintaining long-term reliability. The system features a 3.5" pipe from the turbo transitioning into dual 3" tailpipes, complete with high-flow diesel catalytic converters, double braided flex bellows and exclusive titanium-coated dump pipes. Together, these components improve exhaust flow, reduce exhaust gas temperatures (EGTs), protect engine components and maximise overall engine efficiency. KEY FEATURES 3.5" Turbo Back Twin Exit Performance Exhaust Performance gain of up to 23KW / 91NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system High-flow diesel catalytic converter Titanium-coated dump pipes for improved heat management Double braided stainless steel flex bellows Heavy-duty TIG welded construction Deep V8 exhaust note without cabin drone DIY bolt-together design Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together system includes a complete fitting kit and typically requires approximately three hours to install. DIY installation is possible, although professional installation is recommended as access to the turbo may require a hoist. VEHICLE COMPATIBILITY Toyota LandCruiser 79 Series 4.5L Dual Cab (08/2012 – 07/2016) Compatible with LRA, Long Ranger, Frontier Long Range and Brown Davis long-range fuel tanks If fitted with OME BP51 Remote Reservoir shocks, ARB relocation bracket (Part No. VM80010002) is required Please Note: If your vehicle has additional aftermarket accessories, contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional dispatch time.

3″ SINGLE EXIT EXHAUST FOR TOYOTA 79 SERIES 4.5L SINGLE CAB LANDCRUISER: 08/2016 ON PERFORMANCE GAIN: 8KW / 26NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling demanding off-road conditions. Offer available while stocks last. The Toyota 79 Series Single Cab is one of Australia's most trusted workhorses, built for demanding jobs and harsh off-road conditions. TORQIT's 3" DPF Back Single Exit Performance Exhaust is engineered to maximise power, torque and engine efficiency while delivering the perfect balance of durability, performance and sound. Manufactured from premium 304 grade brushed stainless steel, this fully mandrel bent exhaust system features tubing up to 2mm thick for exceptional strength and corrosion resistance. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally to withstand serious towing, touring and off-road use. Designed to bolt directly behind the DPF, this exhaust improves exhaust gas flow to help lower exhaust gas temperatures (EGTs), improve engine efficiency and optimise fuel economy while remaining fully compliant with manufacturer warranty and insurance requirements. The stainless steel resonator produces a deep exhaust note without unwanted cabin drone. KEY FEATURES 3" DPF Back Single Exit Performance Exhaust Performance gain of up to 8KW / 26NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Three-bolt laser-cut flanges Heavy-duty wrap-around brackets Stainless steel resonator/muffler Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can typically be installed in under an hour using a basic socket set and spanners. TOOLBOX CLEARANCE If your vehicle is fitted with a toolbox, allow a minimum clearance of 165mm measured from the inside wall of the tray to ensure correct exhaust fitment. VEHICLE COMPATIBILITY Toyota LandCruiser 79 Series 4.5L Single Cab (08/2016 Onwards) Compatible with LRA, Long Ranger, Frontier Long Range and Brown Davis Long Range fuel tanks Please Note: Fuel economy improvements will vary depending on driving style and vehicle setup. If your vehicle has additional aftermarket accessories, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch.

The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines. With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems. PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.

Direction-Plus™ PreLine-Plus Pre-filter kit PL628DPK fits in Toyota Hilux and Fortuner. PROTECTION FROM CORROSION AND ABRASION Direction-Plus™ PreLine-Plus Pre-filter kit is an innovative pre-filter system designer for diesel fuel systems which will ensure a high degree of water and particle pre-separation protecting your fuel system from corrosion and abrasion. The kit also includes an intuitive multi-stage water alert that will notify when it is necessary to drain the filter.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines. With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems. PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction-Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction-Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.